scholarly journals Gaussian-Process-Based Surrogate for Optimization-Aided and Process-Variations-Aware Analog Circuit Design

Electronics ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 685 ◽  
Author(s):  
Adriana Sanabria-Borbón ◽  
Sergio Soto-Aguilar ◽  
Johan Estrada-López ◽  
Douglas Allaire ◽  
Edgar Sánchez-Sinencio
Keyword(s):  
Gaussian Process ◽  
Integrated Circuit ◽  
Surrogate Model ◽  
Analog Circuit ◽  
Performance Metrics ◽  
Low Cost ◽  
Optimization Algorithms ◽  
Process Variations ◽  
Building Blocks ◽  
Circuit Simulations

Optimization algorithms have been successfully applied to the automatic design of analog integrated circuits. However, many of the existing solutions rely on expensive circuit simulations or use fully customized surrogate models for each particular circuit and technology. Therefore, the development of an easily adaptable low-cost and efficient tool that guarantees resiliency to variations of the resulting design, remains an open research area. In this work, we propose a computationally low-cost surrogate model for multi-objective optimization-based automated analog integrated circuit (IC) design. The surrogate has three main components: a set of Gaussian process regression models of the technology’s parameters, a physics-based model of the MOSFET device, and a set of equations of the performance metrics of the circuit under design. The surrogate model is inserted into two different state-of-the-art optimization algorithms to prove its flexibility. The efficacy of our surrogate is demonstrated through simulation validation across process corners in three different CMOS technologies, using three representative circuit building-blocks that are commonly encountered in mainstream analog/RF ICs. The proposed surrogate is 69 X to 470 X faster at evaluation compared with circuit simulations.

A Gaussian Process-Based Crack Pattern Modeling Approach for Battery Anode Materials Design

2020 ◽  
Vol 18 (1) ◽  
Author(s):  
Zhuoyuan Zheng ◽  
Bo Chen ◽  
Yanwen Xu ◽  
Nathan Fritz ◽  
Yashraj Gurumukhi ◽  
...  
Keyword(s):  
Gaussian Process ◽  
Surrogate Model ◽  
Lithium Ion ◽  
Building Blocks ◽  
Electrochemical Process ◽  
Fe Model ◽  
Model Framework ◽  
Major Drawback ◽  
Cracking Behavior ◽  
Si Anode

Abstract Silicon-based anodes are one of the promising candidates for the next generation high-power/energy density lithium ion batteries (LIBs). However, a major drawback limiting the practical application of the Si anode is that Si experiences a significant volume change during lithiation/delithiation, which induces high stresses causing degradation and pulverization of the anode. This study focuses on crack initiation within a Si anode during the delithiation process. A multi-physics-based finite element (FE) model is built to simulate the electrochemical process and crack generation during delithiation. On top of that, a Gaussian process (GP)-based surrogate model is developed to assist the exploration of the crack patterns within the anode design space. It is found that the thickness of the Si coating layer, TSi, the yield strength of the Si material, σFc, the cohesive strength between Si and the substrate, σFs, and the curvature of the substrate, ρ, have large impacts on the cracking behavior of Si. This coupled FE simulation-GP surrogate model framework is also applicable to other types of LIB electrodes and provides fundamental insights as building blocks to investigate more complex internal geometries.

Analog Circuit Failure Analysis Using Time-Resolved Emission

2005 ◽  
Author(s):  
B.J. Cain ◽  
G.L. Woods ◽  
A. Syed ◽  
R. Herlein ◽  
Toshihiro Nomura
Keyword(s):  
Analog Circuits ◽  
Integrated Circuit ◽  
Analog Circuit ◽  
Photon Emission ◽  
Nonlinear Process ◽  
Time Resolved ◽  
Non Invasive ◽  
Highly Nonlinear ◽  
Excellent Spatial Resolution ◽  
5 Ghz

Abstract Time-Resolved Emission (TRE) is a popular technique for non-invasive acquisition of time-domain waveforms from active nodes through the backside of an integrated circuit. [1] State-of-the art TRE systems offer high bandwidths (> 5 GHz), excellent spatial resolution (0.25um), and complete visibility of all nodes on the chip. TRE waveforms are typically used for detecting incorrect signal levels, race conditions, and/or timing faults with resolution of a few ps. However, extracting the exact voltage behavior from a TRE waveform is usually difficult because dynamic photon emission is a highly nonlinear process. This has limited the perceived utility of TRE in diagnosing analog circuits. In this paper, we demonstrate extraction of voltage waveforms in passing and failing conditions from a small-swing, differential logic circuit. The voltage waveforms obtained were crucial in corroborating a theory for some failures inside an 0.18um ASIC.

Programmable Integrated Photonics

2020 ◽  
Author(s):  
José Capmany ◽  
Daniel Pérez
Keyword(s):  
Integrated Circuit ◽  
Performance Monitoring ◽  
Low Cost ◽  
Limiting Factors ◽  
External Control ◽  
Integrated Photonics ◽  
New Paradigm ◽  
Photonic Integrated Circuit ◽  
And Performance ◽  
Application Fields

Programmable Integrated Photonics (PIP) is a new paradigm that aims at designing common integrated optical hardware configurations, which by suitable programming can implement a variety of functionalities that, in turn, can be exploited as basic operations in many application fields. Programmability enables by means of external control signals both chip reconfiguration for multifunction operation as well as chip stabilization against non-ideal operation due to fluctuations in environmental conditions and fabrication errors. Programming also allows activating parts of the chip, which are not essential for the implementation of a given functionality but can be of help in reducing noise levels through the diversion of undesired reflections. After some years where the Application Specific Photonic Integrated Circuit (ASPIC) paradigm has completely dominated the field of integrated optics, there is an increasing interest in PIP justified by the surge of a number of emerging applications that are and will be calling for true flexibility, reconfigurability as well as low-cost, compact and low-power consuming devices. This book aims to provide a comprehensive introduction to this emergent field covering aspects that range from the basic aspects of technologies and building photonic component blocks to the design alternatives and principles of complex programmable photonics circuits, their limiting factors, techniques for characterization and performance monitoring/control and their salient applications both in the classical as well as in the quantum information fields. The book concentrates and focuses mainly on the distinctive features of programmable photonics as compared to more traditional ASPIC approaches.

scholarly journals A Low-Cost Jamming Detection Approach Using Performance Metrics in Cluster-Based Wireless Sensor Networks

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1179
Author(s):  
Carolina Del-Valle-Soto ◽  
Carlos Mex-Perera ◽  
Juan Arturo Nolazco-Flores ◽  
Alma Rodríguez ◽  
Julio C. Rosas-Caro ◽  
...  
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Performance Metrics ◽  
Low Cost ◽  
Detection Algorithm ◽  
Anomalous Behavior ◽  
Wireless Sensor ◽  
Jamming Detection ◽  
Minimal Energy Expenditure

Wireless Sensor Networks constitute an important part of the Internet of Things, and in a similar way to other wireless technologies, seek competitiveness concerning savings in energy consumption and information availability. These devices (sensors) are typically battery operated and distributed throughout a scenario of particular interest. However, they are prone to interference attacks which we know as jamming. The detection of anomalous behavior in the network is a subject of study where the routing protocol and the nodes increase power consumption, which is detrimental to the network’s performance. In this work, a simple jamming detection algorithm is proposed based on an exhaustive study of performance metrics related to the routing protocol and a significant impact on node energy. With this approach, the proposed algorithm detects areas of affected nodes with minimal energy expenditure. Detection is evaluated for four known cluster-based protocols: PEGASIS, TEEN, LEACH, and HPAR. The experiments analyze the protocols’ performance through the metrics chosen for a jamming detection algorithm. Finally, we conducted real experimentation with the best performing wireless protocols currently used, such as Zigbee and LoRa.

An experimental study on feature-based SLAM for multi-legged robots with RGB-D sensors

2017 ◽  
Vol 44 (4) ◽  
pp. 428-441 ◽  
Author(s):  
Michał R. Nowicki ◽  
Dominik Belter ◽  
Aleksander Kostusiak ◽  
Petr Cížek ◽  
Jan Faigl ◽  
...  
Keyword(s):  
Performance Metrics ◽  
State Of The Art ◽  
Building Blocks ◽  
Bundle Adjustment ◽  
The State ◽  
Legged Robots ◽  
Evaluation Methodology ◽  
Walking Robots ◽  
Content Type ◽  
Feature Based

Purpose This paper aims to evaluate four different simultaneous localization and mapping (SLAM) systems in the context of localization of multi-legged walking robots equipped with compact RGB-D sensors. This paper identifies problems related to in-motion data acquisition in a legged robot and evaluates the particular building blocks and concepts applied in contemporary SLAM systems against these problems. The SLAM systems are evaluated on two independent experimental set-ups, applying a well-established methodology and performance metrics. Design/methodology/approach Four feature-based SLAM architectures are evaluated with respect to their suitability for localization of multi-legged walking robots. The evaluation methodology is based on the computation of the absolute trajectory error (ATE) and relative pose error (RPE), which are performance metrics well-established in the robotics community. Four sequences of RGB-D frames acquired in two independent experiments using two different six-legged walking robots are used in the evaluation process. Findings The experiments revealed that the predominant problem characteristics of the legged robots as platforms for SLAM are the abrupt and unpredictable sensor motions, as well as oscillations and vibrations, which corrupt the images captured in-motion. The tested adaptive gait allowed the evaluated SLAM systems to reconstruct proper trajectories. The bundle adjustment-based SLAM systems produced best results, thanks to the use of a map, which enables to establish a large number of constraints for the estimated trajectory. Research limitations/implications The evaluation was performed using indoor mockups of terrain. Experiments in more natural and challenging environments are envisioned as part of future research. Practical implications The lack of accurate self-localization methods is considered as one of the most important limitations of walking robots. Thus, the evaluation of the state-of-the-art SLAM methods on legged platforms may be useful for all researchers working on walking robots’ autonomy and their use in various applications, such as search, security, agriculture and mining. Originality/value The main contribution lies in the integration of the state-of-the-art SLAM methods on walking robots and their thorough experimental evaluation using a well-established methodology. Moreover, a SLAM system designed especially for RGB-D sensors and real-world applications is presented in details.

Low-cost Indirect Measurement Methods for Self-x Integrated Sensory Electronics for Industry 4.0

2020 ◽  
Vol 87 (s1) ◽  
pp. s79-s84
Author(s):  
Qummar Zaman ◽  
Senan Alraho ◽  
Andreas König
Keyword(s):  
Industry 4.0 ◽  
Degrees Of Freedom ◽  
Performance Metrics ◽  
Low Cost ◽  
Indirect Measurement ◽  
Measurement Methods ◽  
Instrumentation Amplifier ◽  
Performance Parameters ◽  
Current Feedback ◽  
Indirect Measurements

AbstractThe conventional method for testing the performance of reconfigurable sensory electronics of industry 4.0 relies on the direct measurement methods. This approach gives higher accuracy but at the price of extremely high testing cost and does not utilize the new degrees of freedom for measurement methods enabled by industry 4.0. In order to reduce the test cost and use available resources more efficiently, a primary approach, called indirect measurements or alternative testing has been proposed using a non-intrusive sensor. Its basic principle consists in using the indirect measurements, in order to estimate the sensory electronics performance parameters without measuring directly. The non-intrusive property of the proposed method offers better performance of the sensing electronics and virtually applicable to any sensing electronics. Efficiency is evaluated in terms of model accuracy by using six different classical metrics. It uses an indirect current-feedback instrumentation amplifier (InAmp) as a test vehicle to evaluate the performance parameters of the circuit. The device is implemented using CMOS 0.35 μm technology. The achieved maximum value of average expected error metrics is 0.24, and the lowest value of correlation performance metrics is 0.91, which represent an excellent efficiency of InAmp performance predictor.

scholarly journals Interband Cascade Photonic Integrated Circuits on Native III-V Chip

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 599
Author(s):  
Jerry R. Meyer ◽  
Chul Soo Kim ◽  
Mijin Kim ◽  
Chadwick L. Canedy ◽  
Charles D. Merritt ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Detection System ◽  
Laser Cavity ◽  
Building Blocks ◽  
Drive Power ◽  
Optical Elements ◽  
Photonic Integrated Circuit ◽  
Cleaved Facets ◽  
On Chip

We describe how a midwave infrared photonic integrated circuit (PIC) that combines lasers, detectors, passive waveguides, and other optical elements may be constructed on the native GaSb substrate of an interband cascade laser (ICL) structure. The active and passive building blocks may be used, for example, to fabricate an on-chip chemical detection system with a passive sensing waveguide that evanescently couples to an ambient sample gas. A variety of highly compact architectures are described, some of which incorporate both the sensing waveguide and detector into a laser cavity defined by two high-reflectivity cleaved facets. We also describe an edge-emitting laser configuration that optimizes stability by minimizing parasitic feedback from external optical elements, and which can potentially operate with lower drive power than any mid-IR laser now available. While ICL-based PICs processed on GaSb serve to illustrate the various configurations, many of the proposed concepts apply equally to quantum-cascade-laser (QCL)-based PICs processed on InP, and PICs that integrate III-V lasers and detectors on silicon. With mature processing, it should become possible to mass-produce hundreds of individual PICs on the same chip which, when singulated, will realize chemical sensing by an extremely compact and inexpensive package.

Sign in / Sign up

Export Citation Format

Share Document