scholarly journals Efficiency Evaluation of the Ejector Cooling Cycle using a New Generation of HFO/HCFO Refrigerant as a R134a Replacement

Energies ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 2136 ◽  
Author(s):  
Bartosz Gil ◽  
Jacek Kasperski
Keyword(s):  
High Efficiency ◽  
Coefficient Of Performance ◽  
Condensation Temperature ◽  
Evaporation And Condensation ◽  
Wide Range ◽  
Theoretical Investigations ◽  
Maximum Coefficient ◽  
C 30 ◽  
New Generation ◽  
And Control

Theoretical investigations of the ejector refrigeration system using hydrofluoroolefins (HFOs) and hydrochlorofluoroolefin (HCFO) refrigerants are presented and discussed. A comparative study for eight olefins and R134a as the reference fluid was made on the basis of a one-dimensional model. To facilitate and extend the possibility of comparing our results, three different levels of evaporation and condensation temperature were adopted. The generator temperature for each refrigerant was changed in the range from 60 °C to the critical temperature for a given substance. The performed analysis shown that hydrofluoroolefins obtain a high efficiency of the ejector system at low primary vapor temperatures. For the three analyzed sets of evaporation and condensation temperatures (te and tc equal to 0 °C/25 °C, 6 °C/30 °C, and 9 °C/40 °C) the maximum Coefficient of Performance (COP) was 0.35, 0.365, and 0.22, respectively. The best performance was received for HFO-1243zf and HFO-1234ze(E). However, they do not allow operation in a wide range of generator temperatures, and, therefore, it is necessary to correctly select and control the operating parameters of the ejector.

Smart Temperature Sensors

2019 ◽  
pp. 223-250
Author(s):  
Ashraf A. Zaher
Keyword(s):  
Weather Forecast ◽  
Temperature Sensors ◽  
Consumer Electronics ◽  
Data Logging ◽  
Industrial Processing ◽  
Wide Range ◽  
Scada Systems ◽  
New Generation ◽  
And Control ◽  
Measurement And Control

Many real-world applications depend on temperature sensing and/or control. This includes a wide range of industrial processes, chemical reactors, and SCADA systems, in addition to other physical, mechanical, and biological systems. With the advancement of technology, it became possible to produce a new generation of smart and compact temperature sensors, which are capable of providing digital outputs that are more accurate, robust, and easily interfaced and integrated into measurement and control systems. This chapter first surveys traditional analog temperature sensors, such as RTDs and thermocouples, to provide a strong motivation for the need to adopt better and smarter techniques that mainly rely on digital technology (e.g., CMOS designs). Different interfacing techniques that do not need ADCs are introduced, including the programmable Arduino microcontrollers. Different applications will be explored that include automotive accessories, weather forecast, healthcare, industrial processing, firefighting, and consumer electronics. Both wired and wireless technologies, including the IoT, will be investigated as means for transmitting the sensed data for further processing and data logging. A special case study to provide information redundancy in industrial SCADA systems will be analyzed to illustrate the advantages and limitations of smart temperature sensors. The chapter concludes with a summary of the design effort, accuracy, performance, and cost effectiveness of smart temperature sensors while highlighting future trends in this field for different applications.

scholarly journals COP enhancement of vapour compression refrigeration system using dedicated mechanical subcooling cycle

2020 ◽  
Vol 39 (3) ◽  
pp. 776-784
Author(s):  
T.S. Mogaji ◽  
A. Awolala ◽  
O.Z. Ayodeji ◽  
P.B. Mogaji ◽  
D.E. Philip
Keyword(s):  
System Performance ◽  
Cooling Capacity ◽  
Coefficient Of Performance ◽  
Condensation Temperature ◽  
Refrigeration System ◽  
Wide Range ◽  
Cascade Refrigeration System ◽  
Cascade Refrigeration ◽  
Vapour Compression ◽  
Better Than

This study focused on development of an improved vapour compression refrigeration system (IVCR system). Dedicated mechanical subcooling cycle is employed in attaining the developed IVCR system. The system is composed of two cycles cascade refrigeration system working with R134a. It consists of a rectangular shape with total storage space of 0.582 m3, made of galvanized mild steel and internally insulated with 0.05 m polystyrene foam. Tests under a wide range operating temperature conditions were carried out on the developed IVCR system. Performance evaluation of the system was characterized in terms of cooling capacity and coefficient of performance (COP). Experimental results showed that the COP of the subcooled system improved better than that of the main system from 18.0% to about 33.5% over an evaporating temperature range of -10 to 30oC. It can be concluded that the use of dedicated sub cooling cycle in VCR system is more efficient and suitable for the betterment of thermal system performance. Keywords: Vapour compression Refrigeration system, Coefficient of performance, dedicated subcooled system, Condensation temperature, Evaporation temperature.

A new generation of wide-range multifunctional optoelectronic devices for the measurement and control of linear dimensions and displacements

1993 ◽  
Vol 36 (8) ◽  
pp. 875-878
Author(s):  
V. N. Efimov ◽  
G. B. Kainer ◽  
I. B. Karpovich ◽  
V. V. Moskalev ◽  
V. N. Petrichenko ◽  
...  
Keyword(s):  
Optoelectronic Devices ◽  
Linear Dimensions ◽  
Wide Range ◽  
New Generation ◽  
And Control ◽  
Measurement And Control

scholarly journals Design and Transient Analysis of a Natural Gas-Assisted Solar LCPV/T Trigeneration System

Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5930
Author(s):  
Yang Liu ◽  
Han Yue ◽  
Na Wang ◽  
Heng Zhang ◽  
Haiping Chen
Keyword(s):  
Natural Gas ◽  
Heat Pump ◽  
High Efficiency ◽  
Coefficient Of Performance ◽  
Cooling Mode ◽  
Energy Supply System ◽  
Simulation Performance ◽  
Temperature Heat ◽  
Maximum Coefficient ◽  
Transient System

This paper proposes a natural gas assisted solar low-concentrating photovoltaic/thermal trigeneration (NG-LCPV/T-TG) system. This novel system simultaneously provides electrical, thermal and cooling energy to the user. The design and dynamic simulation performance of the NG-LCPV/T-TG system is completed using Transient System Simulation (TRNSYS) software. The results show that the system can satisfy the requirements of the cooling and heating load. The proposed system maintains the experimental room temperature at about 25 °C under the cooling mode, at about 20 °C under the heating mode. The electrical and thermal energy produced by the low-concentrating photovoltaic/thermal (LCPV/T) system are 3819 kWh and 18,374 kWh. Meanwhile, the maximum coefficient of performance (COP) of the low temperature heat pump (LHP), high temperature heat pump (HHP) and chiller are 5, 2.2 and 0.6, respectively. This proposed system realizes the coupling of natural gas and solar energy in a building. In summary, this trigeneration system is feasible and it promotes the implementation of building integrated high-efficiency energy supply system.

scholarly journals Induction Heating in Domestic Cooking and Industrial Melting Applications: A Systematic Review on Modelling, Converter Topologies and Control Schemes

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6634
Author(s):  
Pradeep Vishnuram ◽  
Gunabalan Ramachandiran ◽  
Thanikanti Sudhakar Babu ◽  
Benedetto Nastasi
Keyword(s):  
Induction Heating ◽  
High Efficiency ◽  
Electronic Device ◽  
Frequency Control ◽  
Switching Frequency ◽  
Density Control ◽  
Wide Range ◽  
Control Schemes ◽  
Converter Topologies ◽  
And Control

In the current scenario, power electronic device-based induction heating (IH) technologies are widely employed in domestic cooking, industrial melting and medical applications. These IH applications are designed using different converter topologies, modulation and control techniques. This review article mainly focuses on the modelling of half-bridge series resonant inverter, electrical and thermal model of IH load. This review also analyses the performance of the converter topologies based on the power conversion stages, switching frequency, power rating, power density, control range, modulation techniques, load handling capacity and efficiency. Moreover, this paper provides insight into the future of IH application, with respect to the adaptation of wide band-gap power semiconductor materials, multi-output topologies, variable-frequency control schemes with minimum losses and filters designed to improve source-side power factor. With the identified research gap in the literature, an attempt has also been made to develop a new hybrid modulation technique, to achieve a wide range of power control with high efficiency. A 100 W full-bridge inverter prototype is realised both in simulation and hardware, with various modulation schemes using a PIC16F877A microcontroller. The results are compared with existing techniques and the comparisons reveal that the proposed scheme is highly viable and effective for the rendered applications.

scholarly journals Increase the Efficiency of an Induction Motor Feed from Inverter for Low Frequencies by Combining Design and Control Improvements

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 530
Author(s):  
Maria Dems ◽  
Krzysztof Komeza ◽  
Jacek Szulakowski ◽  
Witold Kubiak
Keyword(s):  
Energy Savings ◽  
High Efficiency ◽  
Open Loop ◽  
Design Parameters ◽  
Optimal Size ◽  
Low Frequencies ◽  
Field Weakening ◽  
Speed Regulation ◽  
Wide Range ◽  
And Control

Speed-controlled induction motors have the most significant potential for energy savings. The greatest problems with obtaining high efficiency occur in motors with a wide range of rotational speed regulation, as in the motors for driving industrial washing machines under consideration. While for the highest speeds, the dominant phenomenon is at field weakening. The problem is obtaining the optimal size of the magnetic flux for low rotation speed to prevent excessive saturation increasing current, and reduction of efficiency. This problem is usually solved by selecting the appropriate control for an already built machine. The authors propose a combination of activities when designing the motor structure with the selection of proper control, which allows for high efficiency. Since the drive does not require precise speed control or obtaining the required dynamics, it was possible to use an inexpensive control in an open loop, avoiding the cost of transmitters. Furthermore, the number of design parameters that are subject to change is significantly limited by technological factors and the available space in the washing machine. Proper parameter selection was made using a peripheral method assisted by field-circuit simulations. The proposed approach can be used in designing structures and selecting motors controls for other applications.

Synthesis of Elaborate Benzofuran-2-Carboxamide Derivatives Through a Combination of 8-Aminoquinoline Directed C–H Arylations and Transamidations

2019 ◽  
Author(s):  
Michael Oschmann ◽  
Linus Johansson Holm ◽  
Oscar Verho
Keyword(s):  
Small Molecule ◽  
High Efficiency ◽  
Synthetic Strategy ◽  
Small Molecule Screening ◽  
Physiological Properties ◽  
Wide Range ◽  
Directing Group ◽  
Synthetic Sequence

Benzofurans are everywhere in nature and they have been extensively studied by medicinal chemists over the years because of their chemotherapeutic and physiological properties. Herein, we describe a strategy that can be used to access elaborate benzo-2-carboxamide derivatives, which involves a synthetic sequence of 8-aminoquinoline directed C–H arylations followed by transamidations. For the directed C–H arylations, Pd catalysis was used to install a wide range of aryl and heteroaryl substituents at the C3 position of the benzofuran scaffold in high efficiency. Directing group cleavage and further diversification of the C3-arylated benzofuran products were then achieved in a single synthetic operation through the utilization of a two-step transamidation protocol. By bocylating the 8-aminoquinoline amide moiety of these products, it proved possible to activate them towards aminolysis with different amine nucleophiles. Interestingly, this aminolysis reaction was found to proceed efficiently without the need of any additional catalyst or additive. Given the high efficiency and modularity of this synthetic strategy, it constitute a very attractive approach for generating structurally-diverse collections of benzofuran derivatives for small molecule screening.

THE SOME QUESTIONS OF AUTONOMOUS MOTION AND MANAGEMENT OF LAND-MOBILE ROBOTIC COMPLEXES FOR UKRAINIAN GROUND FORCESE

2019 ◽  
pp. 53-58
Author(s):  
О. Кravchuk ◽  
V. Symonenkov ◽  
I. Symonenkova ◽  
O. Hryhorev
Keyword(s):  
Large Scale ◽  
Armed Forces ◽  
Distributed Information ◽  
Wide Range ◽  
Highly Effective ◽  
Information Management Systems ◽  
Robotic Devices ◽  
Principles And Standards ◽  
And Control ◽  
The Eu

Today, more than forty countries of the world are engaged in the development of military-purpose robots. A number of unique mobile robots with a wide range of capabilities are already being used by combat and intelligence units of the Armed forces of the developed world countries to conduct battlefield intelligence and support tactical groups. At present, the issue of using the latest information technology in the field of military robotics is thoroughly investigated, and the creation of highly effective information management systems in the land-mobile robotic complexes has acquired a new phase associated with the use of distributed information and sensory systems and consists in the transition from application of separate sensors and devices to the construction of modular information subsystems, which provide the availability of various data sources and complex methods of information processing. The purpose of the article is to investigate the ways to increase the autonomy of the land-mobile robotic complexes using in a non-deterministic conditions of modern combat. Relevance of researches is connected with the necessity of creation of highly effective information and control systems in the perspective robotic means for the needs of Land Forces of Ukraine. The development of the Armed Forces of Ukraine management system based on the criteria adopted by the EU and NATO member states is one of the main directions of increasing the effectiveness of the use of forces (forces), which involves achieving the principles and standards necessary for Ukraine to become a member of the EU and NATO. The inherent features of achieving these criteria will be the transition to a reduction of tasks of the combined-arms units and the large-scale use of high-precision weapons and land remote-controlled robotic devices. According to the views of the leading specialists in the field of robotics, the automation of information subsystems and components of the land-mobile robotic complexes can increase safety, reliability, error-tolerance and the effectiveness of the use of robotic means by standardizing the necessary actions with minimal human intervention, that is, a significant increase in the autonomy of the land-mobile robotic complexes for the needs of Land Forces of Ukraine.

To the 70th anniversary of World Meteorological Organization. Scientific and technical cooperation of Hydrometeorological Center of the USSR/Russia in the Programs of World Meteorological Organization

2020 ◽  
pp. 117-138
Author(s):  
S.V. Borshch ◽  
◽  
R.M. Vil’fand ◽  
D.B. Kiktev ◽  
V.M. Khan ◽  
...  
Keyword(s):  
Environmental Monitoring ◽  
High Efficiency ◽  
World Meteorological Organization ◽  
70Th Anniversary ◽  
Technical Level ◽  
Technical Cooperation ◽  
Wide Range

The paper presents the summary and results of long-term and multi-faceted experience of international scientific and technical cooperation of Hydrometeorological Center of Russia in the field of hydrometeorology and environmental monitoring within the framework of WMO programs, which indicates its high efficiency in performing a wide range of works at a high scientific and technical level. Keywords: World Meteorological Organization, major WMO programs, representatives of Hydrometeorological Center of Russia in WMO

Integrated Design and Multi-Objective Optimization of a Single Stage Heat-Pump Turbocompressor

2013 ◽  
Author(s):  
J. Schiffmann
Keyword(s):  
Design Optimization ◽  
High Efficiency ◽  
Integrated Design ◽  
Heat Pumps ◽  
Small Scale ◽  
Multi Objective Optimization ◽  
Design Constraints ◽  
Multi Objective ◽  
Wide Range ◽  
Standard Design

Small scale turbomachines in domestic heat pumps reach high efficiency and provide oil-free solutions which improve heat-exchanger performance and offer major advantages in the design of advanced thermodynamic cycles. An appropriate turbocompressor for domestic air based heat pumps requires the ability to operate on a wide range of inlet pressure, pressure ratios and mass flows, confronting the designer with the necessity to compromise between range and efficiency. Further the design of small-scale direct driven turbomachines is a complex and interdisciplinary task. Textbook design procedures propose to split such systems into subcomponents and to design and optimize each element individually. This common procedure, however, tends to neglect the interactions between the different components leading to suboptimal solutions. The authors propose an approach based on the integrated philosophy for designing and optimizing gas bearing supported, direct driven turbocompressors for applications with challenging requirements with regards to operation range and efficiency. Using previously validated reduced order models for the different components an integrated model of the compressor is implemented and the optimum system found via multi-objective optimization. It is shown that compared to standard design procedure the integrated approach yields an increase of the seasonal compressor efficiency of more than 12 points. Further a design optimization based sensitivity analysis allows to investigate the influence of design constraints determined prior to optimization such as impeller surface roughness, rotor material and impeller force. A relaxation of these constrains yields additional room for improvement. Reduced impeller force improves efficiency due to a smaller thrust bearing mainly, whereas a lighter rotor material improves rotordynamic performance. A hydraulically smoother impeller surface improves the overall efficiency considerably by reducing aerodynamic losses. A combination of the relaxation of the 3 design constraints yields an additional improvement of 6 points compared to the original optimization process. The integrated design and optimization procedure implemented in the case of a complex design problem thus clearly shows its advantages compared to traditional design methods by allowing a truly exhaustive search for optimum solutions throughout the complete design space. It can be used for both design optimization and for design analysis.

Sign in / Sign up

Export Citation Format

Share Document