scholarly journals A Multi-Point Meso–Micro Downscaling Method Including Atmospheric Stratification

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1191
Author(s):  
Renko Buhr ◽  
Hassan Kassem ◽  
Gerald Steinfeld ◽  
Michael Alletto ◽  
Björn Witha ◽  
...  
Keyword(s):  
Wind Energy ◽  
Single Point ◽  
Scale Model ◽  
Cfd Modeling ◽  
Modeling Framework ◽  
Site Assessment ◽  
Micro Scale ◽  
Scale Models ◽  
Wind Climate ◽  
Meso Scale

In wind energy site assessment, one major challenge is to represent both the local characteristics as well as general representation of the wind climate on site. Micro-scale models (e.g., Reynolds-Averaged-Navier-Stokes (RANS)) excel in the former, while meso-scale models (e.g., Weather Research and Forecasting (WRF)) in the latter. This paper presents a fast approach for meso–micro downscaling to an industry-applicable computational fluid dynamics (CFD) modeling framework. The model independent postprocessing tool chain is applied using the New European Wind Atlas (NEWA) on the meso-scale and THETA on the micro-scale side. We adapt on a previously developed methodology and extend it using a micro-scale model including stratification. We compare a single- and multi-point downscaling in critical flow situations and proof the concept on long-term mast data at Rödeser Berg in central Germany. In the longterm analysis, in respect to the pure meso-scale results, the statistical bias can be reduced up to 45% with a single-point downscaling and up to 107% (overcorrection of 7%) with a multi-point downscaling. We conclude that single-point downscaling is vital to combine meso-scale wind climate and micro-scale accuracy. The multi-point downscaling is further capable to include wind shear or veer from the meso-scale model into the downscaled velocity field. This adds both, accuracy and robustness, by minimal computational cost. The new introduction of stratification in the micro-scale model provides a marginal difference for the selected stability conditions, but gives a prospect on handling stratification in wind energy site assessment for future applications.

A novel synergistic multi-scale modeling framework to predict micro- and meso-scale damage behaviors of 2D triaxially braided composite

2021 ◽  
pp. 105678952110339
Author(s):  
Hongyong Jiang ◽  
Yiru Ren ◽  
Qiduo Jin
Keyword(s):  
Compressive Load ◽  
Scale Model ◽  
Modeling Framework ◽  
Braided Composite ◽  
Multi Scale ◽  
Scale Modeling ◽  
Bridge Model ◽  
Multi Scale Modeling ◽  
Transverse Damage ◽  
Meso Scale

A novel synergistic multi-scale modeling framework with a coupling of micro- and meso-scale is proposed to predict damage behaviors of 2D-triaxially braided composite (2DTBC). Based on the Bridge model, the internal stress and micro damage of constituent materials are respectively coupled with the stress and damage of tow. The initial effective elastic properties of tow (IEEP) used as the predefined data are estimated by micro-mechanics models. Due to in-situ effects, stress concentration factor (SCF) is considered in the micro matrix, exhibiting progressive damage accumulation. Comparisons of IEEP and strengths between the Bridge and Chamis’ theory are conducted to validate the values of IEEP and SCF. Based on the representative volume element (RVE), the macro properties and damage modes of 2DTBC are predicted to be consistent with available experiments and meso-scale simulation. Both axial and transverse damage mechanisms of 2DTBC under tensile or compressive load are revealed. Micro fiber and matrix damage accumulations have significant effects on the meso-scale axial and transverse damage of tows due to multi-scale coupling effects. Different from existing meso-/multi-scale models, the proposed multi-scale model can capture a crucial phenomenon that the transverse damage of tow is vulnerable to micro fiber fracture. The proposed multi-scale framework provides a robust tool for future systematic studies on constituent materials level to larger-scale aeronautical materials.

scholarly journals Multi-scale atmospheric environment modelling for urban areas

2009 ◽  
Vol 3 (1) ◽  
pp. 53-57 ◽  
Author(s):  
A. A. Baklanov ◽  
R. B. Nuterman
Keyword(s):  
Urban Areas ◽  
Scale Effects ◽  
Urban Setting ◽  
Atmospheric Environment ◽  
Scale Model ◽  
Limited Area ◽  
Nested Models ◽  
Micro Scale ◽  
Multi Scale ◽  
Meso Scale

Abstract. Modern supercomputers allow realising multi-scale systems for assessment and forecasting of urban meteorology, air pollution and emergency preparedness and considering nesting with obstacle-resolved models. A multi-scale modelling system with downscaling from regional to city-scale with the Environment – HIgh Resolution Limited Area Model (Enviro-HIRLAM) and to micro-scale with the obstacle-resolved Micro-scale Model for Urban Environment (M2UE) is suggested and demonstrated. The M2UE validation results versus the Mock Urban Setting Trial (MUST) experiment indicate satisfactory quality of the model. Necessary conditions for the choice of nested models, building descriptions, areas and resolutions of nested models are analysed. Two-way nesting (up- and down-scaling), when scale effects both directions (from the meso-scale on the micro-scale and from the micro-scale on the meso-scale), is also discussed.

scholarly journals An Approach for Material Model Identification of a Composite Coating Using Micro-Indentation and Multi-Scale Simulations

Coatings ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 92
Author(s):  
Pouya Shojaei ◽  
Riccardo Scazzosi ◽  
Mohamed Trabia ◽  
Brendan O’Toole ◽  
Marco Giglio ◽  
...  
Keyword(s):  
Finite Element ◽  
Model Comparison ◽  
Plastic Material ◽  
Composite Coatings ◽  
Material Model ◽  
Scale Model ◽  
Indentation Testing ◽  
Micro Scale ◽  
Micro Indentation ◽  
Meso Scale

While deposited thin film coatings can help enhance surface characteristics such as hardness and friction, their effective incorporation in product design is restricted by the limited understanding of their mechanical behavior. To address this, an approach combining micro-indentation and meso/micro-scale simulations was proposed. In this approach, micro-indentation testing was conducted on both the coating and the substrate. A meso-scale uniaxial compression finite element model was developed to obtain a material model of the coating. This material model was incorporated within an axisymmetric micro-scale model of the coating to simulate the indentation. The proposed approach was applied to a Ti/SiC metal matrix nanocomposite (MMNC) coating, with a 5% weight of SiC nanoparticles deposited over a Ti-6Al-4V substrate using selective laser melting (SLM). Micro-indentation testing was conducted on both the Ti/SiC MMNC coating and the Ti-6Al-4V substrate. The results of the meso-scale finite element indicated that the MMNC coating can be represented using a bi-linear elastic-plastic material model, which was incorporated within an axisymmetric micro-scale model. Comparison of the experimental and micro-scale model results indicated that the proposed approach was effective in capturing the post-indentation behavior of the Ti/SiC MMNC coating. This methodology can also be used for studying the response of composite coatings with different percentages of reinforcements.

Numerical Interlaminar Shear Damage Analysis of Fiber Reinforced Composites Improved by ZnO Nanowires

2020 ◽  
Author(s):  
Parisa Marashizadeh ◽  
Mohammad Abshirini ◽  
Mrinal Saha ◽  
Yingtao Liu
Keyword(s):  
Hybrid Composite ◽  
Zno Nanowires ◽  
Hybrid Structures ◽  
Scale Model ◽  
Damage Analysis ◽  
Fiber Reinforced ◽  
Micro Scale ◽  
Vertically Aligned ◽  
Interlaminar Shear ◽  
Meso Scale

Abstract In this study, the damage analysis of hybrid carbon fiber reinforced polymer (CFRP) composited with vertically aligned zinc oxide (ZnO) nanowires is investigated numerically. The effect of growing nanowires on improving the interlaminar shear strength (ILSS) of the hybrid structures is explored. The multi-scale model developed to make a bridge between the materials with different length scales available in the hybrid structures, including micro-scale, meso-scale, and macros-scale. The vertically aligned ZnO nanowires on the lamina and embedded in the epoxy matrix creates an enhancement layer. The effective material properties of this layer are evaluated at micro-scale by homogenization analysis. The cohesive zone method is employed in the meso-scale to explore the interfacial behavior and delamination (interlaminar damage) between the homogenized stacking layer and the CFRP lamina. Besides, the strain-based failure criterion is implemented at the macro-scale to investigate the progressive damage of fiber and matrix in CFRP plies. This analysis is programmed in user-defined subroutine linked to ABAQUS finite element software. The three-dimensional hybrid composite short beam in the three-point bending load is simulated in ABAQUS Explicit packager, and the ILSS is obtained. The damage behavior of hybrid composite is compared to the bare CFRP beam. The results indicate that aligning nanowires on the plies improves the performance of CFRP composites.

scholarly journals The Winter Habitat Selection of Red Deer (Cervus elaphus) Based on a Multi-Scale Model

Animals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2454
Author(s):  
Yue Sun ◽  
Yanze Yu ◽  
Jinhao Guo ◽  
Minghai Zhang
Keyword(s):  
Habitat Selection ◽  
Environmental Factors ◽  
Cervus Elaphus ◽  
Red Deer ◽  
Scale Model ◽  
Winter Habitat ◽  
Multi Scale ◽  
Optimal Scale ◽  
Scale Models ◽  
Selection Of

Single-scale frameworks are often used to analyze the habitat selections of species. Research on habitat selection can be significantly improved using multi-scale models that enable greater in-depth analyses of the scale dependence between species and specific environmental factors. In this study, the winter habitat selection of red deer in the Gogostaihanwula Nature Reserve, Inner Mongolia, was studied using a multi-scale model. Each selected covariate was included in multi-scale models at their “characteristic scale”, and we used an all subsets approach and model selection framework to assess habitat selection. The results showed that: (1) Univariate logistic regression analysis showed that the response scale of red deer to environmental factors was different among different covariate. The optimal scale of the single covariate was 800–3200 m, slope (SLP), altitude (ELE), and ratio of deciduous broad-leaved forests were 800 m in large scale, except that the farmland ratio was 200 m in fine scale. The optimal scale of road density and grassland ratio is both 1600 m, and the optimal scale of net forest production capacity is 3200 m; (2) distance to forest edges, distance to cement roads, distance to villages, altitude, distance to all road, and slope of the region were the most important factors affecting winter habitat selection. The outcomes of this study indicate that future studies on the effectiveness of habitat selections will benefit from multi-scale models. In addition to increasing interpretive and predictive capabilities, multi-scale habitat selection models enhance our understanding of how species respond to their environments and contribute to the formulation of effective conservation and management strategies for ungulata.

scholarly journals Genome-Scale Metabolic Network Analysis of the Opportunistic Pathogen Pseudomonas aeruginosa PAO1

2008 ◽  
Vol 190 (8) ◽  
pp. 2790-2803 ◽  
Author(s):  
Matthew A. Oberhardt ◽  
Jacek Puchałka ◽  
Kimberly E. Fryer ◽  
Vítor A. P. Martins dos Santos ◽  
Jason A. Papin
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Metabolic Network ◽  
Opportunistic Pathogen ◽  
Scale Model ◽  
Modeling Framework ◽  
Major Life ◽  
Metabolic Versatility ◽  
A Genome ◽  
Scale Properties ◽  
Genome Scale

ABSTRACT Pseudomonas aeruginosa is a major life-threatening opportunistic pathogen that commonly infects immunocompromised patients. This bacterium owes its success as a pathogen largely to its metabolic versatility and flexibility. A thorough understanding of P. aeruginosa's metabolism is thus pivotal for the design of effective intervention strategies. Here we aim to provide, through systems analysis, a basis for the characterization of the genome-scale properties of this pathogen's versatile metabolic network. To this end, we reconstructed a genome-scale metabolic network of Pseudomonas aeruginosa PAO1. This reconstruction accounts for 1,056 genes (19% of the genome), 1,030 proteins, and 883 reactions. Flux balance analysis was used to identify key features of P. aeruginosa metabolism, such as growth yield, under defined conditions and with defined knowledge gaps within the network. BIOLOG substrate oxidation data were used in model expansion, and a genome-scale transposon knockout set was compared against in silico knockout predictions to validate the model. Ultimately, this genome-scale model provides a basic modeling framework with which to explore the metabolism of P. aeruginosa in the context of its environmental and genetic constraints, thereby contributing to a more thorough understanding of the genotype-phenotype relationships in this resourceful and dangerous pathogen.

MICRO AND MESO SCALES OF DESCRIPTION CORRESPONDING TO A MODEL OF TISSUE INVASION BY SOLID TUMOURS

2005 ◽  
Vol 15 (11) ◽  
pp. 1667-1683 ◽  
Author(s):  
MIROSŁAW LACHOWICZ
Keyword(s):  
Mathematical Models ◽  
Type Equation ◽  
Reaction Diffusion ◽  
Solid Tumours ◽  
Macroscopic Model ◽  
Scale Level ◽  
Micro Scale ◽  
Tissue Invasion ◽  
Mathematical Relationships ◽  
Meso Scale

In this paper two new mathematical models are proposed that correspond to a macroscopic model of tissue invasion of solid tumours, in terms of a system of reaction-diffusion-chemotaxis equations. The first model is defined at the micro-scale level of a large number of interacting individual entities, and is in terms of a linear (Markov) equation. The second model refers to the meso-scale level of description of test-entities and is given in terms of a bilinear Boltzmann-type equation. Mathematical relationships among these three possible descriptions are formulated. Explicit error estimates are given.

scholarly journals A Comparative Evaluation of a Mesoscale Model and Atmospheric Global Circulation Model for Air Quality Simulation: A Multiscale, Multisite Evaluation

2012 ◽  
Vol 2012 ◽  
pp. 1-15 ◽  
Author(s):  
P. Goswami ◽  
J. Baruah
Keyword(s):  
High Resolution ◽  
Mesoscale Model ◽  
Large City ◽  
Circulation Model ◽  
Urban Pollution ◽  
Atmospheric Pollutants ◽  
Scale Model ◽  
Global Circulation Model ◽  
Global Circulation ◽  
Meso Scale

Concentrations of atmospheric pollutants are strongly influenced by meteorological parameters like rainfall, relative humidity and wind advection. Thus accurate specifications of the meteorological fields, and their effects on pollutants, are critical requirements for successful modelling of air pollution. In terms of their applications, pollutant concentration models can be used in different ways; in one, short term high resolution forecasts are generated to predict and manage urban pollution. Another application of dynamical pollution models is to generate outlook for a given airbasin, such as over a large city. An important question is application-specific model configuration for the meteorological simulations. While a meso-scale model provides a high-resolution configuration, a global model allows better simulation of large-sale fields through its global environment. Our objective is to comparatively evaluate a meso-scale atmospheric model (MM5) and atmospheric global circulation model (AGCM) in simulating different species of pollutants over different airbasins. In this study we consider four locations: ITO (Central Delhi), Sirifort (South Delhi), Bandra (Mumbai) and Karve Road (Pune). The results show that both the model configurations provide comparable skills in simulation of monthly and annual loads, although the skill of the meso-scale model is somewhat higher, especially at shorter time scales.

scholarly journals Site assessment, turbine selection, and local feed-in tariffs through the wind energy index

2017 ◽  
Vol 185 ◽  
pp. 1087-1099 ◽  
Author(s):  
Matthias Ritter ◽  
Lars Deckert
Keyword(s):  
Wind Energy ◽  
Energy Index ◽  
Site Assessment

Validating Numerical CFD Simulations With Experimental Data for Turbulence Phenomena in Axial Flow Gas Turbine Diffusers

2009 ◽  
Author(s):  
Farrokh Zarifi-Rad ◽  
Hamid Vajihollahi ◽  
James O’Brien
Keyword(s):  
Experimental Data ◽  
Gas Turbine ◽  
Turbine Blades ◽  
Axial Flow ◽  
Experimental Results ◽  
Scale Model ◽  
Data Set ◽  
Pressure Profiles ◽  
Scale Models ◽  
Inlet Conditions

Scale models give engineers an excellent understanding of the aerodynamic behavior behind their design; nevertheless, scale models are time consuming and expensive. Therefore computer simulations such as Computational Fluid Dynamics (CFD) are an excellent alternative to scale models. One must ask the question, how close are the CFD results to the actual fluid behavior of the scale model? In order to answer this question the engineering team investigated the performance of a large industrial Gas Turbine (GT) exhaust diffuser scale model with performance predicted by commercially available CFD software. The experimental results were obtained from a 1:12 scale model of a GT exhaust diffuser with a fixed row of blades to simulate the swirl generated by the last row of turbine blades five blade configurations. This work is to validate the effect of the turbulent inlet conditions on an axial diffuser, both on the experimental front and on the numerical analysis approach. The object of this work is to bring forward a better understanding of velocity and static pressure profiles along the gas turbine diffusers and to provide an accurate experimental data set to validate the CFD prediction. For the CFD aspect, ANSYS CFX software was chosen as the solver. Two different types of mesh (hexagonal and tetrahedral) will be compared to the experimental results. It is understood that hexagonal (HEX) meshes are more time consuming and more computationally demanding, they are less prone to mesh sensitivity and have the tendancy to converge at a faster rate than the tetrahedral (TET) mesh. It was found that the HEX mesh was able to generate more consistent results and had less error than TET mesh.

Sign in / Sign up

Export Citation Format

Share Document