scholarly journals Characterization of Archaeological European White Elm (Ulmus laevis P.) and Black Poplar (Populus nigra L.)

Forests ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1329
Author(s):  
Amir Ghavidel ◽  
Reza Hosseinpourpia ◽  
Holger Militz ◽  
Viorica Vasilache ◽  
Ion Sandu
Keyword(s):  
Photoelectron Spectroscopy ◽  
Amorphous Structure ◽  
Sorption Behavior ◽  
Vapor Sorption ◽  
X Ray Diffraction ◽  
Dynamic Vapor Sorption ◽  
X Ray ◽  
Archaeological Wood ◽  
Extensive Degradation

The present study aims at characterization of freshly-cut and archaeological European white elm and poplar. The archaeological elm sample was buried at a depth of 8–10 m inside of soil with age approximation of ~1800–2000 years old, and the archaeological poplar sample was a part of a boat in a freshwater lake or river with age estimation of ~1000–1200 years. Alteration in the chemical structure of the elm and poplar samples due to the ageing process were confirmed by X-ray photoelectron spectroscopy (XPS). Both archaeological wood (AW) samples illustrated considerably lower cellulose crystallinity than the fresh samples as determined by X-ray diffraction. The sorption behavior of AW and fresh wood (FW) samples were evaluated by means of dynamic vapor sorption (DVS) analysis. Results exhibited a higher equilibrium moisture content (EMC) and sorption hysteresis values in archaeological elm and poplar as compared with the fresh samples. Higher hydrophilicity of the AW samples than the FW ones is attributed to their higher amorphous structure. The extensive degradation of AW samples were also confirmed by scanning electron microscopy (SEM) micrographs.

Chemical and physical characterization of C(N)-doped W–S sputtered films

2004 ◽  
Vol 19 (8) ◽  
pp. 2356-2365 ◽  
Author(s):  
A. Nossa ◽  
A. Cavaleiro
Keyword(s):  
Photoelectron Spectroscopy ◽  
Amorphous Structure ◽  
X Ray Diffraction ◽  
Load Bearing Capacity ◽  
X Ray ◽  
Sputtered Films ◽  
Different Types ◽  
N Compounds ◽  
Good Agreement

The load-bearing capacity of self-lubricating W–S films can be improved by doping with nitrogen or carbon. In this study, the chemical composition, the atomic bonding, the structure, and the surface and cross section morphologies of sputtered W–S–C(N) films were analyzed. The addition of the doping element leads to a progressive broadening of the x-ray diffraction (XRD) peaks indicating a loss of crystallinity. In W–S–N films, amorphous structure could be obtained. In W–S–C films, W–C compounds were detected in conjunction with the hexagonal WS2 phase. For the highest C contents, a nanocomposite structure, including those phases and graphite, was suggested for the film. X-ray photoelectron spectroscopy results showed different types of bonds in the W4f peak in good agreement with the XRD results, i.e., when W–C(N) compounds were indexed W–S, W–C, and W–N bonds are present in the W4f peak. For the highest C content film, the detection of C–C bond in the C1s peak confirmed the formation of graphite.

scholarly journals Fabrication and Characterization of Al/NiO Energetic Nanomultilayers

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
YiChao Yan ◽  
Wei Shi ◽  
HongChuan Jiang ◽  
Jie Xiong ◽  
WanLi Zhang ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Total Thickness ◽  
X Ray Diffraction ◽  
Dc Magnetron Sputtering ◽  
Metallic Oxide ◽  
Promising Candidate ◽  
X Ray ◽  
Thermal Boundary Conductance ◽  
Fabrication And Characterization

The redox reaction between Al and metallic oxide has its advantage compared with intermetallic reaction and Al/NiO nanomutlilayers are a promising candidate for enhancing the performance of energetic igniter. Al/NiO nanomutlilayers with different modulation periods are prepared on alumina substrate by direct current (DC) magnetron sputtering. The thicknesses of each period are 250 nm, 500 nm, 750 nm, 1000 nm, and 1500 nm, respectively, and the total thickness is 3 μm. The X-ray diffraction (XRD) and scanning electron microscope (SEM) results of the as-deposited Al/NiO nanomutlilayers show that the NiO films are amorphous and the layered structures are clearly distinguished. The X-ray photoelectron spectroscopy (XPS) demonstrates that the thickness of Al2O3increases on the side of Al monolayer after annealing at 450°C. The thermal diffusion time becomes greater significantly as the amount of thermal boundary conductance across the interfaces increases with relatively smaller modulation period. Differential scanning calorimeter (DSC) curve suggests that the energy release per unit mass is below the theoretical heat of the reaction due to the nonstoichiometric ratio between Al and NiO and the presence of impurities.

Preparation and Characterization of γ-Fe2O3-ZnFe2O4 Composite Nanoparticles

2013 ◽  
Vol 873 ◽  
pp. 152-157
Author(s):  
Long Long Chen ◽  
Jun Ming Li ◽  
Xiao Min Gong ◽  
Jian Li
Keyword(s):  
Photoelectron Spectroscopy ◽  
Chemical Species ◽  
Composite Nanoparticles ◽  
X Ray Diffraction ◽  
Ferrite Core ◽  
Phase Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Chemically Induced

Using a chemically induced transition in an FeCl2 solution, γ-Fe2O3 nanoparticles can be prepared from an amorphous precursor composed of FeOOH and Mg (OH)2. Surface modification by adding ZnCl2 during liquid-phase synthesis was attempted. The magnetization, morphology, crystal structure, and chemical species of as-prepared samples were characterized by vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray energy-dispersive spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). The experimental results showed that the surface of the γ-Fe2O3 nanoparticles can be modified by adding ZnCl2 to form composite nanoparticles with a γ-Fe2O3/ZnFe2O4 ferrite core coated with Zn (OH)2 and absorbed FeCl36H2O; this modification can be enhanced by additional NaOH.

scholarly journals Copper Containing Glass-Based Bone Adhesives for Orthopaedic Applications: Glass Characterization and Advanced Mechanical Evaluation

2020 ◽  
Author(s):  
Sahar. Mokhtari ◽  
Anthony.W. Wren
Keyword(s):  
Mechanical Properties ◽  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Viscoelastic Behavior ◽  
Polymer Chains ◽  
Nano Particles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Compression Data

AbstractThis study addresses issues with currently used bone adhesives, by producing novel glass based skeletal adhesives through modification of the base glass composition to include copper (Cu) and by characterizing each glass with respect to structural changes. Bioactive glasses have found applications in fields such as orthopedics and dentistry, where they have been utilized for the restoration of bone and teeth. The present work outlines the formation of flexible organic-inorganic polyacrylic acid (PAA) – glass hybrids, commercial forms are known as glass ionomer cements (GICs). Initial stages of this research will involve characterization of the Cu-glasses, significant to evaluate the properties of the resulting adhesives. Scanning electron microscopy (SEM) of annealed Cu glasses indicates the presence of partial crystallization in the glass. The structural analysis of the glass using Raman suggests the formation of CuO nanocrystals on the surface. X-ray diffraction (XRD) pattern and X-ray photoelectron spectroscopy (XPS) further confirmed the formation of crystalline CuO phases on the surface of the annealed Cu-glass. The setting reaction was studied using Fourier transform infrared spectroscopy (ATR-FTIR). The mechanical properties of the Cu containing adhesives exhibited gel viscoelastic behavior and enhanced mechanical properties when compared to the control composition. Compression data indicated the Cu glass adhesives were efficient at energy dissipation due to the reversible interactions between CuO nano particles and PAA polymer chains.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

Characterization of Fe–Ni(C) nanocapsules synthesized by arc discharge in methane

1999 ◽  
Vol 14 (5) ◽  
pp. 1782-1790 ◽  
Author(s):  
X. L. Dong ◽  
Z. D. Zhang ◽  
S. R. Jin ◽  
W. M. Sun ◽  
X. G. Zhao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Arc Discharge ◽  
Carbon Layer ◽  
Magnetization Measurement ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Energy Disperse Spectroscopy

Ultrafine Fe–Ni(C) particles of various compositions were prepared by arc discharge synthesis in a methane atmosphere. The particles were characterized by x-ray diffraction, transmission electron microscopy, energy disperse spectroscopy, chemical analysis, x-ray photoelectron spectroscopy, Mössbauer spectroscopy, and magnetization measurement. The carbon atoms solubilizing at interstitial sites in γ–(Fe, Ni, C) solution particles have the effects of forming austenite structure and changing microstructures as well as magnetic properties. A carbon layer covers the surface of Fe–Ni(C) particles to form the nanocapsules and protect them from oxidization. The mechanism of forming Fe–Ni(C) nanocapsules in the methane atmosphere was analyzed.

Preparation, Characterization of Nonmetal Doped TiO2 Nanoparticles with their Excellent Photocatalystic Properties

2011 ◽  
Vol 183-185 ◽  
pp. 2254-2257
Author(s):  
Ying Wei Wang ◽  
Yu Fei Li ◽  
Pei Han Yang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Photocatalytic Performance ◽  
Anatase Phase ◽  
Titania Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
One Step ◽  
Doped Titania ◽  
Nonmetal Doping

Nonmetal (S, P) doped titania nanoparticles were synthesized by a one step hydrothermal method. These samples were calcined with different temperature, the sample exist in anatase phase has much higher photocatalytic activity for methylene blue (MB) degradation. The visible response and the higher UV activity of the different nonmetal doped TiO2make it possible to utilize solar energy efficiently to execute photocatalysis processes. The resulting materials were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), etc. It can conclude the nonmetal doping TiO2proves to be more suitable to improve the photocatalytic performance.

Surface Characterization of Carbon-Bearing Magnetite (CBM) and Carbon-Bearing Ni(II)-Ferrite (CBNF)

1994 ◽  
Vol 344 ◽  
Author(s):  
T. Sano ◽  
K. Akanuma ◽  
M. Tsuji ◽  
Y. Tamaura
Keyword(s):  
Photoelectron Spectroscopy ◽  
Spinel Structure ◽  
Surface Characterization ◽  
Carbon Deposition ◽  
X Ray Diffraction ◽  
Xps Spectra ◽  
X Ray ◽  
Oxygen Ions ◽  
Diffraction Patterns

AbstractOxygen-deficient magnetite (ODM; Fe3O4-δ, δ>0) synthesized by reduction of magnetite with H2 at 300°C decomposed CO2 to carbon with an efficiency of nearly 100% at 300°C. In this reaction, two oxygen ions of the CO2 were incorporated into the spinel structure of ODM and carbon was deposited on the surface of ODM with zero valence to form visible particles. The particles of carbon separated from ODM were studied by Raman, energy-dispersive X-ray and wave-dispersive X-ray spectroscopies. The carbon which had been deposited on the ODM was found to be a mixture of graphite and amorphous carbon in at least two levels of crystallization. X-ray photoelectron spectroscopy and X-ray diffraction patterns of the carbon-bearing magnetite (CBM) showed no indication of carbide (Fe3C) or metallic iron (α-Fe) phase formation. In the C 1s XPS spectra of the CBM, no peaks were observed which could be assigned to CO2 or CO. X-ray diffractometry, chemical analysis and TG-MS measurement showed that the carbon-bearing Ni(II)-ferrite (CBNF) (Ni(II)/Fetotal = 0.15) synthesized by the carbon deposition reaction from CO2 with the H2-reduced Ni(II)-ferrite was represented by (Ni0.28Fe2.72O4.00)1-δ (Ni2+06.9Fe2+2.31O3.00)δCτ (δ= 0.27, τ= 0.17). The carbon of the CBNF gave the CIOlayer-like oxide containing some Ni2+ ions.

Sign in / Sign up

Export Citation Format

Share Document