scholarly journals Suction Flows Generated by the Carnivorous Bladderwort Utricularia—Comparing Experiments with Mechanical and Mathematical Models

Fluids ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 33 ◽  
Author(s):  
Krizma Singh ◽  
Roberto C. Reyes ◽  
Gabriel Campa ◽  
Matthew D. Brown ◽  
Fatima Hidalgo ◽  
...  
Keyword(s):  
Solid Mechanics ◽  
Larval Fish ◽  
Fish Larvae ◽  
Experimental Studies ◽  
Axial Flow ◽  
Aquatic Organisms ◽  
Suction Feeding ◽  
Scaled Model ◽  
Feeding Mode ◽  
Biological Studies

Suction feeding is a well-understood feeding mode among macroscopic aquatic organisms. The little we know about small suction feeders from larval fish suggests that small suction feeders are not effective. Yet bladderworts, an aquatic carnivorous plant with microscopic underwater traps, have strong suction performances despite having the same mouth size as that of fish larvae. Previous experimental studies of bladderwort suction feeding have focused on the solid mechanics of the trap door’s opening mechanism rather than the mechanics of fluid flow. As flows are difficult to study in small suction feeders due to their small size and brief event durations, we combine flow visualization on bladderwort traps with measurements on a mechanical, dynamically scaled model of a suction feeder. We find that bladderwort traps generate flows that are more similar to the inertia-dominated flows of adult fish than the viscosity-dominated flows of larval fish. Our data further suggest that axial flow transects through suction flow fields, often used in biological studies to characterize suction flows, are less diagnostic of the relative contribution of inertia versus viscosity than transverse transects.

scholarly journals Hydrodynamic regime drives flow reversals in suction feeding larval fishes during early ontogeny

2019 ◽  
Author(s):  
Krishnamoorthy Krishnan ◽  
Asif Shahriar Nafi ◽  
Roi Gurka ◽  
Roi Holzman
Keyword(s):  
Numerical Simulations ◽  
High Speed ◽  
Prey Capture ◽  
Sparus Aurata ◽  
Larval Fish ◽  
Fish Larvae ◽  
Numerical Models ◽  
Hydrodynamic Regime ◽  
Suction Feeding ◽  
Larval Fishes

AbstractFish larvae are the smallest self-sustaining vertebrates. As such, they face multiple challenge that stem from their minute size, and from the hydrodynamic regime in which they dwell. This regime of intermediate Reynolds numbers (Re) was shown to affect the swimming of larval fish and impede their ability to capture prey. Numerical simulations indicate that the flow fields external to the mouth in younger larvae result in shallower spatial gradients, limiting the force exerted on the prey. However, observations on feeding larvae suggest that failures in prey capture can also occur during prey transport, although the mechanism causing these failures is unclear. We combine high-speed videography and numerical simulations to investigate the hydrodynamic mechanisms that impede prey transport in larval fishes. Detailed kinematics of the expanding mouth during prey capture by larval Sparus aurata were used to parameterize age-specific numerical models of the flows inside the mouth. These models reveal that, for small larvae that slowly expand their mouth, not all the fluid that enters the mouth cavity is expelled through the gills, resulting in flow reversal at the mouth orifice. This efflux at the mouth orifice was highest in the younger ages, but was also high (>8%) in slow strikes produced by larger fish. Our modeling explains the observations of “in-and-out” events in larval fish, where prey enters the mouth but is not swallowed. It further highlights the importance of prey transport as an integral part in determining suction feeding success.

Evaluation of in situ Enclosures for Larval Fish Studies

1987 ◽  
Vol 44 (1) ◽  
pp. 54-65 ◽  
Author(s):  
Yves de Lafontaine ◽  
William C. Leggett
Keyword(s):  
Larval Fish ◽  
Fish Larvae ◽  
Low Cost ◽  
Experimental Studies ◽  
Size Composition ◽  
Surrounding Water ◽  
Larval Fishes ◽  
Plastic Bags ◽  
Capelin Mallotus Villosus

Two in situ enclosure designs intended for use in larval fish studies were evaluated for their capability to reproduce and track the physical properties of the surrounding water and to maintain the behavioral characteristics of enclosed organisms. The enclosures, which were constructed of porous material, allowed near instantaneous response to natural variations in temperature, salinity, and dissolved oxygen at all depths. Phytoplankton biomass inside the enclosures was less variable than that observed outside and its size composition was related to the porosity of the material used. Particle sinking rates inside the enclosures were much lower than those previously reported for plastic bags, suggesting a higher degree of turbulence in our enclosures. Newly hatched larval capelin (Mallotus villosus) and Zooplankton stocked into the enclosures exhibited diel migration of amplitude similar to that observed in the field. Zooplankton were more homogeneously distributed than fish larvae although heterogeneity decreased at night for both taxa. Low cost, ease of handling, environmental reproducibility, and quality of replication provided by the enclosures make them particularly appropriate for replicated experimental studies of the interactions between larval fishes, their predators, and prey.

A technique for detection of larval fish in the digestive tract of predators by otolith marking

2017 ◽  
Vol 68 (1) ◽  
pp. 167 ◽  
Author(s):  
M. I. Gómez ◽  
C. M. Fuentes
Keyword(s):  
Digestive Tract ◽  
Larval Fish ◽  
Fish Larvae ◽  
Larval Mortality ◽  
Experimental Studies ◽  
Alizarin Red ◽  
Prochilodus Lineatus ◽  
Predator Prey ◽  
Fish Predators

The aim of the present study was to develop a method to unequivocally detect pre-flexion fish larvae in the digestive tracts of fish predators, even several hours after their ingestion. For this purpose, we evaluated larval mortality and the quality of the marks generated in sagitta otoliths after 0.5- or 2-h immersion in 50–800mg L–1 alizarin red S stain. The optimal condition (2h, 200mg L–1) was chosen to stain Prochilodus lineatus larvae, which were offered to single predators at 5 or 12 days after marking (DAM). The otoliths were searched in the digestive tract of predators killed 1–17h after ingestion of the prey, and were then examined for mark presence. Otolith recovery rates were high (>70%) and mark detection was above 80% up to 3h after ingestion, but even after 9h, 20–40% of the otoliths were recovered, with mark detection levels of 65%. A higher number of DAM was associated with a higher success in otolith recovery and mark detection. Otolith marking constitutes a single and inexpensive technique that could be applied in both laboratory and field experimental studies of predator–prey interactions.

scholarly journals More than Meets the Eye: Functionally Salient Changes in Internal Bone Architecture Accompany Divergence in Cichlid Feeding Mode

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
R. Craig Albertson ◽  
W. James Cooper ◽  
Kenneth A. Mann
Keyword(s):  
Genetic Basis ◽  
Dominant Mode ◽  
Bone Architecture ◽  
Foraging Strategies ◽  
Craniofacial Skeleton ◽  
Suction Feeding ◽  
Foraging Mode ◽  
Feeding Mode ◽  
Adaptive Radiations ◽  
African Cichlids

African cichlids have undergone extensive and repeated adaptive radiations in foraging habitat. While the external morphology of the cichlid craniofacial skeleton has been studied extensively, biomechanically relevant changes to internal bone architecture have been largely overlooked. Here we explore two fundamental questions: (1) Do changes in the internal architecture of bone accompany shifts in foraging mode? (2) What is the genetic basis for this trait? We focus on the maxilla, which is an integral part of the feeding apparatus and an element that should be subjected to significant bending forces during biting. Analyses of μCT scans revealed clear differences between the maxilla of two species that employ alternative foraging strategies (i.e., biting versus suction feeding). Hybrids between the two species exhibit maxillary geometries that closely resemble those of the suction feeding species, consistent with a dominant mode of inheritance. This was supported by the results of a genetic mapping experiment, where suction feeding alleles were dominant to biting alleles at two loci that affect bone architecture. Overall, these data suggest that the internal structure of the cichlid maxilla has a tractable genetic basis and that discrete shifts in this trait have accompanied the evolution of alternate feeding modes.

scholarly journals Fish larvae exploit edge vortices along their dorsal and ventral fin folds to propel themselves

2016 ◽  
Vol 13 (116) ◽  
pp. 20160068 ◽  
Author(s):  
Gen Li ◽  
Ulrike K. Müller ◽  
Johan L. van Leeuwen ◽  
Hao Liu
Keyword(s):  
Larval Fish ◽  
Fish Larvae ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Bony Fish ◽  
The Body ◽  
Functional Explanation ◽  
Image Velocimetry ◽  
Median Fins

Larvae of bony fish swim in the intermediate Reynolds number ( Re ) regime, using body- and caudal-fin undulation to propel themselves. They share a median fin fold that transforms into separate median fins as they grow into juveniles. The fin fold was suggested to be an adaption for locomotion in the intermediate Reynolds regime, but its fluid-dynamic role is still enigmatic. Using three-dimensional fluid-dynamic computations, we quantified the swimming trajectory from body-shape changes during cyclic swimming of larval fish. We predicted unsteady vortices around the upper and lower edges of the fin fold, and identified similar vortices around real larvae with particle image velocimetry. We show that thrust contributions on the body peak adjacent to the upper and lower edges of the fin fold where large left–right pressure differences occur in concert with the periodical generation and shedding of edge vortices. The fin fold enhances effective flow separation and drag-based thrust. Along the body, net thrust is generated in multiple zones posterior to the centre of mass. Counterfactual simulations exploring the effect of having a fin fold across a range of Reynolds numbers show that the fin fold helps larvae achieve high swimming speeds, yet requires high power. We conclude that propulsion in larval fish partly relies on unsteady high-intensity vortices along the upper and lower edges of the fin fold, providing a functional explanation for the omnipresence of the fin fold in bony-fish larvae.

scholarly journals Osmotic induction improves batch marking of larval fish otoliths with enriched stable isotopes

2014 ◽  
Vol 71 (9) ◽  
pp. 2530-2538 ◽  
Author(s):  
Emmanuel de Braux ◽  
Fletcher Warren-Myers ◽  
Tim Dempster ◽  
Per Gunnar Fjelldal ◽  
Tom Hansen ◽  
...  
Keyword(s):  
Stable Isotopes ◽  
Salmo Salar ◽  
Larval Fish ◽  
Fish Larvae ◽  
Cost Effective ◽  
Industrial Applications ◽  
Chemical Markers ◽  
Potential Applications ◽  
Recent Method ◽  
Batch Marking

Abstract Otolith marking with enriched stable isotopes via immersion is a recent method of batch marking larval fish for a range of research and industrial applications. However, current immersion times and isotope concentrations required to successfully mark an otolith limit the utility of this technique. Osmotic induction improves incorporation and reduces immersion time for some chemical markers, but its effects on isotope incorporation into otoliths are unknown. Here, we tested the effects of osmotic induction over a range of different isotope concentrations and immersion times on relative mark success and strength for 26Mg:24Mg, 86Sr:88Sr and 137Ba:138Ba on Atlantic salmon (Salmo salar) larvae. 71% and 100% mark success were achieved after 1 h of immersion for 86Sr (75 µg L−1) and 137Ba (30 µg L−1) isotopes, respectively. Compared with conventional immersion, osmotic induction improved overall mark strength for 86Sr and 137Ba isotopes by 26–116%, although this effect was only observed after 12 h of immersion and predominately for 86Sr. The results demonstrate that osmotic induction reduces immersion times and the concentrations of isotope required to achieve successful marks. Osmotically induced isotope labels via larval immersion may prove a rapid and cost-effective way of batch marking fish larvae across a range of potential applications.

scholarly journals Feeding of the Brycon cephalus, Triportheus elongatus and Semaprochilodus insignis (osteichthyes, characiformes) larvae in Solimões/Amazonas River and floodplain areas.

2002 ◽  
Vol 32 (3) ◽  
pp. 499-499 ◽  
Author(s):  
Rosseval Galdino LEITE ◽  
Carlos A.R.M. ARAUJO-LIMA
Keyword(s):  
Food Item ◽  
Prey Size ◽  
Larval Fish ◽  
Fish Larvae ◽  
Trophic Relations ◽  
Fish Feeding ◽  
Important Species ◽  
Flooded Forests ◽  
Commercially Important

Information on larval fish feeding is essential for understanding their trophic relations, including the management in conditions totally or partially controlled by humans. An experiment was designed to evaluate the larval diets of three commercially important species. Four varzea-lakes and the adjacent river were sampled with bongo and hand nets from January 1993 to November 1995. Larval diets were evaluated by length-classes and capture sites, and were tested by two factor ANOVA. The larvae were feeding in all habitats, except in the flooded forests. The three species had different diets, which varied with their length and lake. The rotifers were the main initial food item of the three species, replaced by fish larvae in Brycon cephalus, cladocerans in Triportheus elongatus and detritus in Semaprochilodus insignis. The increase of the ingestion limit, as the larvae grew, was higher than the increase in the consumed prey size for the three species.

scholarly journals Long-term changes of ichthyoplankton communities in an Iberian estuary are driven by varying hydrodynamic conditions

2020 ◽  
Author(s):  
M Monteiro ◽  
U M Azeiteiro ◽  
F Martinho ◽  
M A Pardal ◽  
A L Primo
Keyword(s):  
Environmental Variability ◽  
Larval Fish ◽  
Fish Larvae ◽  
Climate Change Impacts ◽  
Variable Structure ◽  
Local Environment ◽  
Strong Relationship ◽  
Marine Species ◽  
Economic Implications ◽  
Species Dominance

Abstract Ichthyoplankton assemblages are key components of estuaries worldwide, playing a vital role as nurseries for fish larvae. Nonetheless, estuaries can be highly affected by ongoing climate change. Impacts of climate variability on ichthyoplankton assemblages will have consequences for marine pelagic food webs and fish populations biology, namely recruitment. This study aims to investigate the influence of environmental variability on an interannual abundance of ichthyoplankton assemblages of the Mondego estuary (Portugal). For this, an ichthyoplankton sampling programme of 13 years (2003–2015) along six distinct sampling stations was analysed to evaluate spatial, seasonal and interannual changes of ichthyoplankton distribution over periods of wet, regular and dry conditions. The ichthyoplanktonic community was dominated by Pomatoschistus spp. across all seasons and conditions, with higher larval abundances during summer and spring. Main changes were related to species seasonality and phenology as well as an increase in the number of marine species during extreme events. The larval fish community showed a strong relationship with the regional and local environment over the study, presenting a distinct yet highly variable structure during the 2009–2013 period. Reported changes will likely trigger major changes in species dominance and abundance, with clear ecological and socio-economic implications.

scholarly journals Multilayered stable 2D nano-sheets of Ti2NTx MXene: synthesis, characterization, and anticancer activity

2019 ◽  
Vol 17 (1) ◽  
Author(s):  
A. Szuplewska ◽  
A. Rozmysłowska-Wojciechowska ◽  
S. Poźniak ◽  
T. Wojciechowski ◽  
M. Birowska ◽  
...  
Keyword(s):  
Biological Activity ◽  
Mammary Epithelial Cells ◽  
Theoretical Calculations ◽  
Experimental Studies ◽  
Reactive Oxygen ◽  
Decisive Role ◽  
Max Phase ◽  
Mechanisms Of Toxicity ◽  
Biological Studies

Abstract Background The biological activity of MXenes has been studied for several years because of their potential biomedical applications; however, investigations have so far been limited to 2D titanium carbides. Although monolayered Ti2NTx MXene has been expected to have biological activity, experimental studies revealed significant difficulties due to obstacles to its synthesis, its low stability and its susceptibility to oxidation and decomposition. Results In this paper, we report our theoretical calculations showing the higher likelihood of forming multilayered Ti2NTx structures during the preparation process in comparison to single-layered structures. As a result of our experimental work, we successfully synthesized multilayered Ti2NTx MXene that was suitable for biological studies by the etching of the Ti2AlN MAX phase and further delamination. The biocompatibility of Ti2NTx MXene was evaluated in vitro towards human skin malignant melanoma cells, human immortalized keratinocytes, human breast cancer cells, and normal human mammary epithelial cells. Additionally, the potential mode of action of 2D Ti2NTx was investigated using reactive oxygen tests as well as SEM observations. Our results indicated that multilayered 2D sheets of Ti2NTx showed higher toxicity towards cancerous cell lines in comparison to normal ones. The decrease in cell viabilities was dose-dependent. The generation of reactive oxygen species as well as the internalization of the 2D sheets play a decisive role in the mechanisms of toxicity. Conclusions We have shown that 2D Ti2NTx in the form of multilayered nanoflakes exhibits fair stability and can be used for in vitro studies. These results show promise for its future applications in biotechnology and nanomedicine.

Sign in / Sign up

Export Citation Format

Share Document