scholarly journals The Combined Effect of Pressure and Temperature on Kefir Production—A Case Study of Food Fermentation in Unconventional Conditions

Foods ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1133
Author(s):  
Ana C. Ribeiro ◽  
Álvaro T. Lemos ◽  
Rita P. Lopes ◽  
Maria J. Mota ◽  
Rita S. Inácio ◽  
...  
Keyword(s):  
Titratable Acidity ◽  
Combined Effect ◽  
Fermentation Time ◽  
Fermentation Rate ◽  
Food Fermentation ◽  
Effect Of Pressure ◽  
Different Temperatures ◽  
The Difference ◽  
Fermentative Process

Food fermentation under pressure has been studied in recent years as a way to produce foods with novel properties. The purpose of this work was to study kefir production under pressure (7–50 MPa) at different temperatures (17–32 °C), as a case study of unconventional food fermentation. The fermentation time to produce kefir was similar at all temperatures (17, 25, and 32 °C) up to 15 MPa, compared to atmospheric pressure. At 50 MPa, the fermentation rate was slower, but the difference was reduced as temperature increased. During fermentation, lactic and acetic acid concentration increased while citric acid decreased. The positive activation volumes (Va) obtained indicate that pressure decreased the fermentation rate, while the temperature rise led to the attenuation of the pressure effect (lower Va). On the other hand, higher activation energies (Ea) were observed with pressure increase, indicating that fermentation became more sensitive to temperature. The condition that resulted in a faster fermentation, higher titratable acidity, and higher concentration of lactic acid was 15 MPa/32 °C. As the authors are aware, this is the second work in the literature to study the combined effect of pressure and temperature on a fermentative process.

EVALUASI PROYEKSI DEMAND BARANG DAN PENUMPANG PELABUHAN DI PROVINSI MALUKU

2019 ◽  
Vol 19 (2) ◽  
pp. 101-110
Author(s):  
Adrian Firdaus ◽  
M. Dwi Yoga Sutanto ◽  
Rajin Sihombing ◽  
M. Weldy Hermawan
Keyword(s):  
Time Series ◽  
Projection Method ◽  
Development Plan ◽  
Master Plan ◽  
Port Development ◽  
Loading And Unloading ◽  
The Difference ◽  
Existing Data

Abstract Every port in Indonesia must have a Port Master Plan that contains an integrated port development plan. This study discusses one important aspect in the preparation of the Port Master Plan, namely the projected movement of goods and passengers, which can be used as a reference in determining the need for facilities at each stage of port development. The case study was conducted at a port located in a district in Maluku Province and aims to evaluate the analysis of projected demand for goods and passengers occurring at the port. The projection method used is time series and econometric projection. The projection results are then compared with the existing data in 2018. The results of this study show that the econometric projection gives adequate results in predicting loading and unloading activities as well as the number of passenger arrival and departure in 2018. This is indicated by the difference in the percentage of projection results towards the existing data, which is smaller than 10%. Whereas for loading and unloading activities, time series projections with logarithmic trends give better results than econometric projections. Keywords: port, port master plan, port development, unloading activities  Abstrak Setiap pelabuhan di Indonesia harus memiliki sebuah Rencana Induk Pelabuhan yang memuat rencana pengem-bangan pelabuhan secara terpadu. Studi ini membahas salah satu aspek penting dalam penyusunan Rencana Induk Pelabuhan, yaitu proyeksi pergerakan barang dan penumpang, yang dapat dipakai sebagai acuan dalam penentuan kebutuhan fasilitas di setiap tahap pengembangan pelabuhan. Studi kasus dilakukan pada sebuah pelabuhan yang terletak di sebuah kabupaten di Provinsi Maluku dan bertujuan untuk melakukan evaluasi ter-hadap analisis proyeksi demand barang dan penumpang yang terjadi di pelabuhan tersebut. Metode proyeksi yang dipakai adalah proyeksi deret waktu dan ekonometrik. Hasil proyeksi selanjutnya dibandingkan dengan data eksisting tahun 2018. Hasil studi ini menunjukkan bahwa proyeksi ekonometrik memberikan hasil yang cukup baik dalam memprediksi aktivitas bongkar barang serta jumlah penumpang naik dan turun di tahun 2018. Hal ini diindikasikan dengan selisih persentase hasil proyeksi terhadap data eksisting yang lebih kecil dari 10%. Sedangkan untuk aktivitas muat barang, proyeksi deret waktu dengan tren logaritmik memberikan hasil yang lebih baik daripada proyeksi ekonometrik. Kata-kata kunci: pelabuhan, rencana induk pelabuhan, pengembangan pelauhan, aktivitas bongkar barang

scholarly journals The Respiration of some Planktonic copepods II. The Effect Of Temperature

1953 ◽  
Vol 31 (3) ◽  
pp. 447-460 ◽  
Author(s):  
D. T. Gauld ◽  
J. E. G. Raymont
Keyword(s):  
Respiratory Rate ◽  
The Body ◽  
The Other ◽  
Effect Of Temperature ◽  
Acartia Clausi ◽  
Temora Longicornis ◽  
Different Temperatures ◽  
Planktonic Copepods ◽  
The Difference ◽  
The Relationship

The respiratory rates of three species of planktonic copepods, Acartia clausi, Centropages hamatus and Temora longicornis, were measured at four different temperatures.The relationship between respiratory rate and temperature was found to be similar to that previously found for Calanus, although the slope of the curves differed in the different species.The observations on Centropages at 13 and 170 C. can be divided into two groups and it is suggested that the differences are due to the use of copepods from two different generations.The relationship between the respiratory rates and lengths of Acartia and Centropages agreed very well with that previously found for other species. That for Temora was rather different: the difference is probably due to the distinct difference in the shape of the body of Temora from those of the other species.The application of these measurements to estimates of the food requirements of the copepods is discussed.

scholarly journals Using a Process Approach to Pandemic Planning: A Case Study

2021 ◽  
Vol 11 (9) ◽  
pp. 4121
Author(s):  
Hana Tomaskova ◽  
Erfan Babaee Tirkolaee
Keyword(s):  
Process Model ◽  
Process Mining ◽  
Process Approach ◽  
Research Topic ◽  
Future Research ◽  
Critical Situation ◽  
Pandemic Planning ◽  
The Difference ◽  
Smart Technologies

The purpose of this article was to demonstrate the difference between a pandemic plan’s textual prescription and its effective processing using graphical notation. Before creating a case study of the Business Process Model and Notation (BPMN) of the Czech Republic’s pandemic plan, we conducted a systematic review of the process approach in pandemic planning and a document analysis of relevant public documents. The authors emphasized the opacity of hundreds of pages of text records in an explanatory case study and demonstrated the effectiveness of the process approach in reengineering and improving the response to such a critical situation. A potential extension to the automation and involvement of SMART technologies or process optimization through process mining techniques is presented as a future research topic.

scholarly journals E-learning-Oriented Software Architecture Design and Case Study

2015 ◽  
Vol 10 (4) ◽  
pp. 59
Author(s):  
Peng Lu ◽  
Xiao Cong ◽  
Dongdai Zhou
Keyword(s):  
Software Architecture ◽  
Building Blocks ◽  
Domain Model ◽  
Learning System ◽  
Application Framework ◽  
Component Library ◽  
E Learning ◽  
The Difference ◽  
High Level

Nowadays, E-learning system has been widely applied to practical teaching. It was favored by people for its characterized course arrangement and flexible learning schedule. However, the system does have some problems in the process of application such as the functions of single software are not diversified enough to satisfy the requirements in teaching completely. In order to cater more applications in the teaching process, it is necessary to integrate functions from different systems. But the difference in developing techniques and the inflexibility in design makes it difficult to implement. The major reason of these problems is the lack of fine software architecture. In this article, we build domain model and component model of E-learning system and components integration method on the basis of WebService. And we proposed an abstract framework of E-learning which could express the semantic relationship among components and realize high level reusable on the basis of informationized teaching mode. On this foundation, we form an E-learning oriented layering software architecture contain component library layer, application framework layer and application layer. Moreover, the system contains layer division multiplexing and was not built upon developing language and tools. Under the help of the software architecture, we could build characterized E-learning system flexibly like building blocks through framework selection, component assembling and replacement. In addition, we exemplify how to build concrete E-learning system on the basis of this software architecture.

Magnetotelluric static shift: Estimation and removal using the cokriging method

Geophysics ◽  
2007 ◽  
Vol 72 (1) ◽  
pp. F25-F34 ◽  
Author(s):  
Benoit Tournerie ◽  
Michel Chouteau ◽  
Denis Marcotte
Keyword(s):  
Apparent Resistivity ◽  
A Priori ◽  
Shift Factor ◽  
Static Shift ◽  
Geostatistical Model ◽  
Data Set ◽  
Resistivity Sounding ◽  
The Difference ◽  
Cross Variogram

We present and test a new method to correct for the static shift affecting magnetotelluric (MT) apparent resistivity sounding curves. We use geostatistical analysis of apparent resistivity and phase data for selected periods. For each period, we first estimate and model the experimental variograms and cross variogram between phase and apparent resistivity. We then use the geostatistical model to estimate, by cokriging, the corrected apparent resistivities using the measured phases and apparent resistivities. The static shift factor is obtained as the difference between the logarithm of the corrected and measured apparent resistivities. We retain as final static shift estimates the ones for the period displaying the best correlation with the estimates at all periods. We present a 3D synthetic case study showing that the static shift is retrieved quite precisely when the static shift factors are uniformly distributed around zero. If the static shift distribution has a nonzero mean, we obtained best results when an apparent resistivity data subset can be identified a priori as unaffected by static shift and cokriging is done using only this subset. The method has been successfully tested on the synthetic COPROD-2S2 2D MT data set and on a 3D-survey data set from Las Cañadas Caldera (Tenerife, Canary Islands) severely affected by static shift.

Synthesis of Polyurethane Dendrimers and Transfer Properties of Dye

2013 ◽  
Vol 457-458 ◽  
pp. 65-71
Author(s):  
Jing Ru Jia
Keyword(s):  
Methyl Orange ◽  
Phase Transfer ◽  
Raw Materials ◽  
Toluene Diisocyanate ◽  
Polymerization Process ◽  
Process Conditions ◽  
Addition Polymerization ◽  
Different Temperatures ◽  
The Difference ◽  
Transfer Properties

The polyfunctional organic compounds 2- hydroxymethyl -1,4- butanediol (trihydric alcohol) and toluene diisocyanate -2, 4- diisocyanate (TDI) were taken as the raw materials in this study. A polyurethane dendrimer was synthesized by utilizing the difference in the reaction activity of two isocyanate groups of TDI at different temperatures. The polymerization process conditions were studied. The addition polymerization of para-position NCO groups occurred at 50 °C, and that of ortho NCO groups occurred at 90 °C. According to the structure of the dendrimer synthesized, methyl orange was used as the guest molecule. Consequently, the aqueous methyl orange showed a phase transfer. With the increase of dendrimer concentration, the transfer rate of methyl orange increased.

Residual Magnetic Moment Influences the Features of Fe3s XPS Spectrum: A Case Study

2021 ◽  
Vol 15 ◽  
Author(s):  
Ranjan K Sahu
Keyword(s):  
Magnetic Moment ◽  
Magnetic Domain ◽  
Anomalous Behavior ◽  
Spectral Features ◽  
Different Temperatures ◽  
Magnetic Origin ◽  
Xps Study ◽  
Increasing Temperature ◽  
Curie Temperature Tc

Background: Fe 3sXPS spectrumexhibits doublet peak instead of predicted singlet peak based on spin-orbit coupling theory. This anomalous behavior is considered to be magnetic origin. However, the effect of residual magnetic moment to the features of Fe3s doublet peakis not understood fully. Objective: This study aims to verify the effect of residual magnetic moment on the spectral features of Fe3s XPS spectrum of magnetic material. Method: As a case study, we have carried out a high temperature XPS study of the Fe 3s spectrum of magnetic domain aligned (MDA) sample with composition composed of SrFe10.8Al1.2O19. In addition, the XPS data have been compared with the data acquired at different temperatures of magnetic domain non-aligned (MDNA) sample. Results: The results show that the majority peak intensity and minority peak width of Fe 3s spectrum of MDA are smaller than those of the MDNA sample, and they increase systematically with increasing temperature. However, it is noted that the features of Fe3s spectrum of both MDA and MDNA samples are completely overlapped near and above the Curie temperature, Tc ~ 670K. Conclusion: The analysis of XPS data suggests that the residual magnetic moment influences the spectral features of Fe3s spectrum. These results provide evidences that it is important to consider the contribution of residual magnetic moment while deriving information from Fe 3s XPS spectrum of MDA sample.

scholarly journals Forest biomass and wood consumption In the lower course of the Amazon: a case study of rhe Urubueua Island

1999 ◽  
Vol 29 (1) ◽  
pp. 79-79 ◽  
Author(s):  
Akio TSUCHIYA ◽  
Mario HIRAOKA
Keyword(s):  
Water Stress ◽  
Forest Structure ◽  
Forest Biomass ◽  
Human Intervention ◽  
Terra Firme ◽  
Wood Volume ◽  
The Difference ◽  
Várzea Forests ◽  
Wood Consumption

Várzea and terra-firme forests in the lower course of the Amazon were compared in terms of forest structure, wood volume increments and forest biomass. The wood volume of várzea forests was smaller than that of terra-firme forests, particularly when severe human intervention such as the cultivation of açaí palm occurred. The difference was even greater in the forest weight comparison because of the lower wood density of várzea trees. These trees are not directly influenced by water stress during the dry season, while late wood with a high density is formed in the terra-firme trees. The annual forest disappearance area due to firewood for tile factories was estimated to be about 276 ha on the island investigated, which had an area of 36,200 ha. Assuming that the forests are rotatively cultivated every 25 to 30 years, the total deforestation area is 6,870-6,948 ha in 25 years and 8,244~8,337 ha in 30 years. This result means that the balance between forest biomass and utilization is not in crisis, however, this balance might be lost as long as substitutive energy such as electricity is not supplied.

scholarly journals V. Electrolytic conduction in solids.—First example. hot glass

1875 ◽  
Vol 23 (156-163) ◽  
pp. 463-464 ◽  
Keyword(s):  
Different Temperatures ◽  
The Difference ◽  
Voltaic Cell

Many years ago I projected an experiment to test the voltaic relations between different metals with glass substituted for the electrolytic liquid of an ordinary simple voltaic cell, and with so high a temperature that the glass would have conducting-power sufficient to allow induction through it to rule the difference of potentials between the two metals. Imperfect instrumental arrangements, and want of knowledge of the temperature at which glass would have sufficient conductivity to give satisfactory results, have hitherto prevented me from carrying out the proposed investigation. The quadrant electrometer has supplied the first of these deficiencies, and Mr. Perry’s recent experiments on the conductivity of glass at different temperatures the second. The investigation has now been resumed; and in a preliminary experiment I have already obtained a very decided result.

Modification of Speech Discrimination in Patients with Binaural Asymmetrical Hearing Loss

1971 ◽  
Vol 36 (2) ◽  
pp. 208-212 ◽  
Author(s):  
Herbert J. Arkebauer ◽  
George T. Mencher ◽  
Carol McCall
Keyword(s):  
Hearing Loss ◽  
Sound Field ◽  
Combined Effect ◽  
Speech Signals ◽  
Speech Discrimination ◽  
The Difference ◽  
Better Than

Ten patients with bilateral asymmetrical hearing losses were tested for differences in speech discrimination scores under the following listening conditions: poorer ear under earphone; better ear under earphone; sound field, ears unoccluded; and sound field, poorer ear occluded. A patient manifesting a bilateral asymmetrical hearing loss may not be able to either separate or integrate two speech signals; however, occlusion of the poorer ear may be an advantageous means of obtaining maximum speech discrimination. Examination of the speech discrimination scores indicates the existence of detrimental interaction between ears exhibiting bilateral asymmetrical hearing loss. These findings also indicate that when the difference between ears is greater, speech discrimination is better than when asymmetry approximates symmetry. Apparently, the greater the impairment in the better ear, the greater the results to be gained by occluding the poorer ear. These findings were interpreted as being relevant in determining candidacy for binaural amplification. Such candidacy should be determined on the basis of speech discrimination scores obtained from each ear independently, and the combined effect of both aids.

Sign in / Sign up

Export Citation Format

Share Document