scholarly journals Fix-Wavelength Multi-Analyte Detection with Serial SOI Ring Resonators

2021 ◽  
Vol 6 (1) ◽  
pp. 22
Author(s):  
Laura Kasper ◽  
Abbas Zein Al-Din ◽  
Jürgen Bruns ◽  
Rudolf Volkmer ◽  
Klaus Petermann
Keyword(s):  
Ring Resonator ◽  
Ring Resonators ◽  
Selective Binding ◽  
Binding Characteristics ◽  
Optical Coefficient ◽  
Optical Output ◽  
Time Division Multiplex ◽  
Analyte Detection ◽  
Time Division

We present a method for the read-out of five serially arranged SOI ring resonator-based biosensors at a speed of 3 Hz/sensor and a fixed wavelength of 1550 nm. The system uses the high thermo-optical coefficient of silicon by applying AC voltages to periodically heat up electrodes adjacent to each sensor. A time-division multiplex scheme allows the allocation of the measured optical output from the mutual spectrum to each specific resonator. We demonstrate our system by immobilizing two different antibodies (biotin and a hexa-His-peptide) at the surface of selected resonators and successfully showing the selective binding characteristics of analyte probing in a microfluidics supported experiments.

High-Q Silicon-on-Insulator Micro-Ring Resonator with Silica Covering

2013 ◽  
Vol 684 ◽  
pp. 443-446
Author(s):  
Chao Liu ◽  
Chen Yang Xue ◽  
Dan Feng Cui ◽  
Jun Bin Zang ◽  
Yong Hua Wang ◽  
...  
Keyword(s):  
Electron Beam ◽  
Transmission Spectrum ◽  
Electron Beam Lithography ◽  
Ring Resonator ◽  
Sio2 Layer ◽  
Silicon On Insulator ◽  
New Method ◽  
Ring Resonators ◽  
Q Factor ◽  
High Q

We designed High-Q micro-ring resonators based on SOI material. A new method of using a top SiO2 layer to cover the waveguide is applied and the tested Q factor is as high as 1.0135×104. Micro-ring resonator has been fabricated using Electron-Beam Lithography and Inductive Coupled Plasma. OptiFDTD was used to simulate the micro-ring resonator and we compared the transmission spectrum of this resonator with the resonator without SiO2 covering.

scholarly journals Effect of Input Amplitude to Power Amplification in Various Orientation of Ring Resonator

2016 ◽  
Vol 1 (1) ◽  
Author(s):  
Haryana Mohd Hairi
Keyword(s):  
Ring Resonator ◽  
Simulation Software ◽  
Ring Resonators ◽  
Input Amplitude ◽  
Power Amplification ◽  
Optical Circuit ◽  
Potential Applications ◽  
Wavelength Filter ◽  
Waveguide Resonators ◽  
Wavelength Filtering

<p>Photonic ring waveguide resonators have great potential applications in wavelength filtering, switching, modulation and multiplexing.  The response of coupled ring resonators can be designed by using various coupling configurations. Particularly, ring resonators can be used as wavelength filter when the wavelength fits a whole multiple times in the circumference of the ring.  In this paper, we investigate the effect of input amplitude to power amplification in four ring resonator configurations and vary the input amplitude on five different wavelengths.  With OptiFDTD Photonics Simulation Software V8.0, the results show the intensity phenomenon of filtering in optical circuit.</p><p> </p>

scholarly journals Excitation Schemes of Plasmonic Angular Ring Resonator-Based Band-Pass Filters Using a MIM Waveguide

Photonics ◽  
2019 ◽  
Vol 6 (2) ◽  
pp. 41 ◽  
Author(s):  
Vishwanath Mittapalli ◽  
Habibulla Khan
Keyword(s):  
Ring Resonator ◽  
Simulation Software ◽  
Ring Resonators ◽  
Band Pass Filter ◽  
Pass Filter ◽  
Analysis And Design ◽  
Compact Size ◽  
Metal Insulator Metal ◽  
Band Pass ◽  
Mim Waveguide

This article describes the analysis and design of the excitation schemes of the plasmonic angular ring resonator-based band-pass filters using a metal-insulator-metal (MIM) waveguide. The excitation schemes of the plasmonic angular ring resonator-based band-pass filters have been analyzed in terms of their physical length by using commercially available electromagnetic full-wave simulation software (CST microwave studio). The excitation schemes of the plasmonic angular ring resonator-based band-pass filter using a MIM waveguide have been realized at the optical O (1260–1360 nm) and U (1625–1675 nm) bands, respectively, as it has dual-band characteristics. The excitation schemes of the plasmonic angular ring resonators have been designed and simulated to determine the variation in transmission and reflection coefficients. The magnetic field distribution of the proposed filters was observed. The ring resonators require low power and had a compact size, which was further used for the development of photonic integrated circuits (PICs). The applications of these resonators are further extended and they are used in the development of antennas, branch line couplers, directional couplers and diplexers.

Rapid chemical vapor sensing and micro gas chromatography detection using optofluidic ring resonators

2008 ◽  
Vol 1133 ◽  
Author(s):  
Yuze Sun ◽  
Siyka I. Shopova ◽  
Ian M. White ◽  
Hongying Zhu ◽  
Greg Frye-Mason ◽  
...  
Keyword(s):  
Gas Chromatography ◽  
Ring Resonator ◽  
Circular Cross Section ◽  
Chemical Vapor ◽  
Spectral Shift ◽  
Ring Resonators ◽  
Glass Capillary ◽  
Vapor Sensing ◽  
Vapor Mixtures ◽  
The Individual

Abstract We develop rapid chemical vapor sensors and micro gas chromatography (μGC) analyzers based on the optofluidic ring resonator (OFRR). An OFRR is a micro-sized thin-walled glass capillary; the circular cross-section of the capillary acts as an optical ring resonator while the whispering gallery modes or circulating waveguide modes (WGMs) supported by the ring resonator interact with the vapor samples passing through the capillary. The OFRR interior surface is coated with a vapor-sensitive polymer. The analyte and polymer interaction causes the polymer refractive index (RI) and the thickness to change, which is detected as a WGM spectral shift. Owing to the excellent fluidics, the OFRR vapor sensor exhibits sub-second detection and recovery time with a flow rate of 1 mL/min. On-column separation and detection in the OFRR based μGC system is also demonstrated, showing efficient separation of vapor mixtures and presenting highly reproducible retention time for the individual analyte. Compared to the conventional GC system, the OFRR μGC has the advantage of small size, rapid response, and high selectivity over a short length of column.

An Optical Half Adder Using Nonlinear Ring Resonator Based on Photonic Crystal

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Mohsen Ebrahimi ◽  
Sahel Javahernia
Keyword(s):  
Photonic Crystal ◽  
Time Delay ◽  
Ring Resonator ◽  
Optical Power ◽  
Logic Gates ◽  
Ring Resonators ◽  
Optical Logic ◽  
Nonlinear Photonic Crystal ◽  
Half Adder ◽  
Glass Rods

AbstractNonlinear photonic crystal ring resonators are suitable mechanisms that can be used for designing optical logic gates and digital structures. In this paper, we designed two nonlinear resonant rings by adding doped glass rods inside the photonic crystal ring resonator. An optical half adder was designed using these nonlinear photonic crystal ring resonators. We used plane wave expansion and finite difference time domain methods to simulate our optical half adder. The simulations show that when one of the input ports is ON, the normalized optical power at the S is about 90 %. The time delay in this case is 7 ps. Also when both the input ports are ON, the normalized optical power at the C is about 155 %. The time delay in this case is 8 ps.

Tunable plasmonic-induced transparency based on stub-coupled cascade ring resonator with electro-optical material

2019 ◽  
Vol 33 (18) ◽  
pp. 1950206
Author(s):  
Fang Chen ◽  
Huafeng Zhang ◽  
Lihui Sun ◽  
Jijun Li ◽  
Chunchao Yu
Keyword(s):  
Slow Light ◽  
Ring Resonator ◽  
Optical Switch ◽  
Fdtd Method ◽  
Optical Material ◽  
Ring Resonators ◽  
Refractive Index Sensor ◽  
External Voltage ◽  
All Optical Switch ◽  
Induced Transparency

The electrical control of plasmonic-induced transparency (PIT) via a resonator waveguide system is presented. The proposed structure is composed of a stub and cascade ring resonator. The ring and the stub resonator are filled with electro-optical material which can control the resonance frequency by the external voltage. Two-dimensional finite difference time domain (2D FDTD) method is used to calculate the transmission and field distribution. Single PIT is investigated both by FDTD and Coupled Mode Theory (CMT). The proposed PIT can be tuned by changing the external voltage or the geometric parameters. Double and triple PIT can be obtained by introducing more ring resonators and can be tuned by external voltage. The proposed plasmonic structure may have application in slow light device, nanoscale filter, all-optical switch and refractive index sensor.

Sign in / Sign up

Export Citation Format

Share Document