scholarly journals Influence of Rigid Brazilian Natural Fiber Arrangements in Polymer Composites: Energy Absorption and Ballistic Efficiency

2021 ◽  
Vol 5 (8) ◽  
pp. 201
Author(s):  
Fabio C. Garcia Filho ◽  
Fernanda S. Luz ◽  
Michelle S. Oliveira ◽  
Wendell B. A. Bezerra ◽  
Josiane D. V. Barbosa ◽  
...  
Keyword(s):  
Polymer Composites ◽  
Energy Absorption ◽  
Natural Fiber ◽  
High Energy ◽  
Matrix Composites ◽  
Lignocellulosic Fibers ◽  
Efficiency Performance ◽  
Epoxy Matrix Composite ◽  
Polymeric Matrix Composites ◽  
Armor System

Since the mid-2000s, several studies were carried out regarding the development of ballistic resistant materials based on polymeric matrix composites reinforced with natural lignocellulosic fibers (NLFs). The results reported so far are promising and are often comparable to commonly used materials such as KevlarTM, especially when used as an intermediate layer in a multilayer armor system (MAS). However, the most suitable configuration for these polymer composites reinforced with NLFs when subjected to high strain rates still lacks investigation. This work aimed to evaluate four possible arrangements for epoxy matrix composite reinforced with a stiff Brazilian NLF, piassava fiber, regarding energy absorption, and ballistic efficiency. Performance was evaluated against the ballistic impact of high-energy 7.62 mm ammunition. Obtained results were statistically validated by means of analysis of variance (ANOVA) and Tukey’s honest test. Furthermore, the micromechanics associated with the failure of these composites were determined. Energy absorption of the same magnitude as KevlarTM and indentation depth below the limit predicted by NIJ standard were obtained for all conditions.

High Strength Natural Fibers for Improved Polymer Matrix Composites

2010 ◽  
Vol 638-642 ◽  
pp. 961-966 ◽  
Author(s):  
Sérgio Neves Monteiro ◽  
Kestur Gundappa Satyanarayana ◽  
Felipe Perissé Duarte Lopes
Keyword(s):  
Polymer Composites ◽  
High Performance ◽  
Polymer Matrix Composites ◽  
Natural Fibers ◽  
High Strength ◽  
Strengthening Mechanism ◽  
Matrix Composites ◽  
Lignocellulosic Fibers ◽  
High Performance Fiber ◽  
Curaua Fibers

A statistical evaluation based on the Weibull method was performed to correlate the mechanical properties and the diameter of different lignocellulosic fibers. The sisal, rami and curaua fibers were found to have a hyperbolic correlation between their ultimate strength and diameter. This permitted to select thinner high strength fibers, with over 1000 MPa, as reinforcement for the strongest polymer composites ever fabricated with these fibers. A structural analysis was conducted by electron microscopy to identify the strengthening mechanism for both, the high performance fiber and their improved polymer composites.

scholarly journals Hybrid Polymer Composites Used in the Arms Industry: A Review

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3047
Author(s):  
Kamil Czech ◽  
Rafał Oliwa ◽  
Dariusz Krajewski ◽  
Katarzyna Bulanda ◽  
Mariusz Oleksy ◽  
...  
Keyword(s):  
Polymer Composites ◽  
Energy Absorption ◽  
Shear Thickening ◽  
High Energy ◽  
Absorption Capacity ◽  
Fiber Types ◽  
Energy Absorption Capacity ◽  
Reinforcement Structure ◽  
Specific Strength ◽  
Strength And Stiffness

Polymer fiber composites are increasingly being used in many industries, including the defense industry. However, for protective applications, in addition to high specific strength and stiffness, polymer composites are also required to have a high energy absorption capacity. To improve the performance of fiber-reinforced composites, many researchers have modified them using multiple methods, such as the introduction of nanofillers into the polymer matrix, the modification of fibers with nanofillers, the impregnation of fabrics using a shear thickening fluid (STF) or a shear thickening gel (STG), or a combination of these techniques. In addition, the physical structures of composites have been modified through reinforcement hybridization; the appropriate design of roving, weave, and cross-orientation of fabric layers; and the development of 3D structures. This review focuses on the effects of modifying composites on their impact energy absorption capacity and other mechanical properties. It highlights the technologies used and their effectiveness for the three main fiber types: glass, carbon, and aramid. In addition, basic design considerations related to fabric selection and orientation are indicated. Evaluation of the literature data showed that the highest energy absorption capacities are obtained by using an STF or STG and an appropriate fiber reinforcement structure, while modifications using nanomaterials allow other strength parameters to be improved, such as flexural strength, tensile strength, or shear strength.

Quasi-static penetration behavior of fiber-reinforced polypropylene and acrylonitrile butadiene styrene matrix composites

2021 ◽  
pp. 089270572110079
Author(s):  
Ali İmran Ayten
Keyword(s):  
Glass Fiber ◽  
Energy Absorption ◽  
Matrix Material ◽  
Acrylonitrile Butadiene Styrene ◽  
Fiber Types ◽  
Matrix Composites ◽  
Aramid Fabric ◽  
Penetration Behavior ◽  
Fiber Fabric ◽  
Butadiene Styrene

The quasi-static punch shear behaviors of thermoplastic composites with different polymer matrices and fiber types were investigated. This study was also focused on how much energy absorption capability can be increased by low fiber fractions. Maleic anhydride grafted polypropylene (MA-g-PP) and acrylonitrile butadiene styrene (MA-g-ABS) were used as the matrix material. One layer of aramid, carbon and glass fiber plain weave fabrics was used as the reinforcement material. Quasi-static punch shear test (QS-PST) was applied to the samples to understand the penetration behavior of the samples. The damaged areas were investigated and related to force-displacement curves. The results showed that the neat form of MA-g-PP exhibited 158% more energy absorption than the neat form of MA-g-ABS. In the samples containing one layer of fabric, the highest improvement was observed in the aramid fabric-reinforced MA-g-ABS matrix composites. Aramid fabric increased the energy absorption at a rate of 142.3% in comparison to the neat MA-g-ABS, while carbon fiber fabric and glass fiber fabric increased it by 40% and 63.52%, respectively. Aramid fiber fabric provided no significant improvement in the energy absorption in the MA-g-PP matrix composites, while carbon and glass fiber fabrics contributed to energy absorption at a rate of 48% and 41%, respectively.

scholarly journals Evaluation of Energy Absorption Capabilities of Polyethylene Foam under Impact Deformation

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3613
Author(s):  
Baohui Yang ◽  
Yangjie Zuo ◽  
Zhengping Chang
Keyword(s):  
Energy Absorption ◽  
Failure Modes ◽  
High Strain ◽  
Early Stage ◽  
High Energy ◽  
Test Method ◽  
Test Theory ◽  
Strain Rates ◽  
Impact Properties ◽  
The Impact

Foams are widely used in protective applications requiring high energy absorption under impact, and evaluating impact properties of foams is vital. Therefore, a novel test method based on a shock tube was developed to investigate the impact properties of closed-cell polyethylene (PE) foams at strain rates over 6000 s−1, and the test theory is presented. Based on the test method, the failure progress and final failure modes of PE foams are discussed. Moreover, energy absorption capabilities of PE foams were assessed under both quasi-static and high strain rate loading conditions. The results showed that the foam exhibited a nonuniform deformation along the specimen length under high strain rates. The energy absorption rate of PE foam increased with the increasing of strain rates. The specimen energy absorption varied linearly in the early stage and then increased rapidly, corresponding to a uniform compression process. However, in the shock wave deformation process, the energy absorption capacity of the foam maintained a good stability and exhibited the best energy absorption state when the speed was higher than 26 m/s. This stable energy absorption state disappeared until the speed was lower than 1.3 m/s. The loading speed exhibited an obvious influence on energy density.

scholarly journals Mechanical Properties of Boehmeria nivea Natural Fabric Reinforced Epoxy Matrix Composite Prepared by Vacuum-Assisted Resin Infusion Molding

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1311 ◽  
Author(s):  
Fabio da Costa Garcia Filho ◽  
Fernanda Santos da Luz ◽  
Lucio Fabio Cassiano Nascimento ◽  
Kestur Gundappa Satyanarayana ◽  
Jaroslaw Wieslaw Drelich ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Volume Fraction ◽  
Natural Fibers ◽  
Ramie Fiber ◽  
Resin Infusion ◽  
Lignocellulosic Fibers ◽  
Boehmeria Nivea ◽  
Fabric Composites ◽  
Epoxy Matrix Composite ◽  
Efficient Alternative

Natural lignocellulosic fibers and corresponding fabrics have been gaining notoriety in recent decades as reinforcement options for polymer matrices associated with industrially applied composites. These natural fibers and fabrics exhibit competitive properties when compared with some synthetics such as glass fiber. In particular, the use of fabrics made from natural fibers might be considered a more efficient alternative, since they provide multidirectional reinforcement and allow the introduction of a larger volume fraction of fibers in the composite. In this context, it is important to understand the mechanical performance of natural fabric composites as a basic condition to ensure efficient engineering applications. Therefore, it is also important to recognize that ramie fiber exhibiting superior strength can be woven into fabric, but is the least investigated as reinforcement in strong, tough polymers to obtain tougher polymeric composites. Accordingly, this paper presents the preparation of epoxy composite containing 30 vol.% Boehmeria nivea fabric by vacuum-assisted resin infusion molding technique and mechanical behavior characterization of the prepared composite. Obtained results are explained based on the fractography studies of tested samples.

Sign in / Sign up

Export Citation Format

Share Document