scholarly journals Hybrid Polymer Composites Used in the Arms Industry: A Review

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3047
Author(s):  
Kamil Czech ◽  
Rafał Oliwa ◽  
Dariusz Krajewski ◽  
Katarzyna Bulanda ◽  
Mariusz Oleksy ◽  
...  
Keyword(s):  
Polymer Composites ◽  
Energy Absorption ◽  
Shear Thickening ◽  
High Energy ◽  
Absorption Capacity ◽  
Fiber Types ◽  
Energy Absorption Capacity ◽  
Reinforcement Structure ◽  
Specific Strength ◽  
Strength And Stiffness

Polymer fiber composites are increasingly being used in many industries, including the defense industry. However, for protective applications, in addition to high specific strength and stiffness, polymer composites are also required to have a high energy absorption capacity. To improve the performance of fiber-reinforced composites, many researchers have modified them using multiple methods, such as the introduction of nanofillers into the polymer matrix, the modification of fibers with nanofillers, the impregnation of fabrics using a shear thickening fluid (STF) or a shear thickening gel (STG), or a combination of these techniques. In addition, the physical structures of composites have been modified through reinforcement hybridization; the appropriate design of roving, weave, and cross-orientation of fabric layers; and the development of 3D structures. This review focuses on the effects of modifying composites on their impact energy absorption capacity and other mechanical properties. It highlights the technologies used and their effectiveness for the three main fiber types: glass, carbon, and aramid. In addition, basic design considerations related to fabric selection and orientation are indicated. Evaluation of the literature data showed that the highest energy absorption capacities are obtained by using an STF or STG and an appropriate fiber reinforcement structure, while modifications using nanomaterials allow other strength parameters to be improved, such as flexural strength, tensile strength, or shear strength.

3D-Printed Bio-inspired Zero Poisson’s Ratio Graded Metamaterials with High Energy Absorption Performance

2022 ◽  
Author(s):  
Ramin Hamzehei ◽  
Ali Zolfagharian ◽  
Soheil Dariushi ◽  
Mahdi Bodaghi
Keyword(s):  
Cell Wall ◽  
Energy Absorption ◽  
Poisson’S Ratio ◽  
High Energy ◽  
Absorption Capacity ◽  
Poisson's Ratio ◽  
Base Pairs ◽  
Energy Absorption Capacity ◽  
Static Compression ◽  
Unit Cells

Abstract This study aims at introducing a number of two-dimensional (2D) re-entrant based zero Poisson’s ratio (ZPR) graded metamaterials for energy absorption applications. The metamaterials’ designs are inspired by the 2D image of a DNA molecule. This inspiration indicates how a re-entrant unit cell must be patterned along with the two orthogonal directions to obtain a ZPR behavior. Also, how much metamaterials’ energy absorption capacity can be enhanced by taking slots and horizontal beams into account with the inspiration of the DNA molecule’s base pairs. The ZPR metamaterials comprise multi-stiffness unit cells, so-called soft and stiff re-entrant unit cells. The variability in unit cells’ stiffness is caused by the specific design of the unit cells. A finite element analysis (FEA) is employed to simulate the deformation patterns of the ZPRs. Following that, meta-structures are fabricated with 3D printing of TPU as hyperelastic materials to validate the FEA results. A good correlation is observed between FEA and experimental results. The experimental and numerical results show that due to the presence of multi-stiffness re-entrant unit cells, the deformation mechanisms and the unit cells’ densifications are adjustable under quasi-static compression. Also, the structure designed based on the DNA molecule’s base pairs, so-called structure F''', exhibits the highest energy absorption capacity. Apart from the diversity in metamaterial unit cells’ designs, the effect of multi-thickness cell walls is also evaluated. The results show that the diversity in cell wall thicknesses leads to boosting the energy absorption capacity. In this regard, the energy absorption capacity of structure ‘E’ enhances by up to 33% than that of its counterpart with constant cell wall thicknesses. Finally, a comparison in terms of energy absorption capacity and stability between the newly designed ZPRs, traditional ZPRs, and auxetic metamaterial is performed, approving the superiority of the newly designed ZPR metamaterials over both traditional ZPRs and auxetic metamaterials.

scholarly journals Energy Absorption Capability of Thin-Walled Prismatic Aluminum Tubes with Spherical Indentations

Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4304
Author(s):  
Miroslaw Ferdynus ◽  
Patryk Rozylo ◽  
Michal Rogala
Keyword(s):  
Aluminum Alloy ◽  
Energy Absorption ◽  
Numerical Models ◽  
Energy System ◽  
High Energy ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
Numerical Tests ◽  
Thin Walled ◽  
Crushing Behavior

The paper presents the results of numerical tests of impact and energy absorption capacity of thin-walled columns, subjected to axial impact loading, made of aluminum alloy, and having a square cross-section and spherical indentations on their lateral surfaces. The numerical models were validated using an experiment that was conducted on the Instron CEAST 9350 High Energy System drop hammer. Material properties of the applied aluminum alloy were determined on the basis of a static tension test. The crushing behavior of the columns and some crashworthiness indicators were investigated. On the basis of the results of the conducted analyses, conclusions were drawn about the most beneficial design/constructional variants in terms of achieved crashworthiness parameters.

Electrical and microstructural characteristics of ZnO–Bi2O3-based varistors doped with rare-earth oxides

2001 ◽  
Vol 16 (10) ◽  
pp. 2817-2823 ◽  
Author(s):  
Nguyen The Hung ◽  
Nguyen Dinh Quang ◽  
Slavko Bernik
Keyword(s):  
Rare Earth ◽  
Energy Absorption ◽  
Threshold Voltage ◽  
Spinel Phase ◽  
High Energy ◽  
Absorption Capacity ◽  
Rare Earth Oxides ◽  
High Threshold ◽  
Energy Absorption Capacity ◽  
High Energy Absorption

ZnO-based varistor samples with a relatively high Sb2O3 to Bi2O3 ratio of 5 were fired at 1200 °C and found to have a high threshold voltage (VT) of 280 V/mm and a low energy-absorption capacity of 50 J/cm3. The introduction of rare-earth oxides (REO) increased the energy-absorption capacity of Pr6O11- and Nd2O3-doped samples to 110 J/cm3 while their threshold voltage (VT) remained slightly above 300 V/mm. Doping with Pr6O11 and Nd2O3 altered the formation of the spinel phase and significantly changed its particle size and distribution which, as a result, had a positive effect on the energy-absorption capacity of the REO-doped samples. Doping with small amounts of Pr6O11 and Nd2O3 appears to be promising for the preparation of ZnO-based varistors with a high breakdown voltage and a high energy absorption capacity.

Evaluation of reinforced concrete and reinforced engineered cementitious composite (ECC) members and structures using small-scale testing

2015 ◽  
Vol 42 (3) ◽  
pp. 164-177 ◽  
Author(s):  
Bora Gencturk ◽  
Farshid Hosseini
Keyword(s):  
Reinforced Concrete ◽  
Energy Absorption ◽  
High Energy ◽  
Absorption Capacity ◽  
System Level ◽  
Experimental Program ◽  
Small Scale ◽  
Cementitious Composite ◽  
Energy Absorption Capacity ◽  
Engineered Cementitious Composite

The behavior of reinforced concrete (RC) and reinforced engineered cementitious composites (ECC) was comparatively investigated at the component and system levels through a small-scale (1/8 scale factor) experimental program. The logistical and financial advantages of small-scale testing were utilized to investigate a range of parameters, including the effect of reinforcement ratio and material properties, on the response of reinforced concrete and reinforced ECC structures. The procedures pertaining to material preparation, specimen construction, and input motion development that were critical for enhancing the similarity between the scales are provided. Engineered cementitious composite mixtures with different cost and sustainability indices were evaluated. Under cyclic loading, the stiffness, strength, ductility, and energy absorption capacity of columns made of different ECC mixtures were found to be 110, 65, 45, and 100% higher, respectively, than those of the RC columns. The system level investigation through hybrid simulation showed that the ECC structures sustain less deformation under earthquake excitation due to high energy absorption capacity of the material. The differences in cost, sustainability, and structural performance of different ECC mixtures suggest that a careful selection of materials is required for optimal performance.

Numerical and Experimental Investigation on Corrugation Geometry for Metallic Tubes under Lateral Loading

2018 ◽  
Vol 916 ◽  
pp. 226-231 ◽  
Author(s):  
Arameh Eyvazian ◽  
Hozhabr Mozafari ◽  
Faris Tarlochan ◽  
Abdel Magid S. Hamouda
Keyword(s):  
Energy Absorption ◽  
Cost Effective ◽  
High Energy ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
Stress Variation ◽  
Thin Walled Structures ◽  
Corrugated Tube ◽  
High Energy Absorption ◽  
Tube Structure

Energy absorption devices are being used to protect structures from severe damages and reduce injury to occupants during accidents. The integrated characteristics of crash absorption devices can be classified as high energy absorption capacity, light-weight, and cost-effective. One of the thin-walled structures which has drawn the attention of scientists is corrugated tube structure. In this paper, the effect of corrugation geometry on the crushing parameters of an aluminum corrugated tube is investigated. In this regard, different elliptical corrugation shapes were deemed and the compression response was numerically evaluated under lateral quasi-static loading. Finally, the crashworthiness parameters were extracted and compared to determine the influence of corrugation shape on the crashworthy response. Our results showed that using vertical elliptical corrugation decrease the densification point. Moreover, there is a gradual enhancement of mean crushing load by moving from the horizontal elliptical corrugations to the vertical ones. Also, by modifying of corrugation shape, the stress variation pattern changes, significantly.

scholarly journals Effect of Fiber Mat Density and Crushing Mechanism on the Energy Absorption Capacity of GFRP Crashworthy Tubes

2019 ◽  
Vol 8 (9S3) ◽  
pp. 297-301 ◽  
Keyword(s):  
Energy Absorption ◽  
Deformation Mechanism ◽  
Theoretical Calculations ◽  
Peak Load ◽  
High Energy ◽  
Constant Load ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
High Energy Absorption ◽  
Energy Absorbing

The aim of this study is to examine the effect of fiber mat’s density and deformation mechanism of tubes with and without die compression. In this study a new mode of deformation mechanism of density graded GFRP circular tube is examined when they are subjected to axial compression on to a die and without die to examine its energy absorbing capacity. Theoretical calculations were made to predict the crushing stress of different specimens. It is observed that increasing density of fiber increases energy absorption value but decreases the specific energy absorption and the die could trigger progressive crushing additionally decreasing peak load. Here the compressed tube wall is compelled to be deformed towards the end of compression die with a little range of bending curvature which was forced by the radius of the die at high crushing stress and the major part of the deformation takes place at a nearly constant load, which leads to high energy absorption capacity. Comparison between theoretical prediction values by derived equations and the experimental results shows good correlation.

scholarly journals An experimental study on the bending response of multi-layered fibre-metal-laminates

2019 ◽  
Vol 53 (18) ◽  
pp. 2579-2591 ◽  
Author(s):  
M Kuhtz ◽  
N Buschner ◽  
T Henseler ◽  
A Hornig ◽  
M Klaerner ◽  
...  
Keyword(s):  
Energy Absorption ◽  
Structural Response ◽  
High Energy ◽  
Light Metal ◽  
Absorption Capacity ◽  
Structural Behaviour ◽  
Energy Absorption Capacity ◽  
Fibre Metal Laminates ◽  
Test Parameters ◽  
Fibre Metal

The combination of thin light metal sheets with fibre-reinforced thermoplastic layers in multi-layered fibre-metal-laminates advantageously combines the properties of both material classes. In this way, components can be developed which have both significantly increased specific properties (strength and stiffness with respect to density) and high energy absorption capacity compared with conventional design with mono materials. However, the structural behaviour of crash structures is decisively determined by material behaviour of the thermoplastic and metal constituents as well as the interface properties between both constituents and the corresponding delamination behaviour. To evaluate the structural response of multi-layered fibre-metal-laminates under highly dynamic loading conditions, Charpy tests were performed, where the test parameters, light metal material configuration, support length and laminate thickness, were varied. Moreover, the metal sheet surfaces were pre-treated by embossing to achieve different surface topologies. The influence of the different test parameters on the specific energy absorption capacity was characterised by the analysis of force–displacement curves.

Energy Absorption Capacity of Basalt Sandwich Composite Cylinder Subjected to Axial Compression Loadings

2018 ◽  
Vol 917 ◽  
pp. 7-11 ◽  
Author(s):  
Mohd Nazrul Roslan ◽  
Mohd Yazid Yahya ◽  
Zaini Ahmad ◽  
Azrin Hani Abdul Rashid ◽  
Wen Xue Wang
Keyword(s):  
Energy Absorption ◽  
Orientation Angle ◽  
High Energy ◽  
Absorption Capacity ◽  
Sandwich Composite ◽  
Dominant Factor ◽  
Composite Cylinder ◽  
Basalt Fibre ◽  
Energy Absorption Capacity ◽  
Average Force

In this report presented the investigation of axial progressive compression on sandwich composite cylinder made from basalt fibre reinforced composite tube as skins and polyurethane (EPU) foam as core of the structure. The effect of braid orientation angle of the sandwich skins and foam core thickness were evaluated on the parameter performance namely peak force, average force, total energy absorption, crush force efficiency, and specific energy absorption. The primary failure mode observed was progressive failure fibre cracking and tube’s wall folding and crumping. Experiment result showed that the effect of outer wall braid angle of sandwich tube structure was the dominant factor contributed to high energy absorption capacity. Furthermore, the foam thickness has no significant influences on the SEA value; however, the total diameter size of sandwich tube skins was.

scholarly journals Effect of Structural Parameters and Materials on the Mechanical Characteristics of Expansion Tube

2020 ◽  
Author(s):  
Zizhen Qi ◽  
Yuwu Zhang ◽  
and Yuliang Lin
Keyword(s):  
Tensile Stress ◽  
Energy Absorption ◽  
Mechanical Response ◽  
Structural Parameters ◽  
High Energy ◽  
Absorption Capacity ◽  
Parent Material ◽  
Expansion Tube ◽  
Tube Material ◽  
Energy Absorption Capacity

Expansion tube is ideal energy absorber which dissipates kinetic energy through plastic deformation and friction. There is an urgent need to understand the influence of key parameter, e.g. semi angle, tube material, and friction coefficient, on the mechanical response and energy absorption characteristics of expansion tube. In the present work, the material properties of the tubes were tested under quasi-static loading condition, and the numerical simulations were carried out by using commercial software ABAQUS. Based on the validated finite element simulation, all the semi angle, tube material, and friction have significant effects on the energy absorption capacity of expansion tube. The expansion tube with high tensile stress of parent material have high energy absorption capacity, while the specific energy absorption is linear with the tensile stress/density of tube material. This work would give a guidance to the structural design and parent materials selection for expansion tubes.

Sign in / Sign up

Export Citation Format

Share Document