scholarly journals The Direct Cause of Amplified Wettability: Roughness or Surface Chemistry?

2021 ◽  
Vol 5 (8) ◽  
pp. 213
Author(s):  
Emmanuel E. Ubuo ◽  
Inimfon A. Udoetok ◽  
Andrew T. Tyowua ◽  
Ifiok O. Ekwere ◽  
Hamza S. Al-Shehri
Keyword(s):  
Surface Chemistry ◽  
Solid Material ◽  
Contact Angles ◽  
Gradual Change ◽  
Water Contact ◽  
Drop Shape ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Analysis System ◽  
Glass Surfaces

Higher contact angles or amplified wettability observed on surfaces of rough solid materials are typically expressed as a function of a physical dimension (roughness factor). Herein, we present a simple experimental approach that demonstrates that roughness may only magnify the inherent surface chemistry that seems to have direct influence on surface wettability. We investigate gradual change in surface chemistry (hydrophobisation) of rough and smooth glass surfaces, from a very low concentration (10−7 M) of dichlorodimethylsilane, DCDMS through various intermediate hydrophilic/hydrophobic states to when the surfaces are maximally hydrophobised with DCDMS at 0.1 M. The wettability of the modified glasses was studied by water contact angle measurements using drop shape analysis system (DSA). The data obtained indicate a deviation from Wenzel model, with the functionalized rough glass surfaces showing higher reactivity towards DCDMS when compared to the smooth glass surfaces, indicating that the two surfaces are not chemically identical. Our study reveals that just like transforming a solid material to powder, a well-divided glass (rough) surface may not only exhibit a greater surface area than the smooth counterpart as rightly predicted by the Wenzel model, but seems to be bloated with functional groups (–OH or –CH3) that can amplify surface interaction when such functional species dominate the solid surface.

pH-Dependent Wettability of Carboxyphenyl Films Grafted to Glassy Carbon

2011 ◽  
Vol 64 (1) ◽  
pp. 122 ◽  
Author(s):  
Daniel M. Packwood ◽  
Paula A. Brooksby ◽  
Andrew D. Abell ◽  
Alison J. Downard
Keyword(s):  
Glassy Carbon ◽  
Surrounding Medium ◽  
Contact Angles ◽  
Film Structure ◽  
Water Contact ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Packed Structure ◽  
Ph Dependent ◽  
External Stimuli

Surfaces than can switch their properties in response to external stimuli are of fundamental as well as technological interest. A prerequisite for successful switching in thin surface layers is sufficient free volume in the layer to allow molecular motions or reactions. Multilayer films grafted from aryldiazonium salts have a loosely packed structure and are good candidates for preparation of switchable surfaces. In this work, the pH-dependent wettability of carboxyphenyl films on glassy carbon surfaces is examined using water contact angle measurements. The film structure is manipulated by exposing freshly grafted films to solvents of different polarity; this influences the wettability differences observed between low- and high-pH measurements. The order of measurement of contact angles (from low pH to high, or vice versa) also influences the pH-dependent wettability. The results are consistent with film reorganization, including the formation of dimeric hydrogen-bonded structures, in response to the polarity and pH of the surrounding medium.

Characterization of a Ceramic Powder Surface by Contact Angle Measurements and Infrared Spectroscopy

2012 ◽  
Vol 507 ◽  
pp. 233-238 ◽  
Author(s):  
Bram Neirinck ◽  
Dimitri Soccol ◽  
Jan Fransaer ◽  
Omer Van der Biest ◽  
Jef Vleugels
Keyword(s):  
Contact Angle ◽  
Infrared Spectroscopy ◽  
Surface Chemistry ◽  
Suspended Particle ◽  
Ceramic Powder ◽  
Contact Angles ◽  
Alumina Powder ◽  
Surface Groups ◽  
Angle Measurements ◽  
Contact Angle Measurements

The surface chemistry of a suspended particle greatly affects it behavior during electrophoretic deposition. The type and amount of surface groups determines whether the particles can be charged by interaction with the solvent. Furthermore, it is suspected that the surface chemistry plays a prominent role in the mechanisms governing the actual deposition of the particles. In the present work the surface chemistry of as-received and surface modified alumina powder is characterized by means of contact angle measurements and Diffuse Reflectance Infrared Fourier Transform spectroscopy. The wetting is measured using a modified Washburn method which yields quantitative contact angle values. The acid-base and dispersive surface energy components are calculated from these values using the surface tension component theory. Infrared spectroscopy was used to compare the surface groups of the treated and untreated powders and confirm the trends in surface properties as calculated from the contact angles.

Nanostructured Polymer Brushes With Reversibly Changing Properties

2002 ◽  
Vol 727 ◽  
Author(s):  
Denys Usov ◽  
Manfred Stamm ◽  
Sergiy Minko ◽  
Christian Froeck ◽  
Andreas Scholl ◽  
...  
Keyword(s):  
Polymer Brushes ◽  
Phase Segregation ◽  
Water Contact ◽  
Angle Measurements ◽  
Nanostructured Polymer ◽  
Contact Angle Measurements ◽  
Vertical Segregation ◽  
Oxygen Plasma Etching ◽  
Grafting From ◽  
Photoemission Electron

AbstractWe investigated the interplay between different mechanisms of the lateral and vertical segregation in the synthesized via “grafting from” approach symmetric A/B (where A and B are poly(styrene-co-2,3,4,5,6-pentafluorostyrene) and poly(methylmethacrylate), respectively) polymer brushes upon exposure to different solvents. We used X-ray photoemission electron spectroscopy and microscopy (X-PEEM), AFM, water contact angle measurements, and oxygen plasma etching to study morphology of the brushes. The ripple morphology after toluene (nonselective solvent) revealed elongated lamellar-like domains of A and B polymers alternating across the surface. The dimple-A morphology consisting of round clusters of the polymer A was observed after acetone (selective solvent for B). The top layer was enriched with the polymer B showing that the brush underwent both the lateral and vertical phase segregation. A qualitative agreement with predictions of SCF theory was found.

scholarly journals Epoxy/alumina composite coating on welded steel 316L with excellent wear and anticorrosion properties

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Maryama Hammi ◽  
Younes Ziat ◽  
Zakaryaa Zarhri ◽  
Charaf Laghlimi ◽  
Abdelaziz Moutcine
Keyword(s):  
Electrochemical Behaviour ◽  
Sem Analysis ◽  
Water Contact ◽  
Welded Steel ◽  
Melted Zone ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Alumina Composite ◽  
The Cost ◽  
Good Contrast

AbstractThe main purpose of this study is to elaborate anticorrosive coatings for the welded steel 316L, since this later is widely used in industrial field. Hence, within this work we have studied the electrochemical behaviour of different zones of the welded steel 316 in 1 M HCl media. The macrography study of the welded steel has revealed the different areas with a good contrast. We have stated three different zones, namely; melted zone (MZ), heat affected zone (HAZ) and base metal zone (BM). Impedance studies on welded steel 316L were conducted in 1 M HCl solution, coating of Epoxy/Alumina composite was applied on different zones, in order to reveal the anti-corrosion efficiency in each zone. Scanning electron microscopy (SEM) analysis was undertaken in order to check how far the used coating in such aggressive media protects the studied zones and these findings were assessed by water contact angle measurements. The choice of this coating is based on the cost and the safety. We concluded that the Epoxy/Alumina composite has a good protecting effect regarding welded steel in aggressive media.

scholarly journals PLA-Based Hybrid and Composite Electrospun Fibrous Scaffolds as Potential Materials for Tissue Engineering

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Anna Magiera ◽  
Jarosław Markowski ◽  
Elzbieta Menaszek ◽  
Jan Pilch ◽  
Stanislaw Blazewicz
Keyword(s):  
Tissue Engineering ◽  
Mechanical Tests ◽  
Hybrid Structures ◽  
Poly Lactic Acid ◽  
Electrospinning Technique ◽  
Water Contact ◽  
Human Osteoblasts ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Normal Human

The aim of the study was to manufacture poly(lactic acid)- (PLA-) based nanofibrous nonwovens that were modified using two types of modifiers, namely, gelatin- (GEL-) based nanofibres and carbon nanotubes (CNT). Hybrid nonwovens consisting of PLA and GEL nanofibres (PLA/GEL), as well as CNT-modified PLA nanofibres with GEL nanofibres (PLA + CNT/GEL), in the form of mats, were manufactured using concurrent-electrospinning technique (co-ES). The ability of such hybrid structures as potential scaffolds for tissue engineering was studied. Both types of hybrid samples and one-component PLA and CNTs-modified PLA mats were investigated using scanning electron microscopy (SEM), water contact angle measurements, and biological and mechanical tests. The morphology, microstructure, and selected properties of the materials were analyzed. Biocompatibility and bioactivity in contact with normal human osteoblasts (NHOst) were studied. The coelectrospun PLA and GEL nanofibres retained their structures in hybrid samples. Both types of hybrid nonwovens were not cytotoxic and showed better osteoinductivity in comparison to scaffolds made from pure PLA. These samples also showed significantly reduced hydrophobicity compared to one-component PLA nonwovens. The CNT-contained PLA nanofibres improved mechanical properties of hybrid samples and such a 3D system appears to be interesting for potential application as a tissue engineering scaffold.

scholarly journals Synthesis, Hydrophilicity and Micellization of Coil–Brush Polystyrene-b-(polyglycidol-g-polyglycidol) Copolymer—Comparison with Linear Polystyrene-b-Polyglycidol

Polymers ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 253
Author(s):  
Mariusz Gadzinowski ◽  
Maciej Kasprów ◽  
Teresa Basinska ◽  
Stanislaw Slomkowski ◽  
Łukasz Otulakowski ◽  
...  
Keyword(s):  
Contact Angle ◽  
Self Assembly ◽  
Original Method ◽  
Critical Micellization Concentration ◽  
Water Contact ◽  
1H And 13C Nmr ◽  
Similar Composition ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Static Conditions

In this paper, an original method of synthesis of coil–brush amphiphilic polystyrene-b-(polyglycidol-g-polyglycidol) (PS-b-(PGL-g-PGL)) block copolymers was developed. The hypothesis that their hydrophilicity and micellization can be controlled by polyglycidol blocks architecture was verified. The research enabled comparison of behavior in water of PS-b-PGL copolymers and block–brush copolymers PS-b-(PGL-g-PGL) with similar composition. The coil–brush copolymers were composed of PS-b-PGL linear core with average DPn of polystyrene 29 and 13 of polyglycidol blocks. The DPn of polyglycidol side blocks of coil–b–brush copolymers were 2, 7, and 11, respectively. The copolymers were characterized by 1H and 13C NMR, GPC, and FTIR methods. The hydrophilicity of films from the linear and coil–brush copolymers was determined by water contact angle measurements in static conditions. The behavior of coil–brush copolymers in water and their critical micellization concentration (CMC) were determined by UV-VIS using 1,6-diphenylhexa-1,3,5-trien (DPH) as marker and by DLS. The CMC values for brush copolymers were much higher than for linear species with similar PGL content. The results of the copolymer film wettability and the copolymer self-assembly studies were related to fraction of hydrophilic polyglycidol. The CMC for both types of polymers increased exponentially with increasing content of polyglycidol.

scholarly journals Producing High Wettable Surface on Pure Titanium Sheets by Shot Peening for Bone Implant Applications

2021 ◽  
Vol 12 (5) ◽  
pp. 5745-5752
Keyword(s):  
Grain Refinement ◽  
Shot Peening ◽  
Pure Titanium ◽  
Contact Angles ◽  
Grain Structure ◽  
Microstructure Modification ◽  
Fine Grain ◽  
Angle Measurements ◽  
Peak Broadening ◽  
Contact Angle Measurements

Pure titanium (Ti) sheets were subjected to shot peening to achieve grain refinement at the surface. Microstructural studies revealed significant grain refinement at the surface of the Ti sheet after shot peening. The affected thickness of the grain refined region was measured as 150 µm at the cross-section. Due to the fine grain structure, higher hardness was measured for the processed surface. X-ray diffraction studies of the processed sample showed peak broadening for processed Ti due to shot peening. Wettability studies conducted by contact angle measurements clearly showed increased hydrophilicity for the processed Ti as reflected in the lower contact angles. Increased surface energy was calculated for the shot-peened Ti, which can be attributed to the role of the increased fraction of grain boundaries due to microstructure modification. The results demonstrate the potential of the shot peening process to improve the surface wettability and further directly enhance the bioactivity of the Ti implant.

scholarly journals Improved de-inking of inkjet-printed paper using environmentally friendly atmospheric pressure low temperature plasma for paper recycling

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Rodolphe Mauchauffé ◽  
Seung Jun Lee ◽  
Isaac Han ◽  
Sang Hyeong Kim ◽  
Se Youn Moon
Keyword(s):  
Plasma Treatment ◽  
Atmospheric Pressure ◽  
Paper Recycling ◽  
Temperature Plasma ◽  
Water Contact ◽  
Angle Measurements ◽  
Natural Energy ◽  
Contact Angle Measurements ◽  
Speed Up ◽  
Uv Visible

Abstract Nowadays, due to environmental pollution and natural energy consumption caused by waste paper, many researches are being conducted on the reuse of printed-paper. To recycle the paper, de-inking has to be performed. In this article, in order to reduce the use of the commonly used de-inking chemicals, the effect of an atmospheric pressure helium plasma treatment on the de-inking enhancement of printed-paper is studied. Through colorimeter and UV-visible spectrometer measurements the plasma treatment is shown to speed up the de-inking. While SEM observations and FTIR measurements suggest that the paper quality is retained upon plasma treatment, the increase of surface hydrophilicity measured by water contact angle measurements, compared to non-treated paper, is believed to enhance the fiber swelling of the paper and lead to a faster ink removal.

Non-woven Membranes Electrospun from Polylactic Acid Incorporating Silver Nanoparticles as Biocide

2012 ◽  
Vol 1376 ◽  
Author(s):  
Haydee Vargas-Villagran ◽  
Elvia Teran-Salgado ◽  
Maraolina Dominguez-Diaz ◽  
Osvaldo Flores ◽  
Bernardo Campillo ◽  
...  
Keyword(s):  
Contact Angle ◽  
Silver Nanoparticles ◽  
Polylactic Acid ◽  
Chloroform Solution ◽  
Average Diameter ◽  
Electrospinning Process ◽  
Water Contact ◽  
X Ray Scattering ◽  
Angle Measurements ◽  
Contact Angle Measurements

ABSTRACTIn this research, we describe the electrospinning processing of polylactic acid (PLA) and the influence of silver nanoparticles on the morphology and microstructure of produced non woven membranes thus produced. The PLA was electrospun from a chloroform solution and a filamentary and granular morphology was obtained, the filaments having an average diameter of 1.25 μm, When silver nanoparticles (of ca. 12 nm size) were incorporated, the filaments diameter was reduced to an average of 0.65 μm, and the density of beads was also reduced. The membranes were rather amorphous, as revealed by X-ray scattering, presumably due to the quenching process associated with the electrospinning process. Water contact angle measurements showed that silver nanoparticles induced significant hidrophobicity in the membranes as neat PLA membrane had a contact angle of 54° and PLA/Ag membrane exhibited an angle of 115°.

Sign in / Sign up

Export Citation Format

Share Document