scholarly journals Research on Whipping and Jetting Combined Swimming Behavior of Solen strictus Gould

2021 ◽  
Vol 9 (10) ◽  
pp. 1086
Author(s):  
Zhaohui Dong ◽  
Shusheng Bi ◽  
Tian Liu
Keyword(s):  
Ecological Restoration ◽  
Swimming Speed ◽  
Food Environment ◽  
High Speed ◽  
Swimming Behavior ◽  
Behavioral Characteristics ◽  
High Speed Camera ◽  
Razor Clams ◽  
Short Time ◽  
Marine Fishing

Solen strictus Gould are mainly cave dwellers, using their axe feet to dig caves. The Solen strictus Gould also exhibit escape-swimming behavior when food, environment, and so on changes. In this paper, Solen strictus Gould were captured on a high-speed camera as they escaped, and it was found that the Solen strictus Gould whipped while the water spout between the axe foot and the mantle sprayed water outwards. The combined propulsion of these two methods allows the Solen strictus Gould to advance rapidly in a short time. It is calculated that the swimming speed of razor clams is positively correlated with their size and that the adult Solen strictus Gould can travel up to 12 times their body length per second. This study enriches the data on the behavioral characteristics of Solen strictus Gould and is of interest regarding Solen strictus Gould in artificial farming, marine fishing, offshore ecological restoration, and underwater bionic robot development.

scholarly journals Estimation of Current Density Using High-Speed-Camera Recordings in a Model Spark Gap during Surge Currents

2019 ◽  
Vol 6 (1) ◽  
pp. 60-64
Author(s):  
T. H. Kopp ◽  
E. Peters ◽  
M. Kurrat
Keyword(s):  
Current Density ◽  
Radiation Intensity ◽  
High Speed ◽  
Experimental Investigations ◽  
High Speed Camera ◽  
Spark Gap ◽  
Plasma State ◽  
Development Processes ◽  
Current Densities ◽  
Short Time

<p>For experimental investigations of short time plasma in spark gaps, as used in surge protective devices, high-speed camera recordings are used frequently. The analysis of these recordings provides further details regarding the plasma state and distribution. These deduced details are used to assist research and development processes. <br />To increase the benefit of high-speed camera recordings an empirical model is presented to improve the picture analysis. In this model the recorded radiation intensity is empirically related to the current density within a spark gap. Therefore a specially adapted model spark gap was developed and tested. In this model spark gap areas with homogenous current densities occur. These current densities are determined in the experimental setup through current measurements with separated electrodes. Additionally, the relative radiation intensity between the electrodes is identified using high-speed camera recordings. An empirical correlation between these two measurement values was found and is discussed. <br />It confirmed that the determined correlation improve the mostly intuitive interpretation of high speed camera recordings in spark gaps.</p>

scholarly journals Neuro-Inspired Computing with Spin-VCSELs

2021 ◽  
Vol 11 (9) ◽  
pp. 4232
Author(s):  
Krishan Harkhoe ◽  
Guy Verschaffelt ◽  
Guy Van der Sande
Keyword(s):  
Processing Speed ◽  
Delay Time ◽  
High Speed ◽  
State Of The Art ◽  
Polarization Modulation ◽  
Time Interval ◽  
Computing Technique ◽  
High Modulation ◽  
Short Time ◽  
Modulation Speed

Delay-based reservoir computing (RC), a neuromorphic computing technique, has gathered lots of interest, as it promises compact and high-speed RC implementations. To further boost the computing speeds, we introduce and study an RC setup based on spin-VCSELs, thereby exploiting the high polarization modulation speed inherent to these lasers. Based on numerical simulations, we benchmarked this setup against state-of-the-art delay-based RC systems and its parameter space was analyzed for optimal performance. The high modulation speed enabled us to have more virtual nodes in a shorter time interval. However, we found that at these short time scales, the delay time and feedback rate heavily influence the nonlinear dynamics. Therefore, and contrary to other laser-based RC systems, the delay time has to be optimized in order to obtain good RC performances. We achieved state-of-the-art performances on a benchmark timeseries prediction task. This spin-VCSEL-based RC system shows a ten-fold improvement in processing speed, which can further be enhanced in a straightforward way by increasing the birefringence of the VCSEL chip.

scholarly journals Observation and analysis of diving beetle movements while swimming

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Debo Qi ◽  
Chengchun Zhang ◽  
Jingwei He ◽  
Yongli Yue ◽  
Jing Wang ◽  
...  
Keyword(s):  
Swimming Speed ◽  
High Speed ◽  
Kinematic Model ◽  
Movement Pattern ◽  
Unmanned Vehicles ◽  
Power Stroke ◽  
Cross Sectional ◽  
Motion Data ◽  
The Cross ◽  
Diving Beetle

AbstractThe fast swimming speed, flexible cornering, and high propulsion efficiency of diving beetles are primarily achieved by their two powerful hind legs. Unlike other aquatic organisms, such as turtle, jellyfish, fish and frog et al., the diving beetle could complete retreating motion without turning around, and the turning radius is small for this kind of propulsion mode. However, most bionic vehicles have not contained these advantages, the study about this propulsion method is useful for the design of bionic robots. In this paper, the swimming videos of the diving beetle, including forwarding, turning and retreating, were captured by two synchronized high-speed cameras, and were analyzed via SIMI Motion. The analysis results revealed that the swimming speed initially increased quickly to a maximum at 60% of the power stroke, and then decreased. During the power stroke, the diving beetle stretched its tibias and tarsi, the bristles on both sides of which were shaped like paddles, to maximize the cross-sectional areas against the water to achieve the maximum thrust. During the recovery stroke, the diving beetle rotated its tarsi and folded the bristles to minimize the cross-sectional areas to reduce the drag force. For one turning motion (turn right about 90 degrees), it takes only one motion cycle for the diving beetle to complete it. During the retreating motion, the average acceleration was close to 9.8 m/s2 in the first 25 ms. Finally, based on the diving beetle's hind-leg movement pattern, a kinematic model was constructed, and according to this model and the motion data of the joint angles, the motion trajectories of the hind legs were obtained by using MATLAB. Since the advantages of this propulsion method, it may become a new bionic propulsion method, and the motion data and kinematic model of the hind legs will be helpful in the design of bionic underwater unmanned vehicles.

scholarly journals Tracking by Deblatting

2021 ◽  
Author(s):  
Denys Rozumnyi ◽  
Jan Kotera ◽  
Filip Šroubek ◽  
Jiří Matas
Keyword(s):  
High Speed ◽  
High Performance ◽  
Motion Blur ◽  
Velocity Estimation ◽  
High Speed Camera ◽  
Trajectory Function ◽  
Novel Approach ◽  
Blind Deblurring ◽  
Object Trajectories ◽  
Complex Trajectories

AbstractObjects moving at high speed along complex trajectories often appear in videos, especially videos of sports. Such objects travel a considerable distance during exposure time of a single frame, and therefore, their position in the frame is not well defined. They appear as semi-transparent streaks due to the motion blur and cannot be reliably tracked by general trackers. We propose a novel approach called Tracking by Deblatting based on the observation that motion blur is directly related to the intra-frame trajectory of an object. Blur is estimated by solving two intertwined inverse problems, blind deblurring and image matting, which we call deblatting. By postprocessing, non-causal Tracking by Deblatting estimates continuous, complete, and accurate object trajectories for the whole sequence. Tracked objects are precisely localized with higher temporal resolution than by conventional trackers. Energy minimization by dynamic programming is used to detect abrupt changes of motion, called bounces. High-order polynomials are then fitted to smooth trajectory segments between bounces. The output is a continuous trajectory function that assigns location for every real-valued time stamp from zero to the number of frames. The proposed algorithm was evaluated on a newly created dataset of videos from a high-speed camera using a novel Trajectory-IoU metric that generalizes the traditional Intersection over Union and measures the accuracy of the intra-frame trajectory. The proposed method outperforms the baselines both in recall and trajectory accuracy. Additionally, we show that from the trajectory function precise physical calculations are possible, such as radius, gravity, and sub-frame object velocity. Velocity estimation is compared to the high-speed camera measurements and radars. Results show high performance of the proposed method in terms of Trajectory-IoU, recall, and velocity estimation.

Influence of Main Swirler Vane Angle on the Ignition Performance of TeLESS-II Combustor

2016 ◽  
Vol 139 (1) ◽  
Author(s):  
Bo Wang ◽  
Chi Zhang ◽  
Yuzhen Lin ◽  
Xin Hui ◽  
Jibao Li
Keyword(s):  
High Speed ◽  
Inlet Temperature ◽  
Main Stage ◽  
Ignition Process ◽  
High Speed Camera ◽  
Fuel Distribution ◽  
Fuel Droplets ◽  
Planar Laser ◽  
Cfd Method ◽  
Vane Angle

In order to balance the low emission and wide stabilization for lean premixed prevaporized (LPP) combustion, the centrally staged layout is preferred in advanced aero-engine combustors. However, compared with the conventional combustor, it is more difficult for the centrally staged combustor to light up as the main stage air layer will prevent the pilot fuel droplets arriving at igniter tip. The goal of the present paper is to study the effect of the main stage air on the ignition of the centrally staged combustor. Two cases of the main swirler vane angle of the TeLESS-II combustor, 20 deg and 30 deg are researched. The ignition results at room inlet temperature and pressure show that the ignition performance of the 30 deg vane angle case is better than that of the 20 deg vane angle case. High-speed camera, planar laser induced fluorescence (PLIF), and computational fluids dynamics (CFD) are used to better understand the ignition results. The high-speed camera has recorded the ignition process, indicated that an initial kernel forms just adjacent the liner wall after the igniter is turned on, the kernel propagates along the radial direction to the combustor center and begins to grow into a big flame, and then it spreads to the exit of the pilot stage, and eventually stabilizes the flame. CFD of the cold flow field coupled with spray field is conducted. A verification of the CFD method has been applied with PLIF measurement, and the simulation results can qualitatively represent the experimental data in terms of fuel distribution. The CFD results show that the radial dimensions of the primary recirculation zone of the two cases are very similar, and the dominant cause of the different ignition results is the vapor distribution of the fuel. The concentration of kerosene vapor of the 30 deg vane angle case is much larger than that of the 20 deg vane angle case close to the igniter tip and along the propagation route of the kernel, therefore, the 30 deg vane angle case has a better ignition performance. For the consideration of the ignition performance, a larger main swirler vane angle of 30 deg is suggested for the better fuel distribution when designing a centrally staged combustor.

scholarly journals Leader-chasing behavior in negative artificial triggered lightning flashes

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Fukun Wang ◽  
Jianguo Wang ◽  
Li Cai ◽  
Rui Su ◽  
Wenhan Ding ◽  
...  
Keyword(s):  
High Speed ◽  
The Other ◽  
Lightning Flash ◽  
High Speed Camera ◽  
Return Stroke ◽  
Catching Up ◽  
Special Cases ◽  
Triggered Lightning

AbstractTwo special cases of dart leader propagation were observed by the high-speed camera in the leader/return stroke sequences of a classical triggered lightning flash and an altitude-triggered lightning flash, respectively. Different from most of the subsequent return strokes preceded by only one leader, the return stroke in each case was preceded by two leaders occurring successively and competing in the same channel, which herein is named leader-chasing behavior. In one case, the polarity of the latter leader was opposite to that of the former leader and these two combined together to form a new leader, which shared the same polarity with the former leader. In the other case, the latter leader shared the same polarity with the former leader and disappeared after catching up with the former leader. The propagation of the former leader in this case seems not to be significantly influenced by the existence of the latter leader.

scholarly journals Interactive Effects in Two-Droplets Combustion of RP-3 Kerosene under Sub-Atmospheric Pressure

Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1229
Author(s):  
Hongtao Zhang ◽  
Zhihua Wang ◽  
Yong He ◽  
Jie Huang ◽  
Kefa Cen
Keyword(s):  
Burning Rate ◽  
Atmospheric Pressure ◽  
High Speed ◽  
Ambient Pressure ◽  
Interactive Effects ◽  
Propagation Time ◽  
High Speed Camera ◽  
Single Droplet ◽  
Fuel Droplets ◽  
Spacing Distance

To improve our understanding of the interactive effects in combustion of binary multicomponent fuel droplets at sub-atmospheric pressure, combustion experiments were conducted on two fibre-supported RP-3 kerosene droplets at pressures from 0.2 to 1.0 bar. The burning life of the interactive droplets was recorded by a high-speed camera and a mirrorless camera. The results showed that the flame propagation time from burning droplet to unburned droplet was proportional to the normalised spacing distance between droplets and the ambient pressure. Meanwhile, the maximum normalised spacing distance from which the left droplet can be ignited has been investigated under different ambient pressure. The burning rate was evaluated and found to have the same trend as the single droplet combustion, which decreased with the reduction in the pressure. For every experiment, the interactive coefficient was less than one owing to the oxygen competition, except for the experiment at L/D0 = 2.5 and P = 1.0 bar. During the interactive combustion, puffing and microexplosion were found to have a significant impact on secondary atomization, ignition and extinction.

Sign in / Sign up

Export Citation Format

Share Document