scholarly journals Improved Dielectric Properties of Thermoplastic Polyurethane Elastomer Filled with Core–Shell Structured PDA@TiC Particles

Materials ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3341
Author(s):  
Xinfu He ◽  
Jun Zhou ◽  
Liuyan Jin ◽  
Xueying Long ◽  
Hongju Wu ◽  
...  
Keyword(s):  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Thermoplastic Polyurethane ◽  
Low Loss ◽  
Elongation At Break ◽  
The Matrix ◽  
Potential Applications ◽  
Low Levels ◽  
Surface Modified ◽  
Dielectric And Mechanical Properties

Insulating interlayer between nanoparticles and polymer matrix is crucial for suppressing the dielectric loss of polymer composites. In this study, titanium carbide (TiC) particles were surface modified by polydopamine (PDA), and the obtained PDA@TiC powders were used to reinforce thermoplastic polyurethane (TPU). The results indicate that the PDA@TiC were homogenously dispersed in the matrix compared with the pristine TiC, and that the PDA@TiC/TPU composites show improved dielectric and mechanical properties, i.e., much lower dissipation factors and obviously enhanced dielectric breakdown strength, as well as higher tensile strength and elongation at break as compared to the raw TiC/TPU. The nanoscale PDA interlayer contributes to the dielectric and mechanical enhancements because it not only serves as an insulating shell that prevents TiC particles from direct contacting and suppresses the loss and leakage current to very low levels, but also enhances the interfacial interactions thereby leading to improved mechanical strength and toughness. The prepared flexible PDA@TiC/TPU with high permittivity but low loss will find potential applications in electronic and electrical applications.

scholarly journals Improvement of Dielectric Breakdown Performance by Surface Modification in Polyethylene/TiO2 Nanocomposites

Materials ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3346 ◽  
Author(s):  
Weiwang Wang ◽  
Shengtao Li
Keyword(s):  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Interface Region ◽  
Insulation System ◽  
Polar Groups ◽  
Deep Traps ◽  
Relaxation Polarization ◽  
Surface Modified ◽  
Shallow Traps ◽  
Surface Chemical Modification

Dielectric breakdown is a significant property for the insulation system in high voltage power equipment. This paper is dedicated to the improvement of dielectric breakdown by surface-functionalized nanoparticles in low-density polyethylene (LDPE). Prior to the preparation of LDPE/TiO2 nanocomposites, the nanoparticles were surface modified by the silane coupling followed by the chemical reaction process. Results of Fourier transform infrared spectroscopy (FTIR) indicated that some polar groups and chemical bonding were introduced on the surface of TiO2 nanoparticles. A reduction of dielectric permittivity was observed at low nanoparticle loading (<2 wt%) samples, which responded to the restriction of the molecular chain in the interface region. High nanoparticle loadings (2 wt%, 5 wt%, 10 wt%) introduced an obvious relaxation polarization. The trap parameters detected by the thermally stimulated current (TSC) method indicated that the deep traps were introduced by small amounts of nanoparticles (≤2 wt%), while more shallow traps occurred in high loading (5 wt%, 10 wt%) samples. Meanwhile, the increase of breakdown strength at low loading samples were closely related to the deep traps, which was ascribed to the interface region by surface chemical modification.

scholarly journals Temperature Influence on PI/Si3N4 Nanocomposite Dielectric Properties: A Multiscale Approach

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1936
Author(s):  
Mohammed Houssat ◽  
Christina Villeneuve-Faure ◽  
Nadine Lahoud Lahoud Dignat ◽  
Marie-Laure Locatelli ◽  
Jean-Pascal Cambronne
Keyword(s):  
Dielectric Properties ◽  
Dielectric Permittivity ◽  
Strong Correlation ◽  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Multiscale Approach ◽  
Macro Scale ◽  
The Matrix ◽  
Underlying Mechanisms ◽  
Nanocomposite Dielectric

The interphase area appears to have a great impact on nanocomposite (NC) dielectric properties. However, the underlying mechanisms are still poorly understood, mainly because the interphase properties remain unknown. This is even more true if the temperature increases. In this study, a multiscale characterization of polyimide/silicon nitride (PI/Si3N4) NC dielectric properties is performed at various temperatures. Using a nanomechanical characterization approach, the interphase width was estimated to be 30 ± 2 nm and 42 ± 3 nm for untreated and silane-treated nanoparticles, respectively. At room temperature, the interphase dielectric permittivity is lower than that of the matrix. It increases with the temperature, and at 150 °C, the interphase and matrix permittivities reach the same value. At the macroscale, an improvement of the dielectric breakdown is observed at high temperature (by a factor of 2 at 300 °C) for NC compared to neat PI. The comparison between nano- and macro-scale measurements leads to the understanding of a strong correlation between interphase properties and NC ones. Indeed, the NC macroscopic dielectric permittivity is well reproduced from nanoscale permittivity results using mixing laws. Finally, a strong correlation between the interphase dielectric permittivity and NC breakdown strength is observed.

scholarly journals Dielectric Breakdown Strength and Energy Storage Density of CCTO-ZBS Electroceramic

2020 ◽  
Vol 596 ◽  
pp. 012006
Author(s):  
Muhammad Qusyairie Saari ◽  
Julie Juliewatty Mohamed ◽  
Muhammad Azwadi Sulaiman ◽  
Mohd Fariz Abd Rahman ◽  
Zainal Arifin Ahmad ◽  
...  
Keyword(s):  
Energy Storage ◽  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Energy Storage Density ◽  
Dielectric Breakdown Strength ◽  
Storage Density

scholarly journals Construction of a Three-Dimensional BaTiO3 Network for Enhanced Permittivity and Energy Storage of PVDF Composites

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3585
Author(s):  
Xueqing Bi ◽  
Lujia Yang ◽  
Zhen Wang ◽  
Yanhu Zhan ◽  
Shuangshuang Wang ◽  
...  
Keyword(s):  
Energy Storage ◽  
Polyvinylidene Fluoride ◽  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Sol Gel ◽  
Three Dimensional ◽  
Low Dielectric ◽  
Energy Storage Properties ◽  
Discharge Energy Density ◽  
Pure Pvdf

Three-dimensional BaTiO3 (3D BT)/polyvinylidene fluoride (PVDF) composite dielectrics were fabricated by inversely introducing PVDF solution into a continuous 3D BT network, which was simply constructed via the sol-gel method using a cleanroom wiper as a template. The effect of the 3D BT microstructure and content on the dielectric and energy storage properties of the composites were explored. The results showed that 3D BT with a well-connected continuous network and moderate grain sizes could be easily obtained by calcining a barium source containing a wiper template at 1100 °C for 3 h. The as-fabricated 3D BT/PVDF composites with 21.1 wt% content of 3D BT (3DBT–2) exhibited the best comprehensive dielectric and energy storage performances. An enhanced dielectric constant of 25.3 at 100 Hz, which was 2.8 times higher than that of pure PVDF and 1.4 times superior to the conventional nano–BT/PVDF 25 wt% system, was achieved in addition with a low dielectric loss of 0.057 and a moderate dielectric breakdown strength of 73.8 kV·mm−1. In addition, the composite of 3DBT–2 exhibited the highest discharge energy density of 1.6 × 10−3 J·cm−3 under 3 kV·mm−1, which was nearly 4.5 times higher than that of neat PVDF.

scholarly journals Development of a Decellularized Porcine Esophageal Matrix for Potential Applications in Cancer Modeling

Cells ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 1055
Author(s):  
Hersh Chaitin ◽  
Michael L. Lu ◽  
Michael B. Wallace ◽  
Yunqing Kang
Keyword(s):  
Cell Growth ◽  
Lymphatic Vessels ◽  
Significant Loss ◽  
Cancer Cell Growth ◽  
Cell Growth And Migration ◽  
Decellularized Extracellular Matrix ◽  
Cancer Models ◽  
The Matrix ◽  
Potential Applications ◽  
And Migration

Many decellularized extracellular matrix-derived whole organs have been widely used in studies of tissue engineering and cancer models. However, decellularizing porcine esophagus to obtain decellularized esophageal matrix (DEM) for potential biomedical applications has not been widely investigated. In this study a modified decellularization protocol was employed to prepare a porcine esophageal DEM for the study of cancer cell growth. The cellular removal and retention of matrix components in the porcine DEM were fully characterized. The microstructure of the DEM was observed using scanning electronic microscopy. Human esophageal squamous cell carcinoma (ESCC) and human primary esophageal fibroblast cells (FBCs) were seeded in the DEM to observe their growth. Results show that the decellularization process did not cause significant loss of mechanical properties and that blood ducts and lymphatic vessels in the submucosa layer were also preserved. ESCC and FBCs grew on the DEM well and the matrix did not show any toxicity to cells. When FBS and ESCC were cocultured on the matrix, they secreted more periostin, a protein that supports cell adhesion on matrix. This study shows that the modified decellularization protocol can effectively remove the cell materials and maintain the microstructure of the porcine esophageal matrix, which has the potential application of studying cell growth and migration for esophageal cancer models.

scholarly journals Nanocomposites Materials of PLA Reinforced with Nanoclays Using a Masterbatch Technology: A Study of the Mechanical Performance and Its Sustainability

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2133
Author(s):  
Helena Oliver-Ortega ◽  
Josep Tresserras ◽  
Fernando Julian ◽  
Manel Alcalà ◽  
Alba Bala ◽  
...  
Keyword(s):  
Food Packaging ◽  
Mechanical Performance ◽  
Polymeric Materials ◽  
Barrier Properties ◽  
Food Tray ◽  
Environmental Concerns ◽  
Poly Lactic Acid ◽  
The Matrix ◽  
Surface Modified ◽  
Being Moved

Packaging consumes around 40% of the total plastic production. One of the most important fields with high requirements is food packaging. Food packaging products have been commonly produced with petrol polymers, but due to environmental concerns, the market is being moved to biopolymers. Poly (lactic acid) (PLA) is the most promising biopolymer, as it is bio-based and biodegradable, and it is well established in the market. Nonetheless, its barrier properties need to be enhanced to be competitive with other polymers such as polyethylene terephthalate (PET). Nanoclays improve the barrier properties of polymeric materials if correct dispersion and exfoliation are obtained. Thus, it marks a milestone to obtain an appropriate dispersion. A predispersed methodology is proposed as a compounding process to improve the dispersion of these composites instead of common melt procedures. Afterwards, the effect of the polarity of the matrix was analyzing using polar and surface modified nanoclays with contents ranging from 2 to 8% w/w. The results showed the suitability of the predispersed and concentrated compound, technically named masterbatch, to obtain intercalated structures and the higher dispersion of polar nanoclays. Finally, the mechanical performance and sustainability of the prepared materials were simulated in a food tray, showing the best assessment of these materials and their lower fingerprint.

Sign in / Sign up

Export Citation Format

Share Document