Porous Polydimethylsiloxane Elastomer Hybrid with Zinc Oxide Nanowire for Wearable, Wide-Range, and Low Detection Limit Capacitive Pressure Sensor

We propose a flexible capacitive pressure sensor that utilizes porous polydimethylsiloxane elastomer with zinc oxide nanowire as nanocomposite dielectric layer via a simple porogen-assisted process. With the incorporation of nanowires into the porous elastomer, our capacitive pressure sensor is not only highly responsive to subtle stimuli but vigorously so to gentle touch and verbal stimulation from 0 to 50 kPa. The fabricated zinc oxide nanowire–porous polydimethylsiloxane sensor exhibits superior sensitivity of 0.717 kPa−1, 0.360 kPa−1, and 0.200 kPa−1 at the pressure regimes of 0–50 Pa, 50–1000 Pa, and 1000–3000 Pa, respectively, presenting an approximate enhancement by 21−100 times when compared to that of a flat polydimethylsiloxane device. The nanocomposite dielectric layer also reveals an ultralow detection limit of 1.0 Pa, good stability, and durability after 4000 loading–unloading cycles, making it capable of perception of various human motions, such as finger bending, calligraphy writing, throat vibration, and airflow blowing. A proof-of-concept trial in hydrostatic water pressure sensing has been demonstrated with the proposed sensors, which can detect tiny changes in water pressure and may be helpful for underwater sensing research. This work brings out the efficacy of constructing wearable capacitive pressure sensors based on a porous dielectric hybrid with stress-sensitive nanostructures, providing wide prospective applications in wearable electronics, health monitoring, and smart artificial robotics/prosthetics.

Boosted dielectric performance of organic‐inorganic nanocomposites based on BaTiO3 via 2D TiO2 templates

Organic-inorganic hybrid dielectrics composed of nanoscale ceramic fillers in polymer matrices have attracted considerable attention because they can overcome the inherent limitations such as the low dielectric constant, high dielectric loss, and low film density associated with mechanically flexible pristine polymer materials. Barium titanate (BaTiO3), a representative perovskite-based material with a high permittivity, is suitable for applications as nanofillers in nanocomposite dielectrics. X-ray diffraction combined with Raman analysis suggest that a two-step hydrothermal synthesis, which uses synthesized TiO2 nanosheets as a template, is an effective method for the synthesis of pure BaTiO3 nanoparticles compared with other methods. Ultrasonic treatment is employed to disperse BaTiO3 nanoparticles with different concentrations in polyvinyl alcohol (PVA) polymer, and the dielectric performance of the nanocomposite films has been examined. In this study, 20 wt% BaTiO3-PVA nanocomposite dielectric showed superior capacitance and dielectric constant performance, i.e., five times higher than that of the pristine PVA.

Temperature Influence on PI/Si3N4 Nanocomposite Dielectric Properties: A Multiscale Approach

The interphase area appears to have a great impact on nanocomposite (NC) dielectric properties. However, the underlying mechanisms are still poorly understood, mainly because the interphase properties remain unknown. This is even more true if the temperature increases. In this study, a multiscale characterization of polyimide/silicon nitride (PI/Si3N4) NC dielectric properties is performed at various temperatures. Using a nanomechanical characterization approach, the interphase width was estimated to be 30 ± 2 nm and 42 ± 3 nm for untreated and silane-treated nanoparticles, respectively. At room temperature, the interphase dielectric permittivity is lower than that of the matrix. It increases with the temperature, and at 150 °C, the interphase and matrix permittivities reach the same value. At the macroscale, an improvement of the dielectric breakdown is observed at high temperature (by a factor of 2 at 300 °C) for NC compared to neat PI. The comparison between nano- and macro-scale measurements leads to the understanding of a strong correlation between interphase properties and NC ones. Indeed, the NC macroscopic dielectric permittivity is well reproduced from nanoscale permittivity results using mixing laws. Finally, a strong correlation between the interphase dielectric permittivity and NC breakdown strength is observed.

Effects of Functionalized Nano-TiO2 on the Molecular Motion in Epoxy Resin-Based Nanocomposites

Epoxy resin-based nanocomposites have been widely researched for being potential insulating materials in high voltage power equipment. In this paper, nano-TiO2 particles were chosen and surface-modified by a silane coupling agent containing an epoxy group. The effect of functionalized nano-TiO2 doping on the physical properties of epoxy resin was studied. The results of differential scanning calorimetry show that Tg increased significantly and can be increased by up to 35 °C. Therefore, it is believed that the suppression of molecular motion by the addition of nanofillers works effectively in the case of this functionalized nano-TiO2 and a strong interaction between the epoxy resin and the nano-TiO2 was formed after surface modification. Consequently, dynamic mechanical properties, thermal conductivity, electrical conductivity, and trap characteristics of epoxy resin are all adjusted after introducing functionalized nano-TiO2. All of these physical properties were analyzed from the perspective of suppression of molecular motion, and it is of significance to establish the theory of a nanocomposite dielectric. Besides, the results show that the epoxy/TiO2 nanocomposite is expected to be applied in the insulation system of electrical equipment.

Polymer nanocomposite dielectric and electrical properties with quantum dots nanofiller

Nanocomposite films of different contents of CdSe/ZnS quantum dots nanoparticles embedded in hosting matrix of polyvinyl chloride (PVC) were prepared by simple solution casting method. Electrical and dielectric properties of nanocomposites films were investigated in the temperature range 323–393 (K) and at frequencies (50–2000) kHz. The frequency dependence of AC conductivity was following the universal power law. The values of the frequency exponent, s, revealed that the conduction mechanism at low temperature is considered by small polaron tunneling model, whereas at high temperature, it is related to CBH model. The activation energy values [Formula: see text] were depending on nanoparticle concentration as well as frequency. Also, X-ray diffraction (XRD) enabled approximately estimating the average particle size of the nanoparticles incorporated in PVC.