scholarly journals Dielectric Model of Carbon Nanofiber Reinforced Concrete

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4869
Author(s):  
Zhi-Hang Wang ◽  
Jin-Yu Xu ◽  
Er-Lei Bai ◽  
Liang-Xue Nie
Keyword(s):  
Dielectric Constant ◽  
Electromagnetic Wave ◽  
Reinforced Concrete ◽  
Goodness Of Fit ◽  
Carbon Nanofiber ◽  
Complex Refractive Index ◽  
Dielectric Constants ◽  
Average Error ◽  
Internal Damage ◽  
Dielectric Model

The formula describing the relationship between the dielectric constant of a composite and the dielectric constants or volume rates of its components is called a dielectric model. The establishment of a cement concrete dielectric model is the basic and key technique for applying electromagnetic wave technology to concrete structure quality testing and internal damage detection. To construct the dielectric model of carbon nanofiber reinforced concrete, the carbon nanofiber reinforced concrete was measured by the transmission and reflection method for dielectric constant ε, and ε,, in the frequency range of 1.7~2.6 GHz as the fiber content was 0, 0.1%, 0.2%, 0.3% and 0.5%. Meanwhile, concrete was considered as a composite material composed of three phases, matrix (mortar), coarse aggregate (limestone gravel) and air, and the dielectric constants and volume rates of each component phase were tested. The Brown model, CRIM (Complex Refractive Index Model) model and Looyenga model commonly used in composite materials were modified based on the experimental data, suitable dielectric models of carbon nanofiber reinforced concrete were constructed, and a reliability check and error analysis of the modified models were carried out. The results showed that the goodness of fit between the calculated curves based on the three modified models and the measured curves was very high, the accuracy and applicability were very strong and the variation rule for the dielectric constant of carbon nanofiber concrete with the frequency of electromagnetic wave could be described accurately. For ε, and ε,,, the error between the dielectric constant calculated by the three modified models and the corresponding measured values was very small. For the dielectric constant ε,, the average error was maintained below 1.2%, and the minimum error was only 0.35%; for the dielectric constant ε,,, the average error was maintained below 3.55%.

scholarly journals Model of Е-polarized wave propagation in a multilayer dielectric structure

2021 ◽  
Vol 2021 (3) ◽  
pp. 111-118
Author(s):  
P.I. Zabolotnyi ◽  
Keyword(s):  
Dielectric Constant ◽  
Electromagnetic Wave ◽  
Reflection Coefficient ◽  
Incidence Angle ◽  
Relative Dielectric Constant ◽  
Normal Incidence ◽  
Dielectric Constants ◽  
Dielectric Structure ◽  
Range Of Variation ◽  
Multilayer Dielectric

This paper addresses the determination of the dielectric constant of multilayer dielectric structures by radiowave interferometry. In the general case, in interferometry measurements to one measured value of the reflection coefficient there may correspond an infinity of dielectric constants. This ambiguity may be resolved by first determining the effect of different parameters of the probing electromagnetic wave on the reflection coefficient. In particular, it is important to have a preliminary estimate of the effect of the incidence angle and the polarization on the range of variation of the reflection coefficient with the variation of one of the structure parameters. This paper considers the case where a plane E-polarized electromagnetic wave, i.e. a wave whose magnetic field is perpendicular to the incidence plane, is incident on a multilayer dielectric structure. The aim of this work is to develop a model of the propagation of an E-polarized electromagnetic wave through a multilayer dielectric structure at an arbitrary incidence angle and to determine the range of variation of the reflection coefficient with the variation of the dielectric constants of the layers. The paper presents a model of the propagation of an E-polarized electromagnetic wave in a two-layer dielectric structure. A metal base, which is an ideal conductor, underlies the structure. The electromagnetic wave is incident from the air at an arbitrary incidence angle. Based on the model, a method is proposed for measuring the relative dielectric constant and the dielectric loss tangent. It is shown that at a normal incidence the reflection coefficient magnitude is the same both for H- and E-polarization. Because of this, determining the relative dielectric constant and the loss tangent from the measured reflection coefficient magnitude calls for measurements not only at a normal incidence, but also at an oblique incidence, at which the reflection coefficient magnitudes will be different for H- and E-polarization.

scholarly journals Мodel of h-polarized wave propagation in a multilayer dielectric structure

2021 ◽  
Vol 2021 (1) ◽  
pp. 84-91
Author(s):  
P.I. Zabolotnyi ◽  
Keyword(s):  
Dielectric Constant ◽  
Electromagnetic Wave ◽  
Reflection Coefficient ◽  
Incidence Angle ◽  
Dielectric Constants ◽  
Dielectric Structure ◽  
Metal Base ◽  
Coefficient Measurement ◽  
Range Of Variation ◽  
Multilayer Dielectric

This paper addresses the determination of the dielectric constant of multilayer dielectric structures. One of the most-used methods for determining the dielectric constant of multilayer structures is reflection coefficient measurement by interferometry. In the general case, in interferometry measurements to one measured value of the reflection coefficient there may correspond an infinity of dielectric constants. This ambiguity may be resolved by first determining the effect of different parameters of the probing electromagnetic wave on the reflection coefficient. In particular, it is important to have a preliminary estimate of the effect of the incidence angle and the polarization on the range of variation of the reflection coefficient with the variation of one of the structure parameters. This allows one to estimate the boundaries of the range of variation of the reflection coefficient with the variation of the parameter under study. This paper considers the case where a plane H-polarized electromagnetic wave, i.e. a wave whose magnetic field is perpendicular to the incidence plane, is incident on a multilayer dielectric structure. The aim of this work is to develop a model of the propagation of an H-polarized electromagnetic wave through a multilayer dielectric structure at an arbitrary incidence angle and to determine the range of variation of the reflection coefficient with the variation of the dielectric constants of the layers. The paper presents a model of the propagation of an H-polarized electromagnetic wave in a two-layer dielectric structure. A metal base, which is an ideal conductor, underlies the structure. The electromagnetic wave is incident from the air at an arbitrary incidence angle. The model allows one to estimate the reflection coefficient of the structure as a function of its parameters and the incidence angle. The model also makes it possible to analytically estimate the range of variation of the reflection coefficient with the variation of the dielectric constant and the thickness of each layer of the structure. Using the model, the magnitude of the reflection coefficient was determined as a function of the incidence angle and the dielectric constant of the second layer.

scholarly journals Degradation Monitoring in Reinforced Concrete with 3D Localization of Rebar Corrosion and Related Concrete Cracking

2021 ◽  
Vol 11 (15) ◽  
pp. 6772
Author(s):  
Charlotte Van Steen ◽  
Els Verstrynge
Keyword(s):  
Reinforced Concrete ◽  
Degradation Mechanism ◽  
Heterogeneous Material ◽  
Corrosion Damage ◽  
Corrosion Process ◽  
Internal Damage ◽  
Rc Structures ◽  
Degradation Monitoring ◽  
Rebar Corrosion ◽  
Width Measurements

Corrosion of the reinforcement is a major degradation mechanism affecting durability and safety of reinforced concrete (RC) structures. As the corrosion process starts internally, it can take years before visual damage can be noticed on the surface, resulting in an overall degraded condition and leading to large financial costs for maintenance and repair. The acoustic emission (AE) technique enables the continuous monitoring of the progress of internal cracking in a non-invasive way. However, as RC is a heterogeneous material, reliable damage detection and localization remains challenging. This paper presents extensive experimental research aiming at localizing internal damage in RC during the corrosion process. Results of corrosion damage monitoring with AE are presented and validated on three sample scales: small mortar samples (scale 1), RC prisms (scale 2), and RC beams (scale 3). For each scale, the corrosion process was accelerated by imposing a direct current. It is found that the AE technique can detect damage earlier than visual inspection. However, dedicated filtering is necessary to reliably localize AE events. Therefore, AE signals were filtered by a newly developed post-processing protocol which significantly improves the localization results. On the smallest scale, results were confirmed with 3D micro-CT imaging, whereas on scales 2 and 3, results were compared with surface crack width measurements and resulting rebar corrosion levels.

scholarly journals Comment on “investigation of dielectric constants of water in a nano-confined pore” by H. Zhu, F. Yang, Y. Zhu, A. Li, W. He, J. Huang and G. Li, RSC Adv., 2020, 10, 8628

RSC Advances ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 5179-5181
Author(s):  
Sayantan Mondal ◽  
Biman Bagchi
Keyword(s):  
Dielectric Constant ◽  
Dielectric Constants ◽  
Static Dielectric Constant ◽  
Inherent Anisotropy ◽  
Nanoconfined Water

Neglects of inherent anisotropy and distinct dielectric boundaries may lead to completely erroneous results. We demonstrate that such mistakes can give rise to gross underestimation of the static dielectric constant of cylindrically nanoconfined water.

DIELECTRIC CONSTANT AND SEEBECK COEFFICIENT FOR SEMICONDUCTORS: THERMODYNAMIC AND DFT STUDIES

2013 ◽  
Vol 12 (06) ◽  
pp. 1350057 ◽  
Author(s):  
HSIU-YA TASI ◽  
CHAOYUAN ZHU
Keyword(s):  
Boundary Condition ◽  
Dielectric Constant ◽  
Seebeck Coefficient ◽  
Gas Phase ◽  
Present Method ◽  
Dielectric Constants ◽  
Semiconductor Materials ◽  
Electronic Polarizability ◽  
Seebeck Coefficients ◽  
Good Agreement

Dielectric constants and Seebeck coefficients for semiconductor materials are studied by thermodynamic method plus ab initio quantum density functional theory (DFT). A single molecule which is formed in semiconductor material is treated in gas phase with molecular boundary condition and then electronic polarizability is directly calculated through Mulliken and atomic polar tensor (APT) density charges in the presence of the external electric field. This electronic polarizability can be converted to dielectric constant for solid material through the Clausius–Mossotti formula. Seebeck coefficient is first simulated in gas phase by thermodynamic method and then its value divided by its dielectric constant is regarded as Seebeck coefficient for solid materials. Furthermore, unit cell of semiconductor material is calculated with periodic boundary condition and its solid structure properties such as lattice constant and band gap are obtained. In this way, proper DFT function and basis set are selected to simulate electronic polarizability directly and Seebeck coefficient through chemical potential. Three semiconductor materials Mg 2 Si , β- FeSi 2 and SiGe are extensively tested by DFT method with B3LYP, BLYP and M05 functionals, and dielectric constants simulated by the present method are in good agreement with experimental values. Seebeck coefficients simulated by the present method are in reasonable good agreement with experiments and temperature dependence of Seebeck coefficients basically follows experimental results as well. The present method works much better than the conventional energy band structure theory for Seebeck coefficients of three semiconductors mentioned above. Simulation with periodic boundary condition can be generalized directly to treat with doped semiconductor in near future.

scholarly journals A note on some further determinations of the dielectric constants of organic bodies and electrolytes at very low temperatures

1898 ◽  
Vol 62 (379-387) ◽  
pp. 250-266 ◽  
Keyword(s):  
Dielectric Constant ◽  
Low Temperatures ◽  
Tuning Fork ◽  
Dielectric Constants ◽  
The Past ◽  
Method Of Measurement ◽  
The Given ◽  
Past Summer

In several previous communications we have described the investigations made by us on the dielectric constants of various frozen organic bodies and electrolytes at very low temperatures. In these researches we employed a method for the measurement of the dielectric constant which consisted in charging and discharging a condenser, having the given body as dielectric, through a galvanometer 120 times in a second by means of a tuning-fork interrupter. During the past summer we have repeated some of these determinations and used a different method of measurement and a rather higher frequency. In the experiments here described we have adopted Nernst’s method for the measurement of dielectric constants, using for this purpose the apparatus as arranged by Dr. Nernst which belongs to the Davy-Faraday Laboratory.

Epitaxial Growth and Anisotropic Dielectric Properties of La-Doped Bi4Ti3O12 Thin Films

2007 ◽  
Vol 124-126 ◽  
pp. 177-180
Author(s):  
Jang Sik Lee ◽  
Q.X. Jia
Keyword(s):  
Thin Films ◽  
Dielectric Constant ◽  
Dielectric Properties ◽  
Bottom Electrode ◽  
Dielectric Constants ◽  
The Other ◽  
Field Range ◽  
Anisotropic Dielectric ◽  
Dielectric Nonlinearity ◽  
La Doped

To investigate the anisotropic dielectric properties of layer-structured bismuth-based ferroelectrics along different crystal directions, we fabricate devices along different crystal orientations using highly c-axis oriented Bi3.25La0.75Ti3O12 (BLT) thin films on (001) LaAlO3 (LAO) substrates. Experimental results have shown that the dielectric properties of the BLT films are highly anisotropic along different crystal directions. The dielectric constants (1MHz at 300 K) are 358 and 160 along [100] and [110], respectively. Dielectric nonlinearity is also detected along these crystal directions. On the other hand, a much smaller dielectric constant and no detectable dielectric nonlinearity in a field range of 0-200 kV/cm are observed for films along [001] when c-axis oriented SRO is used as the bottom electrode.

Fabrication of low dielectric constant polyimide/TiO2 nanofibers with enhanced UV-light shielding properties

2018 ◽  
Vol 31 (8) ◽  
pp. 986-995
Author(s):  
Lei Wang ◽  
Guifen Gong ◽  
Junyao Shen ◽  
Jinsong Leng
Keyword(s):  
Dielectric Constant ◽  
Light Absorption ◽  
Composite Nanofibers ◽  
Uv Light ◽  
Dielectric Constants ◽  
Low Dielectric Constant ◽  
Number Density ◽  
Tio2 Nanofibers ◽  
Low Dielectric ◽  
Mechanical Tensile

Polyimide (PI)/titanium dioxide (TiO2) composite nanofibers (NFs) with average diameters of 200–250 nm were synthesized via electrospinning. The total number density of dipoles decreased significantly, owing to the porous structures and compact interface between TiO2 NPs and PI matrix. All PI/TiO2 NFs maintain low dielectric constants and losses. For example, the dielectric constants of PI/TiO2-6% NFs are all lower than 2.6, being exposed to temperatures from 25°C to 200°C. Meantime, the dielectric losses of PI/TiO2-6% NFs are below 0.005. For ultraviolet (UV)-light shielding performance, the PI/TiO2 NFs exhibited good UV-light shielding and corresponding anti-photoaging properties. The reason can be ascribed from high UV-light absorption and scattering ability in the TiO2 NPs. The best UV-light absorption (average: 3.71) and corresponding absorption decay (15.13%) were achieved for optimized PI/TiO2-6% NFs. Other fundamental characteristics, such as the thermal stability, mechanical tensile property, and hydrophobicity, were also investigated. Such low dielectric constant PI/TiO2 composite NFs can be alternatively chosen under a longtime UV-light exposing condition.

A Reusable 3D Printed Cavity Resonator for Liquid Sample Characterization

2018 ◽  
Vol 2018 (1) ◽  
pp. 000389-000392
Author(s):  
Saranraj Karuppuswami ◽  
Saikat Mondal ◽  
Mohd Ifwat Mohd Ghazali ◽  
Premjeet Chahal
Keyword(s):  
Dielectric Constant ◽  
Cavity Resonator ◽  
Dielectric Constants ◽  
Sample Holder ◽  
Strongly Coupled ◽  
Weakly Coupled ◽  
Sample Characterization ◽  
3D Printed ◽  
Standard Values ◽  
High Dielectric

Abstract In this paper, additive manufacturing (3D printing) is used to fabricate and demonstrate a reusable microfluidic coupled rectangular cavity resonator for characterizing liquids in small volumes. The designed cavity operates in the fundamental TE101 mode and resonates at 4.12 GHz. The resonance of the cavity is perturbed by the sample placed in a small volume sample holder through a slot in the top cover. Two different perturbation configurations are investigated: i) strongly coupled (liquids with low to medium dielectric constants), and ii) weakly coupled (liquids with medium to high dielectric constant). The sample holder is loaded with different solvents and the shift in the resonance frequency is monitored. Based on these changes, the dielectric constant of the solvent is theoretically estimated and compared to standard values. The reusable liquid sensor holds significant potential in identifying and quantifying unknown liquid samples in the supply chain.

scholarly journals Soil water content estimation using ground penetrating radar data via group intelligence optimization algorithms: An application in the Northern Shaanxi Coal Mining Area

2020 ◽  
pp. 014459872097336
Author(s):  
Fan Cui ◽  
Jianyu Ni ◽  
Yunfei Du ◽  
Yuxuan Zhao ◽  
Yingqing Zhou
Keyword(s):  
Dielectric Constant ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Error Rate ◽  
Ground Penetrating Radar ◽  
Volumetric Water Content ◽  
Average Error ◽  
Average Error Rate ◽  
Ground Penetrating

The determination of quantitative relationship between soil dielectric constant and water content is an important basis for measuring soil water content based on ground penetrating radar (GPR) technology. The calculation of soil volumetric water content using GPR technology is usually based on the classic Topp formula. However, there are large errors between measured values and calculated values when using the formula, and it cannot be flexibly applied to different media. To solve these problems, first, a combination of GPR and shallow drilling is used to calibrate the wave velocity to obtain an accurate dielectric constant. Then, combined with experimental moisture content, the intelligent group algorithm is applied to accurately build mathematical models of the relative dielectric constant and volumetric water content, and the Topp formula is revised for sand and clay media. Compared with the classic Topp formula, the average error rate of sand is decreased by nearly 15.8%, the average error rate of clay is decreased by 31.75%. The calculation accuracy of the formula has been greatly improved. It proves that the revised model is accurate, and at the same time, it proves the rationality of the method of using GPR wave velocity calibration method to accurately calculate the volumetric water content.

Sign in / Sign up

Export Citation Format

Share Document