scholarly journals Synthesis of Tungsten-Doped Vanadium Dioxide Using a Modified Polyol Method Involving 1-Dodecanol

Materials ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 5384
Author(s):  
Yonghyun Lee ◽  
Sang Won Jung ◽  
Sang Hwi Park ◽  
Jung Whan Yoo ◽  
Juhyun Park
Keyword(s):  
Linear Growth ◽  
Mixing Ratio ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Metal Insulator ◽  
X Ray ◽  
Mixing Ratios ◽  
The Difference ◽  
Modified Polyol Method ◽  
Optimal Mixing

The doping of tungsten into VO2 (M) via a polyol process that is based on oligomerization of ammonium metavanadate and ethylene glycol (EG) to synthesize a vanadyl ethylene glycolate (VEG) followed by postcalcination was carried out by simply adding 1-dodecanol and the tungsten source tungstenoxytetrachloride (WOCl4). Tungsten-doped VEGs (W-VEGs) and their calcinated compounds (WxVO2) were prepared with varying mixing ratios of EG to 1-dodecanol and WOCl4 concentrations. Characterizations of W-VEGs by powder X-ray diffraction, differential scanning calorimetry, scanning electron microscopy, and infrared and transmittance spectroscopy showed that tungsten elements were successfully doped into WxVO2, thereby decreasing the metal-insulator transition temperature from 68 down to 51 °C. Our results suggested that WOCl4 variously combined with 1-dodecanol might interrupt the linear growth of W-VEGs, but that such an interruption might be alleviated at the optimal 1:1 mixing ratio of EG to 1-dodecanol, resulting in the successful W doping. The difference in the solar modulations of a W0.0207VO2 dispersion measured at 20 and 70 °C was increased to 21.8% while that of a pure VO2 dispersion was 2.5%. It was suggested that WOCl4 coupled with both EG and 1-dodecanol at an optimal mixing ratio could improve the formation of W-VEG and WxVO2 and that the bulky dodecyl chains might act as defects to decrease crystallinity.

Thermal Stability and Phase Transformation in Hfl-xCux Metallic Glasses

1985 ◽  
Vol 58 ◽  
Author(s):  
R. Schulz ◽  
N. L. Leem ◽  
B. M. Clemens
Keyword(s):  
Phase Transformation ◽  
Metallic Glasses ◽  
Phase Segregation ◽  
Anomalous Behavior ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ductile To Brittle Transition ◽  
The Difference ◽  
Structurally Stable

ABSTRACTIn this paper we report the difference in the structures, physical properties and thermal behaviors of two compositions of amorphous Hf-Cu. One (Hf50CU50) is near the eutectic composition and the other (Hf67Cu33) corresponds to an intermetallic compound. Transmission and scanning electron microscopy (TEM, SEM), differential scanning calorimetry (DSC), electrical resistivity and high-angle X-ray diffraction have been used to study these glasses in detail. Amorphous Hf67 Cu33 is structurally stable up to the crystallization temperature, while Hf50 Cu50 undergoes a ductile to brittle transition associated with a chemicai phase segregation at temperatures far below the glass transition. An anomalous behavior in the resistivity is associated with this phase transformation.

scholarly journals INVESTIGATION ON PHYSICAL AND ELECTRICAL PROPERTIES OF THE SiO2-ZnO NANOCOMPOSITE AT DIFFERENT COMPOSITION MIXINGS

2018 ◽  
Vol 10 (1) ◽  
pp. 18
Author(s):  
Moh. Sinol ◽  
Erika Rani
Keyword(s):  
Dielectric Constant ◽  
Grain Size ◽  
Electrical Properties ◽  
Sintering Temperature ◽  
Mixing Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mixing Method ◽  
The Difference ◽  
New Phase

<p>Physical and electrical properties of The SiO<sub>2</sub>-ZnO mixing at different compositions were investigated. The experiment used simple mixing method at the sintering temperature 600<sup>o</sup>C. It was used the composition mixing ratio of SiO<sub>2</sub>:ZnO ie. 0<strong>:</strong>10; 7<strong>:</strong>3; 5<strong>:</strong>5; 3<strong>:</strong>7; and 10:0 (%Wt)<sub>. </sub>Based on X-Ray Diffraction (XRD) results, it obtained that a new phase in each sample was not formed even though having different diffraction peak. The mixing ratio of SiO<sub>2</sub>: ZnO nanocomposite (7:3 %wt) had the biggest grain size (77,92 nm), the highest dielectric constant (3.00E+05) and the smallest conductivity (0,726549 (Ωm)<sup>-1</sup>). On the other side, the mixing ratio of SiO<sub>2</sub>: ZnO nanocomposite (5:5 %wt) had the smallest grain size (35.42nm), dielectric constant (3.00E+2) and the highest conductivity (25.36729  (Ωm)<sup>-1</sup>). It can be concluded that the difference of composition ratio offered the change on both physical and electrical properties of SiO<sub>2</sub>-ZnO nanocomposite. </p>

Antiphase Boundaries in Ordered Ni3FE Crystals

1969 ◽  
Vol 27 ◽  
pp. 62-63
Author(s):  
Y. H. Liu
Keyword(s):  
Domain Size ◽  
Antiphase Domain ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hardening Mechanism ◽  
Superlattice Structure ◽  
Disordered Phase ◽  
Domain Boundaries ◽  
Atomic Scattering ◽  
The Difference

Ordered Ni3Fe crystals possess a LI2 type superlattice similar to the Cu3Au structure. The difference in slip behavior of the superlattice as compared with that of a disordered phase has been well established. Cottrell first postulated that the increase in resistance for slip in the superlattice structure is attributed to the presence of antiphase domain boundaries. Following Cottrell's domain hardening mechanism, numerous workers have proposed other refined models also involving the presence of domain boundaries. Using the anomalous X-ray diffraction technique, Davies and Stoloff have shown that the hardness of the Ni3Fe superlattice varies with the domain size. So far, no direct observation of antiphase domain boundaries in Ni3Fe has been reported. Because the atomic scattering factors of the elements in NijFe are so close, the superlattice reflections are not easily detected. Furthermore, the domain configurations in NioFe are thought to be independent of the crystallographic orientations.

Studies on the Preparation, Characterization and Solubility of -Cyclodextrin-Roxythromycin Inclusion Complexes

2009 ◽  
Vol 2 (2) ◽  
pp. 523-530
Author(s):  
D. Nagasamy Venkatesh ◽  
S. Karthick ◽  
M. Umesh ◽  
G. Vivek ◽  
R.M. Valliappan ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Inclusion Complexes ◽  
Phase Solubility ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ir Studies ◽  
Poorly Soluble ◽  
Poorly Soluble Drug

Roxythromycin/ β-cyclodextrin (Roxy/ β-CD) dispersions were prepared with a view to study the influence of β-CD on the solubility and dissolution rate of this poorly soluble drug. Phase-solubility profile indicated that the solubility of roxythromycin was significantly increased in the presence of β-cyclodextrin and was classified as AL-type, indicating the 1:1 stoichiometric inclusion complexes. Physical characterization of the prepared systems was carried out by differential scanning calorimetry (DSC), X-ray diffraction studies (XRD) and IR studies. Solid state characterization of the drug β-CD binary system using XRD, FTIR and DSC revealed distinct loss of drug crystallinity in the formulation, ostensibly accounting for enhancement of dissolution rate.

scholarly journals A review of nanotechnology with an emphasis on Nanoplex

2015 ◽  
Vol 51 (2) ◽  
pp. 255-263
Author(s):  
Rupali Nanasaheb Kadam ◽  
Raosaheb Sopanrao Shendge ◽  
Vishal Vijay Pande
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Drug Loading ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Conventional Drug ◽  
Anionic Drugs ◽  
Oppositely Charged ◽  
The Brain

<p>The use of nanotechnology based on the development and fabrication of nanostructures is one approach that has been employed to overcome the challenges involved with conventional drug delivery systems. Formulating Nanoplex is the new trend in nanotechnology. A nanoplex is a complex formed by a drug nanoparticle with an oppositely charged polyelectrolyte. Both cationic and anionic drugs form complexes with oppositely charged polyelectrolytes. Compared with other nanostructures, the yield of Nanoplex is greater and the complexation efficiency is better. Nanoplex are also easier to prepare. Nanoplex formulation is characterized through the production yield, complexation efficiency, drug loading, particle size and zeta potential using scanning electron microscopy, differential scanning calorimetry, X-ray diffraction and dialysis studies. Nanoplex have wide-ranging applications in different fields such as cancer therapy, gene drug delivery, drug delivery to the brain and protein and peptide drug delivery.</p>

scholarly journals Diethylstilbestrol Modifies the Structure of Model Membranes and Is Localized Close to the First Carbons of the Fatty Acyl Chains

Biomolecules ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 220
Author(s):  
Alessio Ausili ◽  
Inés Rodríguez-González ◽  
Alejandro Torrecillas ◽  
José A. Teruel ◽  
Juan C. Gómez-Fernández
Keyword(s):  
Membrane Surface ◽  
Water Layer ◽  
Fatty Acyl ◽  
31P Nmr Spectroscopy ◽  
Relaxation Rates ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Acyl Chains ◽  
Dynamics Simulations

The synthetic estrogen diethylstilbestrol (DES) is used to treat metastatic carcinomas and prostate cancer. We studied its interaction with membranes and its localization to understand its mechanism of action and side-effects. We used differential scanning calorimetry (DSC) showing that DES fluidized the membrane and has poor solubility in DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine) in the fluid state. Using small-angle X-ray diffraction (SAXD), it was observed that DES increased the thickness of the water layer between phospholipid membranes, indicating effects on the membrane surface. DSC, X-ray diffraction, and 31P-NMR spectroscopy were used to study the effect of DES on the Lα-to-HII phase transition, and it was observed that negative curvature of the membrane is promoted by DES, and this effect may be significant to understand its action on membrane enzymes. Using the 1H-NOESY-NMR-MAS technique, cross-relaxation rates for different protons of DES with POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) protons were calculated, suggesting that the most likely location of DES in the membrane is with the main axis parallel to the surface and close to the first carbons of the fatty acyl chains of POPC. Molecular dynamics simulations were in close agreements with the experimental results regarding the location of DES in phospholipids bilayers.

scholarly journals Effects of Sintering Temperature on Densification, Microstructure and Mechanical Properties of Al-Based Alloy by High-Velocity Compaction

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 218
Author(s):  
Xianjie Yuan ◽  
Xuanhui Qu ◽  
Haiqing Yin ◽  
Zaiqiang Feng ◽  
Mingqi Tang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Velocity ◽  
Sintered Density ◽  
Sintering Temperature ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Transmission Electron ◽  
High Velocity Compaction ◽  
Sintered Temperature

This present work investigates the effects of sintering temperature on densification, mechanical properties and microstructure of Al-based alloy pressed by high-velocity compaction. The green samples were heated under the flow of high pure (99.99 wt%) N2. The heating rate was 4 °C/min before 315 °C. For reducing the residual stress, the samples were isothermally held for one h. Then, the specimens were respectively heated at the rate of 10 °C/min to the temperature between 540 °C and 700 °C, held for one h, and then furnace-cooled to the room temperature. Results indicate that when the sintered temperature was 640 °C, both the sintered density and mechanical properties was optimum. Differential Scanning Calorimetry, X-ray diffraction of sintered samples, Scanning Electron Microscopy, Energy Dispersive Spectroscopy, and Transmission Electron Microscope were used to analyse the microstructure and phases.

Local atomic structure in tetragonal pure ZrO2nanopowders

2010 ◽  
Vol 43 (2) ◽  
pp. 227-236 ◽  
Author(s):  
Leandro M. Acuña ◽  
Diego G. Lamas ◽  
Rodolfo O. Fuentes ◽  
Ismael O. Fábregas ◽  
Márcia C. A. Fantini ◽  
...  
Keyword(s):  
Tetragonal Phase ◽  
Local Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Atomic Structures ◽  
Crystallite Sizes ◽  
Exafs Study ◽  
The Difference ◽  
X Ray Absorption ◽  
Good Agreement

The local atomic structures around the Zr atom of pure (undoped) ZrO2nanopowders with different average crystallite sizes, ranging from 7 to 40 nm, have been investigated. The nanopowders were synthesized by different wet-chemical routes, but all exhibit the high-temperature tetragonal phase stabilized at room temperature, as established by synchrotron radiation X-ray diffraction. The extended X-ray absorption fine structure (EXAFS) technique was applied to analyze the local structure around the Zr atoms. Several authors have studied this system using the EXAFS technique without obtaining a good agreement between crystallographic and EXAFS data. In this work, it is shown that the local structure of ZrO2nanopowders can be described by a model consisting of two oxygen subshells (4 + 4 atoms) with different Zr—O distances, in agreement with those independently determined by X-ray diffraction. However, the EXAFS study shows that the second oxygen subshell exhibits a Debye–Waller (DW) parameter much higher than that of the first oxygen subshell, a result that cannot be explained by the crystallographic model accepted for the tetragonal phase of zirconia-based materials. However, as proposed by other authors, the difference in the DW parameters between the two oxygen subshells around the Zr atoms can be explained by the existence of oxygen displacements perpendicular to thezdirection; these mainly affect the second oxygen subshell because of the directional character of the EXAFS DW parameter, in contradiction to the crystallographic value. It is also established that this model is similar to another model having three oxygen subshells, with a 4 + 2 + 2 distribution of atoms, with only one DW parameter for all oxygen subshells. Both models are in good agreement with the crystal structure determined by X-ray diffraction experiments.

Problems Associated with Kα Doublet in Residual Stress Measurements

1979 ◽  
Vol 23 ◽  
pp. 333-339
Author(s):  
S. K. Gupta ◽  
B. D. Cullity
Keyword(s):  
Residual Stress ◽  
Silicon Powder ◽  
Lattice Parameter ◽  
Diffraction Peak ◽  
Parameter Determination ◽  
X Ray Diffraction ◽  
X Ray ◽  
Analysis Techniques ◽  
The Difference ◽  
Similar Accuracy

Since the measurement of residual stress by X-ray diffraction techniques is dependent on the difference in angle of a diffraction peak maximum when the sample is examined consecutively with its surface at two different angles to the diffracting planes, it is important that these diffraction angles be obtained precisely, preferably with an accuracy of ± 0.01 deg. 2θ. Similar accuracy is desired in precise lattice parameter determination. In such measurements, it is imperative that the diffractometer be well-aligned. It is in the context of diffractometer alignment with the aid of a silicon powder standard free of residual stress that the diffraction peak analysis techniques described here have been developed, preparatory to residual stress determinations.

Sign in / Sign up

Export Citation Format

Share Document