scholarly journals The Influence of Yarn and Weave Structures on Acoustic Materials and the Effect of Different Acoustic Signal Incidence Angles on Woven Fabric Absorption Possibilities

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2814
Author(s):  
Bethalihem Teferi Samuel ◽  
Marcin Barburski ◽  
Jaroslaw R Blaszczak ◽  
Ewa Witczak ◽  
Katarzyna Abramczyk
Keyword(s):  
Sound Absorption ◽  
Structure Type ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Polyester Yarn ◽  
Absorption Properties ◽  
Internal Structures ◽  
Absorbing Material ◽  
Points Of View ◽  
The Impact

Utilizing textile-based acoustic materials can be considered basically from two points of view. First, it may be used as a sound absorbing material. Second, it may be used as a decoration that gives the surrounding area a new artistic appearance. To improve the acoustic possibilities of any woven fabric, it is necessary to study the influences of yarn characteristics and the internal structures of weave interlacement. To understand the impact of the yarn on the fabric, the samples were prepared using only polyester fiber as textured, twisted, and staple yarns. Regarding this experiment, the basic weave’s structure type, such as plain, rib, sateen, and twill, were used. Overall, 16 woven fabrics were prepared. The investigation was performed in the range of low to medium acoustic frequencies. The experiments were conducted in an anechoic chamber. Compared to other yarn types, fabrics formed from textured polyester yarn had higher sound absorption properties. Moreover, the observed results show that the different incidence angles of acoustic signals influence the measured sound absorption properties of a textile.

Sound absorbing properties of roller blind curtain fabrics

2016 ◽  
Vol 47 (1) ◽  
pp. 3-19 ◽  
Author(s):  
Oğuz Demiryürek ◽  
Hüsnü Aydemir
Keyword(s):  
Sound Absorption ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Sound Insulation ◽  
Effective Parameters ◽  
Absorption Properties ◽  
Regression Curves ◽  
Woven Structures ◽  
Absorbing Property ◽  
Coating Mixture

Roller blind fabrics are preferred and commonly used in home and office. In general, these fabrics are produced by coating the acrylic blended material, which is known by their ultraviolet properties, onto polyester woven fabrics. In this study, in order to characterize the sound insulation properties of roller blind fabrics, coating resin having different ratios of acrylic are applied onto different polyester woven structures. Sound absorption properties of these fabrics (front and back sides) are measured through dual microphone impedance tube and investigated by statistical analyses. Regression curves are obtained and optimum fabric properties on sound absorbing property have been suggested. As a result, acrylic content in coating material, fabric type, and viol structures occurred by coating process on the woven fabric are found as effective parameters on sound absorption properties of these fabrics. Increasing acrylic content in the resin up to 40% increases the sound absorbing value but further increasing this ratio yields sound reflection from the structure, in general. Optimum sound absorption and reflection values are provided with 40% acrylic rate in coating mixture.

Interplay of fabric structure and shear thickening fluid impregnation in moderating the impact response of high-performance woven fabrics

2020 ◽  
Vol 54 (28) ◽  
pp. 4387-4395
Author(s):  
Sanchi Arora ◽  
Abhijit Majumdar ◽  
Bhupendra Singh Butola
Keyword(s):  
Beneficial Effect ◽  
Energy Absorption ◽  
Impact Energy ◽  
High Performance ◽  
Research Work ◽  
Impact Resistance ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Fabric Structure ◽  
The Impact

The beneficial effect of STF impregnation in enhancing the impact resistance of high-performance fabrics has been extensively reported in the literature. However, this research work reports that fabric structure has a decisive role in moderating the effectiveness of STF impregnation in terms of impact energy absorption. Plain woven fabrics having sett varying from 25 × 25 inch−1 to 55 × 55 inch−1 were impregnated with STF at two different padding pressures to obtain different add-ons. The impact energy absorption by STF impregnated loosely woven fabrics was found to be higher than that of their neat counterparts for both levels of add-on, while opposite trend was observed in case of tightly woven fabrics. Further, comparison of tightly woven plain, 2/2 twill, 3/1 twill and 2 × 2 matt fabrics revealed beneficial effect of STF impregnation, except for the plain woven fabric, establishing that there exists a fabric structure-STF impregnation interplay that tunes the impact resistance of woven fabrics.

scholarly journals Effects of air gap, fibre type and blend ratio on sound absorption performance of needle-punched non-woven fabrics

2019 ◽  
Vol 14 ◽  
pp. 155892501984087
Author(s):  
Mlando Basel Mvubu ◽  
Rajesh Anandjiwala ◽  
Asis Patnaik
Keyword(s):  
Sound Absorption ◽  
Polyester Fibre ◽  
Natural Fibre ◽  
Woven Fabrics ◽  
Air Gap ◽  
Natural Fibres ◽  
Interactive Effects ◽  
Woven Fabric ◽  
Absorption Coefficients ◽  
Blend Ratio

This article reports a study on the effect of different natural fibres, their blend ratios and varying air gaps between a needle-punched non-woven fabric and polystyrene backing on the sound absorption coefficients of the needle-punched non-woven fabrics. These parameters as well as their interactive effects were studied by variance analysis. The air gap varied from 0 to 25 mm in 5 mm increments; three natural fibre types (agave, flax and waste wool) were used; each one blended with polyester fibres in three blending ratios. The univariate test of significance showed that all three parameters and two of the three two-way interactions effects on sound absorption coefficients were significant. Only two-way interaction effect between blend ratio and air gap on sound absorption coefficient was not significant. It was found that the sound absorption coefficients increased with an increase in air gap size up to 15 mm, after which they decreased slightly as the air gap was increased further to 25 mm. In addition, the non-woven fabrics produced from the blend of waste wool and polyester fibres achieved the highest sound absorption coefficients than those of the other two natural fibres, and generally, the sound absorption coefficients increased with the increase in polyester fibre content in each blend studied.

Multi-objective optimization of parametric combination of injected slub yarn for producing knitted and woven fabrics with least abrasive damage

2017 ◽  
Vol 21 (2) ◽  
pp. 111-133 ◽  
Author(s):  
Arunangshu Mukhopadhyay ◽  
Vinay Kumar Midha ◽  
Nemai Chandra Ray
Keyword(s):  
Structural Parameters ◽  
Research Work ◽  
Optimal Solution ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Content Type ◽  
Multi Objective ◽  
Score Analysis ◽  
The Impact ◽  
Slub Yarn

Purpose This study aims to optimize the parametric combination of injected slub yarn to achieve least abrasive damage on fabrics produced from it. Design/methodology/approach Single base injected slub yarn structural parameters, vis-à-vis slub length, slub thickness and slub frequency, were varied during preparation of yarn samples under this research work. A total of 17 yarn samples were produced according to the Box and Bhenken design of the experiment. Subsequently knitted and woven (using injected slub yarns in the weft only) fabric samples were prepared from these yarns. Yarn and fabric samples were abraded with standard instruments to see the impact of yarn structural parameters on abrasive damage of fabric in terms of fabric mass loss and appearance deterioration. From the test results, empirical models relating to slub parameters and fabric abrasion behavior were developed through a backward elimination regression approach. Subsequently, a set of optimal parametric combinations was derived with multi-objective evolutionary algorithms by using MATLAB software. This was followed by ranking all optimal solutions through technique for order preference by similarity to idle solution (TOPSIS) score analysis. Findings The injected slub yarn’s structural parameters have a strong influence on the abrasive damage of knitted and woven fabric. It is seen that the best suitable parametric combination of slub parameters for achieving the least abrasive damage is not the same for knitted and woven fabric. Practical implications The spinner can explore this concept to find out the best suitable parametric combination during pattern making of injected slub yarn through MATLAB solution followed by TOPSIS score analysis based on their priority of criteria level to ensure better abrasion behavior of fabric produced. Originality/value Optimization of parametric combination of injected slub yarns will help to ensure production of fabric with most resistance to abrasion for specific applications. The studies showed that the optimal solution for woven and knitted fabrics is different. The result indicates that in the case of knitted fabric, comparatively lesser slub thickness is found to be suitable for getting better fabric abrasion resistance, whereas in the case of woven fabric, comparatively higher slub thickness is found suitable for the same.

scholarly journals Influence of Sound-Absorbing Material Placement on Room Acoustical Parameters

Acoustics ◽  
2019 ◽  
Vol 1 (3) ◽  
pp. 644-660 ◽  
Author(s):  
Jose Cucharero ◽  
Tuomas Hänninen ◽  
Tapio Lokki
Keyword(s):  
Speech Intelligibility ◽  
Sound Absorption ◽  
Sound Field ◽  
Acoustical Parameters ◽  
Open Plan ◽  
Absorbing Material ◽  
The Impact

The reverberation of a room is often controlled by installing sound absorption panels to the ceiling and on the walls. The reduced reverberation is particularly important in classrooms to maximize the speech intelligibility and in open-plan offices to make spaces more pleasant. In this study, the impact of the placement of the absorption material in a room was measured in a reverberation room and in a mockup classroom. The results show that absorption material is less efficient if it is mounted to the corners or on the edges between the walls and ceiling, if the sound field is more or less diffuse. If the room modes dominate the sound field, the most efficient location for the sound-absorbing material was found at one of the surfaces causing the modes. The results help acoustical consultants to place the absorption material in optimal locations and, generally, minimize the amount of material and save costs.

Sound absorption property of PVA/PEO/GO nanofiber membrane and non-woven composite material

2019 ◽  
Vol 50 (4) ◽  
pp. 512-525
Author(s):  
Huan Liu ◽  
Baoqi Zuo
Keyword(s):  
Graphene Oxide ◽  
Polyvinyl Alcohol ◽  
Polyethylene Oxide ◽  
Sound Absorption ◽  
Woven Fabric ◽  
Nanofiber Membrane ◽  
Absorption Properties ◽  
Blend Films ◽  
Absorption Performance ◽  
Nanofiber Membranes

Blend films based on polyvinyl alcohol/polyethylene oxide (70/30 wt%) undoped and doped with different concentration of graphene oxide were prepared by spiral vane electrospinning. Characteristic properties of the blend films were investigated by using X-ray diffraction and scanning electron microscopy. The sound absorption performance of the compositions (nanofiber membranes and needle punched non-woven fabric) was tested by an impedance tube. The sound absorption performance of non-woven fabric has greatly improved after combining with thin nanofiber membranes. With addition of graphene oxide, the fibers were intertwined in a loop and form a network, the areal density and surface roughness of the nanofiber membrane are reduced. Composites containing polyvinyl alcohol/polyethylene oxide nanofiber membranes and composites containing polyvinyl alcohol/polyethylene oxide/graphene oxide nanofiber membranes exhibited different sound absorption properties in different frequency bands. When the fiber coefficient of variation was small, the average sound absorption coefficient of the composite material was high. However, composites containing both polyvinyl alcohol/polyethylene oxide and polyvinyl alcohol/polyethylene oxide/graphene oxide nanofiber membranes had similar sound absorption properties, and the average sound absorption coefficient was greater than that of polyvinyl alcohol/polyethylene oxide composites.

scholarly journals Influence of Water-Induced Degradation of Polytetrafluoroethylene (PTFE)-Coated Woven Fabrics Mechanical Properties

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 1
Author(s):  
Andrzej Ambroziak ◽  
Paweł Kłosowski
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Water Immersion ◽  
Tensile Tests ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Uniaxial Tensile ◽  
Influence Of Water ◽  
Proper Values ◽  
The Impact

The impact of water-induced degradation on the mechanical properties of the chosen two PTFE-coated, glass threads woven fabrics is investigated in this paper. The paper begins with a survey of literature concerning the investigation and determination of coated woven fabric properties. The authors carried out the uniaxial tensile tests with an application of flat and curved grips to establish the proper values of the ultimate tensile strength and the longitudinal stiffness of groups of specimens treated with different moisture conditions. Despite the water resistance of the main materials used for fabrics manufacturing, the change of the mechanical properties caused by the influence of water immersion has been noticed. The reduction in the tensile strength resulting under waterlogged is observed in the range from 5% to 16% depending on the type of investigated coated woven fabric and direction of weft or warp.

scholarly journals Investigation Of Sound Absorption Properties Of Bark Cloth Nonwoven Fabric And Composites

2015 ◽  
Vol 15 (3) ◽  
pp. 173-180 ◽  
Author(s):  
Samson Rwawiire ◽  
Blanka Tomkova ◽  
Eulalia Gliscinska ◽  
Izabella Krucinska ◽  
Marina Michalak ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Epoxy Polymer ◽  
Nonwoven Fabric ◽  
Natural Fibre ◽  
Woven Fabric ◽  
Absorption Properties ◽  
Fibre Network ◽  
Exploratory Investigation ◽  
Absorbing Materials ◽  
Fibre Morphology

AbstractThe quest for sound-absorbing materials that are not only environmentally friendly, but also sustainable is the foremost reason for natural fibre-acoustic materials. Bark cloth is a natural non-woven fabric that is largely produced from Ficus trees. An exploratory investigation of bark cloth a non-woven material and its reinforcement in epoxy polymer composites has been fabricated and investigated for the sound absorption properties so as to find the most suitable applications and also to see whether bark cloth can be used in some applications in place of man-made fibres. Three types of material species were investigated with their respective composites. The fibre morphology showed bark cloth to be a porous fabric that showed promising sound absorption properties at higher frequencies. The sound absorption results of four-layer material selections of Ficus natalensis, Ficus brachypoda and Antiaris toxicaria bark cloth showed sound absorption coefficient of 0.7; 0.71 and 0.91 at f > 6400 Hz, respectively. The bark cloth reinforced laminar epoxy composites had reduced sound absorption coefficients, which ranged from 0.1 to 0.35, which was attributed to decreased porosity and vibration in the bark cloth fibre network.

Modeling and simulation of impact behavior of 3D woven solid structure for ballistic application

2020 ◽  
pp. 152808372098046
Author(s):  
Lekhani Tripathi ◽  
Soumya Chowdhury ◽  
BK Behera
Keyword(s):  
Numerical Models ◽  
Woven Fabrics ◽  
Ballistic Impact ◽  
Woven Fabric ◽  
Low Velocity Impact ◽  
Impact Behavior ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact ◽  
Analytical Approaches

This study was carried out to understand and evaluate the response of 3 D woven fabrics upon the simulated ballistic forces. Under the low-velocity impact, analytical and numerical models were developed for determining the impact energy, which was used to evaluate the ballistic impact of projectile onto multiple-layered woven fabric panels based on the ballistic impact of single textile yarns. The behavior of primary and secondary yarns in a fabric under the ballistic impact was analyzed by both the models. The mechanisms of failure and energy dissipation of Kevlar fabric subjected to low-velocity impact were numerically investigated by using the ABAQUS platform as a tool of finite element method (FEM). The results obtained from numerical and analytical approaches were validated against experimental value which showed a good agreement.

Sign in / Sign up

Export Citation Format

Share Document