scholarly journals Mechanical Behavior of Plaster Composites Based on Rubber Particles from End-of-Life Tires Reinforced with Carbon Fibers

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3979
Author(s):  
Rafael Vicente Lozano-Díez ◽  
Óscar López-Zaldívar ◽  
Sofía Herrero-del-Cura ◽  
Pablo Luís Mayor-Lobo ◽  
Francisco Hernández-Olivares
Keyword(s):  
Mechanical Properties ◽  
End Of Life ◽  
Carbon Fibers ◽  
Dynamic Modulus ◽  
Mechanical Performance ◽  
Rubber Waste ◽  
Rubber Particles ◽  
Mechanical Tensile ◽  
Microstructure Of The Material ◽  
Moduli Of Elasticity

The principal objective of this research project is the disposal of end-of-life tire rubber waste and its incorporation in gypsum composites. As a continuation of previous projects, which established a reduction in the mechanical properties of the resulting products, the behavior of these composites is analyzed with the incorporation of carbon fibers. The density, Shore C hardness, flexural strength, compressive strength, dynamic modulus of elasticity, strength–strain curves, toughness and resistance values and microstructure of the material are studied and compared. The results obtained show a significant increase in the mechanical tensile strength of all of the samples containing fibers. The moduli of elasticity results show a decrease in rigidity and increase in toughness and resistance of the material produced by incorporating the fibers. An optimum dosage of a water/gypsum ratio of 0.6 and incorporation of 1.5% carbon fibers is proposed. This lightweight material, which offers a high mechanical performance, features characteristics which are suitable for large prefabricated building elements in the form of panels or boards.

Enhancement of the Mechanical Properties of PEBAX Graphene Nanocomposite Using Supercritical Fluid Assisted Extrusion Polymer Processing Technique

2017 ◽  
Vol 883 ◽  
pp. 75-84 ◽  
Author(s):  
Nireeksha Karode ◽  
Laurence Fitzhenry ◽  
Siobhán Matthews ◽  
Philip Walsh ◽  
Austin Coffey
Keyword(s):  
Mechanical Properties ◽  
Carbon Dioxide ◽  
Supercritical Carbon Dioxide ◽  
Mechanical Performance ◽  
Mechanical Analysis ◽  
Polymer Processing ◽  
Processing Technique ◽  
Graphene Nanocomposites ◽  
Mechanical Tensile ◽  
Supercritical Carbon

Medical tubing used in minimally invasive devices presents a number of design considerations depending on the material used, design requirements (such as sufficient stiffness, flexibility and biocompatibility) and processing conditions. Currently, manufacturing industries adopt co-extrusion systems to meet design specifications, by using multilayer configuration leading to higher cost per device and increased complexity. This paper investigates the mechanical performance of nanocomposites using supercritical carbon dioxide assisted polymer processing technique. The use of innovative medical compounds such as PEBAX graphene nanocomposites have resulted in measurable improvements in mechanical properties. This study also presents the effect of supercritical carbon dioxide on the mechanical and physical properties of the polymer matrix. The mechanical properties have been investigated using dynamic mechanical analysis (DMA) and mechanical tensile test, where sufficient reinforcement was observed depending on the composition of graphene within PEBAX matrix. ATR-FTIR was used to further analyze the effect of supercritical carbon dioxide and interactions within the polymer composite matrix.

scholarly journals Proposal to Reuse Rubber Waste from End-Of-Life Tires Using Thermosetting Resin

2019 ◽  
Vol 11 (24) ◽  
pp. 6997 ◽  
Author(s):  
Andre Hekermann Buss ◽  
João Luiz Kovaleski ◽  
Regina Negri Pagani ◽  
Vander Luiz da Silva ◽  
Jaqueline de Matos Silva
Keyword(s):  
End Of Life ◽  
Experimental Work ◽  
Chemical Elements ◽  
Motor Vehicles ◽  
Tire Rubber ◽  
Practical Applications ◽  
Resin Catalyst ◽  
Rubber Waste ◽  
Rubber Particles ◽  
Work Samples

Due to the increasing production of motor vehicles, a large amount of waste with different characteristics and compositions is generated, notably end-of-life tires, which are harmful to the environment when not properly disposed. Their composition contains contaminating chemical elements, resulting in negative impacts on the environment. This research aims to present a process that favors the recycling of rubber waste from end-of-life tires. For the construction of the state of the art and state of the technique, a review of the literature on end-of-life tire rubber, and a search on Google Patents and Espacenet was done using Methodi Ordinatio. For the experimental work, samples were made using concentrations of 20%, 40%, and 60% of end-of-life tire rubber particles, with the addition of thermoset polymeric matrix of isophthalic polyester resin, catalyst, and dyes. In order to evaluate the quality of the mixture, some tests with the material resulting from the mixture were performed: Izod impact strength, Shore D hardness, immersion density determination, flexural strength, and scanning electron microscopy analysis. The results from the tests indicate that the composition with 60% of rubber particles had better mechanical results than samples containing 20% and 40%. The tests also show that end-of-life tire particles promote chemical adsorption (interaction) with the thermoset polymer matrix, favoring the mechanical properties. The final results of this research are: the literature review and the search on granted patents showed that this study is original; the experimental work suggests that practical applications are possible, generating a new product, harder with a proportion of 60% of rubber particles, as indicated by the tests, with a smooth surface that does not require polishing. Thus, this research is characterized as innovative as well as having sustainable characteristics.

scholarly journals Short beam strength and flexural behavior of GFRP laminates embedded with short carbon fibers having notch

2018 ◽  
Vol 2 (3) ◽  
Author(s):  
Prashant Rawat 1 ◽  
K. K. Singh 2 ◽  
B. N. Tripathi 1
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibers ◽  
Mechanical Performance ◽  
Testing Machine ◽  
Flexural Behavior ◽  
Atmospheric Conditions ◽  
In Doping ◽  
Short Beam ◽  
Specific Position ◽  
Short Carbon

This paper examines the mechanical performance of eight-layered GFRP laminate embedded with short carbon fibers (SCF). Eight layered GFRP samples are prepared using press molding machine at 40 KN pressure. Notched samples (1 mm deep) at specific position from the center are tested, the doping of SCF is done to evaluate the improvement in mechanical properties using reinforcement at three different proportions 0, 1, 2 and 5 wt.%. The GFRP samples are prepared as per ASTM D2344 and ASTM D7264 for short beam strength (SBS) and flexural and respectively. Samples are tested using Hounsfield HK-50 universal testing machine (UTM) with 50KN capacity at room atmospheric conditions. Results of the experimental analysis justified that the improvement in mechanical properties with increase in doping percentage of SCF while at highest doping value i.e. 5 wt.% mechanical properties reduced.

Using Recycled Rubber Particles as Filler of Polymers

2014 ◽  
Vol 616 ◽  
pp. 260-267 ◽  
Author(s):  
Petr Valášek ◽  
Miroslav Müller ◽  
Juraj Ružbarský
Keyword(s):  
Mechanical Properties ◽  
Polymeric Materials ◽  
Epoxy Adhesive ◽  
Rubber Waste ◽  
Waste Rubber ◽  
Rubber Particles ◽  
Recycled Rubber ◽  
Material Utilization

One of a way of a material utilization of a rubber waste originated at a recyclation of tyres is its inclusion into polymeric materials. The paper describes chosen mechanical properties of an epoxy adhesive and polyurethane filled with the waste rubber. The waste rubber was gained as one of outputs of a recycling line of a firm Gumoeko, Ltd. The filler presence influences resultant mechanical properties and decreases a price of gained materials. Defining of mechanical properties enables to specify possible application areas.

Influence of graphitization conditions on structural and mechanical properties of polyacrylonitrile-based carbon fibers

2018 ◽  
pp. 46-59
Author(s):  
V. M. Samoilov ◽  
◽  
D. B. Verbets ◽  
I. A. Bubnenkov ◽  
N. N. Steparyova ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibers

Weldability - Behavior of Welded Reinforcement

2019 ◽  
Vol 70 (10) ◽  
pp. 3469-3472
Keyword(s):  
Mechanical Properties ◽  
Chemical Composition ◽  
Mechanical Characteristics ◽  
Mechanical Performance ◽  
Current Work ◽  
Carbon Equivalent ◽  
Work Process ◽  
Ultimate Limit

Weldability involves two aspects: welding behavior of components and safety in operation. The two aspects will be reduced to the mechanical characteristics of the elements and to the chemical composition. In the case of steel reinforcing rebar’s, it is reduces to the percentage of Cech(carbon equivalent) and to the mechanical characteristics: the yielding limit, the ultimate limit, and the elongations which after that represent the ductility class in which the re-bars is framed. The paper will present some types of steel reinforcing rebar’s with its mechanical characteristics and the welding behavior of those elements. In the current work, process-related behavior of welded reinforcement, joint local and global mechanical properties, and their correlation with behavior of normal reinforcement and also the mechanical performance resulted in this type of joints. Keywords: welding behavior, ultimate limit, reinforcing rebar’s

scholarly journals Preparation of Long Sisal Fiber-Reinforced Polylactic Acid Biocomposites with Highly Improved Mechanical Performance

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1124
Author(s):  
Zhifang Liang ◽  
Hongwu Wu ◽  
Ruipu Liu ◽  
Caiquan Wu
Keyword(s):  
Mechanical Properties ◽  
Polylactic Acid ◽  
Mechanical Performance ◽  
Tensile Elongation ◽  
Sisal Fiber ◽  
Fiber Reinforced ◽  
Impact Performance ◽  
The Matrix ◽  
Blending Process ◽  
Extension Direction

Green biodegradable plastics have come into focus as an alternative to restricted plastic products. In this paper, continuous long sisal fiber (SF)/polylactic acid (PLA) premixes were prepared by an extrusion-rolling blending process, and then unidirectional continuous long sisal fiber-reinforced PLA composites (LSFCs) were prepared by compression molding to explore the effect of long fiber on the mechanical properties of sisal fiber-reinforced composites. As a comparison, random short sisal fiber-reinforced PLA composites (SSFCs) were prepared by open milling and molding. The experimental results show that continuous long sisal fiber/PLA premixes could be successfully obtained from this pre-blending process. It was found that the presence of long sisal fibers could greatly improve the tensile strength of LSFC material along the fiber extension direction and slightly increase its tensile elongation. Continuous long fibers in LSFCs could greatly participate in supporting the load applied to the composite material. However, when comparing the mechanical properties of the two composite materials, the poor compatibility between the fiber and the matrix made fiber’s reinforcement effect not well reflected in SSFCs. Similarly, the flexural performance and impact performance of LSFCs had been improved considerably versus SSFCs.

scholarly journals Tribological and Mechanical Properties of Multicomponent CrVTiNbZr(N) Coatings

Coatings ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 41
Author(s):  
Yin-Yu Chang ◽  
Cheng-Hsi Chung
Keyword(s):  
Mechanical Properties ◽  
Nitrogen Content ◽  
Adhesion Strength ◽  
Mechanical Performance ◽  
Bulk Material ◽  
High Entropy Alloy ◽  
Composition Gradient ◽  
Multilayered Structures ◽  
High Entropy ◽  
Alloy Target

Multi-element material coating systems have received much attention for improving the mechanical performance in industry. However, they are still focused on ternary systems and seldom beyond quaternary ones. High entropy alloy (HEA) bulk material and thin films are systems that are each comprised of at least five principal metal elements in equally matched proportions, and some of them are found possessing much higher strength than traditional alloys. In this study, CrVTiNbZr high entropy alloy and nitrogen contained CrVTiNbZr(N) nitride coatings were synthesized using high ionization cathodic-arc deposition. A chromium-vanadium alloy target, a titanium-niobium alloy target and a pure zirconium target were used for the deposition. By controlling the nitrogen content and cathode current, the CrNbTiVZr(N) coating with gradient or multilayered composition control possessed different microstructures and mechanical properties. The effect of the nitrogen content on the chemical composition, microstructure and mechanical properties of the CrVTiNbZr(N) coatings was investigated. Compact columnar microstructure was obtained for the synthesized CrVTiNbZr(N) coatings. The CrVTiNbZrN coating (HEAN-N165), which was deposited with nitrogen flow rate of 165 standard cubic centimeters per minute (sccm), exhibited slightly blurred columnar and multilayered structures containing CrVN, TiNbN and ZrN. The design of multilayered CrVTiNbZrN coatings showed good adhesion strength. Improvement of adhesion strength was obtained with composition-gradient interlayers. The CrVTiNbZrN coating with nitrogen content higher than 50 at.% possessed the highest hardness (25.2 GPa) and the resistance to plastic deformation H3/E*2 (0.2 GPa) value, and therefore the lowest wear rate was obtained because of high abrasion wear resistance.

Experimental investigation of the mechanical behavior of glass fiber/high fluidity polyamide-based composites for automotive market

2021 ◽  
pp. 073168442110140
Author(s):  
Hossein Ramezani-Dana ◽  
Moussa Gomina ◽  
Joël Bréard ◽  
Gilles Orange
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Mechanical Performance ◽  
Physical And Mechanical Properties ◽  
Ultimate Strain ◽  
Uniaxial Tensile ◽  
Compression Tests ◽  
Automotive Market ◽  
Glass Fiber Reinforced ◽  
Glass Fiber Reinforcement

In this work, we examine the relationships between the microstructure and the mechanical properties of glass fiber–reinforced polyamide 6,6 composite materials ( V f = 54%). These materials made by thermocompression incorporate different grades of high fluidity polyamide-based polymers and two types of quasi-UD glass fiber reinforcement. One is a classic commercial fabric, while the other specially designed and manufactured incorporates weaker tex glass yarns (the spacer) to increase the planar permeability of the preform. The effects of the viscosity of the polymers and their composition on the wettability of the reinforcements were analyzed by scanning electron microscopy observations of the microstructure. The respective influences of the polymers and the spacer on the mechanical performance were determined by uniaxial tensile and compression tests in the directions parallel and transverse to the warp yarns. Not only does the spacer enhance permeability but it also improves physical and mechanical properties: tensile longitudinal Young’s modulus increased from 38.2 GPa to 42.9 GPa (13% growth), tensile strength increased from 618.9 MPa to 697 MPa (3% growth), and decrease in ultimate strain from 1.8% to 1.7% (5% reduction). The correlation of these results with the damage observed post mortem confirms those acquired from analyses of the microstructure of composites and the rheological behaviors of polymers.

Sign in / Sign up

Export Citation Format

Share Document