scholarly journals Modeling Superconducting Critical Temperature of 122-Iron-Based Pnictide Intermetallic Superconductor Using a Hybrid Intelligent Computational Method

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4604
Author(s):  
Oluwatobi Akomolafe ◽  
Taoreed O. Owolabi ◽  
Mohd Amiruddin Abd Rahman ◽  
Mohd Mustafa Awang Kechik ◽  
Mohd Najib Mohd Yasin ◽  
...  
Keyword(s):  
Critical Temperature ◽  
Structural Transformation ◽  
Mean Absolute Error ◽  
Low Cost ◽  
Absolute Error ◽  
Computational Method ◽  
Hole Doping ◽  
Support Vector ◽  
Ionic Radii ◽  
Iron Based

Structural transformation and magnetic ordering interplays for emergence as well as suppression of superconductivity in 122-iron-based superconducting materials. Electron and hole doping play a vital role in structural transition and magnetism suppression and ultimately enhance the room pressure superconducting critical temperature of the compound. This work models the superconducting critical temperature of 122-iron-based superconductor using tetragonal to orthorhombic lattice (LAT) structural transformation during low-temperature cooling and ionic radii of the dopants as descriptors through hybridization of support vector regression (SVR) intelligent algorithm with particle swarm (PS) parameter optimization method. The developed PS-SVR-RAD model, which utilizes ionic radii (RAD) and the concentrations of dopants as descriptors, shows better performance over the developed PS-SVR-LAT model that employs lattice parameters emanated from structural transformation as descriptors. Using the root mean square error (RMSE), coefficient of correlation (CC) and mean absolute error as performance measuring criteria, the developed PS-SVR-RAD model performs better than the PS-SVR-LAT model with performance improvement of 15.28, 7.62 and 72.12%, on the basis of RMSE, CC and Mean Absolute Error (MAE), respectively. Among the merits of the developed PS-SVR-RAD model over the PS-SVR-LAT model is the possibility of electrons and holes doping from four different dopants, better performance and ease of model development at relatively low cost since the descriptors are easily fetched ionic radii. The developed intelligent models in this work would definitely facilitate quick and precise determination of critical transition temperature of 122-iron-based superconductor for desired applications at low cost with experimental stress circumvention.

scholarly journals m5CPred-SVM:  A Novel Method for Predicting m5C Sites of RNA

2020 ◽  
Author(s):  
Xiao Chen ◽  
Yi Xiong ◽  
Yinbo Liu ◽  
Yuqing Chen ◽  
Shoudong Bi ◽  
...  
Keyword(s):  
Cell Fate ◽  
Prediction Accuracy ◽  
Cytosine Methylation ◽  
Low Cost ◽  
Computational Method ◽  
Selection Strategy ◽  
Support Vector ◽  
Feature Subset ◽  
Biological Functions ◽  
Accurate Identification

Abstract Background: As one of the most common post-transcriptional modifications (PTCM) in RNA, 5-cytosine-methylation plays important roles in many biological functions such as RNA metabolism and cell fate decision. Through accurate identification of 5-methylcytosine (m5C) sites on RNA, researchers can better understand the exact role of 5-cytosine-methylation in these biological functions. In recent years, computational methods of predicting m5C sites have attracted lots of interests because of its efficiency and low-cost. However, both the accuracy and efficiency of these methods are not satisfactory yet and need further improvement. Results: In this work, we have developed a new computational method, m5CPred-SVM, to identify m5C sites in three species, H. sapiens, M. musculus and A. thaliana. To build this model, we first collected benchmark datasets following three recently published methods. Then, six types of sequence-based features were generated based on RNA segments and the sequential forward feature selection strategy was used to obtain the optimal feature subset. After that, the performance of models based on different learning algorithms were compared, and the model based on the support vector machine provided the highest prediction accuracy. Finally, our proposed method, m5CPred-SVM was compared with several existing methods, and the result showed that m5CPred-SVM offered substantially higher prediction accuracy than previously published methods. It is expected that our method, m5CPred-SVM, can become a useful tool for accurate identification of m5C sites.Conclusion: In this study, by introducing position-specific propensity related features, we built a new model, m5CPred-SVM, to predict RNA m5C sites of three different species. The result shows that our model outperformed the existing state-of-art models. Our model is available for users through a web server at http://zhulab.ahu.edu.cn/m5CPred-SVM.

scholarly journals A Methodology for Predicting Aggregate Flight Departure Delays in Airports Based on Supervised Learning

2020 ◽  
Vol 12 (7) ◽  
pp. 2749 ◽  
Author(s):  
Bojia Ye ◽  
Bo Liu ◽  
Yong Tian ◽  
Lili Wan
Keyword(s):  
Supervised Learning ◽  
Mean Absolute Error ◽  
Absolute Error ◽  
Support Vector ◽  
Accuracy Rate ◽  
Forecast Horizon ◽  
Learning Methods ◽  
Extremely Randomized Trees ◽  
Proposed Model ◽  
Operational Data

This paper proposes a new methodology for predicting aggregate flight departure delays in airports by exploring supervised learning methods. Individual flight data and meteorological information were processed to obtain four types of airport-related aggregate characteristics for prediction modeling. The expected departure delays in airports is selected as the prediction target while four popular supervised learning methods: multiple linear regression, a support vector machine, extremely randomized trees and LightGBM are investigated to improve the predictability and accuracy of the model. The proposed model is trained and validated using operational data from March 2017 to February 2018 for the Nanjing Lukou International Airport in China. The results show that for a 1-h forecast horizon, the LightGBM model provides the best result, giving a 0.8655 accuracy rate with a 6.65 min mean absolute error, which is 1.83 min less than results from previous research. The importance of aggregate characteristics and example validation are also studied.

A COMPARITIVE ANALYSIS AND TIME SERIES FORECASTING OF MONTHLY STREAM FLOW DATA USING HYBRID MODEL

2015 ◽  
Vol 76 (13) ◽  
Author(s):  
Siraj Muhammed Pandhiani ◽  
Ani Shabri
Keyword(s):  
Hybrid Model ◽  
Stream Flow ◽  
Mean Absolute Error ◽  
Absolute Error ◽  
Least Square ◽  
Support Vector ◽  
Discrete Wavelet ◽  
Flow Data ◽  
Indus River ◽  
Proposed Model

In this study, new hybrid model is developed by integrating two models, the discrete wavelet transform and least square support vector machine (WLSSVM) model. The hybrid model is then used to measure for monthly stream flow forecasting for two major rivers in Pakistan. The monthly stream flow forecasting results are obtained by applying this model individually to forecast the rivers flow data of the Indus River and Neelum Rivers. The root mean square error (RMSE), mean absolute error (MAE) and the correlation (R) statistics are used for evaluating the accuracy of the WLSSVM, the proposed model. The results are compared with the results obtained through LSSVM. The outcome of such comparison shows that WLSSVM model is more accurate and efficient than LSSVM.

scholarly journals m5CPred-SVM:  A Novel Method for Predicting m5C Sites of RNA

2020 ◽  
Author(s):  
Xiao Chen ◽  
Yi Xiong ◽  
Yinbo Liu ◽  
Yuqing Chen ◽  
Shoudong Bi ◽  
...  
Keyword(s):  
Cell Fate ◽  
Prediction Accuracy ◽  
Cytosine Methylation ◽  
Low Cost ◽  
Computational Method ◽  
Selection Strategy ◽  
Support Vector ◽  
Feature Subset ◽  
Biological Functions ◽  
Accurate Identification

Abstract Background: As one of the most common post-transcriptional modifications (PTCM) in RNA, 5-cytosine-methylation plays important roles in many biological functions such as RNA metabolism and cell fate decision. Through accurate identification of 5-methylcytosine (m5C) sites on RNA, researchers can better understand the exact role of 5-cytosine-methylation in these biological functions. In recent years, computational methods of predicting m5C sites have attracted lots of interests because of its efficiency and low-cost. However, both the accuracy and efficiency of these methods are not satisfactory yet and need further improvement. Results: In this work, we have developed a new computational method, m5CPred-SVM, to identify m5C sites in three species, H. sapiens, M. musculus and A. thaliana. To build this model, we first collected benchmark datasets following three recently published methods. Then, six types of sequence-based features were generated based on RNA segments and the sequential forward feature selection strategy was used to obtain the optimal feature subset. After that, the performance of models based on different learning algorithms were compared, and the model based on the support vector machine provided the highest prediction accuracy. Finally, our proposed method, m5CPred-SVM was compared with several existing methods, and the result showed that m5CPred-SVM offered substantially higher prediction accuracy than previously published methods. It is expected that our method, m5CPred-SVM, can become a useful tool for accurate identification of m5C sites.Conclusion: In this study, by introducing position-specific propensity related features, we built a new model, m5CPred-SVM, to predict RNA m5C sites of three different species. The result shows that our model outperformed the existing state-of-art models. Our model is available for users through a web server at http://zhulab.ahu.edu.cn/m5CPred-SVM.

scholarly journals A Novel Method for Estimating Throwing Speed in Handball using a Wearable Device

2020 ◽  
Author(s):  
Sebastian D Skejø ◽  
Jesper Bencke ◽  
Merete Møller ◽  
Henrik Sørensen
Keyword(s):  
Cross Validation ◽  
Prediction Models ◽  
Mean Absolute Error ◽  
Low Cost ◽  
Absolute Error ◽  
Shoulder Injuries ◽  
Specific Load ◽  
Cheap Method ◽  
Novel Method ◽  
3D Motion Capture

Understanding the shoulder-specific load in handball is important for both prevention and rehabilitation of shoulder injuries. The shoulder-specific load is largely a result of the number and speed of throws. However, it is difficult to quantify number and speed of throws in handball due to limitations in the current technology. Therefore, the purpose of this study was to develop a novel method to estimate throwing speed in handball using a low-cost accelerometer-based device. Nineteen experienced handball players each performed 25 throws of varying types while we measured the acceleration of the wrist using the accelerometer and the throwing speed using 3D motion capture. Using cross-validation, we developed four prediction models using combinations of the logarithm of the peak total acceleration, sex and throwing type as the predictor and the throwing speed as the outcome. We found that all models were well-calibrated (mean calibration of all models: 0.0 m/s, calibration slope range: 0.99-1.00) and precise (R2 = 0.71-0.85, mean absolute error = 1.32-1.82 m/s). We conclude that the developed method appear to provide practitioners and researchers with a feasible and cheap method to estimate throwing speeds in handball.

scholarly journals Earthquake Time Prediction using CatBoost and SVR

2019 ◽  
Vol 9 (1) ◽  
pp. 225-229
Keyword(s):  
Support Vector Machine ◽  
Cross Validation ◽  
Mean Absolute Error ◽  
Absolute Error ◽  
Acoustic Signals ◽  
High Accuracy ◽  
Support Vector ◽  
Time Prediction ◽  
Vector Machines ◽  
Time Of Failure

Seismic tremors everywhere throughout the globe have been a noteworthy reason for decimation and death toll and property. The following context expects to recognize earthquakes at a beginning time utilizing AI. This will help individuals and salvage groups to make their errand simpler. The information in this manner comprises of these seismic acoustic signals and the time of failure. The model is then prepared utilizing the CatBoost model and the utilization of Support Vector Machines. This will help foresee the time at which a Seismic tremor may happen. CatBoost Regression Algorithm gives a Mean Absolute Error of about 1.860. The Cross Validation (CV) Score for the Support Vector Machine (SVM) approach is -2.1651. The datasets metrics are not reliable on any outer parameter in this manner the variety of exactness is constrained, and high accuracy is accomplished.

scholarly journals ASSESSMENT OF RAINFALL-RUNOFF SIMULATION MODEL BASED ON SATELLITE ALGORITHM

2015 ◽  
Vol XL-1-W5 ◽  
pp. 529-541
Author(s):  
A. R. Nemati ◽  
M. Zakeri Niri ◽  
S. Moazami
Keyword(s):  
Conceptual Model ◽  
Mean Absolute Error ◽  
Absolute Error ◽  
Data Driven ◽  
Support Vector ◽  
Rainfall Runoff ◽  
Runoff Simulation ◽  
Research Fields ◽  
Hydrology And Water Resources ◽  
Trmm 3B42

Simulation of rainfall-runoff process is one of the most important research fields in hydrology and water resources. Generally, the models used in this section are divided into two conceptual and data-driven categories. In this study, a conceptual model and two data-driven models have been used to simulate rainfall-runoff process in Tamer sub-catchment located in Gorganroud watershed in Iran. The conceptual model used is HEC-HMS, and data-driven models are neural network model of multi-layer Perceptron (MLP) and support vector regression (SVR). In addition to simulation of rainfall-runoff process using the recorded land precipitation, the performance of four satellite algorithms of precipitation, that is, CMORPH, PERSIANN, TRMM 3B42 and TRMM 3B42RT were studied. In simulation of rainfall-runoff process, calibration and accuracy of the models were done based on satellite data. The results of the research based on three criteria of correlation coefficient (R), root mean square error (RMSE) and mean absolute error (MAE) showed that in this part the two models of SVR and MLP could perform the simulation of runoff in a relatively appropriate way, but in simulation of the maximum values of the flow, the error of models increased.

scholarly journals Evaluation and Application of a Novel Low-Cost Wearable Sensing Device in Assessing Real-Time PM2.5 Exposure in Major Asian Transportation Modes

Atmosphere ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 270
Author(s):  
Wen-Cheng Vincent Wang ◽  
Shih-Chun Candice Lung ◽  
Chun-Hu Liu ◽  
Tzu-Yao Julia Wen ◽  
Shu-Chuan Hu ◽  
...  
Keyword(s):  
Particulate Matter ◽  
Real Time ◽  
Mean Absolute Error ◽  
Low Cost ◽  
Absolute Error ◽  
Laboratory Evaluation ◽  
Sensing System ◽  
Transportation Modes ◽  
Pm2.5 Exposure ◽  
Device Location

Small low-cost sensing (LCS) devices enable assessment of close-to-reality PM2.5 exposures, though their data quality remains a challenge. This work evaluates the precision, accuracy, wearability and stability of a wearable particle LCS device, Location-Aware Sensing System (LASS, with Plantower PMS3003), which is 104 × 66 × 46 mm3 in size and less than 162 g in weight. Real-time particulate matter (PM) exposures in six major Asian transportation modes were assessed. Side-by-side laboratory evaluation of PM2.5 between a GRIMM aerosol spectrometer and sensors yielded a correlation of 0.98 and a mean absolute error of 0.85 µg/m3. LASS readings collected in the summer of 2016 in Taiwan were converted to GRIMM-comparable values. Mean PM2.5 concentrations obtained from GRIMM and converted LASS values of the six different transportation microenvironments were 16.9 ± 11.7 (n = 1774) and 17.0 ± 9.5 (n = 3399) µg/m3, respectively, showing a correlation of 0.93. The average one-hour PM2.5 exposure increments (concentration increase above ambient levels) from converted LASS values for Mass Rapid Transit (MRT), bus, car, scooter, bike and walk were 15.6, 6.7, −19.2, 8.1, 6.1 and 7.1 µg/m3, respectively, very close to those obtained from GRIMM. This work is one of the earliest studies applying wearable particulate matter (PM) LCS devices in exposure assessment in different transportation modes.

scholarly journals Previsão de casos de dengue através de Machine Learning e Deep Learning: uma revisão sistemática

2021 ◽  
Vol 10 (11) ◽  
pp. e33101119347
Author(s):  
Ewethon Dyego de Araujo Batista ◽  
Wellington Candeia de Araújo ◽  
Romeryto Vieira Lira ◽  
Laryssa Izabel de Araujo Batista
Keyword(s):  
Machine Learning ◽  
Deep Learning ◽  
Short Term Memory ◽  
Mean Absolute Error ◽  
Absolute Error ◽  
Support Vector ◽  
Short Term ◽  
Term Memory ◽  
Long Short Term Memory ◽  
De Medicina

Introdução: a dengue é uma arbovirose causada pelo vírus DENV e transmitida para o homem através do mosquito Aedes aegypti. Atualmente, não existe uma vacina eficaz para combater todas as sorologias do vírus. Diante disso, o combate à doença se volta para medidas preventivas contra a proliferação do mosquito. Os pesquisadores estão utilizando Machine Learning (ML) e Deep Learning (DL) como ferramentas para prever casos de dengue e ajudar os governantes nesse combate. Objetivo: identificar quais técnicas e abordagens de ML e de DL estão sendo utilizadas na previsão de dengue. Métodos: revisão sistemática realizada nas bases das áreas de Medicina e de Computação com intuito de responder as perguntas de pesquisa: é possível realizar previsões de casos de dengue através de técnicas de ML e de DL, quais técnicas são utilizadas, onde os estudos estão sendo realizados, como e quais dados estão sendo utilizados? Resultados: após realizar as buscas, aplicar os critérios de inclusão, exclusão e leitura aprofundada, 14 artigos foram aprovados. As técnicas Random Forest (RF), Support Vector Regression (SVR), e Long Short-Term Memory (LSTM) estão presentes em 85% dos trabalhos. Em relação aos dados, na maioria, foram utilizados 10 anos de dados históricos da doença e informações climáticas. Por fim, a técnica Root Mean Absolute Error (RMSE) foi a preferida para mensurar o erro. Conclusão: a revisão evidenciou a viabilidade da utilização de técnicas de ML e de DL para a previsão de casos de dengue, com baixa taxa de erro e validada através de técnicas estatísticas.

scholarly journals Predicting Daily Returns of Global Stocks Indices: Neural Networks vs Support Vector Machines

2019 ◽  
pp. 1-13 ◽  
Author(s):  
Jasleen Kaur ◽  
Khushdeep Dharni
Keyword(s):  
Data Mining ◽  
Neural Networks ◽  
Support Vector Machines ◽  
Mean Square Error ◽  
Mean Absolute Error ◽  
Absolute Error ◽  
Support Vector ◽  
Mean Square ◽  
Data Mining Techniques ◽  
Vector Machines

Uniqueness in economies and stock markets has given rise to an interesting domain of exploring data mining techniques across global indices. Previously, very few studies have attempted to compare the performance of data mining techniques in diverse markets. The current study adds to the understanding regarding the variations in performance of data mining techniques across the global stock indices. We compared the performance of Neural Networks and Support Vector Machines using accuracy measures Mean Absolute Error (MAE) and R­­­­oot Mean Square Error (RMSE) across seven major stock markets. For prediction purpose, technical analysis has been employed on selected indicators based on daily values of indices spanning a period of 12 years. We created 196 data sets spanning different time periods for model building such as 1 year, 2 years, 3 years, 4 years, 6 years and 12 years for selected seven stock indices. Based on prediction models built using Neural Networks and Support Vector Machines, the findings of the study indicate there is a significant difference, both for MAE and RMSE, across the selected global indices. Also, Mean Absolute Error and Root Mean Square Error of models built using NN were greater than Mean Absolute Error and Root Mean Square Error of models built using SVM.

Sign in / Sign up

Export Citation Format

Share Document