scholarly journals The Effect of Circulating Fluidised Bed Bottom Ash Content on the Mechanical Properties and Drying Shrinkage of Cement-Stabilised Soil

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 14
Author(s):  
Yuanlong Wang ◽  
Yongqi Zhao ◽  
Yunshan Han ◽  
Min Zhou
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Bottom Ash ◽  
Drying Shrinkage ◽  
Fluidised Bed ◽  
Soil Mixing ◽  
Underlying Mechanisms ◽  
Cementing Material ◽  
Circulating Fluidised Bed

This study aimed to determine the effect of circulating fluidised bed bottom ash (CFB-BA) content on the mechanical properties and drying shrinkage of cement-stabilised soil. Experiments were performed to study the changes in unconfined compressive strength and expansibility of cement-stabilised soil with different CFB-BA contents and the underlying mechanisms based on microscopic properties. The results show that CFB-BA can effectively increase the unconfined compressive strength of the specimen and reduce the amount of cement in the soil. When the combined content of CFB-BA and cement in the soil was 30%, the unconfined compressive strength of the specimen with C/CFB = 2 after 60 days of curing was 10.138 MPa, which is 1.4 times that of the pure cement specimen. However, the CFB-BA does not significantly improve the strength of the soil and cannot be added alone as a cementing material to the soil. Additionally, swelling tests showed that the addition of CFB-BA to cement-stabilised soil can significantly reduce the drying shrinkage. This research project provides reference values for the application of CFB-BA in cement–soil mixing piles, including compressive strength and the reduction in the shrinkage deformation of specimens.

Microstructure and Mechanical Properties of Ambiently-Cured Blended Coal Ash-Based Geopolymer Concrete

2016 ◽  
Vol 857 ◽  
pp. 400-404
Author(s):  
Tian Yu Xie ◽  
Togay Ozbakkaloglu
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Compressive Strength ◽  
Fly Ash ◽  
Bottom Ash ◽  
Coal Ash ◽  
Geopolymer Concrete ◽  
Mass Ratio ◽  
Blended Coal ◽  
Microstructure And Mechanical Properties

This paper presents the results of an experimental study on the behavior of fly ash-, bottom ash-, and blended fly and bottom ash-based geopolymer concrete (GPC) cured at ambient temperature. Four bathes of GPC were manufactured to investigate the influence of the fly ash-to-bottom ash mass ratio on the microstructure, compressive strength and elastic modulus of GPC. All the results indicate that the mass ratio of fly ash-to-bottom ash significantly affects the microstructure and mechanical properties of GPCs

scholarly journals Investigation on cement-improved phyllite based on the vertical vibration compaction method

PLoS ONE ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. e0247599
Author(s):  
Yingjun Jiang ◽  
Jiangtao Fan ◽  
Yong Yi ◽  
Tian Tian ◽  
Kejia Yuan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Static Pressure ◽  
Cement Content ◽  
Vertical Vibration ◽  
Pressure Method ◽  
Vibration Compaction ◽  
Modulus Of Resilience ◽  
Compaction Method

The vertical vibration compaction method (VVCM), heavy compaction method and static pressure method were used to form phyllite specimens with different degrees of weathering. The influence of cement content, compactness, and compaction method on the mechanical properties of phyllite was studied. The mechanical properties of phyllite was evaluated in terms of unconfined compressive strength (Rc) and modulus of resilience (Ec). Further, test roads were paved along an expressway in China to demonstrate the feasibility of the highly weathered phyllite improvement technology. Results show that unweathered phyllite can be used as subgrade filler. In spite of increasing compactness, phyllite with a higher degree of weathering cannot meet the requirements for subgrade filler. With increasing cement content, Rc and Ec of the improved phyllite increases linearly. Rc and Ec increase by at least 15% and 17%, respectively, for every 1% increase in cement content and by at least 10% and 6%, respectively, for every 1% increase in compactness. The higher the degree of weathering of phyllite, the greater the degree of improvement of its mechanical properties.

Unconfined Compressive Strength and Drying Shrinkage of Cement Treated Recycling Base at Boyolali-Kartosuro Road Rehabilitation

2012 ◽  
Vol 626 ◽  
pp. 34-38
Author(s):  
Ary Setyawan ◽  
Anastasia Muda ◽  
Sholihin As’ad
Keyword(s):  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Cement Content ◽  
Drying Shrinkage ◽  
Reclaimed Asphalt Pavement ◽  
Reclaimed Asphalt ◽  
The Road ◽  
Road Base ◽  
Base Materials ◽  
Compressive Strength Test

Road rehabilitation and reconstruction generate large supplies of reclaimed asphalt pavement (RAP). One of the efforts to reuse the RAP is by insitu process and utilize it as road base materials. To get satisfying result from the RAP, it is necessary to add a certain amount of Ordinary Portland Cement (OPC) as stabilizer. This study investigate the potential use of OPC-stabilized RAP in road bases. Laboratory experimental method was applied by using material collected from road located at Boyolali-Kartasura as the object of the study with the cement content variations of 4%, 5% and 6% for unconfined compressive strength test (UCS) and the cement contents variation of 5% and 6% for drying shrinkage test. The range of cement contents required for unconfined compressive strength of cement treated recycling base (CTRB) are 5% to 6%. The cement content used at Boyolali - Kartosuro road rehabilitation was 5.5%. Drying shrinkage during 28 days is 805.3 micro strain for the cement content of 5% and 826.3 micro strain for the cement content of 6%. The drying shrinkage of the materials was quite high for CTRB, so that carefully design and attention need to take into account to avoid the cracks at the road base and the prospective of reflective cracking at the surface course of the road.

Laboratory Experimental Research on Mix Ratio Test of Cement Soil

2013 ◽  
Vol 438-439 ◽  
pp. 197-201
Author(s):  
Xian Hua Yao ◽  
Peng Li ◽  
Jun Feng Guan
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Cement Content ◽  
Ratio Test ◽  
Curing Time ◽  
Curing Conditions ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Cement Soil

Based on the generalization and analysis of laboratory experimental results on mix ratio, the effects of various factors such as cement content, water-cement ratio, curing time, curing conditions and types of cement on the mechanical properties of unconfined compressive strength of cement soil are presented. Results show that the unconfined compressive strength of cement soil increases with the growing curing time, and it is greatly affected by the cement content, water-cement ratio, cement types and curing time, while the effect of curing conditions is weak with a cement content of more than 10%. Moreover, the stress-strain of the cement soil responds with the cement content and curing time, increasing curing time and cement content makes the cement soil to be harder and brittle, and leads to a larger Young's modulus.

Research about the Effect of Polypropylene Fiber on Mechanical Properties of Curing Sludge

2011 ◽  
Vol 250-253 ◽  
pp. 788-794
Author(s):  
Shu Lin Zhan ◽  
Shu Sen Gao ◽  
Jun Ying Lai
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Shear Strength ◽  
Water Content ◽  
Unconfined Compressive Strength ◽  
Polypropylene Fiber ◽  
Physical And Mechanical Properties ◽  
Curing Time ◽  
Strength Tests ◽  
Different Content

In order to study the influence of modified polypropylene (PP) fiber on the physical and mechanical properties of curing sludge, the same amount of cement and different content of polypropylene fiber were mixed into the sludge. Unconfined compressive strength tests, water content tests and shear strength tests were carried out on different specimens with different curing time. The results show that the sludge curing effect is markedly improved by the addition of the polypropylene fiber. As to the curing sludge with the same curing time, when the content of the polypropylene fiber increases, the unconfined compressive strength and the cohesive strength greatly increase, and the internal frictional angle decreases.

scholarly journals Study on Mechanical Properties of Basalt Fiber-Reinforced Concrete with High Content of Stone Powder at High Temperatures

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Lina Xu ◽  
Daohan Song ◽  
Ning Liu ◽  
Wei Tian
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
High Temperature ◽  
Unconfined Compressive Strength ◽  
Fiber Length ◽  
Basalt Fiber ◽  
Fiber Content ◽  
Fiber Reinforced Concrete ◽  
Acoustic Response

Concrete materials are an important part of global structure, and their fire resistance directly affects the safety of buildings and tunnels. In this study, basalt fiber was used to reinforce concrete with high content of stone powder in order to enhance its high-temperature performance. The mechanical properties and ultrasonic characteristics at different temperatures were studied using the cube compressive strength test and nonlinear ultrasonic test. The results indicated that the addition of basalt fiber in specimens improved their compressive strength; however, this strength did not continuously increase with increases in the fiber length and fiber content, and the optimal values for fiber length and fiber content were determined to be 12 mm and 1 kg/m3 at 600°C, respectively. With increases in temperature, the unconfined compressive strength increased first and then decreased. When the temperature was 400°C, the unconfined compressive strength of the specimens reached their highest values and then decreased. When the temperature was 400°C and 600°C, the strength of the stone powder concrete with fiber was higher than that without fiber, which shows that fiber can improve the mechanical properties of concrete at high temperatures. Based on the Box-Behnken design (BBD) method, the unconfined compressive strength response regression model of basalt fiber-reinforced concrete with high content of stone powder, which follows parameters including fiber content, fiber length, and temperature at high-temperature environments, was established, and it was found that the interaction of fiber content, fiber length, and the temperature was significant based on multifactor interaction analysis. The analysis of ultrasonic signals based on the S transform showed that, with increases in temperature, the amplitudes of the acoustic response signals, the corresponding frequency spectrum, and the time-frequency spectrum were clearly reduced. At the same temperature, the amplitudes of the acoustic response signals of different concrete testing blocks did not change much and remained at the same level.

scholarly journals Influence of Solid Content, Cement/Tailings Ratio, and Curing Time on Rheology and Strength of Cemented Tailings Backfill

Minerals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 922
Author(s):  
Jiajian Li ◽  
Erol Yilmaz ◽  
Shuai Cao
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Rheological Properties ◽  
Flow Rate ◽  
Unconfined Compressive Strength ◽  
Solid Content ◽  
Similar Type ◽  
Curing Time ◽  
Flow Process ◽  
Resistance Loss

Understanding the flow process of cemented tailings backfill (CTB) is important for successful pumping into underground stopes. This study examines the effects of solid content (SC), cement/tailings (c/t) ratio, and curing time (CT) on rheological and mechanical properties of CTB mixes. The slurry concentration of the mixes was 65, 67, and 69 wt. %, with c/t ratios ranging from 1:4 to 1:20. Unconfined compressive strength (UCS) tests were performed on hardened CTB mixes after curing 3, 7, and 28 days. The rheological properties of CTB slurries are mainly related to SC. The yield stress and viscosity of fresh mixes increase with increasing SC, but the pipeline resistance loss (PRL) also increases with increasing SC. According to the analysis of variance, the SC and flow rate are the most significant parameters which greatly affect the PRL performance. The c/t and CT parameters are the most significant parameters for affecting the shrinkage rate. The findings offer a reference for theoretical optimization for mine filling systems of similar type.

EVALUATION OF SHRINKAGE AND DURABILITY OF GEOPOLYMER CONCRETE USING F-CLASS COAL ASHES

2014 ◽  
Vol 1 (1) ◽  
Author(s):  
Gum Sung Ryu ◽  
Kyung Taek Koh ◽  
Gi Hong An ◽  
Jang Hwa Lee
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Bottom Ash ◽  
Drying Shrinkage ◽  
Geopolymer Concrete ◽  
Cement Concrete ◽  
Fly Ash Concrete ◽  
Coal Ashes

This paper evaluates the strength, shrinkage and durability characteristics of concrete using 100% fly ash and bottom ash as binder. It is seen that the compressive strength of activated fly ash and bottom ash concrete reaches respectively 25 MPa and 30 MPa, and that the change in strength is insignificant as per the content of bottom ash powder. Moreover, the total amount of shrinkage of the activated bottom ash concrete appears to be larger than that of the activated fly ash concrete. In addition, the drying shrinkage and durable performance of the activated ash geopolymer concrete is verified to be superior to that of ordinary cement concrete.

Sign in / Sign up

Export Citation Format

Share Document