scholarly journals Synthesis, Characterization, and Biodistribution of GdF3:Tb3+@RB Nanocomposites

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 569
Author(s):  
Oleg E. Polozhentsev ◽  
Ilia A. Pankin ◽  
Darya V. Khodakova ◽  
Pavel V. Medvedev ◽  
Anna S. Goncharova ◽  
...  
Keyword(s):  
Rose Bengal ◽  
Electrostatic Interactions ◽  
Cost Effective ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
X Ray ◽  
Transmission Electron ◽  
Size And Morphology ◽  
Peg Coating

Herein we report the development of a nanocomposite for X-ray-induced photodynamic therapy (X-PDT) and computed tomography (CT) based on PEG-capped GdF3:Tb3+ scintillating nanoparticles conjugated with Rose Bengal photosensitizer via electrostatic interactions. Scintillating GdF3:Tb3+ nanoparticles were synthesized by a facile and cost-effective wet chemical precipitation method. All synthesized nanoparticles had an elongated “spindle-like” clustered morphology with an orthorhombic structure. The structure, particle size, and morphology were determined by transmission electron microscopy (TEM), X-ray diffraction (XRD), and dynamic light scattering (DLS) analysis. The presence of a polyethylene glycol (PEG) coating and Rose Bengal conjugates was proved by Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG), and ultraviolet–visible (UV-vis) analysis. Upon X-ray irradiation of the colloidal PEG-capped GdF3:Tb3+–Rose Bengal nanocomposite solution, an efficient fluorescent resonant energy transfer between scintillating nanoparticles and Rose Bengal was detected. The biodistribution of the synthesized nanoparticles in mice after intravenous administration was studied by in vivo CT imaging.

Monodisperse Fe3O4/Fe Core/Shell Nanoparticles with Enhanced Magnetic Property

2011 ◽  
Vol 306-307 ◽  
pp. 410-415
Author(s):  
Li Sun ◽  
Fu Tian Liu ◽  
Qi Hui Jiang ◽  
Xiu Xiu Chen ◽  
Ping Yang
Keyword(s):  
Average Diameter ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
X Ray ◽  
Transmission Electron ◽  
Shell Particles ◽  
Core Shell Nanoparticles

Core/shell type nanoparticles with an average diameter of 20nm were synthesized by chemical precipitation method. Firstly, Monodisperse Fe3O4 nanoparticles were synthesized by solvethermal method. FeSO4ž7H2O and NaBH4 were respectively dissolved in distilled water, then moderated Fe3O4 particles and surfactant(PVP) were ultrasonic dispersed into the FeSO4ž7H2O solution. The resulting solution was stirred 2 h at room temperature. Fe could be deposited on the surface of monodispersed Fe3O4 nanoparticles to form core-shell particles. The particles were characterized by using various experimental techniques, such as transmission electron microscopy (TEM), X-ray diffraction (XRD), AGM and DTA. The results suggest that the saturation magnetization of the nanocomposites is 100 emu/g. The composition of the samples show monodisperse and the sides of the core/shell nanoparticles are 20-30nm. It is noted that the formation of Fe3O4/Fe nanocomposites magnetite nanoparticles possess superparamagnetic property.

Ce-Based Nanoparticles Loaded with Cisplatin for Tumour Radiotherapy

2020 ◽  
Vol 16 (10) ◽  
pp. 1482-1494
Author(s):  
Li Sun ◽  
Chang Jiang ◽  
Wenhai Li ◽  
Zelai He ◽  
Gengming Wang ◽  
...  
Keyword(s):  
Photoelectric Effect ◽  
Inhibitory Effect ◽  
Precipitation Method ◽  
Treatment Mode ◽  
X Ray ◽  
Transmission Electron ◽  
Good Biocompatibility ◽  
Synergistic Inhibitory Effect

The combination of radiotherapy and chemotherapy is a common and useful treatment mode for tumours. But traditional methods inevitably lead to a variety of side effects. A drug delivery system (DDS), which has good biocompatibility and strong anti-tumour ability, is expected to solve this problem. Studies have shown that Ce-based nanoparticles (NPs) have good radiosensitization effect through the photoelectric effect. Hence, cisplatin-loaded LiLuF4 :Ce3+scintillation NPs (NP + Cis) were first constructed in this study, which was synthesized by the crystal precipitation method and characterized by transmission electron microscopy (TEM). Subsequently, its toxicity was verified, and the radiosensitization effect and basic radiosensitization mechanism on tumour cells and tumour-bearing mice were researched. Results showed that NP + Cis triggered massive DNA damage and effectively inhibited cell viability in vitro under the exposure of X-ray irradiation (IR). Moreover, the experiments in vivo showed that the NP + Cis had higher biosafety, which could absorb enough irradiation and produce a synergistic inhibitory effect on tumours through the releasing of Cis. NP + Cis can improve the performance of DDS in chemoradiotherapy.

Dialysis Preparation of Zinc-Substituted Nano-Hydroxyapatite and Its Characterization

2007 ◽  
Vol 330-332 ◽  
pp. 219-222 ◽  
Author(s):  
Sheng Min Zhang ◽  
W. Hu ◽  
W. Zhou ◽  
J. Li ◽  
Y.H. Liu ◽  
...  
Keyword(s):  
Inhibitory Effect ◽  
Limited Range ◽  
Transmission Electron Microscopy Observation ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Microscopy Observation ◽  
X Ray ◽  
Zinc Fractions ◽  
Transmission Electron

Nano-sized zinc-substituted hydroxyapatite (nano-ZnHA) has stimulatory effect on bone formation and inhibitory effect on osteoclastic bone resorption in vivo. Nano-ZnHA with serial zinc fractions (0, 2, 5, 10 mol%) were synthesized by an improved precipitation method based on dialysis process. Transmission electron microscopy observation indicated that the increase of Zn fraction led to smaller crystallite. X-ray diffraction of the products revealed that some typical characteristic peaks of HA displayed when the Zn fraction was below 10%. Fourier transform infrared spectroscopy showed that the bending peaks of the group-OH in HA became wider with the increase of Zn fraction and it disappeared at 10 mol%. The current work demonstrated that zinc could substitute for calcium into hydroxyapatite in the limited range of composition by using dialysis process.

scholarly journals Effects of Synthesis Conditions on the Formation of Si-Substituted Alpha Tricalcium Phosphates

2020 ◽  
Vol 21 (23) ◽  
pp. 9164
Author(s):  
Katarzyna Szurkowska ◽  
Łukasz Szeleszczuk ◽  
Joanna Kolmas
Keyword(s):  
Solid State ◽  
Crystalline Phase ◽  
Chemical Precipitation ◽  
Solid State Synthesis ◽  
Precipitation Method ◽  
Solid State Method ◽  
X Ray ◽  
Synthesis Conditions ◽  
Transmission Electron ◽  
State Method

Powders of α-TCP containing various amounts of silicon were synthesized by two different methods: Wet chemical precipitation and solid-state synthesis. The obtained powders were then physico–chemically studied using different methods: Scanning and transmission electron microscopy (TEM and SEM), energy-dispersive X-ray spectroscopy (EDS), powder X-ray diffractometry (PXRD), infrared and Raman spectroscopies (FT-IR and R), and solid-state nuclear magnetic resonance (ssNMR). The study showed that the method of synthesis affects the morphology of the obtained particles, the homogeneity of crystalline phase and the efficiency of Si substitution. Solid-state synthesis leads to particles with a low tendency to agglomerate compared to the precipitation method. However, the powders obtained by the solid-state method are less homogeneous and contain a significant amount of other crystalline phase, silicocarnotite (up to 7.33%). Moreover, the microcrystals from this method are more disordered. This might be caused by more efficient substitution of silicate ions: The silicon content of the samples obtained by the solid-state method is almost equal to the nominal values.

Synthesis and Characterization of Fe and Fe2O3 Nanoparticles

2013 ◽  
Vol 678 ◽  
pp. 46-49 ◽  
Author(s):  
Ponnaian Peula Kumari ◽  
Rachel Oommen ◽  
Chinna Kannaiyan Senthil Kumaran ◽  
Mariyappan Thambidurai ◽  
Natarajan Muthukumarasamy ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Secondary Phase ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Synthesis And Characterization ◽  
Cubic Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

Fe and Fe2 O3 nanoparticle have been synthesized by chemical precipitation method. The x-ray diffraction studies indicate the formation of Fe and Fe2 O3 nanoparticles with cubic phase and no secondary phase was observed. Surface morphology of Fe and Fe2 O3 has been studied using scanning electron microscopy (SEM). Transmission electron microscopy (TEM) images reveal that Fe and Fe2 O3 nanoparticle have size ranging from 25-41 nm.

Effectiveness of Calcium Deficiency in Nanosized Hydroxyapatite for Removal of Fe(II), Cu(II), Ni(II) and Cr(VI) Ions from Aqueous Solutions

2019 ◽  
Vol 56 ◽  
pp. 17-27
Author(s):  
Van Dat Doan ◽  
Van Thuan Le ◽  
Hoang Sinh Le ◽  
Dinh Hien Ta ◽  
Hoai Thuong Nguyen
Keyword(s):  
Electron Microscopy ◽  
Ion Exchange ◽  
Aqueous Solutions ◽  
Calcium Deficiency ◽  
Exchange Mechanism ◽  
Precipitation Method ◽  
X Ray ◽  
Transmission Electron ◽  
Bet Method ◽  
Langmuir Isotherm Model

In this work, nanosized calcium deficient hydroxyapatite (nCDHA) was synthesized by the precipitation method, and then utilized as an adsorbent for removal of Fe (II), Cu (II), Ni (II) and Cr (VI) ions from aqueous solutions after characterizing it by various techniques as scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX) and BET method. A possible structure of synthesized nCDHA was proposed. The adsorption study indicated that the adsorption equilibrium is well fitted with Langmuir isotherm model with the maximum adsorption capacities followed the order of Fe (II) > Cu (II) > Ni (II) > Cr (VI) with the values of 137.23, 128.02, 83.19 and 2.92 mg/g, respectively. The ion-exchange mechanism was dominant for the adsorption of metal ions onto nCDHA at initial metal concentrations lower than 0.01 mol/L. Along with the ion-exchange mechanism, there was an additional precipitation occurred on the surface of nCDHA in the case of Fe (II) and Cu (II) at initial concentrations higher than 0.01 mol/L.

Preparation of α-Ni(OH)2 with Flowerlike Hierarchical Architectures via Homogeneous Precipitation Method

2011 ◽  
Vol 284-286 ◽  
pp. 684-687
Author(s):  
Chang Yu Li ◽  
Li Li Liu ◽  
Shou Xin Liu
Keyword(s):  
Electron Microscopy ◽  
Precipitation Method ◽  
Homogeneous Precipitation ◽  
X Ray ◽  
Homogeneous Precipitation Method ◽  
Α Phase ◽  
Transmission Electron ◽  
Hierarchical Architectures ◽  
Flowerlike Structure ◽  
Adsorption Desorption

Without using any templates or surfactants, flowerlike α-nickel hydroxide (Ni(OH)2) was successfully synthesized by homogeneous precipitation method. The prepared products were characterized by X-ray powder diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and N2 adsorption-desorption. The prepared Ni(OH)2 is α-phase with specific surface area of 245.0 m2/g and shows flowerlike structure with 4-6 um in diameter.

scholarly journals Enhanced Photocatalytic Activity of Cu2O Cabbage/RGO Nanocomposites under Visible Light Irradiation

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1712
Author(s):  
Appusamy Muthukrishnaraj ◽  
Salma Ahmed Al-Zahrani ◽  
Ahmed Al Otaibi ◽  
Semmedu Selvaraj Kalaivani ◽  
Ayyar Manikandan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermo Gravimetric Analysis ◽  
Visible Region ◽  
Catalytic Performance ◽  
Precipitation Method ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dye Pollutants ◽  
Transmission Electron

Towards the utilization of Cu2O nanomaterial for the degradation of industrial dye pollutants such as methylene blue and methyl orange, the graphene-incorporated Cu2O nanocomposites (GCC) were developed via a precipitation method. Using Hummers method, the grapheme oxide (GO) was initially synthesized. The varying weight percentages (1–4 wt %) of GO was incorporated along with the precipitation of Cu2O catalyst. Various characterization techniques such as Fourier-transform infra-red (FT-IR), X-ray diffraction (XRD), UV–visible diffused reflectance (UV-DRS), Raman spectroscopy, thermo gravimetric analysis (TGA), energy-dispersive X-ray analysis (EDX), and electro chemical impedance (EIS) were followed for characterization. The cabbage-like morphology of the developed Cu2O and its composites were ascertained from field-emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HR-TEM). In addition, the growth mechanism was also proposed. The results infer that 2 wt % GO-incorporated Cu2O composites shows the highest value of degradation efficiency (97.9% and 96.1%) for MB and MO at 160 and 220 min, respectively. Further, its catalytic performance over visible region (red shift) was also enhanced to an appreciable extent, when compared with that of other samples.

Template Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation Method

2011 ◽  
Vol 311-313 ◽  
pp. 1713-1716 ◽  
Author(s):  
Yan Rong Sun ◽  
Tao Fan ◽  
Chang An Wang ◽  
Li Guo Ma ◽  
Feng Liu
Keyword(s):  
Electron Microscope ◽  
Chondroitin Sulfate ◽  
Aspartic Acid ◽  
Transmission Electron Microscope ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Transmission Electron ◽  
Co Precipitation

Nano-hydroxyapatite with different morphology was synthesized by the co-precipitation method coupled with biomineralization using Ca(NO3)2•4H2O and (NH4)2HPO4 as reagents, adding chondroitin sulfate, agarose and aspartic acid as template. The structure and morphology of the prepared powders were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM).

A novel design of HA-coated nanoparticles co-encapsulating plasmid METase and 5-Fu shows enhanced application in targeting gastric cancer stem cells

2018 ◽  
Vol 399 (3) ◽  
pp. 293-303 ◽  
Author(s):  
Weifeng Yang ◽  
Houting Zhang ◽  
Lin Xin
Keyword(s):  
Gastric Cancer ◽  
Tumor Growth ◽  
Precipitation Method ◽  
Inhibition Effect ◽  
Coated Nanoparticles ◽  
Transmission Electron ◽  
Targeted Drug ◽  
Gastric Cancer Stem Cells ◽  
Novel Design

AbstractNanoparticles (NPs) are recognized as an attractive vehicles for cancer treatment due to their targeted drug release. Gastric cancer is an important killer disease, and its therapy methods still need improvement. The NPs were prepared using a precipitation method, and were evaluated using transmission electron microscopy (TEM). MTT and Transwell assays were used to determine cell viability and apoptosis.In vivoexperiments were performed to validate the effects of NPs on tumor growth. Methioninase (METase)/5-Fu co-encaspulated NPs showed highest ζ size and lowest ζ potential than other NPs. The migration and tumorsphere formation ability of CD44(+) was stronger than CD44(−). The effects of METase/5-Fu co-encaspulated NPs on inhibition cell growth was stronger than that of 5-Fu encaspulated NPs, while HA coated NPs showed significant target ability than that NPs without HA. METase supplementation promoted the inhibition effect of 5-Fu on thymidylate synthetase (TS), as well as cell apoptosis. Thein vivoexperiments demonstrated that HA coated NPs significantly inhibited tumor growth. It was concluded that HA-coated NPs enhance the target ability, while METase/5-Fu co-encaspulated NPs promote the inhibition effects on tumor growth in gastric cancer.

Sign in / Sign up

Export Citation Format

Share Document