scholarly journals A Novel Stick-Slip Nanopositioning Stage Integrated with a Flexure Hinge-Based Friction Force Adjusting Structure

Micromachines ◽  
2020 ◽  
Vol 11 (8) ◽  
pp. 765
Author(s):  
Junhui Zhu ◽  
Peng Pan ◽  
Yong Wang ◽  
Sen Gu ◽  
Rongan Zhai ◽  
...  
Keyword(s):  
Friction Force ◽  
High Speed ◽  
Simulation Analysis ◽  
Load Capacity ◽  
Dynamic Performance ◽  
Critical Role ◽  
Vertical Direction ◽  
Flexure Hinge ◽  
Stick Slip ◽  
Static Performance

The piezoelectrically-actuated stick-slip nanopositioning stage (PASSNS) has been applied extensively, and many designs of PASSNSs have been developed. The friction force between the stick-slip surfaces plays a critical role in successful movement of the stage, which influences the load capacity, dynamic performance, and positioning accuracy of the PASSNS. Toward solving the influence problems of friction force, this paper presents a novel stick-slip nanopositioning stage where the flexure hinge-based friction force adjusting unit was employed. Numerical analysis was conducted to estimate the static performance of the stage, a dynamic model was established, and simulation analysis was performed to study the dynamic performance of the stage. Further, a prototype was manufactured and a series of experiments were carried out to test the performance of the stage. The results show that the maximum forward and backward movement speeds of the stage are 1 and 0.7 mm/s, respectively, and the minimum forward and backward step displacements are approximately 11 and 12 nm, respectively. Compared to the step displacement under no working load, the forward and backward step displacements only increase by 6% and 8% with a working load of 20 g, respectively. And the load capacity of the PASSNS in the vertical direction is about 72 g. The experimental results confirm the feasibility of the proposed stage, and high accuracy, high speed, and good robustness to varying loads were achieved. These results demonstrate the great potential of the developed stage in many nanopositioning applications.

scholarly journals Influence of Temperature Effect on the Static and Dynamic Performance of Gas-Lubricated Microbearings

Micromachines ◽  
2020 ◽  
Vol 11 (8) ◽  
pp. 716
Author(s):  
Liangliang Li ◽  
Zhufeng Liu ◽  
Chongyu Wang ◽  
Yonghui Xie
Keyword(s):  
High Speed ◽  
Load Capacity ◽  
Dynamic Performance ◽  
Operating Environment ◽  
Low Friction ◽  
Operating Stability ◽  
Comprehensive Performance ◽  
Different Temperatures ◽  
Dynamic Performances ◽  
The Difference

Gas-lubricated microbearings are widely applied in multiple fields due to their advantages of high-speed, low friction level and other features. The operating environment of microbearings is complex, and the difference of temperature has an important influence on their comprehensive performance. In this investigation, FEM (finite element method) is employed to investigate the static, dynamic and limit characteristics of microbearings lubricated by different kinds of gas at different temperatures. The results show that the rise of temperature leads to the decline of equivalent viscosity of gas, which weakens the load capacity of microbearings, and furthermore, affects the operating stability of microbearings. The dynamic performances of microbearings at different temperatures are very different, and the two dynamic limit characteristics are more sensitive to temperature when it changes.

scholarly journals Dynamic Modelling and Analysis of the Microsegment Gear

2016 ◽  
Vol 2016 ◽  
pp. 1-13 ◽  
Author(s):  
Yangshou Xiong ◽  
Kang Huang ◽  
Tao Wang ◽  
Qi Chen ◽  
Rui Xu
Keyword(s):  
High Speed ◽  
Load Capacity ◽  
Dynamic Performance ◽  
Dynamic Modelling ◽  
Weight Ratio ◽  
Load Condition ◽  
Main Idea ◽  
Heavy Load ◽  
Rotating Speed ◽  
Involute Gear

The development of technology requires higher load capacity, rotating speed, power-weight ratio, lower vibration, and noise with respect to the gear transmission. The new type microsegment gear’s tooth profile curve is composed of many microsegments. Previous researches indicate that the microsegment gear has a good static performance, while the dynamic behavior of the microsegment gear has never been investigated. This paper will focus on the dynamic performance of the gear. The profile deviation between microsegment gear and involute gear is regarded as a displacement excitation in the proposed dynamic model. The numerical analysis for three cases is conducted and the results shows that, in low-speed and heavy-load, medium-speed and medium-load conditions, microsegment gear and involute gear both exhibit a good performance, while, in high-speed and heavy-load condition, microsegment gear has a better performance than that of involute gear. The influence of backlash on the dynamic performance is also studied. It is found that the variation of backlash does not change the type of motion, but the vibration amplitude and the stability of the motion are much affected. The main idea in this paper is supposed to provide a novel method for the precision grinding of the microsegment gear.

Dynamics modeling and analysis of a four-wheel independent motor-drive virtual-track train

2020 ◽  
pp. 146441932096401
Author(s):  
Zhonghui Yin ◽  
Jiye Zhang ◽  
Haiying Lu ◽  
Weihua Zhang
Keyword(s):  
High Speed ◽  
Load Capacity ◽  
Dynamic Performance ◽  
Spatial Dynamics ◽  
Dynamic Responses ◽  
Dynamics Modeling ◽  
Dynamics Model ◽  
Coupling Effects ◽  
Dynamic Interactions ◽  
Modeling And Analysis

Due to urbanisation and the economic challenges of traffic, it is urgently necessary to develop an environmentally friendly virtual-track train with suitable speed, high load capacity and low construction cost in China. To guide the design and evaluate this train’s dynamic behaviour, a spatial-dynamics model has been developed based on the dynamics theory and tyre-road interaction. The proposed dynamics model comprises mechanical vehicle systems, traction and braking characteristics and tyre-road dynamic interactions. The coupling effects amongst those systems of virtual track train are derived theoretically for the first time. The nonlinear characteristics of the tyre are modelled by the transit tyre-magic formula with consideration of road irregularities. Based on a designed PID controller and the comprehensive dynamics model, the dynamic performance of the system can be revealed considering motion coupling effects and complicated excitations, especially under traction and braking conditions. The dynamic responses of whole virtual track train can be obtained by numerical integration under different conditions. The vibration characteristics of such train are assessed under running at a constant speed and during the traction/braking process. The results show that the vibrations of the vehicle system are significantly influenced by road irregularities, especially at high speed ranges. The motions and vibrations of different components are intensive coupled, which should not to be neglected in the dynamics assessment of the virtual track train. Besides, the dynamics model can also be applied to dynamics-related assessment (fatigue, strength and some damage conditions, et al.) and parameter optimisation of the virtual-track train.

Effect of misalignment and rarefaction effect on the comprehensive characteristic of MEMS gas bearing

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Liangliang Li ◽  
Yonghui Xie
Keyword(s):  
Peer Review ◽  
High Speed ◽  
Rarefied Gas ◽  
Load Capacity ◽  
Content Type ◽  
Rarefaction Effect ◽  
Comprehensive Performance ◽  
Static Performance ◽  
The Stability ◽  
Gas Bearing

Purpose Owing to the development of the smaller-sized rotational machinery, the demand for the high-speed and low-resistance gas bearing increases rapidly. The research of micro gas bearing in the condition of rarefied gas state is still not satisfied. Therefore, the purpose of this paper is to present a numerical investigation of the effect of misalignment and rarefaction effect on the comprehensive performance of micro-electrical-mechanical system (MEMS) gas bearing. Design/methodology/approach The Fukui and Kaneko model is expanded to 2D solution domain to describe the flow field parameters. The finite element method is used to discretize the equation. Newton–Raphson method is used to solve the nonlinear equations for the static performance of gas bearing, and partial deviation method is adopted for the solution of dynamic equations. Findings The static and dynamic characteristics of MEMS gas bearing are calculated, and the comparison is made to study the influence of rarefaction effect and misalignment. The results show that the rarefaction effect will decrease bearing load capacity compared with traditional solution of Reynolds equation, and the misalignment will reduce the stability of bearing. The influence of misalignment on gas film thickness is also analyzed in this paper. Originality/value The investigation of this paper emerges the change regularity of comprehensive performance of MEMS gas bearing considering rarefaction effect and misalignment, which provides a reference for the actual manufacturing of MEMS gas bearing and for the safety operation of micro dynamic machinery. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2020-0023/

On the characteristics of gas foil conical bearings considering misalignment

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hongyang Hu ◽  
Ming Feng ◽  
Tianming Ren
Keyword(s):  
Film Thickness ◽  
Peer Review ◽  
Load Capacity ◽  
Dynamic Performance ◽  
Critical Role ◽  
Friction Torque ◽  
Misalignment Angle ◽  
Content Type ◽  
Stiffness Model ◽  
Dynamic Performances

Purpose The purpose of this paper is to study the characteristics of gas foil conical bearings (GFCBs) considering the misalignment, the static and dynamic performances with different misalignment cases were studied. Design/methodology/approach A test rig on the air compressor supported by GFCBs has been developed to measure the practicability. A nonlinear bump stiffness model and one-dimensional beam top foil stiffness model were used as a basis for the calculation of static and dynamic performance. The finite element method and finite difference method are adopted to solve the Reynolds equation and the film thickness equation coupled, in which different misalignment cases were considered by changing the film thickness. Findings The supporting performance of GFCB is excellent, and the film clearance plays a critical role. The misalignment effects depend on the assembled angle and the misalignment angle. The load capacity, friction torque, temperature of GFCB decrease when the misalignment assembled angle is between 120° and 240°, while the dynamic bearing stability is improved. The static and dynamic performances show the opposite law for the other assembled angles, and the misalignment effect is more dramatic when there is a larger misalignment angle. Moreover, the bearing and running parameters largely affect the bearing performance. Originality/value The present study focuses on the static and dynamic characteristics of GFCB and investigates the effects of misalignment on the bearing performance. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2020-0117

scholarly journals The Asymmetric Flexure Hinge Structures and the Hybrid Excitation Methods for Piezoelectric Stick-Slip Actuators

2021 ◽  
Author(s):  
Tinghai Cheng ◽  
Xiaosong Zhang ◽  
Xiaohui Lu ◽  
Hengyu Li ◽  
Qi Gao ◽  
...  
Keyword(s):  
High Speed ◽  
Low Voltage ◽  
Mode Conversion ◽  
Resonant Mode ◽  
Superior Performance ◽  
Flexure Hinge ◽  
Asymmetric Structure ◽  
Stick Slip ◽  
Output Performance ◽  
Long Stroke

Piezoelectric stick–slip actuators have become viable candidates for precise positioning and precise metering due to simple structure and long stroke. To improve the performances of the piezoelectric stick–slip actuators, our team deeply studies the actuators from both structural designs and driving methods. In terms of structural designs, the trapezoid-type, asymmetrical flexure hinges and mode conversion piezoelectric stick–slip actuators are proposed to improve the velocity and load based on the asymmetric structure; besides, a piezoelectric stick–slip actuator with a coupled asymmetrical flexure hinge mechanism is also developed to achieve the bidirectional motion. In terms of driving methods, a non-resonant mode smooth driving method (SDM) based on ultrasonic friction reduction is first proposed to restrain the backward motion during the rapid contraction stage. Then, a resonant mode SDM is further developed to improve the output performance of the piezoelectric stick–slip actuator. On this basis, the low voltage and symmetry of the SDM are also discussed. Finally, the direction-guidance hybrid method (DGHM) excitation method is presented to achieve superior performance, especially for high speed.

Simulation Analysis of Influences of Anti-Roll Torsion Bar on Vehicle Dynamics

2013 ◽  
Vol 409-410 ◽  
pp. 1486-1491
Author(s):  
Zhuo Yu He
Keyword(s):  
Vehicle Dynamics ◽  
High Speed ◽  
Simulation Analysis ◽  
Dynamic Performance ◽  
Rail Vehicles ◽  
Urban Rail ◽  
Passenger Trains ◽  
Secondary Suspension ◽  
Dynamics Models ◽  
Torsion Bar

In the secondary suspension of urban rail vehicles and high-speed passenger trains, combination of air springs and anti-roll torsion bar is widely used. However, in its practical use, cracks appear in the anti-roll torsion bar and vehicle curve performance is lower. Through analysis of anti-roll torsion bar, acceleration being taken into account, the dynamics models of anti-roll torsion bar and the vehicle itself are established. The results indicate that the combination of anti-roll torsion bar and rubber joints is superior to present a more reasonable anti-roll stiffness, to ensure better dynamic performance of the train, and also to lengthen the life of the anti-roll torsion bar.

FDM Based Analysis of Gas Lubricated Foil Journal Bearing

2009 ◽  
Author(s):  
Nikita Makwana
Keyword(s):  
High Speed ◽  
Load Capacity ◽  
Differential Method ◽  
Operating Characteristics ◽  
Computing Environment ◽  
Hydrodynamic Analysis ◽  
Foil Bearing ◽  
Minimum Film Thickness ◽  
Static Performance ◽  
Gas Bearing

This article deals with the finite differential method of static performance of a foil journal gas bearing. A foil bearing is a self acting hydrodynamic device, which separates stationary and rotating components of high speed rotating machinery by a fluid film of air or other gaseous lubricant. The present work concentrates on common approach in foil bearing in calculating the carrying capacity for a given shaft position (figure-1). During this work the external load is fixed and related shaft position is investigated. For steady operating characteristics such as minimum film thickness and load capacity predicted for the foil bearing. The system of governing equation is solved numerically with FDM by a computer program written in the MATLAB computing environment. A generalized hydrodynamic analysis is conducted to systematically analyses the effect like bearing speed is discussed.

Paper 8: An Experimental Investigation of the Floating-Pad Journal Bearing

1969 ◽  
Vol 184 (12) ◽  
pp. 54-59
Author(s):  
R. B. Howarth
Keyword(s):  
Experimental Investigation ◽  
High Speed ◽  
Journal Bearing ◽  
Load Capacity ◽  
Excited Vibration ◽  
Low Load ◽  
Static Performance

This paper describes an experimental investigation into the static performance of a floating-pad journal bearing with four pads. Up to moderate eccentricities the test bearing was found to have a somewhat greater load capacity than an equivalent plain journal bearing, and there was no evidence of instability. The geometry of the bearing also allows high lubricant flows to be used for cooling purposes without requiring excessive supply pressures. Some difficulties were experienced with starting under load and with a self-excited vibration which occurred at moderate to high eccentricities. The results of the investigation suggest that this form of bearing is most suitable for low-load, high-speed applications.

Sign in / Sign up

Export Citation Format

Share Document