scholarly journals Responses of Acidithiobacillus thiooxidans A01 to Individual and Joint Nickel (Ni2+) and Ferric (Fe3+)

Minerals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 82 ◽  
Author(s):  
Aijia Chen ◽  
Xiaodong Hao ◽  
Yunhua Xiao ◽  
Kai Zou ◽  
Hongwei Liu ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Ferric Iron ◽  
Ph Value ◽  
Sulfur Metabolism ◽  
Metal Resistance ◽  
Acidithiobacillus Thiooxidans ◽  
Promoting Effect ◽  
Maximum Cell Density ◽  
Nickel Ion ◽  
Whole Process

Acidithiobacillus thiooxidans A01 is widely used in bioleaching processes and commonly thrives in most metal-rich environments. However, interactions between different heavy metals remain obscure. In this study, we elaborated the effect of ferric iron on the growth and gene expression of At. thiooxidans A01 under the stress of nickel. The results showed that 600 mM Ni2+ completely inhibited the growth and sulfur metabolism of At. thiooxidans A01. However, trace amounts of Fe3+ (0.5 mM) facilitated the growth of At. thiooxidans A01 in the presence of 600 mM Ni2+. With the addition of 5 mM Fe3+, the maximum cell density reached 1.84 × 108 cell/mL, and pH value was 0.95. In addition, metal resistance-related and sulfur metabolism genes were significantly up regulated with extra ferric iron. Taking the whole process into account, the promoting effect of Fe3+ addition can be attributed to the following: (1) alleviation of the effects of Ni2+ toxicity and restoring the growth of At. thiooxidans A01, (2) a choice of multiple pathways to export nickel ion and producing precursor of chelators of heavy metals. This can suggest that microorganisms may widely exhibit metabolic activity in iron-rich environments with heavy metals. Our study will facilitate the technique development for the processing of ore bodies with highly challenging ore compositions.

Screening of heavy metal and antibiotic resistance among Proteus vulgaris isolates from hospital wastewater of Northern India

2021 ◽  
Vol 19 ◽  
Author(s):  
Manzar Alam ◽  
Mohd Imran ◽  
Syed Sayeed Ahmad
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Multiple Drug Resistance ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Antibiotics Resistance ◽  
Proteus Vulgaris ◽  
Resistance To Antibiotics ◽  
Transfer Frequency ◽  
Resistance Patterns

Background: Microbial resistance to antibiotics and heavy metals is a rising problem in the world today. All the Proteus vulgaris isolates showed their MIC in between 50-1600 µg/ml. Of 70% and 46% of the isolates showed their MIC at 800-1200 µg/ml against Zn2+ and Cu2+ while 80% of the isolates showed their MIC at 100-200 µg/ml against Ni2+, respectively. All Proteus vulgaris isolates also exhibited multiple resistance patterns (2-7 heavy metals) in different combination of metals. The Multi metal resistance Index (MHMR) ranges were found (0.04-0.5). Methods: A high level of antibiotics resistance was observed against Methicillin (100%) and least to Oflaxicin (6%), Gentamycine and Neomycin (10%). All Proteus vulgaris isolates also showed multiple drug resistance patterns (2-12 antibiotics) in different combination of antibiotics. The MAR index ranges were found (0.02-0.7). Of 98%, 84% and 80% of the total isolates showed urease, gelatinase and amylase activity. Results: The Proteus vulgaris isolates contained plasmid of size ranging from 42.5 to 57.0kb and molecular weight of plasmids ranged from 27.2 to 37.0 MD. Incidences of resistance transfer, 7 pairs of isolates were assessed for the transfer of the antibiotic/ heavy metal resistance markers. The higher (4.4x10-1 and 3.4x10-1) transfer frequency was observed among antibiotic and heavy metal while lower transfer frequency were (5.0x10-2 and 1.0x10-2) showed against antibiotic and heavy metal in both the medium from the entire site tested, respectively. Conclusion: Indicating the high threat of environmental pollution and appearance of heavy metal resistance which may support the enlargement of resistance to antibiotics among the pathogens.

scholarly journals Optimization of pH, temperature and carbon source for bioleaching of heavy metals by Aspergillus flavus isolated from contaminated soil

2019 ◽  
Vol 42 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Sadia Qayyum ◽  
Ke Meng ◽  
Sidra Pervez ◽  
Faiza Nawaz ◽  
Changsheng Peng
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Aspergillus Flavus ◽  
Contaminated Soil ◽  
Ph Value ◽  
Optimal Conditions ◽  
Batch Experiments ◽  
Molecular Biological Analysis ◽  
One Step ◽  
Industrial Mining

Abstract Soil contamination with heavy metal content is a growing concern throughout the world as a result of industrial, mining, agricultural and domestic activities. Fungi are the most common and efficient group of heavy metal resistant microbe family which have potential for metal bioleaching. The use of filamentous fungi in bioleaching of heavy metals from contaminated soil has been developed recently. The current study intends to isolate a strain with the ability to degrade the pH value of the liquid medium. Identification results based on morphological and molecular biological analysis gave a 98% match to Aspergillus flavus. Batch experiments were conducted to select the optimal conditions for bioleaching process which indicated that 130 mg/ L sucrose, neutral pH and temperature of 30°C were more suitable during 15-day bioleaching experiments using A. flavus. In one-step bioleaching, the bioleaching efficiencies were 18.16% for Pb, 39.77% for Cd and 58.22% for Zn+2, while two-step bioleaching showed efficiencies of 16.91% for Pb, 49.66% for Cd and 65.73% for Zn+2. Overall, this study indicates that bioleaching of heavy metals in contaminated soil using A. flavus has the potential for contaminated soil remediation.

scholarly journals Pollution Scenario due to Discharge of Effluent from Agrochemicals and Pesticides Manufacturing Industries of Dombivali Industrial Belt of Mumbai, India

2013 ◽  
Vol 22 ◽  
pp. 8-15
Author(s):  
P.U. Singare ◽  
S.S. Dhabarde
Keyword(s):  
Heavy Metals ◽  
Ph Value ◽  
Winter Season ◽  
Chemical Properties ◽  
Total Solid ◽  
Average Concentration ◽  
Summer Season ◽  
Manufacturing Industries ◽  
Toxic Heavy Metals ◽  
Physico Chemical

The paper deals with monitoring of pollution arising due to agrochemicals and pesticides manufacturing industries located along the Dombivali industrial belt of Mumbai, India. The study was carried for the period of one year from June, 2012 to May, 2013 to study the level of toxic heavy metals and the physico-chemical properties of waste water effluents discharged from the above industries. The average concentration of Cu, Ni, Cr, Pb and Zn was found to be maximum of 29.86, 0.90, 1.16 and 1.19 ppm respectively in summer season, while average Fe concentration was maximum of 51.10 ppm in winter season. The average pH value of the effluent was found to be maximum of 12.95 in summer season, while average conductivity value was maximum of 21085 µmhos/cm in rainy season. The majority of physco-chemical parameters like alkalinity, hardness, salinity, chloride, cyanide, phosphate, total solid, BOD and COD content were found to be maximum in summer season having the average values of 1918, 186, 4, 11.20, 0.07, 81, 6391, 685 and 2556 ppm respectively. The average DO content was found to be low of 4.5 ppm in winter season. It was observed that the concentration level of majority of the toxic heavy metals and physico-chemical properties were above the tolerable limit set for inland surface water. The results of present study indicates that the existing situation if mishandled can cause irreparable ecological harm in the long term well masked by short term economic prosperity due to extensive industrial growth

scholarly journals Mechanism of the process of decomposition of apatitis with phosphoric acid

2019 ◽  
Vol 81 (1) ◽  
pp. 294-297
Author(s):  
R. F. Sabirov ◽  
A. F. Makhotkin ◽  
Yu. N. Sakharov ◽  
I. A. Makhotkin ◽  
I. Yu. Sakharov
Keyword(s):  
Phosphoric Acid ◽  
Ph Value ◽  
Batch Reactor ◽  
Experimental Studies ◽  
Hydrogen Ions ◽  
Experimental Conditions ◽  
Monocalcium Phosphate ◽  
Ph Values ◽  
Whole Process ◽  
Proportional Increase

Experimental studies of the kinetics and mechanism of the process, decomposition of apatite by phosphoric acid, in the Apatite-H3PO4-H2O system without the addition of sulfuric acid have been performed. The study of the decomposition process of Kovdorsky apatite with certain particle sizes was carried out in a batch reactor with a volume of 1 dm3 with stirring of the reaction mixture, and an initial concentration of phosphoric acid of 17% by weight, at a temperature of 78–82 °C. Observation of the process was carried out by determining the concentration of phosphoric acid and the concentration of monocalcium phosphate. The acidity of the reaction mixture was determined by the pH meter readings (pH-105 MA with a glass combined-ESC-10603 electrode). It was shown that during the whole process a constant smooth increase in the pH value of the reaction mixture to pH 6 occurs. Comparison of the pH values of the reaction mixture during the actual at the time of determining the concentration of phosphoric acid and pH of phosphoric acid of the corresponding concentration in the aqueous solution shows that the pH value of the reaction mixture is significantly affected by the presence of monocalcium phosphate gel. During the process, during the first thirty minutes, the concentration of phosphoric acid decreases from 17 to 10% by weight, the corresponding quantitative formation of monocalcium phosphate gel and a proportional increase in the pH of the reaction mixture. Then, as the concentration of phosphoric acid decreases, the process slows down and does not proceed to the end under the experimental conditions. The dependence of the concentration of hydrogen ions in the reaction mixture on the time of the process of decomposition of apatite in phosphoric acid, which is presented in logarithmic coordinates, shows that the mechanism of formation of hydrogen ions during the whole process does not change. Thus, it is shown that the process of decomposition of apatite by phosphoric acid in the Apatite-H3PO4-H2O system proceeds with the formation of an intermediate product - monocalcium phosphate gel. When this occurs, a corresponding significant change in the pH values of the reaction mixture occurs. During the whole process there is a constant decrease in the concentration of phosphoric acid.

scholarly journals Comparison of sorption efficiency of natural and MnO2 coated zeolite for copper removal from model solutions

2021 ◽  
Vol 900 (1) ◽  
pp. 012003
Author(s):  
M Balintova ◽  
Z Kovacova ◽  
S Demcak ◽  
Y Chernysh ◽  
N Junakova
Keyword(s):  
Heavy Metals ◽  
Removal Efficiency ◽  
Ph Value ◽  
Batch Experiments ◽  
Modified Zeolite ◽  
Optimum Ph ◽  
Removal Of Heavy Metals ◽  
Initial Ph ◽  
Correlation Factors ◽  
Maximum Removal

Abstract Removal of heavy metals from the environment is important for living beings. The present work investigates the applicability of the natural and MnO2 - coated zeolite as sorbent for the removal of copper from synthetic solutions. Batch experiments were carried out to identify the influence of initial pH and concentration in the process of adsorption. A maximum removal efficiency of Cu(II) was observed in 10 mg/L for natural (95.6%) and modified (96.4%) zeolite, where the values was almost identical, but at concentration of 500 mg/L was the removal efficiency of modified zeolite three times higher. Based on the correlation factors R2, the Langmuir isotherms better describe the decontamination process than Freundlich. The optimum pH value was set at 5.0.

scholarly journals A Review on the Resistance and Accumulation of Heavy Metals by Different Microbial Strains

2022 ◽  
Author(s):  
Madhuri Girdhar ◽  
Zeba Tabassum ◽  
Kopal Singh ◽  
Anand Mohan
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Volcanic Eruptions ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Contaminated Sites ◽  
Bacillus Species ◽  
Polluted Sites ◽  
Pollution Accumulation ◽  
Microbial Strains

Heavy metals accumulated the earth crust and causes extreme pollution. Accumulation of rich concentrations of heavy metals in environments can cause various human diseases which risks health and high ecological issues. Mercury, arsenic, lead, silver, cadmium, chromium, etc. are some heavy metals harmful to organisms at even very low concentration. Heavy metal pollution is increasing day by day due to industrialization, urbanization, mining, volcanic eruptions, weathering of rocks, etc. Different microbial strains have developed very efficient and unique mechanisms for tolerating heavy metals in polluted sites with eco-friendly techniques. Heavy metals are group of metals with density more than 5 g/cm3. Microorganisms are generally present in contaminated sites of heavy metals and they develop new strategies which are metabolism dependent or independent to tackle with the adverse effects of heavy metals. Bacteria, Algae, Fungi, Cyanobacteria uses in bioremediation technique and acts a biosorbent. Removal of heavy metal from contaminated sites using microbial strains is cheaper alternative. Mostly species involved in bioremediation include Enterobacter and Pseudomonas species and some of bacillus species too in bacteria. Aspergillus and Penicillin species used in heavy metal resistance in fungi. Various species of the brown algae and Cyanobacteria shows resistance in algae.

scholarly journals Transcriptomes of the Extremely Thermoacidophilic Archaeon Metallosphaera sedula Exposed to Metal “Shock” Reveal Generic and Specific Metal Responses

2016 ◽  
Vol 82 (15) ◽  
pp. 4613-4627 ◽  
Author(s):  
Garrett H. Wheaton ◽  
Arpan Mukherjee ◽  
Robert M. Kelly
Keyword(s):  
Metal Toxicity ◽  
Cellular Response ◽  
Sulfur Metabolism ◽  
Metal Resistance ◽  
Open Reading Frames ◽  
Copper Resistance ◽  
Natural Environments ◽  
Cluster Assembly ◽  
Content Type ◽  
Metallosphaera Sedula

ABSTRACTThe extremely thermoacidophilic archaeonMetallosphaera sedulamobilizes metals by novel membrane-associated oxidase clusters and, consequently, requires metal resistance strategies. This issue was examined by “shocking”M. sedulawith representative metals (Co2+, Cu2+, Ni2+, UO22+, Zn2+) at inhibitory and subinhibitory levels. Collectively, one-quarter of the genome (554 open reading frames [ORFs]) responded to inhibitory levels, and two-thirds (354) of the ORFs were responsive to a single metal. Cu2+(259 ORFs, 106 Cu2+-specific ORFs) and Zn2+(262 ORFs, 131 Zn2+-specific ORFs) triggered the largest responses, followed by UO22+(187 ORFs, 91 UO22+-specific ORFs), Ni2+(93 ORFs, 25 Ni2+-specific ORFs), and Co2+(61 ORFs, 1 Co2+-specific ORF). While one-third of the metal-responsive ORFs are annotated as encoding hypothetical proteins, metal challenge also impacted ORFs responsible for identifiable processes related to the cell cycle, DNA repair, and oxidative stress. Surprisingly, there were only 30 ORFs that responded to at least four metals, and 10 of these responded to all five metals. This core transcriptome indicated induction of Fe-S cluster assembly (Msed_1656-Msed_1657), tungsten/molybdenum transport (Msed_1780-Msed_1781), and decreased central metabolism. Not surprisingly, a metal-translocating P-type ATPase (Msed_0490) associated with a copper resistance system (Cop) was upregulated in response to Cu2+(6-fold) but also in response to UO22+(4-fold) and Zn2+(9-fold). Cu2+challenge uniquely induced assimilatory sulfur metabolism for cysteine biosynthesis, suggesting a role for this amino acid in Cu2+resistance or issues in sulfur metabolism. The results indicate thatM. sedulaemploys a range of physiological and biochemical responses to metal challenge, many of which are specific to a single metal and involve proteins with yet unassigned or definitive functions.IMPORTANCEThe mechanisms by which extremely thermoacidophilic archaea resist and are negatively impacted by metals encountered in their natural environments are important to understand so that technologies such as bioleaching, which leverage microbially based conversion of insoluble metal sulfides to soluble species, can be improved. Transcriptomic analysis of the cellular response to metal challenge provided both global and specific insights into how these novel microorganisms negotiate metal toxicity in natural and technological settings. As genetics tools are further developed and implemented for extreme thermoacidophiles, information about metal toxicity and resistance can be leveraged to create metabolically engineered strains with improved bioleaching characteristics.

scholarly journals Chemical elution treatment of synthetic diamond production wastewater contaminated soil

2019 ◽  
Vol 136 ◽  
pp. 06034
Author(s):  
Guang-chen SU ◽  
Xiang-xiang WANG ◽  
Ying YANG ◽  
Hai-shan ShI
Keyword(s):  
Heavy Metals ◽  
Contaminated Soil ◽  
Synthetic Diamond ◽  
Ph Value ◽  
Economic Factors ◽  
Time Cost ◽  
Liquid Ratio ◽  
Removal Rates ◽  
Elution Time ◽  
Solid Liquid

The optimal removal conditions of heavy metal Coand Nicomposite contaminated soil were studied by the method of oscillating elution. The removal effects of different eluents on Coand Niat different concentrations were discussed.The results showed that the removal efficiency of citric acid with the concentration of 0.2mol•L-1was the best,and the removal rates of Coand Niwere 73.40% and 73.03%.On this basis, the effects of solid-liquid ratio, pH and elution time on the elution effect were investigated.The resultsshow that the trend of the two heavy metals affected by the above three factors is about the same. As the solid-liquid ratio decreases, the elution effect gradually increases, but the growth range is different.As the pH increases, the elution effect of the two heavy metals decreases. In addition, the removal rates of the two heavy metals show a trend of rising first, then stabilizing, and then continuing to rise. Considering economic factors, time cost and treatment effect, the best elution conditions aresolid-liquid ratio of 1: 20, pH value of 2 and elution time of 6 h.

scholarly journals Isolation and Molecular Identification of Virulence, Antimicrobial and Heavy Metal Resistance Genes in Livestock-Associated Methicillin-Resistant Staphylococcus aureus

Pathogens ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 79 ◽  
Author(s):  
Chumisa C. Dweba ◽  
Oliver T. Zishiri ◽  
Mohamed E. El Zowalaty
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Staphylococcus Aureus ◽  
South African ◽  
Resistance Genes ◽  
Heavy Metal Resistance ◽  
Livestock Production ◽  
Metal Resistance ◽  
Diffusion Method ◽  
Methicillin Resistant

Staphylococcus aureus is one of the most important pathogens of humans and animals. Livestock production contributes a significant proportion to the South African Gross Domestic Product. Consequently, the aim of this study was to determine for the first time the prevalence, virulence, antibiotic and heavy metal resistance in livestock-associated S. aureus isolated from South African livestock production systems. Microbial phenotypic methods were used to detect the presence of antibiotic and heavy metal resistance. Furthermore, molecular DNA based methods were used to genetically determine virulence as well as antibiotic and heavy metal resistance determinants. Polymerase chain reaction (PCR) confirmed 217 out of 403 (53.8%) isolates to be S. aureus. Kirby-Bauer disc diffusion method was conducted to evaluate antibiotic resistance and 90.8% of S. aureus isolates were found to be resistant to at least three antibiotics, and therefore, classified as multidrug resistant. Of the antibiotics tested, 98% of the isolates demonstrated resistance towards penicillin G. High resistance was shown against different heavy metals, with 90% (196/217), 88% (192/217), 86% (188/217) and 84% (183/217) of the isolates resistant to 1500 µg/mL concentration of Cadmium (Cd), Zinc (Zn), Lead (Pb) and Copper (Cu) respectively. A total of 10 antimicrobial resistance and virulence genetic determinants were screened for all livestock associated S. aureus isolates. Methicillin-resistant S. aureus (MRSA) isolates were identified, by the presence of mecC, in 27% of the isolates with a significant relationship (p < 0.001)) with the host animal. This is the first report of mecC positive LA-MRSA in South Africa and the African continent. The gene for tetracycline resistance (tetK) was the most frequently detected of the screened genes with an overall prevalence of 35% and the highest prevalence percentage was observed for goats (56.76%) followed by avian species (chicken, duck and wild birds) (42.5%). Virulence-associated genes were observed across all animal host species. The study reports the presence of luks/pv, a gene encoding the PVL toxin previously described to be a marker for community acquired-MRSA, suggesting the crossing of species between human and livestock. The high prevalence of S. aureus from the livestock indicates a major food security and healthcare threat. This threat is further compounded by the virulence of the pathogen, which causes numerous clinical manifestations. The phenomenon of co-selection is observed in this study as isolates exhibited resistance to both antibiotics and heavy metals. Further, all the screened antibiotic and heavy metal resistance genes did not correspond with the phenotypic resistance.

Sign in / Sign up

Export Citation Format

Share Document