scholarly journals Corrosion Behavior of a Pyrite and Arsenopyrite Galvanic Pair in the Presence of Sulfuric Acid, Ferric Ions and HQ0211 Bacterial Strain

Minerals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 169 ◽  
Author(s):  
Jia-Ning Xu ◽  
Wen-Ge Shi ◽  
Peng-Cheng Ma ◽  
Liang-Shan Lu ◽  
Gui-Min Chen ◽  
...  
Keyword(s):  
Corrosion Behavior ◽  
Open Circuit Potential ◽  
Electrochemical Impedance ◽  
Linear Sweep Voltammetry ◽  
Open Circuit ◽  
Ferric Ions ◽  
Linear Sweep ◽  
Gold Ores ◽  
Electrochemical Testing ◽  
Tafel Curve

In this paper, the galvanic effect of pyrite and arsenopyrite during the leaching pretreatment of gold ores was determined with the use of electrochemical testing (open circuit potential, linear sweep voltammetry, Tafel, and electrochemical impedance spectroscopy (EIS)) and frontier orbit calculations. The results show that (i) the linear sweep voltammetry curve and Tafel curve of the galvanic pair are similar to those of arsenopyrite, (ii) the corrosion behavior of the galvanic pair is consistent with that of arsenopyrite, and (iii) the galvanic effect promotes the corrosion of arsenopyrite by simultaneously increasing the cathode and anode currents and reducing oxidation resistance. The frontier orbit calculation explains the principle of the galvanic effect of pyrite and arsenopyrite from the view of quantum mechanics.

scholarly journals From Waste to Valuable Resource: Lignin as a Sustainable Anti-Corrosion Coating

Coatings ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 454 ◽  
Author(s):  
Arman Dastpak ◽  
Kirsi Yliniemi ◽  
Mariana de Oliveira Monteiro ◽  
Sarah Höhn ◽  
Sannakaisa Virtanen ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Open Circuit Potential ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Linear Sweep Voltammetry ◽  
Corrosion Current ◽  
Polymer Coatings ◽  
Open Circuit ◽  
Linear Sweep ◽  
Cyclic Potentiodynamic Polarization

In this study, a waste of biorefinery—lignin—is investigated as an anticorrosion coating on stainless steel. Corrosion behavior of two lignin types (hardwood beech and softwood spruce) was studied by electrochemical measurements (linear sweep voltammetry, open circuit potential, potentiostatic polarization, cyclic potentiodynamic polarization, and electrochemical impedance measurements) during exposure to simulated body fluid (SBF) or phosphate buffer (PBS). Results from linear sweep voltammetry of lignin-coated samples, in particular, demonstrated a reduction in corrosion current density between 1 and 3 orders of magnitude cf. blank stainless steel. Furthermore, results from cross cut adhesion tests on lignin-coated samples demonstrated that the best possible adhesion (grade 0) of ISO 2409 standard was achieved for the investigated novel coatings. Such findings suggest that lignin materials could transform the field of organic coatings towards more sustainable alternatives by replacing non-renewable polymer coatings.

Corrosion Resistance of Modified Silane Films Formed on AZ31 Magnesium Alloys

2011 ◽  
Vol 686 ◽  
pp. 21-25
Author(s):  
Xian Long Cao ◽  
Fu Sheng Pan ◽  
Hong Da Deng ◽  
Wei Cai
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Corrosion Behavior ◽  
Open Circuit Potential ◽  
Electrochemical Impedance ◽  
Open Circuit ◽  
Chloride Ions ◽  
Cerium Nitrate ◽  
Az31 Magnesium Alloy ◽  
Sodium Chloride Solutions

This present work investigated the corrosion behavior of AZ31 magnesium alloy substrates pre-treated with bis-[triethoxysilylpropyl] tetrasulfide silane modified with cerium nitrate. The corrosion behavior of the pre-treated substrates in 0.005M sodium chloride solutions was assessed by potentiodynamic polarization, open circuit potential and electrochemical impedance spectroscopy (EIS). The results showed that the silane pre-treatments improved the corrosion resistance of the AZ31 magnesium alloy substrates in the presence of chloride ions. Especially the addition of cerium nitrate played an important role in reducing the corrosion activity.

scholarly journals Corrosion Behavior of Some Timonb Alloys in Ringer Solution

2020 ◽  
Vol 71 (7) ◽  
pp. 187-196
Author(s):  
Maria Magdalena Pricopi ◽  
Romeu Chelariu ◽  
Nicolae Apostolescu ◽  
Doina-Margareta Gordin ◽  
Daniel Sutiman ◽  
...  
Keyword(s):  
Corrosion Behavior ◽  
Immersion Time ◽  
Open Circuit Potential ◽  
Electrochemical Impedance ◽  
Ph Value ◽  
Electrochemical Techniques ◽  
Ringer Solution ◽  
Open Circuit ◽  
Chemical Compositions ◽  
Solution Ph

The aim of this study was to investigate the influence of different process parameters as chemical composition, the pH value and immersion time on the corrosion of the some TiMoNb alloys, using different electrochemical techniques such as: cyclic voltammetry, open circuit potential (OCP) measurement, polarization curves and electrochemical impedance spectroscopy (EIS). The alloys were analyzed in the natural pH of the Ringer solution, but also with an acidic modification of the solution (ph = 4) and a basic modification (ph = 8). The more acidic values of pH, the more evident are differences between corrosion behavior of titanium-based alloys depending on their chemical compositions and immersion times.

scholarly journals BiVO4 Photoanode Synergistic with Persulfate to Degrade Antibiotics: Degradation Mechanism and Pathway

2021 ◽  
Author(s):  
Yun Chen ◽  
Jinquan Wan ◽  
Yongwen Ma ◽  
Yan Wang ◽  
Zhicheng Yan ◽  
...  
Keyword(s):  
Open Circuit Potential ◽  
Electrochemical Impedance ◽  
Degradation Mechanism ◽  
Linear Sweep Voltammetry ◽  
Treatment Method ◽  
Open Circuit ◽  
Minor Role ◽  
Kinetic Rate Constant ◽  
Kinetic Rate ◽  
A Minor

Abstract Antibiotics pose a great threat to ecological environment and human health, which should remove with an efficient innovative treatment method. Here in, a photoelectrocatalytic strategy for persulfate activation by BiVO4 photoanode had been systematically researched in this work. In the presence of PS, the degradation efficiency of sulfamethoxazole (SMX) reached to 97.3% within 100 min, whereas the kinetic rate constant was 0.0388 min− 1, which was about 7.05 times higher than no addition of PS (0.0055 min− 1). Open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV) were measured, suggesting that PS played a photoelectron acceptor for improving the separation of photogenerated holes and electrons and accelerating charge transfer. The radical quenching experiments and EPR tests indicated that holes and superoxide were dominant reactive oxidation species by directly oxidation pollutants. Indirect transfer pathway of S2O82− for producing hydroxyl radicals played a minor role, while only a small amount of sulfate radical was produced. Mixed pollutants with three antibiotics (ciprofloxacin (CIP), tetracycline (TC) and SMX) had been further degraded. Results showed that the degradation of SMX was inhibited in a content compared to a single pollutant, but both TC and CIP showed satisfactory removal effects, especially in natural water. Liquid chromatography-mass spectroscopy (LC-MS) was used to determine the intermediates of SMX (with 7 intermediates), CIP (with 11 intermediates) and TC (with 19 intermediates) in the PEC system. This work provides an eco-friendly and efficient method for antibiotic removal, which has good application prospect in the degradation of mixed pollutants.

scholarly journals Χαρακτηρισμός πολυμερικών επιστρώσεων με νανοπερίεκτες σε μέταλλα για την προστασία τους από διάβρωση σε θαλάσσιο περιβάλλον

2012 ◽  
Author(s):  
Ανδρόνικος Μπαλάσκας
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Open Circuit Potential ◽  
Electrochemical Impedance ◽  
Open Circuit ◽  
X Ray Diffraction ◽  
X Ray ◽  
Organically Modified Silicates ◽  
Organically Modified ◽  
Ft Ir ◽  
Scanningelectron Microscopy

Υβριδικές επιστρώσεις οργανικά τροποποιημένων πυριτικών ενώσεων και εποξειδικώνρητινών (Organically Modified Silicates, ORMOSILs – epoxy) εφαρμόστηκαν στο κράμααργιλίου 2024-Τ3 και σε γαλβανισμένο χάλυβα σε υψηλές θερμοκρασίες (Hot Dip GalvanizedSteel, HDGS) προκειμένου αυτές να προστατεύσουν τα υποστρώματα από τη διάβρωση. Για τηνβελτίωση της αντοχής των επιστρώσεων στην διάβρωση ενσωματώθηκαν στην πολυμερικήμήτρα νανοπεριέκτες από μολυβδαινικό δημήτριο (CeMo) και οξείδιο του τιτανίου (TiO2),καθώς και pH-ευαίσθητα οργανικά νανοδοχεία πληρωμένα με τους αναστολείς διάβρωσης 2-μερκαπτοβενζοθειαζόλιο, 8-υδροξυκινολίνη, 1H-βενζοτριαζολο-4-σουλφονικό οξύ καιεξαφλουοροτιτανικό οξύ.Οι υβριδικές επιστρώσεις εφαρμόστηκαν στο υπόστρωμα με τη διαδικασία εμβάπτισης.Η μορφολογία των επιστρώσεων εξετάστηκε με ηλεκτρονική μικροσκοπία σάρωσης (ScanningElectron Microscopy (SEM)). Η σύνθεση και η δομή τους μελετήθηκε με υπέρυθρηΦασματοσκοπία μετασχηματισμού Fourier (FT-IR) και με μικροανάλυση με φθορισμομετρίαακτίνων Χ (Energy Dispersive X-Ray Analysis (EDX)). H ηλεκτροχημική φασματοσκοπίασύνθετης αντίστασης (Electrochemical Impedance Spectroscopy, EIS), η dc-πόλωση (dcpolarization)και η μέτριση ανοικτού δυναμικού (open circuit potential, OCP) χρησιμοποιήθηκανγια την αξιολόγηση των αντι-διαβρωτικών ιδιοτήτων των επιστρώσεων. Τα αποτελέσματαέδειξαν ότι οι επιστρώσεις με πληρωμένα νανοδοχεία έχουν αυξημένες αντιδιαβρωτικέςιδιότητες συγκριτικά με τις υπόλοιπες επιστρώσεις εμφανίζοντας και ιδιότητες αυτο-θεραπείας.Τέλος, συντέθηκαν νανόσφαιρες οξειδίου του χαλκού (Cu2O), οι οποίεςχαρακτηρίστηκαν με SEM, ηλεκτρονική μικροσκοπία διερχόμενης δέσμης (ΤransmissionΕlectron Μicroscopy (TEM)) και περίθλαση ακτίνων Χ (X ray Diffraction (XRD)). Οινανόσφαιρες στη συνέχεια πληρώθηκαν με ουσίες που δρουν ως βιοκτόνα και ενσωματώθηκανσε βαφές εμπορίου και σε επιστρώσεις βασισμένες σε εποξειδικές ενώσεις και μελετήθηκε ηδράση τους ως αντιαποθετικά αντιδραστήρια. Τα αποτελέσματα έδειξαν ότι οι επιστρώσεις μεπληρωμένες νανόσφαιρες Cu2O είχαν μεγαλύτερη αποτελεσματικότητα σε σύγκριση με τιςβαφές εμπορίου με βιοκτόνα μετά από έκθεση σε θαλάσσιο περιβάλλον.

scholarly journals Corrosion of Mechanically Alloyed Nanostructured FeAl Intermetallic Powders

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
A. Torres-Islas ◽  
C. Carachure ◽  
S. Serna ◽  
B. Campillo ◽  
G. Rosas
Keyword(s):  
Corrosion Behavior ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Corrosion Current ◽  
Test Time ◽  
Uniform Corrosion ◽  
Mechanically Alloyed ◽  
Solution Ph ◽  
Surface Corrosion ◽  
Electrochemical Testing

The corrosion behavior of the Fe40Al60nanostructured intermetallic composition was studied using electrochemical impedance spectroscopy (EIS) and linear polarization resistance (LPR) techniques with an innovative electrochemical cell arrangement. The Fe40Al60(% at) intermetallic composition was obtained by mechanical alloying using elemental powders of Fe (99.99%) and Al (99.99%). All electrochemical testing was carried out in Fe40Al60particles that were in water with different pH values. Temperature and test time were also varied. The experimental data was analyzed as an indicator of the monitoring of the particle corrosion current densityicorr. Different oxide types that were formed at surface particle were found. These oxides promote two types of surface corrosion mechanisms: (i) diffusion and (ii) charge transfer mechanisms, which are a function oficorrbehavior of the solution, pH, temperature, and test time. The intermetallic was characterized before and after each test by transmission electron microscopy. Furthermore, the results show that at the surface particles uniform corrosion takes place. These results confirm that it is possible to sense the nanoparticle corrosion behavior by EIS and LPR conventional electrochemical techniques.

Prediction and Measurement of Corrosion Rates of Stainless Steel in Concentrated Sulfuric Acid

CORROSION ◽  
10.5006/0709 ◽  
2013 ◽  
Vol 69 (6) ◽  
pp. 543-550 ◽  
Author(s):  
S. Jones ◽  
K. Coley ◽  
J. Kish
Keyword(s):  
Stainless Steel ◽  
Sulfuric Acid ◽  
Corrosion Behavior ◽  
Electrochemical Behavior ◽  
Open Circuit Potential ◽  
Electrochemical Techniques ◽  
Open Circuit ◽  
Corrosion Rates ◽  
Transient Nature ◽  
Concentrated Sulfuric Acid

When exposed to concentrated sulfuric acid, stainless steel exhibits unique electrochemical behavior. This behavior can be observed as an oscillation in open-circuit potential between the active and passive states. The transient nature of the corrosion behavior under these conditions results in a distinct challenge for measuring and predicting corrosion rates. Using a series of commercial alloys with various nickel contents, this paper outlines the utilization of electrochemical experimentation to refine the prediction of corrosion rates. The paper also discusses some of the difficulties associated with many traditional electrochemical techniques such as potentiodynamic scans when used for characterizing systems that undergo oscillations in open-circuit potential.

scholarly journals Preparation and Electrochemical Characterization of Concrete Containing Microencapsulated Calcium Nitrate Corrosion Inhibitor

2019 ◽  
Vol 271 ◽  
pp. 07009
Author(s):  
Changkyu Kim ◽  
Reece Goldsberry ◽  
Ahmad Ivan Karayan ◽  
Jose Milla ◽  
Marwa Hassan ◽  
...  
Keyword(s):  
Corrosion Inhibitor ◽  
Open Circuit Potential ◽  
Concrete Beams ◽  
Electrochemical Impedance ◽  
Calcium Nitrate ◽  
Passive Layer ◽  
Open Circuit ◽  
Optimum Concentration ◽  
Cracked Concrete

We present the preparation and inhibition behavior of rebar in the presence of calcium nitrate (CN)-containing microcapsules with concentrations of 0.50, 2.00, and 5.00 wt.% in concrete. From both open circuit potential (OCP) and electrochemical impedance spectroscopy spectra, it was found that an addition of microcapsules containing CN corrosion inhibitor into concrete beams successfully repassivated or maintained the passivity of the rebar when the concrete was cracked. This corrosion inhibitor repassivated the rebar by forming a passive layer on the rebar surface under the crack. This repassivation process was evident by an increase of OCP values to more positive values or by stable OCP values at around -100 mV vs SCE. An increase in phase angle after corrosion activation for the sample with 2.00 wt.% microcapsule clearly showed this repassivation process. The optimum concentration for maintaining the passivity on rebar in the cracked concrete was found to be 5.00 wt.%.

scholarly journals Effects of chemical composition on the corrosion of dental alloys

2012 ◽  
Vol 23 (2) ◽  
pp. 141-148 ◽  
Author(s):  
Rodrigo Galo ◽  
Ricardo Faria Ribeiro ◽  
Renata Cristina Silveira Rodrigues ◽  
Luís Augusto Rocha ◽  
Maria da Glória Chiarello de Mattos
Keyword(s):  
Open Circuit Potential ◽  
Alloy Composition ◽  
Electrochemical Impedance ◽  
Artificial Saliva ◽  
Open Circuit ◽  
Dental Alloy ◽  
Dental Alloys ◽  
Nickel Ions ◽  
Ti Alloys ◽  
Oral Environment

The aim of this study was to determine the effect of the oral environment on the corrosion of dental alloys with different compositions, using electrochemical methods. The corrosion rates were obtained from the current-potential curves and electrochemical impedance spectroscopy (EIS). The effect of artificial saliva on the corrosion of dental alloys was dependent on alloy composition. Dissolution of the ions occurred in all tested dental alloys and the results were strongly dependent on the general alloy composition. Regarding the alloys containing nickel, the Ni-Cr and Ni-Cr-Ti alloys released 0.62 mg/L of Ni on average, while the Co-Cr dental alloy released ions between 0.01 and 0.03 mg/L of Co and Cr, respectively.The open-circuit potential stabilized at a higher level with lower deviation (standard deviation: Ni-Cr-6Ti = 32 mV/SCE and Co-Cr = 54 mV/SCE). The potenciodynamic curves of the dental alloys showed that the Ni-based dental alloy with >70 wt% of Ni had a similar curve and the Co-Cr dental alloy showed a low current density and hence a high resistance to corrosion compared with the Ni-based dental alloys. Some changes in microstructure were observed and this fact influenced the corrosion behavior for the alloys. The lower corrosion resistance also led to greater release of nickel ions to the medium. The quantity of Co ions released from the Co-Cr-Mo alloy was relatively small in the solutions. In addition, the quantity of Cr ions released into the artificial saliva from the Co-Cr alloy was lower than Cr release from the Ni-based dental alloys.

A Research on the Protective Performance of Green Organic Composite Coating on Vehicle Equipment

2013 ◽  
Vol 325-326 ◽  
pp. 79-82
Author(s):  
An Tao Xu ◽  
Bing Luo ◽  
Fan Zhang ◽  
Fu Jin ◽  
Yang Yang Liu
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Composite Coating ◽  
Research Method ◽  
Open Circuit Potential ◽  
Electrochemical Impedance ◽  
Open Circuit ◽  
Simulation Research ◽  
Damage Level ◽  
Damage Simulation ◽  
Protective Performance

By adopting coating damage simulation research method with open circuit potential and electrochemical impedance spectroscopy, the influence of different damage levels of green organic composite coating to its protective performance has been studied. The research found that the variation of open circuit potential partly reflected the damage level of the coating. When K is less than or equal to 0.04, the coating still has favorable protective performance, while K is higher than 16, the protective performance of the coating is basically unavailable, but when K falls in between, the protective performance of the coating is fair good.

Sign in / Sign up

Export Citation Format

Share Document