scholarly journals Formulation of Nanomicelles to Improve the Solubility and the Oral Absorption of Silymarin

Molecules ◽  
2019 ◽  
Vol 24 (9) ◽  
pp. 1688 ◽  
Author(s):  
Vieri Piazzini ◽  
Mario D’Ambrosio ◽  
Cristina Luceri ◽  
Lorenzo Cinci ◽  
Elisa Landucci ◽  
...  
Keyword(s):  
Encapsulation Efficiency ◽  
Oral Absorption ◽  
Drug Loading ◽  
Antioxidant Properties ◽  
Aqueous Solubility ◽  
Average Diameter ◽  
Critical Micellar Concentration ◽  
Polydispersity Index ◽  
Vitamin E Tpgs

Two novel nanomicellar formulations were developed to improve the poor aqueous solubility and the oral absorption of silymarin. Polymeric nanomicelles made of Soluplus and mixed nanomicelles combining Soluplus with d-α-tocopherol polyethylene glycol 1000 succinate (vitamin E TPGS) were prepared using the thin film method. Physicochemical parameters were investigated, in particular the average diameter, the homogeneity (expressed as polydispersity index), the zeta potential, the morphology, the encapsulation efficiency, the drug loading, the critical micellar concentration and the cloud point. The sizes of ~60 nm, the narrow size distribution (polydispersity index ≤0.1) and the encapsulation efficiency >92% indicated the high affinity between silymarin and the core of the nanomicelles. Solubility studies demonstrated that the solubility of silymarin increased by ~6-fold when loaded into nanomicelles. Furthermore, the physical and chemical parameters of SLM-loaded formulations stored at room temperature and in refrigerated conditions (4 °C) were monitored over three months. In vitro stability and release studies in media miming the physiological conditions were also performed. In addition, both formulations did not alter the antioxidant properties of silymarin as evidenced by the 1,1-Diphenyl-2-picrylhydrazyl radical (DPPH) assay. The potential of the nanomicelles to increase the intestinal absorption of silymarin was firstly investigated by the parallel artificial membrane permeability assay. Subsequently, transport studies employing Caco-2 cell line demonstrated that mixed nanomicelles statistically enhanced the permeability of silymarin compared to polymeric nanomicelles and unformulated extract. Finally, the uptake studies indicated that both nanomicellar formulations entered into Caco-2 cells via energy-dependent mechanisms.

In-Vitro and In-Vivo Evaluation of Supersaturable Self-Nanoemulsifying Drug Delivery System (SNEDDS) of Dutasteride

2020 ◽  
Vol 17 (1) ◽  
pp. 74-86 ◽  
Author(s):  
Poonguzhali Subramanian ◽  
P. S. Rajnikanth ◽  
Manish Kumar ◽  
Kumarappan Chidambram
Keyword(s):  
Drug Delivery ◽  
Drug Delivery System ◽  
Delivery System ◽  
Oral Absorption ◽  
Drug Loading ◽  
Methyl Cellulose ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
Drug Load

Objective: A novel, Supersaturable Self-Nanoemulsifying Drug Delivery System (S-SNEDDS) has been prepared to improve the Dutasteride's poor aqueous solubility. Methods: By adding Hydroxy Propyl Methyl Cellulose (HPMC) as a precipitation inhibitor to conventional SNEDDS, a supersaturable system was prepared. Firstly, the prepared SNEDDS played an important role in increasing the aqueous solubility and hence oral absorption due to nano-range size. Secondly, the S-SNEDDS found to be advantageous over SNEDDS for having a higher drug load and inhibition of dilution precipitation of Dutasteride. Formulated S-SNEDDS (F1-F9) ranged from 37.42 ± 1.02 to 68.92 ± 0.09 nm with PDI 0.219-0.34 and drug loading of over 95 percent. Results: The study of in-vitro dissolution revealed higher dissolution for S-SNEDDS compared to SNEDDS and Avodart soft gelatin capsule as a commercial product. In addition, higher absorption was observed for S-SNEDDS showing approximately 1.28 and 1.27 fold AUC (0-24h) and Cmax compared to commercial products. Therefore, S-SNEDDS has proven as a novel drug delivery system with a higher drug load, higher self-emulsification efficiency, higher stability, higher dissolution and pronounced absorption. Conclusion: In conclusion, S-SNEDDS could be a new emerging approach to enhance aqueous solubility in many folds for drugs belonging to BCS Class II and IV and thus absorption and oral bioavailability.

Photodynamic Treatment of Colorectal Cancer Using Chlorin e6-Loaded Poly(lactide-co-glycolide)- Based Nanoparticles

2021 ◽  
Vol 17 (10) ◽  
pp. 1939-1950
Author(s):  
Beibei Lin ◽  
Xuegu Xu ◽  
Xiaobi Zhang ◽  
Yinfei Yu ◽  
Xiaoling Wang
Keyword(s):  
Colorectal Cancer ◽  
Drug Loading ◽  
Average Diameter ◽  
Plga Nanoparticles ◽  
Chlorin E6 ◽  
Photodynamic Treatment ◽  
Hct 116 ◽  
Hct 116 Cells ◽  
The Stability

We prepared poly(lactide-co-glycolide) (PLGA) encapsulated with chlorin e6 (Ce6) in an effort to increase the stability and efficiency of photosensitizers for photodynamic therapy (PDT). We determined that Ce6-loaded PLGA nanoparticles (PLGA-Ce6 NPs) had drug-loading efficiency of 5%. The efficiency of encapsulation was 82%, the zeta potential was- 25 mV, and the average diameter was 130 nm. The encapsulation of Ce6 in PLGA nanoparticles showed excellent stability. The nanoparticles exhibited sustained Ce6 release profiles with 50% released at the end of 3 days, whereas free Ce6 showed rapid release within 1 day. Ce6 release patterns were controlled by encapsulation into PLGA. The uptake of PLGA-Ce6 NPs was significantly enhanced by endocytosis in the first 8 hours in the HCT-116 cell line. An intracellular reactive oxygen species assay revealed the enhanced uptake of the nanoparticles. An in vitro anti-tumor activity assay showed that the PLGA-Ce6 NPs exhibited enhanced phototoxicity toward HCT-116 cells and a slightly lower IC50 value in HCT-116 cells than Ce6 solution alone. Exposure of HCT-116 cell spheroids to PLGA-Ce6 NPs penetrated more profoundly and had better phototoxicity than pure drugs. These findings suggest that PLGA-Ce6 NPs might serve as PDT for colorectal cancer.

scholarly journals Synthesis, Characterization, and Evaluation of Radical Scavenging Ability of Ellagic Acid-Loaded Nanogels

2011 ◽  
Vol 2011 ◽  
pp. 1-9 ◽  
Author(s):  
Gautam Behl ◽  
Monal Sharma ◽  
Saurabh Dahiya ◽  
Aruna Chhikara ◽  
Madhu Chopra
Keyword(s):  
Ellagic Acid ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Radical Scavenging ◽  
Aqueous Solubility ◽  
Loading Level ◽  
Human Cervical Cancer Cell ◽  
Poly Ethylene ◽  
Radical Scavenging Ability ◽  
Acid Loading

Ellagic acid (EA), a potential antioxidant phytochemical has low aqueous solubility and bioavailability. In this paper, encapsulation of ellagic acid has been carried out into the biodegradable disulfide crosslinked poly (ethylene glycol) PEO-based nanogels synthesized via AGET (activator generated electron transfer) ATRP (atom transfer radical polymerization), and their radical scavenging ability was evaluated. The encapsulation of the EA was carried out at two drug loading percentages, that is, 10 and 20 wt.% of the nanogels. 1,1-Diphenyl-2-picryldrazyl (DPPH) assay was utilized in order to assess the radical scavenging ability of the ellagic acid-loaded nanogels. A drug-loading level of about 2.5 wt.% was achieved with encapsulation efficiency of about 25% at 10 wt.% of the EA w.r.t nanogels, which was found to increase to about 4.7 wt.% with decreased encapsulation efficiency of 23.5% as EA content was increased to 20wt.% of the nanogels. Ellagic acid loading was found to be accompanied with increase in the size of the nanogels from144.6±39.52 nm for neat nanogels to217.8±105.5and633±160.1 nm at 2.5 and 4.7 wt.% drug loading level. The nanogels were found to be capable of scavenging radicals and biocompatible on human cervical cancer cell lines (HeLa cells) at appropriate concentrations.

scholarly journals Annatto Oil Loaded Nanostructured Lipid Carriers: A Potential New Treatment for Cutaneous Leishmaniasis

Pharmaceutics ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1912
Author(s):  
Marianna Araújo Ferreira ◽  
Renato Ferreira de Almeida Júnior ◽  
Thiago Souza Onofre ◽  
Bruna Renata Casadei ◽  
Kleber Juvenal Silva Farias ◽  
...  
Keyword(s):  
Leishmania Major ◽  
Pure Water ◽  
Thermal Analyses ◽  
Antioxidant Properties ◽  
Average Diameter ◽  
Nanostructured Lipid Carrier ◽  
Bixa Orellana ◽  
Paramagnetic Resonance ◽  
3T3 Fibroblasts

Annatto (Bixa orellana L.) is extensively used as food pigment worldwide. Recently, several studies have found it to have healing and antioxidant properties, as well as effective action against leishmaniasis. Therefore, the purpose of this study was to incorporate the oil obtained from annatto seeds into a nanostructured lipid carrier (NLC) and evaluate its physicochemical properties and biological activity against Leishmania major. Nanoparticles were prepared by the fusion-emulsification and ultrasonication method, with the components Synperonic™ PE (PL) as the surfactant, cetyl palmitate (CP) or myristyl myristate (MM) as solid lipids, annatto oil (AO) (2% and 4%, w/w) as liquid lipid and active ingredient, and ultra-pure water. Physicochemical and biological characterizations were carried out to describe the NLCs, including particle size, polydispersity index (PDI), and zeta potential (ZP) by dynamic light scattering (DLS), encapsulation efficiency (EE%), thermal behavior, X-ray diffraction (XRD), transmission electron microscopy (TEM), Electron Paramagnetic Resonance (EPR), cytotoxicity on BALB/c 3T3 fibroblasts and immortalized human keratinocyte cells, and anti-leishmaniasis activity in vitro. Nanoparticles presented an average diameter of ~200 nm (confirmed by TEM results), a PDI of less than 0.30, ZP between −12.6 and −31.2 mV, and more than 50% of AO encapsulated in NLCs. Thermal analyses demonstrated that the systems were stable at high temperatures with a decrease in crystalline structure due to the presence of AOs (confirmed by XRD). In vitro, the anti-leishmania test displayed good activity in encapsulating AO against L. major. The results indicate that the oily fraction of Bixa orellana L. in NLC systems should be evaluated as a potential therapeutic agent against leishmaniasis.

scholarly journals Sodium Alginate Nanoparticles of Isoniazid: Preparation and Evaluation

2019 ◽  
Vol 11 (06) ◽  
Author(s):  
Sumit Kumar ◽  
Dinesh Chandra Bhatt
Keyword(s):  
Particle Size ◽  
Sodium Alginate ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Average Particle Size ◽  
Average Particle ◽  
In Vitro Drug Release ◽  
Ionotropic Gelation ◽  
Preparation And Evaluation

Fabrication and evaluation of the Isoniazid loaded sodium alginate nanoparticles (NPs) was main objective of current investigation. These NPs were engineered using ionotropic gelation technique. The NPs fabricated, were evaluated for average particle size, encapsulation efficiency, drug loading, and FTIR spectroscopy along with in vitro drug release. The particle size, drug loading and encapsulation efficiency of fabricated nanoparticles were ranging from 230.7 to 532.1 nm, 5.88% to 11.37% and 30.29% to 59.70% respectively. Amongst all batches studied formulation F-8 showed the best sustained release of drug at the end of 24 hours.

Preparation, Characterization and Properties Evaluation of Buprofezin Nanocomposites Obtained by Polyelectrolytes Assembly

2011 ◽  
Vol 183-185 ◽  
pp. 1677-1681 ◽  
Author(s):  
Zhe Zhang ◽  
De Fu Chi ◽  
Jia Yu
Keyword(s):  
Laser Scanning ◽  
Orthogonal Experiment ◽  
Drug Loading ◽  
In Vitro Release ◽  
Average Diameter ◽  
Laser Scanning Microscopy ◽  
Release Time ◽  
Confocal Laser ◽  
Layer By Layer

Buprofezin (BPF) microcrystals were directly encapsulated with nature polysaccharides chitosan (CHI) and sodium alginate (ALG) through layer-by-layer (LbL) self-assembly. The coated colloids were characterized using confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). The surface of the coated microcrystal was smoothened and the coating was uniform. Different concentrations of the ALG, CHI, BPF and CaCl2 were selected as the influencing factors, and then, the microcapsules were optimized by orthogonal experiment. The size distribution of microcapsules was determined by Laser Diffraction Size Analyzer. It showed statistically normal distribution. The average diameter of BPF was 1.5m. The encapsulation efficiency of the BPF loaded microparticles was about 67.2±0.73%. The drug loading content was about 66.7±0.31% after encapsulated. The in vitro release experiments revealed that the polyelectrolytes prolonged the release time of the encapsulated BPF microcrystals.

scholarly journals Evaluation of physicochemical and antioxidant properties of nanosized copolymeric micelles loaded with kaempferol

Pharmacia ◽  
2020 ◽  
Vol 67 (2) ◽  
pp. 49-54
Author(s):  
Krassimira Yoncheva ◽  
Nadia Hristova-Avakumova ◽  
Vera Hadjimitova ◽  
Trayko Traykov ◽  
Petar Petrov
Keyword(s):  
Antioxidant Activity ◽  
Propylene Oxide ◽  
Encapsulation Efficiency ◽  
Antioxidant Properties ◽  
In Vitro Release ◽  
Before And After ◽  
Poly Propylene ◽  
Vitro Release

The study was focused on the evaluation of two copolymers as micellar carriers for kaempferol delivery. The copolymers comprised identical hydrophilic blocks of poly(2-(dimethylamino)ethyl methacrylate and different hydrophobic blocks of either poly(ε-caprolactone) (PDMAEMA9-b-PCL70-b-PDMAEMA9) or poly(propylene oxide) (PDMAEMA13-b-PPO69-b-PDMAEMA13). The calculation of Flory-Huggins parameters and determination of encapsulation efficiency showed that PDMAEMA-b-PCL-b-PDMAEMA copolymer possessed higher capacity for kaempferol loading. The diameter of the micelles before and after lyophilization was not changed, suggesting that the micelles could be lyophilized and redispersed before administration. The in vitro release of kaempferol from PDMAEMA-b-PPO-b-PDMAEMA micelles was faster than the release from PDMAEMA-b-PCL-b-PDMAEMA micelles, probably due to the higher affinity of kaempferol to this copolymer. Further, the higher affinity resulted in a retention of antioxidant activity of kaempferol in the presence of DPPH and KO2 radicals. Thus, PDMAEMA-PCL-PDMAEMA was considered more appropriate carrier because of the higher encapsulation efficiency and preservation of antioxidant activity of the drug.

scholarly journals Formulation of Solid Lipid Nanoparticles of Cilnidipine for the Treatment of Hypertension

2019 ◽  
Vol 9 (3) ◽  
pp. 212-221 ◽  
Author(s):  
Aparna Bhalerao ◽  
Pankaj Prakash Chaudhari
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Encapsulation Efficiency ◽  
Drug Loading ◽  
Lipid Nanoparticles ◽  
Water Soluble ◽  
Solid Lipid Nanoparticle ◽  
Solid Lipid ◽  
Lipid Nanoparticle

Cilinidipine is a fourth generation N and L-type calcium channel antagonists used alone or in combination with another drug to treat hypertension. Cilnidipine is poorly water -soluble, BCS class II drug with 6 to 30 percent oral bioavailability due to first pass metabolism. So to protect the drug from degradation and improve its dissolution, solid lipid nanoparticles were prepared. Glyceryl monostearate was selected as lipid while span 20: tween 20 were selected as surfactant blends. The formulations were evaluated for various parameters, as percent transmittance, drug content, percent encapsulation efficiency; percent drug loading, In vitro drug release and particle size. Optimized formulation was lyophilized using lactose as a cryo-protectant. The lyophilized formulation was evaluated for micromeritic properties, particle size and in vitro dissolution. It was further evaluated for DSC, XRD, and SEM. Percent encapsulation efficiency and percent drug loading of optimized formulation (F3) were 78.66percent and 9.44percent respectively. The particle size of F3 formulation without drug was 204 nm and with the drug was 214 nm. The particle size of the reconstituted SLN was 219 nm. In DSC study, no obvious peaks for cilnidipine were found in the SLN of cilnidipine indicated that the cilnidipine must be present in a molecularly dissolved state in SLN. In X-ray diffractometry absence of peaks representing crystals of cilnidipine in SLN indicated that the drug was in an amorphous or disordered crystalline phase in the lipid matrix. Thus, solid lipid nanoparticle formulation is a promising way to enhance the dissolution rate of cilnidipine. Keywords: Cilnidipine, Solid Lipid Nanoparticle, Hypertension

Development of Apigenin-Loaded Niosomes Using Ecological Probe Sonication Technique for enhanced oral delivery: Application of Box-Behnken Design

2021 ◽  
Vol 22 ◽  
Author(s):  
Md. Ali Mujtaba
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Oral Delivery ◽  
Aqueous Solubility ◽  
Polydispersity Index ◽  
Antioxidant Potential ◽  
Box Behnken Design ◽  
Sonication Technique ◽  
Probe Sonication

Background: Apigenin (APG), a natural bioactive flavonoid, has multiple pharmacological effects. However, its poor aqueous solubility hinders its clinical benefits. Objective and Methods: The work aimed to develop novel apigenin-loaded niosomes (APG-NIO) with ecological probe sonication techniques. The formulation was statistically optimized by Box-Behnken design (BBD), and the independent variables were selected as Span 80 (X1), Poloxamer 188 (X2), and Tween 80 (X3) at three levels, and the dependent variables were identified as: particle size (Y1), polydispersity index (Y2), and % entrapment efficiency (Y3). The formulation was characterized for various parameters such as vesicle shape, size, PDI, %EE, solubility, in vitro drug release, and antioxidant potential. Results: The optimized APG-NIO formulation was found to have a spherical shape with homogenous distribution and a low polydispersity index. It has a particle size of 425.77 nm, zeta potential -17.1±0.9 mV, and %EE of 89.63. The aqueous solubility of APG-NIO was found approximately 45 times higher than that of pure APG. The formulation showed a higher drug release rate as compared to pure APG in phosphate buffer pH 7.4 and followed the Higuchi release model with a non-Fickian transport mechanism. The stability was found at 4°C for 3 months. The antioxidant potential of APG-NIO was significantly increased in comparison to the pure drug suspension in the DPPH• assay. Conclusion: These findings suggest that the probe sonication technique is an alternative, cost-effective, simple, and green method for the development of niosomes, and BBD is a useful optimization tool for identifying the effect of formulation variables.

Preparation and Characterization of Cyclophosphamide-Loaded Chitosan Microspheres

2012 ◽  
Vol 621 ◽  
pp. 130-133
Author(s):  
Yi Lin Ding ◽  
Su Su Ding ◽  
Guo Fang Ding
Keyword(s):  
Drug Release ◽  
Anticancer Agent ◽  
Loading Rate ◽  
Drug Loading ◽  
Average Diameter ◽  
Uv Spectrophotometry ◽  
Chitosan Microspheres ◽  
Dialysis Bag

Chitosan microspheres were prepared by using a cross linking agent combined with an emulsion technique. Cyclophosphamide was loaded as an anticancer agent. Obtained microspheres were spherical and regular, with a smooth surface morphology, having an average diameter of 15.7±9.0μm. After preparation, the drug-loading rate and entrapment rate of cyclophosphamide was investigated by UV spectrophotometry. Drug release was tested in vitro in a dynamic dialysis system with a dialysis bag. The chitosan microspheres prepared were proved to have good drug release profiles.

Sign in / Sign up

Export Citation Format

Share Document