scholarly journals The Influence of the Preparation Method on the Physico-Chemical Properties and Catalytic Activities of Ce-Modified LDH Structures Used as Catalysts in Condensation Reactions

Molecules ◽  
2021 ◽  
Vol 26 (20) ◽  
pp. 6191
Author(s):  
Alexandra-Elisabeta Stamate ◽  
Rodica Zăvoianu ◽  
Octavian Dumitru Pavel ◽  
Ruxandra Birjega ◽  
Andreea Matei ◽  
...  

Mechanical activation and mechanochemical reactions are the subjects of mechanochemistry, a special branch of chemistry studied intensively since the 19th century. Herein, we comparably describe two synthesis methods used to obtain the following layered double hydroxide doped with cerium, Mg3Al0.75Ce0.25(OH)8(CO3)0.5·2H2O: the mechanochemical route and the co-precipitation method, respectively. The influence of the preparation method on the physico-chemical properties as determined by multiple techniques such as XRD, SEM, EDS, XPS, DRIFT, RAMAN, DR-UV-VIS, basicity, acidity, real/bulk densities, and BET measurements was also analyzed. The obtained samples, abbreviated HTCe-PP (prepared by co-precipitation) and HTCe-MC (prepared by mechanochemical method), and their corresponding mixed oxides, Ce-PP (resulting from HTCe-PP) and Ce-MC (resulting from HTCe-MC), were used as base catalysts in the self-condensation reaction of cyclohexanone and two Claisen–Schmidt condensations, which involve the reaction between an aromatic aldehyde and a ketone, at different molar ratios to synthesize compounds with significant biologic activity from the flavonoid family, namely chalcone (1,3-diphenyl-2-propen-1-one) and flavone (2-phenyl-4H-1benzoxiran-4-one). The mechanochemical route was shown to have indisputable advantages over the co-precipitation method for both the catalytic activity of the solids and the costs.

2021 ◽  
Vol 21 (12) ◽  
pp. 5896-5905
Author(s):  
Radha Ahuja ◽  
Anjali Sidhu ◽  
Anju Bala

Nanotechnology has the ability to produce novel nano-sized materials with excellent physical and chemical properties to act against phytopathogenic diseases, essential for revolution of agriculture and food industry. The development of facile, reliable and eco-friendly processes for the synthesis of biologically active nanomaterials is an important aspect of nanotechnology. In the present paper, we attempted to compare sonochemical and co-precipitation method for the synthesis of metal sulfide nanoparticles (MS-NPs) for their structural and antifungal properties against various phytopathogenic fungi of rice. The preparation of nanospheres (NSs) and nano rods (NRs) of CuS, FeS and MnS was monitored by UV-Visible spectroscopy complemented by transmission electron microscope (TEM), scanning electron microscope (SEM), atomic force microscopy (AFM), dynamic light scattering (DLS) and Zeta potential analyser. Sonochemical method resulted in formation of spherical shaped nanoparticles of size (7–120 nm), smaller than those of nanorods (50–200 nm) prepared by co-precipitation produced. It was observed that the metal sulfide nanospheres exhibited a better antifungal potential against D. oryzae, C. lunata and S. oryzae as compared to rod shaped metal sulfide nanoparticles. Smaller size and large surface area of spherical shaped particles opens up an important perspective of the prepared MS-NPs.


2020 ◽  
Vol 27 (28) ◽  
pp. 4584-4592 ◽  
Author(s):  
Avik Khan ◽  
Baobin Wang ◽  
Yonghao Ni

Regenerative medicine represents an emerging multidisciplinary field that brings together engineering methods and complexity of life sciences into a unified fundamental understanding of structure-property relationship in micro/nano environment to develop the next generation of scaffolds and hydrogels to restore or improve tissue functions. Chitosan has several unique physico-chemical properties that make it a highly desirable polysaccharide for various applications such as, biomedical, food, nutraceutical, agriculture, packaging, coating, etc. However, the utilization of chitosan in regenerative medicine is often limited due to its inadequate mechanical, barrier and thermal properties. Cellulosic nanomaterials (CNs), owing to their exceptional mechanical strength, ease of chemical modification, biocompatibility and favorable interaction with chitosan, represent an attractive candidate for the fabrication of chitosan/ CNs scaffolds and hydrogels. The unique mechanical and biological properties of the chitosan/CNs bio-nanocomposite make them a material of choice for the development of next generation bio-scaffolds and hydrogels for regenerative medicine applications. In this review, we have summarized the preparation method, mechanical properties, morphology, cytotoxicity/ biocompatibility of chitosan/CNs nanocomposites for regenerative medicine applications, which comprises tissue engineering and wound dressing applications.


1986 ◽  
Vol 51 (10) ◽  
pp. 2098-2108 ◽  
Author(s):  
Milan Pospíšil ◽  
Jan Topinka

We investigated the effect of origin and some physico-chemical parameters on the kinetics of reduction with hydrogen of two series of mixed NiO-Fe2O3 oxides differing by their composition, the character of their precursors (mixed crystalline nitrates and coprecipitated hydroxides) and their decomposition temperature.This effect manifested itself by different magnitudes of specific surfaces of the mixed oxides and coherent regions of present phases as well as by different oxidizing abilities of the surface and differences in morphology and phase composition of corresponding samples in both series investigated. Nonlinear or nonmonotonous composition dependences of physico-chemical parameters investigated point to a mutual influence of individual components, which is also a function of the system origin and which modifies its reactivity during its reduction with hydrogen. The kinetics of the reduction was studied thermogravimetrically at 320-410 °C. The reduction of oxides of the hydroxide origin is catalytically accelerated by primarily reduced nickel, whereas in corresponding samples of the nitrate series, the total NiO is bound to the spinel phase and the reduction is delayed. Experimental IR spectra, the effect of preliminary annealing and DTA of the mixed oxides point to an inhibitory effect of water, which is constitutionally bound in trace admixtures of the goethite phase, on the kinetics of reduction of samples in the hydroxide series.


MRS Advances ◽  
2017 ◽  
Vol 2 (64) ◽  
pp. 4025-4030 ◽  
Author(s):  
T. Kryshtab ◽  
H. A. Calderon ◽  
A. Kryvko

ABSTRACTThe microstructure of Ni-Mg-Al mixed oxides obtained by thermal decomposition of hydrotalcite-like compounds synthesized by a co-precipitation method has been studied by using X-ray diffraction (XRD) and atomic resolution transmission electron microscopy (TEM). XRD patterns revealed the formation of NixMg1-xO (x=0÷1), α-Al2O3 and traces of MgAl2O4 and NiAl2O4 phases. The peaks profile analysis indicated a small grain size, microdeformations and partial overlapping of peaks due to phases with different, but similar interplanar spacings. The microdeformations point out the presence of dislocations and the peaks shift associated with the presence of excess vacancies. The use of atomic resolution TEM made it possible to identify the phases, directly observe dislocations and demonstrate the vacancies excess. Atomic resolution TEM is achieved by applying an Exit Wave Reconstruction procedure with 40 low dose images taken at different defocus. The current results suggest that vacancies of metals are predominant in MgO (NiO) crystals and that vacancies of Oxygen are predominant in Al2O3 crystals.


2016 ◽  
Vol 875 ◽  
pp. 24-44
Author(s):  
Ming Guo Ma ◽  
Shan Liu ◽  
Lian Hua Fu

CaCO3 has six polymorphs such as vaterite, aragonite, calcite, amorphous, crystalline monohydrate, and hexahydrate CaCO3. CaCO3 is a typical biomineral that is abundant in both organisms and nature and has important industrial applications. Cellulose could be used as feedstocks for producing biofuels, bio-based chemicals, and high value-added bio-based materials. In the past, more attentions have been paid to the synthesis and applications of CaCO3 and cellulose/CaCO3 nanocomposites due to its relating properties such as mechanical strength, biocompatibility, and biodegradation, and bioactivity, and potential applications including biomedical, antibacterial, and water pretreatment fields as functional materials. A variety of synthesis methods such as the hydrothermal/solvothermal method, biomimetic mineralization method, microwave-assisted method, (co-) precipitation method, and sonochemistry method, were employed to the preparation of CaCO3 and cellulose/CaCO3 nanocomposites. In this chapter, the recent development of CaCO3 and cellulose/CaCO3 nanocomposites has been reviewed. The synthesis, characterization, and biomedical applications of CaCO3 and cellulose/CaCO3 nanocomposites are summarized. The future developments of CaCO3 and cellulose/CaCO3 nanocomposites are also suggested.


2015 ◽  
Vol 1088 ◽  
pp. 371-376 ◽  
Author(s):  
Xia Zhang ◽  
Cui Xia Yan ◽  
Rong Feng Guan

Spherical YAG:Ce3+phosphors were synthesized by three different routes namely sol-gel method, co-precipitation method and solvethermal method. The microstructure, crystallization and luminescent properties of the phosphors were studied in order to find the best processing parameter for spherical shape and good luminescence properties of YAG:Ce3+phosphor. Adding citric acid to the precursor solution resulted in the formation of spherical particles in sol-gel method. YAG:Ce3+phosphor made by co-precipitation method was separated with PEG2000, and its spherical particles of size was around 500nm. The hydro-thermal method could get perfect spherical appearance, but it needed heat treatment improve the luminescence property.


2016 ◽  
Vol 6 (23) ◽  
pp. 8222-8233 ◽  
Author(s):  
Yujie Xie ◽  
Yun Guo ◽  
Yanglong Guo ◽  
Li Wang ◽  
Wangcheng Zhan ◽  
...  

The La0.4–MnOx catalyst prepared by using the co-precipitation method exhibited excellent activity and thermal stability for propane deep oxidation.


2017 ◽  
Vol 19 (4) ◽  
pp. 996-1004 ◽  
Author(s):  
Xuewang Han ◽  
Chaoqun Li ◽  
Xiaohui Liu ◽  
Qineng Xia ◽  
Yanqin Wang

Non-noble metal catalysts, MnOx–CeO2 mixed oxides, were prepared by a co-precipitation method and used in the direct aerobic oxidation of HMF to FDCA, showing excellent catalystic activity and stability.


2011 ◽  
Vol 396-398 ◽  
pp. 764-767
Author(s):  
Tai Xuan Jia ◽  
Ji Chang Zhang ◽  
Zi Li Liu

Y-Mg-Al-layered double Oxides (Y-Mg-Al-LDO) were prepared by calcining Y3+-doped Mg-Al-layered hydrotalcites at 823 K for 8 h from co-precipitation method. The samples were detected by XRD and CO2-TPD. Micro-structure and essential regularity were disclosed. The acetone condensation reaction as a probe reaction was carried on fixed-bed micro-reactor at reactive temperature 673 K, reactive time 3 h and liquid hourly space velocity (LHSV) 6 h-1 over Y-Mg-Al-LDO. The catalyst evaluation results show that Y-Mg-Al-LDO possess high catalytic activity. The maximum value of acetone conversion reached 37.53%. The selectivity and single-pass-yield of isophorone were 55.66% and 20.89%, respectively.


Sign in / Sign up

Export Citation Format

Share Document