scholarly journals Exploring the Interfacial Phase and π–π Stacking in Aligned Carbon Nanotube/Polyimide Nanocomposites

Nanomaterials ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 1158
Author(s):  
Qian Jiang ◽  
Qian Zhang ◽  
Xianyan Wu ◽  
Liwei Wu ◽  
Jia-Horng Lin
Keyword(s):  
Carbon Nanotube ◽  
Conjugated Polymer ◽  
Emission Spectroscopy ◽  
Fluorescence Emission ◽  
Interfacial Microstructure ◽  
Phase System ◽  
X Ray Diffraction ◽  
X Ray ◽  
Π Stacking ◽  
Fluorescence Emission Spectroscopy

To characterize the interfacial microstructure and interaction at a nanoscale has a significant meaning for the interface improvement of the nanocomposites. In this study, the interfacial microstructure and features of aligned multiwalled carbon nanotube (MWNT) and conjugated polymer polyimide (PI) with three molecular structures were investigated using small-angle X-ray scattering (SAXS), wide-angle X-ray diffraction (WAXD), and fluorescence emission spectroscopy. It was found that aligned MWNT/PI nanocomposites had a nonideal two-phase system with the interfaces belonging to long period stacking ordered structure. Attributed to the π–π stacking effect, MWNT/BTDA-MPD presented the most regular arrangement verified by fractal dimension. By adopting a one-dimension correlation function, each phase dimension in aligned MWNT/PI nanocomposites was calculated and verified by high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The π–π stacking was demonstrated to be an important interaction between MWNT and PI via WAXD and fluorescence emission spectroscopy, and it was influenced by the linkage bond between benzene rings in PIs. This work is of significance to reveal the interfacial features between conjugated polymer and carbon nanotubes (CNTs), which is favorable for the interface design of CNT-based high performance nanocomposites.

Self-Recognizing π-π Stacking Interactions Designed for the Generation of Ultrastable Mesoporous Hydrogen-Bonded Organic Frameworks

2019 ◽  
Author(s):  
KAIKAI MA ◽  
Peng Li ◽  
John Xin ◽  
Yongwei Chen ◽  
Zhijie Chen ◽  
...  
Keyword(s):  
Pore Size ◽  
Fiber Composite ◽  
Aqueous Media ◽  
Stacking Interactions ◽  
Mustard Gas ◽  
X Ray Diffraction ◽  
X Ray ◽  
Expansion Strategy ◽  
Π Stacking ◽  
Hydrogen Bonded

Creating crystalline porous materials with large pores is typically challenging due to undesired interpen-etration, staggered stacking, or weakened framework stability. Here, we report a pore size expansion strategy by self-recognizing π-π stacking interactions in a series of two-dimensional (2D) hydrogen–bonded organic frameworks (HOFs), HOF-10x (x=0,1,2), self-assembled from pyrene-based tectons with systematic elongation of π-conjugated molecular arms. This strategy successfully avoids interpene-tration or staggered stacking and expands the pore size of HOF materials to access mesoporous HOF-102, which features a surface area of ~ 2,500 m2/g and the largest pore volume (1.3 cm3/g) to date among all reported HOFs. More importantly, HOF-102 shows significantly enhanced thermal and chemical stability as evidenced by powder x-ray diffraction and N2 isotherms after treatments in chal-lenging conditions. Such stability enables the adsorption of dyes and cytochrome c from aqueous media by HOF-102 and affords a processible HOF-102/fiber composite for the efficient photochemical detox-ification of a mustard gas simulant.

scholarly journals Photoluminescent Properties of Hydroxyapatite and Hydroxyapatite/Multi-Walled Carbon Nanotube Composites

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 832
Author(s):  
Edna X. Figueroa-Rosales ◽  
Javier Martínez-Juárez ◽  
Esmeralda García-Díaz ◽  
Daniel Hernández-Cruz ◽  
Sergio A. Sabinas-Hernández ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Hexagonal Phase ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Multi Walled Carbon Nanotube ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites ◽  
Co Precipitation ◽  
Functionalized Mwcnts

Hydroxyapatite (HAp) and hydroxyapatite/multi-walled carbon nanotube (MWCNT) composites were obtained by the co-precipitation method, followed by ultrasound-assisted and microwave radiation and thermal treatment at 250 °C. X-ray diffraction (XRD) confirmed the presence of a hexagonal phase in all the samples, while Fourier-transform infrared (FTIR) spectroscopy elucidated the interaction between HAp and MWCNTs. The photoluminescent technique revealed that HAp and the composite with non-functionalized MWCNTs present a blue luminescence, while the composite with functionalized MWCNTs, under UV-vis radiation shows an intense white emission. These findings allowed presentation of a proposal for the use of HAp and HAp with functionalized MWCNTs as potential materials for optoelectronic and medical applications.

scholarly journals Isomeric 4,2′:6′,4″- and 3,2′:6′,3″-Terpyridines with Isomeric 4′-Trifluoromethylphenyl Substituents: Effects on the Assembly of Coordination Polymers with [Cu(hfacac)2] (Hhfacac = Hexafluoropentane-2,4-dione)

Inorganics ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 54
Author(s):  
Giacomo Manfroni ◽  
Simona S. Capomolla ◽  
Alessandro Prescimone ◽  
Edwin C. Constable ◽  
Catherine E. Housecroft
Keyword(s):  
Coordination Polymers ◽  
Metal Binding ◽  
Polymer Chains ◽  
Stacking Interactions ◽  
X Ray Diffraction ◽  
Preparative Scale ◽  
X Ray ◽  
Single Crystal Structures ◽  
Π Stacking ◽  
Packing Interactions

The isomers 4′-(4-(trifluoromethyl)phenyl)-4,2′:6′,4″-terpyridine (1), 4′-(3-(trifluoromethyl)phenyl)-4,2′:6′,4″-terpyridine (2), 4′-(4-(trifluoromethyl)phenyl)-3,2′:6′,3″-terpyridine (3), and 4′-(3-(trifluoromethyl)phenyl)-3,2′:6′,3″-terpyridine (4) have been prepared and characterized. The single crystal structures of 1 and 2 were determined. The 1D-polymers [Cu2(hfacac)4(1)2]n.2nC6H4Cl2 (Hhfacac = 1,1,1,5,5,5-hexafluoropentane-2,4-dione), [Cu(hfacac)2(2)]n.2nC6H5Me, [Cu2(hfacac)4(3)2]n.nC6H4Cl2, [Cu2(hfacac)4(3)2]n.nC6H5Cl, and [Cu(hfacac)2(4)]n.nC6H5Cl have been formed by reactions of 1, 2, 3 and 4 with [Cu(hfacac)2].H2O under conditions of crystal growth by layering and four of these coordination polymers have been formed on a preparative scale. [Cu2(hfacac)4(1)2]n.2nC6H4Cl2 and [Cu(hfacac)2(2)]n.2nC6H5Me are zig-zag chains and the different substitution position of the CF3 group in 1 and 2 does not affect this motif. Packing of the polymer chains is governed mainly by C–F...F–C contacts, and there are no inter-polymer π-stacking interactions. The conformation of the 3,2′:6′,3″-tpy unit in [Cu2(hfacac)4(3)2]n.nC6H4Cl2 and [Cu(hfacac)2(4)]n.nC6H5Cl differs, leading to different structural motifs in the 1D-polymer backbones. In [Cu(hfacac)2(4)]n.nC6H5Cl, the peripheral 3-CF3C6H4 unit is accommodated in a pocket between two {Cu(hfacac)2} units and engages in four C–Hphenyl...F–Chfacac contacts which lock the phenylpyridine unit in a near planar conformation. In [Cu2(hfacac)4(3)2]n.nC6H4Cl2 and [Cu(hfacac)2(4)]n.nC6H5Cl, π-stacking interactions between 4′-trifluoromethylphenyl-3,2′:6′,3″-tpy domains are key packing interactions, and this contrasts with the packing of polymers incorporating 1 and 2. We use powder X-ray diffraction to demonstrate that the assemblies of the coordination polymers are reproducible, and that a switch from a 4,2′:6′,4″- to 3,2′:6′,3″-tpy metal-binding unit is accompanied by a change from dominant C–F...F–C and C–F...H–C contacts to π-stacking of arene domains between ligands 3 or 4.

scholarly journals Structural and Raman Vibrational Studies ofCeO2-Bi2O3Oxide System

2009 ◽  
Vol 2009 ◽  
pp. 1-4 ◽  
Author(s):  
L. Bourja ◽  
B. Bakiz ◽  
A. Benlhachemi ◽  
M. Ezahri ◽  
J. C. Valmalette ◽  
...  
Keyword(s):  
Solid Solution ◽  
Raman Spectroscopy ◽  
Phase Changes ◽  
Phase System ◽  
X Ray Diffraction ◽  
X Ray ◽  
Vibrational Studies ◽  
Coprecipitation Route

A series of ceramics samples belonging to theCeO2-Bi2O3phase system have been prepared via a coprecipitation route. The crystallized phases were obtained by heating the solid precursors at600∘Cfor 6 hours, then quenching the samples. X-ray diffraction analyses show that forx<0.20a solid solutionCe1−xBixO2−x/2with fluorine structure is formed. For x ranging between 0.25 and 0.7, a tetragonalβ′phase coexisting with the FCC solid solution is observed. For x ranging between 0.8 and 0.9, a new tetragonalβphase appears. Theβ′phase is postulated to be a superstructure of theβphase. Finally, close tox=1, the classical monoclinicα Bi2O3structure is observed. Raman spectroscopy confirms the existence of the phase changes as x varies between 0 and 1.

Synthesis and characterization of a linked, π-π stacked organotin compound of 2-mercapto-6-nitrobenzothiazolyl diphenyltin chloride with 2-ethoxyl-6-nitrobenzothiazole

2003 ◽  
Vol 81 (7) ◽  
pp. 825-831 ◽  
Author(s):  
Chunlin Ma ◽  
Qin Jiang ◽  
Rufen Zhang
Keyword(s):  
Title Compound ◽  
Organotin Compound ◽  
X Ray Diffraction ◽  
X Ray ◽  
Stacking Interaction ◽  
X Ray Crystallography ◽  
H Nmr ◽  
Π Stacking ◽  
Π Stacking Interaction ◽  
Molecular Components

The new organotin compound, Ph2Sn(Cl)[S(C7H3N2O2S)]·[(C7H3N2O2S)OEt], assembled by an intermolecular aromatic benzothiazole–benzothiazole π-π stacking interaction, has been synthesized by the reaction of diphenyltin dichloride with 2-mercapto-6-nitrobenzothiazole. The title compound was characterized by elemental, IR, 1H NMR, and X-ray crystallography analyses. Single-crystal X-ray diffraction data reveals that the title compound has two different molecular components. The component Ph2Sn(Cl)[S(C7H3N2O2S)] has a pentacoordinate tin, which further forms an infinite one-dimensional chain by intermolecular non-bonded Cl···S interactions, resulting in an intercalation lattice that holds (C7H3N2O2S)OEt molecules. The formation of the molecule (C7H3N2O2S)OEt as well as its intercalated mechanism has also been discussed.Key words: organotin, assemble, π-π stacking interaction, 2-mercapto-6-nitrobenzothiazole, non-bonded interaction, crystal structure.

A (4,4)-connected zinc(II) coordination polymer constructed with the flexible 2-carboxy phenoxyacetate ligand: synthesis, conformation alteration and fluorescent properties

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Jun-Xia Li ◽  
Tian Zhang ◽  
He-Jun Chen ◽  
Zhong-Xiang Du
Keyword(s):  
Coordination Polymer ◽  
Hydrothermal Reaction ◽  
Layer Structure ◽  
Fluorescence Emission ◽  
Phenoxyacetic Acid ◽  
X Ray Diffraction ◽  
Fluorescent Properties ◽  
Sulfate Heptahydrate ◽  
X Ray ◽  
Related Compounds

Abstract A new binary ZnII coordination polymer, [Zn(2-cpa)(H2O)] n (2D-Zn) has been prepared by a 120 °C hydrothermal reaction of zinc(II) sulfate heptahydrate and 2-carboxy phenoxyacetic acid (2-H2cpa) in the presence of potassium hydroxide. Single-crystal X-ray diffraction analysis shows that the ZnII ion is located in a deformed ZnO6 octahedron bonded by one water and three 2-carboxy phenoxyacetate (2-cpa) ligands. The 2-cpa exhibits pentadentate double bridging chelate-μ 3 coordination mode and connects adjacent ZnII ions to generate a corrugated (4,4)-connected layer structure. The structures, conformation of 2-cpa and photoluminescence spectra for 2D-Zn have been carefully analyzed and compared with its two closely related compounds ̶ 1D [Zn(2-cpa)(H2O)] n (1D-Zn) and mononuclear [Zn(2-cpa)(H2O)3] (0D-Zn). The results showed that the conformation of 2-cpa in 2D-Zn has the maximum alteration and the corresponding fluorescence emission peak of 2D-Zn has the largest red-shift of 62 nm compared with that of free 2-H2cpa.

A new twofold interpenetrated two-dimensional cadmium(II) coordination polymer constructed from 2,2′-(benzene-1,4-dicarboxamido)dipropionate

2018 ◽  
Vol 74 (11) ◽  
pp. 1434-1439
Author(s):  
Hong-Tao Zhang ◽  
Xiao-Long Wang
Keyword(s):  
Coordination Polymer ◽  
Coordination Polymers ◽  
Self Assembly ◽  
Fluorescence Emission ◽  
Functional Materials ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Carboxylate Groups ◽  
Potential Applications

In recent years, much initial interest and enthusiasm has focused on the self-assembly of coordination polymers due to the aesthetics of their crystalline architectures and their potential applications as new functional materials. As part of an exploration of chiral coordination polymers, a new twofold interpenetrated two-dimensional (2D) coordination polymer, namely, poly[[tetraaquabis[μ3-(2R,2′R)-2,2′-(benzene-1,4-dicarboxamido)dipropionato-κ5 O,O′:O′′,O′′′:O′′]dicadmium(II)] trihydrate], {[Cd2(C14H14N2O6)2(H2O)4]·3H2O} n , has been synthesized by the reaction of Cd(CH3COO)2·2H2O with the designed ligand (2R,2′R)-2,2′-(benzene-1,4-dicarboxamido)dipropionic acid (H2 L). The compound has been structurally characterized by elemental analysis, IR spectroscopy, powder X-ray diffraction and single-crystal X-ray diffraction analysis. In the crystal structure, each CdII cation binds to three carboxylate groups from two crystallographically independent L 2− dianions. Four carboxylate groups link two crystallographically independent cadmium cations into a 4,4-connected secondary building unit (SBU). The resulting SBUs are extended into a two-dimensional folding sheet via the terephthalamide moiety of the ligand as a spacer, which can be simplified as a (4,4)-connected 4,4L15 net with the point symbol (3.53.62)(32.52.62). In the lattice, two independent folding sheets interpenetrate each other to yield a double-sheet layer. The resulting 2D layers pack in parallel arrays through intermolecular hydrogen bonds and interlayer π–π interactions. The thermal stability and photoluminescence properties of the title compound have been investigated and it exhibits an enhanced fluorescence emission and a longer lifetime compared with free H2 L.

Fabrication and characterization of microwave cured high-density polyethylene/carbon nanotube and polypropylene/carbon nanotube composites

2019 ◽  
Vol 53 (15) ◽  
pp. 2091-2104 ◽  
Author(s):  
Gaurav Arora ◽  
Himanshu Pathak ◽  
Sunny Zafar
Keyword(s):  
Carbon Nanotube ◽  
High Density Polyethylene ◽  
High Density ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites ◽  
Scanning Electron

Carbon nanotubes have been used as reinforcements in polymers due to their high elasticity, flexibility, and thermal conductivity. In this study, pellets of high-density polyethylene +20 wt% carbon nanotube and polypropylene +20 wt% carbon nanotube were cured using microwave energy. X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, uniaxial tensile test, and scanning electron microscopy was used to study morphology, thermal stability, and mechanical performance of the microwave-cured composites. X-ray diffraction analysis confirmed the bonding between the polymer and carbon nanotube as the peaks shifted and intensified. From the thermal study, it was observed that melting point of the composites is affected by microwave curing and the crystallinity of high-density polyethylene/carbon nanotube and polypropylene/carbon nanotube changed by 57.67% and 47.28%, respectively. Results of the uniaxial tensile test indicated that Young’s modulus of microwave cured high-density polyethylene/carbon nanotube and polypropylene/carbon nanotube composites were improved by 295% and 787.8%, respectively. Scanning electron microscopic fractography shows the stretching of polymer over-lapped on carbon nanotubes in the direction of the applied load.

scholarly journals Evaluation of Biomedical Ti/ZrO2 Joint Brazed with Pure Au Filler: Microstructure and Mechanical Properties

Metals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 526
Author(s):  
Yuzhen Lei ◽  
Hong Bian ◽  
Wei Fu ◽  
Xiaoguo Song ◽  
Jicai Feng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Energy Dispersive Spectrometry ◽  
Filler Metal ◽  
Interfacial Microstructure ◽  
Holding Time ◽  
X Ray Diffraction ◽  
X Ray ◽  
Medical Products ◽  
Metallurgical Bonding ◽  
Brazed Joints

Titanium and zirconia (ZrO2) ceramics are widely used in biomedical fields. This study aims to achieve reliable brazed joints of titanium/ZrO2 using biocompatible Au filler for implantable medical products. The effects of brazing temperature and holding time on the interfacial microstructures and mechanical properties of titanium/Au/ZrO2 joints were fully investigated by scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS) and X-ray diffraction (XRD). The results indicated that the typical interfacial microstructure of the titanium/Au/ZrO2 joint was titanium/Ti3Au layer/TiAu layer/TiAu2 layer/TiAu4 layer/TiO layer/ZrO2 ceramic. With an increasing brazing temperature or holding time, the thickness of the Ti3Au + TiAu + TiAu2 layer increased gradually. The growth of the TiO layer was observed, which promoted metallurgical bonding between the filler metal and ZrO2 ceramic. The optimal shear strength of ~35.0 MPa was obtained at 1150 °C for 10 min. SEM characterization revealed that cracks initiated and propagated along the interface of TiAu2 and TiAu4 reaction layers.

scholarly journals Characterising the Microstructure of an Additively Built Al-Cu-Li Alloy

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5188
Author(s):  
Iris Raffeis ◽  
Frank Adjei-Kyeremeh ◽  
Uwe Vroomen ◽  
Silvia Richter ◽  
Andreas Bührig-Polaczek
Keyword(s):  
Volume Fraction ◽  
Analytical Techniques ◽  
High Strength ◽  
High Energy ◽  
Phase System ◽  
X Ray Diffraction ◽  
Powder Bed ◽  
X Ray ◽  
Conventional View ◽  
Multi Phase

Al-Cu-Li alloys are famous for their high strength, ductility and weight-saving properties, and have for many years been the aerospace alloy of choice. Depending on the alloy composition, this multi-phase system may give rise to several phases, including the major strengthening T1 (Al2CuLi) phase. Microstructure investigations have extensively been reported for conventionally processed alloys with little focus on their Additive Manufacturing (AM) characterised microstructures. In this work, the Laser Powder Bed Fusion (LPBF) built microstructures of an AA2099 Al-Cu-Li alloy are characterised in the as-built (no preheating) and preheat-treated (320 °C, 500 °C) conditions using various analytical techniques, including Synchrotron High-Energy X-ray Diffraction (S-HEXRD). The observed dislocations in the AM as-built condition with no detected T1 precipitates confirm the conventional view of the difficulty of T1 to nucleate on dislocations without appropriate heat treatments. Two main phases, T1 (Al2CuLi) and TB (Al7.5Cu4Li), were detected using S-HEXRD at both preheat-treated temperatures. Higher volume fraction of T1 measured in the 500 °C (75.2 HV0.1) sample resulted in a higher microhardness compared to the 320 °C (58.7 HV0.1) sample. Higher TB volume fraction measured in the 320 °C sample had a minimal strength effect.

Sign in / Sign up

Export Citation Format

Share Document