scholarly journals Tailoring Carbon Nanotubes to Enhance their Efficiency as Electron Shuttle on the Biological Removal of Acid Orange 10 Under Anaerobic Conditions

Nanomaterials ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2496
Author(s):  
Ana Rita Silva ◽  
O. Salomé G.P. Soares ◽  
M. Fernando R. Pereira ◽  
M. Madalena Alves ◽  
Luciana Pereira
Keyword(s):  
Carbon Nanotubes ◽  
Methane Production ◽  
Carbon Nanomaterials ◽  
Reduction Rate ◽  
Granular Sludge ◽  
Biological Reduction ◽  
Methanogenic Activity ◽  
Acid Orange ◽  
Biological Removal ◽  
Acid Orange 10

Anaerobic treatments have been described for the biodegradation of pollutants. However, the reactions proceed slowly due to the recalcitrant nature of these compounds. Carbon nanomaterials (CNM) intermediate in, and favor, the electron transfer, accelerating the anaerobic reduction of pollutants, which act as final electron acceptors. In the present work, different carbon nanotubes (CNT) with modified surface chemistry, namely CNT oxidized with HNO3 (CNT_HNO3) and CNT doped with nitrogen in a ball milling process (CNT_N_MB) were prepared using commercial CNT as a starting material. The new CNM were tested as redox mediators (RM), 0.1 g L−1, in the biological reduction of the azo dye, Acid Orange 10 (AO10), with an anaerobic granular sludge, over 48 h of reaction. Methane production was also assessed to verify the microorganism’s activity and the CNM’s effect on the methanogenic activity. An improvement in the biological removal of AO10 occurred with all CNM (above 90%), when compared with the control without CNM (only 32.4 ± 0.3%). The best results were obtained with CNT_N_MB, which achieved 98.2 ± 0.1% biological AO10 removal, and an 11-fold reduction rate increase. In order to confer magnetic properties to the CNM, tailored CNT were impregnated with 2% of iron-samples: CNT@2%Fe, CNT@2%Fe_N_MB, and CNT@2%Fe_HNO3. The better performance of the CNT doped with nitrogen was confirmed with CNT@2%Fe_N_MB, and the magnetic character facilitated its recovery after treatment, and did not affect its good catalytic properties. No dye removal was observed in the abiotic assays, so the removal was not due to adsorption on the CNM. Furthermore, the microorganism’s viability was maintained during the assay and methane production was not affected by the presence of the CNM. Despite the toxic character of the aromatic amines formed, detoxification was observed after the biological process with thermally treated CNT.

scholarly journals Detoxification of Ciprofloxacin in an Anaerobic Bioprocess Supplemented with Magnetic Carbon Nanotubes: Contribution of Adsorption and Biodegradation Mechanisms

2021 ◽  
Vol 22 (6) ◽  
pp. 2932
Author(s):  
Ana R. Silva ◽  
Ana J. Cavaleiro ◽  
O. Salomé G. P. Soares ◽  
Cátia S.N. Braga ◽  
Andreia F. Salvador ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Biological Treatment ◽  
Carbon Nanomaterials ◽  
Vibrio Fischeri ◽  
Chemical Reduction ◽  
Granular Sludge ◽  
Reaction Rates ◽  
Biological Reduction ◽  
Biological Assays ◽  
Biological Tests

In anaerobic bioreactors, the electrons produced during the oxidation of organic matter can potentially be used for the biological reduction of pharmaceuticals in wastewaters. Common electron transfer limitations benefit from the acceleration of reactions through utilization of redox mediators (RM). This work explores the potential of carbon nanomaterials (CNM) as RM on the anaerobic removal of ciprofloxacin (CIP). Pristine and tailored carbon nanotubes (CNT) were first tested for chemical reduction of CIP, and pristine CNT was found as the best material, so it was further utilized in biological anaerobic assays with anaerobic granular sludge (GS). In addition, magnetic CNT were prepared and also tested in biological assays, as they are easier to be recovered and reused. In biological tests with CNM, approximately 99% CIP removal was achieved, and the reaction rates increased ≈1.5-fold relatively to the control without CNM. In these experiments, CIP adsorption onto GS and CNM was above 90%. Despite, after applying three successive cycles of CIP addition, the catalytic properties of magnetic CNT were maintained while adsorption decreased to 29 ± 3.2%, as the result of CNM overload by CIP. The results suggest the combined occurrence of different mechanisms for CIP removal: adsorption on GS and/or CNM, and biological reduction or oxidation, which can be accelerated by the presence of CNM. After biological treatment with CNM, toxicity towards Vibrio fischeri was evaluated, resulting in ≈ 46% detoxification of CIP solution, showing the advantages of combining biological treatment with CNM for CIP removal.

The effect of extreme temperatures (70–80°C) on the effluent quality and sludge characteristics of UASB reactors

1997 ◽  
Vol 36 (6-7) ◽  
pp. 325-332 ◽  
Author(s):  
Raghida Lepistö ◽  
Jukka Rintala
Keyword(s):  
Volatile Fatty Acids ◽  
Granular Sludge ◽  
Anaerobic Sludge ◽  
Methanogenic Activity ◽  
Sludge Characteristics ◽  
Effluent Quality ◽  
Start Up ◽  
Thermomechanical Pulping ◽  
Increasing Temperature ◽  
Uasb Reactors

The study focused on the effluent quality and sludge characteristics during the start-up and operation of extreme thermophilic (70 to 80°C) upflow anaerobic sludge bed (UASB) reactors, inoculated with mesophilic and thermophilic granular sludge and fed with acetate, volatile fatty acids (VFA), and thermomechanical pulping (TMP) whitewater. Low effluent quality and long start-up periods were observed during the start-up of the 70 to 76°C, VFA-fed UASB reactors inoculated with mesophilic granulae, while better effluent quality and considerably shorter start-up periods were observed when thermophilic (55/70°C) inocula were used. With VFA feed, a significant amount of acetate was removed at 70°C and even at 80°C, while propionate removal was negligible. With TMP whitewater feed, low VFA effluent concentration was obtained at 70°C. The volatile solids (VS) and the VS/total solids (TS) content of the sludge decreased significantly during the first 2–3 months of operation when mesophilic inocula were used. The initial specific methanogenic activity (ISMA) of the extreme thermophilic sludge decreased with increasing temperature and was slightly higher on glucose than on acetate. At 70 to 80°C, various rod-like bacteria were dispersed through the granulae in either individual or in low density micro colonies surrounded with a varying degree of precipitates.

The bacterial numeration and an observation of a new syntrophic association for granular sludge

1997 ◽  
Vol 36 (6-7) ◽  
pp. 133-140 ◽  
Author(s):  
Zhu Jianrong ◽  
Hu Jicui ◽  
Gu Xiasheng
Keyword(s):  
Anaerobic Bacteria ◽  
Granular Sludge ◽  
Methanogenic Bacteria ◽  
Uasb Reactor ◽  
Two Phase ◽  
Methanogenic Activity ◽  
Syntrophic Association ◽  
Group I ◽  
Acetogenic Bacteria ◽  
Fermentative Bacteria

The bacterial numeration and microbial observation were made on granular sludge from laboratory single and two-phase UASB reactors. It was shown that the fermentative bacteria (group I), H2-producing acetogenic bacteria (group II) and methanogenic bacteria (group III) of granular sludge in single UASB reactor were 9.3 × 108−4.3 × 109, 4.3 × 107−4.3 × 108, 2.0−4.3 × 108, respectively, during the granulation process. The sludge of methanogenic reactor exhibited the similar results. That indicates there is no big difference between suspended and granular sludge, and bacterial population for three groups of anaerobic bacteria are similar. The formation of granular sludge depends mainly on the organization and arrangement of bacteria. An observation of granular sludge using electron microscope revealed that the fermentative bacteria and hydrogenotrophic methanogens existed on outer surface of granules, and aceticlastic methanogens and H2-producing acetogenic bacteria occupied the inner layer. A new syntrophic association between Methanosaeta sp. and Syntrophomonas sp. (even plus Methanobrevibacter sp.) was observed. Because Methanosaeta can effectively convert the acetate (the end product of propionate and butyrate) to methane, such a new syntrophic association is supposed to support the degradation of short fatty acids and high methanogenic activity of granular sludge. Based on structural pattern, a hypothesis on mechanism of granulation called “crystallized nuclei formation” is proposed.

scholarly journals Experimental data on the removal of acid orange 10 dye from aqueous solutions using TiO2/Na-Y zeolite and BiVO4/Na-Y zeolite nanostructures: A comparison study

Data in Brief ◽  
2021 ◽  
Vol 35 ◽  
pp. 106869
Author(s):  
Behzad Rahimi ◽  
Nayereh Rezaie-Rahimi ◽  
Negar Jafari ◽  
Ali Abdolahnejad ◽  
Afshin Ebrahimi
Keyword(s):  
Experimental Data ◽  
Aqueous Solutions ◽  
Comparison Study ◽  
Y Zeolite ◽  
Acid Orange ◽  
Acid Orange 10

scholarly journals N-Dopant-Mediated Growth of Metal Oxide Nanoparticles on Carbon Nanotubes

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1882
Author(s):  
Jin Ah Lee ◽  
Won Jun Lee ◽  
Joonwon Lim ◽  
Sang Ouk Kim
Keyword(s):  
Carbon Nanotubes ◽  
Metal Oxide ◽  
Carbon Nanomaterials ◽  
Wide Spectrum ◽  
Metal Oxide Nanoparticles ◽  
Nucleation And Growth ◽  
Oxide Nanoparticles ◽  
Metal Oxide Nanoparticle ◽  
Nucleation Sites ◽  
Direct Growth

Metal oxide nanoparticles supported on heteroatom-doped graphitic surfaces have been pursued for several decades for a wide spectrum of applications. Despite extensive research on functional metal oxide nanoparticle/doped carbon nanomaterial hybrids, the role of the heteroatom dopant in the hybridization process of doped carbon nanomaterials has been overlooked. Here, the direct growth of MnOx and RuOx nanoparticles in nitrogen (N)-doped sites of carbon nanotubes (NCNTs) is presented. The quaternary nitrogen (NQ) sites of CNTs actively participate in the nucleation and growth of the metal nanoparticles. The evenly distributed NQ nucleation sites mediate the generation of uniformly dispersed <10 nm diameter MnOx and RuOx nanoparticles, directly decorated on NCNT surfaces. The electrochemical performance of the resultant hybridized materials was evaluated using cyclic voltammetry. This novel hybridization method using the dopant-mediated nucleation and growth of metal oxides suggests ways that heteroatom dopants can be utilized to optimize the structure, interface and corresponding properties of graphitic carbon-based hybrid materials.

Fullerene Derivatives (CN-[OH]β) and Carbon Nanotubes Modelled as Transporters for Doxorubicin Drug in Cancer Therapy

2021 ◽  
Author(s):  
Hakim AL Garalleh
Keyword(s):  
Carbon Nanotubes ◽  
Anticancer Drugs ◽  
Carbon Nanomaterials ◽  
Aqueous Media ◽  
Medical Model ◽  
Antitumor Agent ◽  
World Health ◽  
Fullerene Derivative ◽  
Fullerene Derivatives ◽  
Health Organization

Abstract Carbon nanomaterials have received increasing attention in drug delivery applications because of their distinct properties and structures, including large surface areas, high conductivity, low solubility in aqueous media, unique chemical functionalities and stability at the nano-scale size. Particularly, they have been used as nano-carriers and mediators for anticancer drugs such as, combination with Cisplatin, Camptothecin and Doxorubicin. Cancer has become the most challenging disease because its sophisticated therapy and classified as one of the top killers according to the World health organization records. The aim of the current work is to study and investigate the mechanism of combination between single-walled carbon nanotubes (SWCNTs) and the fullerene derivatives (C N -[OH] β ) as mediators, and anticancer drugs for photodynamic therapy directly to destroy the infected cells without damaging the normal ones. Here, we obtain a bio-medical model to determine the efficiency of usefulness of Doxorubicin (DOX) as an antitumor agent conjugated with SWCNTs with variant radii r and fullerene derivative (C N -[OH] β ). The two sub-models are obtained mathematically to evaluate the potential energy arising from the DOX-SWCNT and DOX-(C N -[OH] β ) interactions. DOX modelled as two-connected spheres, small and large, each interacting with different SWCNTs (variant radii r ) and fullerene derivatives C N -[OH] β , forming based on the number of carbon atoms (N) and the number of Hydroxide molecules (OH) ( β ), respectively.

Sludge accumulation and methanogenic activity in an anaerobic lagoon

2000 ◽  
Vol 42 (10-11) ◽  
pp. 247-255 ◽  
Author(s):  
J. Paing ◽  
B. Picot ◽  
J. P. Sambuco ◽  
A. Rambaud
Keyword(s):  
Anaerobic Digestion ◽  
Methane Production ◽  
Anaerobic Degradation ◽  
Volatile Fatty Acids ◽  
Anaerobic Fermentation ◽  
Methanogenic Activity ◽  
Start Up ◽  
Anaerobic Lagoon ◽  
Methane Production Rate ◽  
Sludge Accumulation

Sludge accumulation and the characteristics of anaerobic digestion in sludge had been investigated in a primary anaerobic lagoon. Methanogenic potential of sludge was evaluated by an anaerobic digestion test which measured the methane production rate. Sludge was sampled at several points in the lagoon to determine spatial variations and with a monthly frequency from the start-up of the lagoon to observe the development of anaerobic degradation. Maximum amounts of sludge accumulated near the inlet. The mean methane production of sludge was 2.9 ml gVS–1 d–1. Sludge near the outlet presented a greater methanogenic activity and a lesser concentration of volatile fatty acids than near the inlet. The different stages of anaerobic degradation were spatially separated, acidogenesis near the inlet and methanogenesis near the outlet. This staged distribution seemed to increase efficiency of anaerobic fermentation compared with septic tanks. Methane release at the surface of the lagoon was estimated to be very heterogeneous with a mean of 25 l m–2 d–1. The development of performance and sludge characteristics showed the rapid beginning of methanogenesis, three months after the start-up of the anaerobic lagoon. Considering the volume of accumulated sludge, it could however be expected that methanogenic activity would further increase.

Analysis of environmental factors affecting methane production from high-solids organic waste

1997 ◽  
Vol 36 (6-7) ◽  
pp. 493-500 ◽  
Author(s):  
J. J. Lay ◽  
Y. Y. Li ◽  
T. Noike ◽  
J. Endo ◽  
S. Ishimoto
Keyword(s):  
Moisture Content ◽  
Methane Production ◽  
Organic Waste ◽  
High Solids ◽  
Methanogenic Activity ◽  
Factors Affecting ◽  
Bacterial System ◽  
Sludge Cake ◽  
Production Curve ◽  
Ph Range

A simple model developed from the Gompertz equation was used to describe the cumulative methane production curve in the batch culture. By using this model, three key parameters, namely methane production rate, potential and lagphase time, in a cumulative methane production curve were exactly estimated based on the experimental data. The results indicate that each gram of dry organic waste of a sludge cake, meat, carrot, rice, potato and cabbage had a methane production potential of 450, 424, 269, 214, 203 and 96 mL, respectively. The methanogenic activity of these digesters decreased with a decrease in the moisture content. The moisture content threshold limit, at which the methanogenic activity dropped to zero, was found to be 56.6% for the sludge cake, but greater than 80% for meat, carrot and cabbage. In the high-solids sludge digestion, the relative methanogenic activity dropped from 100% to 53% when the moisture content decreased from 96% to 90%. The rate of methane production at moisture contents of 90% to 96% functioned in a pH range between 6.6 and 7.8, but optimally at pH 6.8, and the process may fail if the pH was lower than 6.1 or higher than 8.3. On the other hand, the methanogenic activity was dependent on the level of ammonium, NH4+, but not free ammonia, NH3, indicating that the NH4+ was the more significant factor rather than the NH3 in affecting the methanogenic activity of a well-acclimatized bacterial system. In the wide pH range of 6.5 to 8.5, the methanogenic activity decreased with the increase in the NH4+; dropped 10% at the NH4+-N concentration of 1670-3720 mg·L−1, 50% at 4090-5550 mg·L−1 and dropped to zero at 5880-6600 mg·L−1. However, the lagphase time was dependent on the NH3 level, but not on NH4+, and when NH3-N was higher than 500 mg·L−1, a notable shock was observed. This suggests that the NH3 level was the more sensitive factor than the NH4+ level for an unacclimatized bacterial system.

scholarly journals Application of Carbon Nanomaterials Decorated Electrochemical Sensor for Analysis of Environmental Pollutants

2021 ◽  
Author(s):  
Sunil Kumar ◽  
Abhay Nanda Srivastva
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanomaterials ◽  
Electrochemical Sensors ◽  
Anodic Stripping Voltammetry ◽  
Environmental Pollutants ◽  
Stripping Voltammetry ◽  
Metal Electrode ◽  
Effective Area ◽  
Electrochemical Sensing ◽  
Working Electrode

Carbon nanomaterials (CNMs), especially carbon nanotubes and graphene, have been attracting tremendous attention in environmental analysis for rapid and cost effective detection of various analytes by electrochemical sensing. CNMs can increase the electrode effective area, enhance the electron transfer rate between the electrode and analytes, and/or act as catalysts to increase the efficiency of electrochemical reaction, detection, adsorption and removal are of great significance. Various carbon nanomaterials including carbon nanotubes, graphene, mesoporous carbon, carbon dots exhibited high adsorption and detection capacity. Carbon and its derivatives possess excellent electro catalytic properties for the modified sensors, electrochemical methods usually based on anodic stripping voltammetry at some modified carbon electrodes. Metal electrode detection sensitivity is enhanced through surface modification of working electrode (GCE). Heavy metals have the defined redox potential. A remarkable deal of efficiency with the electrochemical sensors can be succeeded by layering the surface of the working electrode with film of active electro-catalytic species. Usually, electro catalysts used for fabrication of sensors are surfactants, nano-materials, polymers, carbon-based materials, organic ligands and biomaterials.

Acid Endurance and Sorption of Zn2+ of Anaerobic Granular Sludge Acclimated by Flue Gas Pretreatment Wastewater

2013 ◽  
Vol 634-638 ◽  
pp. 182-186
Author(s):  
Juan Wang ◽  
Qin Zhong
Keyword(s):  
Flue Gas ◽  
Ph Value ◽  
Granular Sludge ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Anaerobic Granular Sludge ◽  
Methanogenic Activity ◽  
Activity Inhibition ◽  
Anaerobic Sludge Blanket

With the aim to use anaerobic granular sludge, the methanogenic activity inhibition and recovery of anaerobic granular sludge from an industrial anaerobic reactor (s1) were investigated by measuring the methane volume at low pH. A lab-scale upflow anaerobic sludge blanket (UASB) reactor was inoculated with s1.s1 was used to remove Zn2+ in wastewater. The results show that activity of s1 is similar when the pH value is 6.5 to 7.0. The methane volume is obviously decreased when the pH value is 6.0. The activity is completely inhibited when the pH value is 4.5. The activity is fully recovered when the pH is above 6.5 and hardly recovers when the pH fell to 4.5. The main Zn2+ removal mechanism is chemical adsorption.

Sign in / Sign up

Export Citation Format

Share Document