scholarly journals Ultra-Low-Loss Mid-Infrared Plasmonic Waveguides Based on Multilayer Graphene Metamaterials

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2981
Author(s):  
Chia-Chien Huang ◽  
Ruei-Jan Chang ◽  
Ching-Wen Cheng
Keyword(s):  
Integrated Circuits ◽  
Optical Diffraction ◽  
Multilayer Graphene ◽  
Plasmonic Waveguides ◽  
Large Area ◽  
Mid Infrared ◽  
Optical Signals ◽  
Present Design ◽  
On Chip ◽  
Mode Area

Manipulating optical signals in the mid-infrared (mid-IR) range is a highly desired task for applications in chemical sensing, thermal imaging, and subwavelength optical waveguiding. To guide highly confined mid-IR light in photonic chips, graphene-based plasmonics capable of breaking the optical diffraction limit offer a promising solution. However, the propagation lengths of these materials are, to date, limited to approximately 10 µm at the working frequency f = 20 THz. In this study, we proposed a waveguide structure consisting of multilayer graphene metamaterials (MLGMTs). The MLGMTs support the fundamental volume plasmon polariton mode by coupling plasmon polaritons at individual graphene sheets over a silicon nano-rib structure. Benefiting from the high conductivity of the MLGMTs, the guided mode shows ultralow loss compared with that of conventional graphene-based plasmonic waveguides at comparable mode sizes. The proposed design demonstrated propagation lengths of approximately 20 µm (four times the current limitations) at an extremely tight mode area of 10−6A0, where A0 is the diffraction-limited mode area. The dependence of modal characteristics on geometry and material parameters are investigated in detail to identify optimal device performance. Moreover, fabrication imperfections are also addressed to evaluate the robustness of the proposed structure. Moreover, the crosstalk between two adjacent present waveguides is also investigated to demonstrate the high mode confinement to realize high-density on-chip devices. The present design offers a potential waveguiding approach for building tunable and large-area photonic integrated circuits.

Multilayer Graphene-Based Carbon Interconnect

2012 ◽  
Vol 1407 ◽  
Author(s):  
Tianhua Yu ◽  
Edwin Kim ◽  
Nikhil Jain ◽  
Bin Yu
Keyword(s):  
Performance Metrics ◽  
Monolayer Graphene ◽  
Multilayer Graphene ◽  
Large Area ◽  
Electrical Stress ◽  
Oxygen Plasma Etching ◽  
Doping Technique ◽  
System Breakdown ◽  
Grown Graphene ◽  
On Chip

ABSTRACT3D stacked (or uncorrelated) multilayer graphene (s-MLG) is investigated as a potential material platform for carbon-based on-chip interconnects. S-MLG samples are prepared by repeatedly transferring and stacking the large-area CVD-grown graphene monolayers, followed by wire patterning and oxygen plasma etching of graphene. We observed superior wire conduction of s-MLG over that of monolayer graphene or ABAB-stacked multilayer graphene. Further reduction of s-MLG resistivity is anticipated with increasing number of stacked layers. Electrical stress-induced doping technique is used to engineer the Dirac point, as well as to reduce graphene-to-metal contact resistance, improving the overall performance metrics of the s-MLG system. Breakdown experiments show that the current-carrying capacity of s-MLG is significantly enhanced as compared with that of monolayer graphene.

scholarly journals Electro-Absorption Modulation in GeSn Alloys for Wide-Spectrum Mid-Infrared Applications

2021 ◽  
Author(s):  
Yun-Da Hsieh ◽  
Jun-Han Lin ◽  
Richard Soref ◽  
Greg Sun ◽  
Hung-Hsiang Cheng ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Wide Spectrum ◽  
Complementary Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Optical Modulation ◽  
Bandgap Energy ◽  
Optical Modulators ◽  
Mid Infrared ◽  
Wide Range ◽  
On Chip

Abstract Si-based electronic-photonic integrated circuits (EPICs), which are compatible with state-of-the-art complementary metal-oxide-semiconductor (CMOS) processes, offer promising opportunities for on-chip mid-infrared (MIR) photonic systems. However, the lack of efficient MIR optical modulators on Si hinders the utilization of MIR EPICs. Here, we clearly demonstrate the Franz-Keldysh (FK) effect in GeSn alloys and achieve on-Si MIR electro-absorption optical modulation using GeSn heterostructures. Our experimental and theoretical results verify that the direct bandgap energy of GeSn can be widely tuned by varying the Sn content, thereby realizing wavelength-tunable optical modulation in the MIR range with a figure-of-merit of Δα /α0 (FOM) greater than 1.5 and a broadband operating range greater than 140 nm. In contrast to conventional silicon-photonic modulators based on the plasma dispersion effect, our GeSn heterostructure demonstrates practical and effective FK MIR optical modulation on Si and helps unlock the potential of MIR EPICs for a wide range of applications.

Mid-infrared germanium photonic integrated circuits for on-chip biochemical sensing

2018 ◽  
Author(s):  
Zhenzhou Cheng ◽  
Ting-Hui Xiao ◽  
Ziqiang Zhao ◽  
Wen Zhou ◽  
Mitsuru Takenaka ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Photonic Integrated Circuits ◽  
Mid Infrared ◽  
Biochemical Sensing ◽  
On Chip

scholarly journals On-chip trans-dimensional plasmonic router

Nanophotonics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 3357-3365 ◽  
Author(s):  
Shaohua Dong ◽  
Qing Zhang ◽  
Guangtao Cao ◽  
Jincheng Ni ◽  
Ting Shi ◽  
...  
Keyword(s):  
High Speed ◽  
High Efficiency ◽  
Incident Angle ◽  
Reciprocal Lattice ◽  
Plasmonic Waveguide ◽  
Optical Diffraction ◽  
Local Dynamic ◽  
Phase Gradient ◽  
On Chip ◽  
Plasmon Polaritons

AbstractPlasmons, as emerging optical diffraction-unlimited information carriers, promise the high-capacity, high-speed, and integrated photonic chips. The on-chip precise manipulations of plasmon in an arbitrary platform, whether two-dimensional (2D) or one-dimensional (1D), appears demanding but non-trivial. Here, we proposed a meta-wall, consisting of specifically designed meta-atoms, that allows the high-efficiency transformation of propagating plasmon polaritons from 2D platforms to 1D plasmonic waveguides, forming the trans-dimensional plasmonic routers. The mechanism to compensate the momentum transformation in the router can be traced via a local dynamic phase gradient of the meta-atom and reciprocal lattice vector. To demonstrate such a scheme, a directional router based on phase-gradient meta-wall is designed to couple 2D SPP to a 1D plasmonic waveguide, while a unidirectional router based on grating metawall is designed to route 2D SPP to the arbitrarily desired direction along the 1D plasmonic waveguide by changing the incident angle of 2D SPP. The on-chip routers of trans-dimensional SPP demonstrated here provide a flexible tool to manipulate propagation of surface plasmon polaritons (SPPs) and may pave the way for designing integrated plasmonic network and devices.

scholarly journals A Brief Overview of On-Chip Voltage Regulation in High-Performance and High-Density Integrated Circuits

IEEE Access ◽  
2021 ◽  
Vol 9 ◽  
pp. 813-826
Author(s):  
Farid Uddin Ahmed ◽  
Zarin Tasnim Sandhie ◽  
Liaquat Ali ◽  
Masud H. Chowdhury
Keyword(s):  
Integrated Circuits ◽  
High Performance ◽  
Voltage Regulation ◽  
High Density ◽  
On Chip

scholarly journals Design of mid-infrared filter array based on plasmonic metal nanodiscs array and its application to on-chip spectrometer

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Hwa-Seub Lee ◽  
Gyu-Weon Hwang ◽  
Tae-Yeon Seong ◽  
Jongkil Park ◽  
Jae Wook Kim ◽  
...  
Keyword(s):  
Nanoimprint Lithography ◽  
Filter Design ◽  
Reconstruction Technique ◽  
Filter Function ◽  
Promising Alternative ◽  
Mid Infrared ◽  
Spectrum Reconstruction ◽  
Filter Array ◽  
On Chip ◽  
Multispectral Filter Array

AbstractMid-infrared wavelengths are called the molecular fingerprint region because it contains the fundamental vibrational modes inherent to the substances of interest. Since the mid-infrared spectrum can provide non-destructive identification and quantitative analysis of unknown substances, miniaturized mid-infrared spectrometers for on-site diagnosis have attained great concern. Filter-array based on-chip spectrometer has been regarded as a promising alternative. In this study, we explore a way of applying a pillar-type plasmonic nanodiscs array, which is advantageous not only for excellent tunability of resonance wavelength but also for 2-dimensional integration through a single layer process, to the multispectral filter array for the on-chip spectrometer. We theoretically and experimentally investigated the optical properties of multi-periodic triangular lattices of metal nanodiscs array that act as stopband filters in the mid-infrared region. Soft-mold reverse nanoimprint lithography with a subsequent lift-off process was employed to fabricate the multispectral filter array and its filter function was successfully extracted using a Fourier transform infrared microscope. With the measured filter function, we tested the feasibility of target spectrum reconstruction using a Tikhonov regularization method for an ill-posed linear problem and evaluated its applicability to the infrared spectroscopic sensor that monitors an oil condition. These results not only verify that the multispectral filter array composed of stopband filters based on the metal nanodiscs array when combined with the spectrum reconstruction technique, has great potential for use to a miniaturized mid-infrared on-chip spectrometer, but also provide effective guidance for the filter design.

scholarly journals Towards lab-on-chip ultrasensitive ethanol detection using photonic crystal waveguide operating in the mid infrared

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ali Rostamian ◽  
Ehsan Madadi-Kandjani ◽  
Hamed Dalir ◽  
Volker J. Sorger ◽  
Ray T. Chen
Keyword(s):  
Photonic Crystal ◽  
Slow Light ◽  
High Sensitivity ◽  
Guided Wave ◽  
Silicon On Insulator ◽  
Group Index ◽  
Photonic Crystal Waveguide ◽  
Mid Infrared ◽  
Lab On Chip ◽  
On Chip

Abstract Thanks to the unique molecular fingerprints in the mid-infrared spectral region, absorption spectroscopy in this regime has attracted widespread attention in recent years. Contrary to commercially available infrared spectrometers, which are limited by being bulky and cost-intensive, laboratory-on-chip infrared spectrometers can offer sensor advancements including raw sensing performance in addition to use such as enhanced portability. Several platforms have been proposed in the past for on-chip ethanol detection. However, selective sensing with high sensitivity at room temperature has remained a challenge. Here, we experimentally demonstrate an on-chip ethyl alcohol sensor based on a holey photonic crystal waveguide on silicon on insulator-based photonics sensing platform offering an enhanced photoabsorption thus improving sensitivity. This is achieved by designing and engineering an optical slow-light mode with a high group-index of n g  = 73 and a strong localization of modal power in analyte, enabled by the photonic crystal waveguide structure. This approach includes a codesign paradigm that uniquely features an increased effective path length traversed by the guided wave through the to-be-sensed gas analyte. This PIC-based lab-on-chip sensor is exemplary, spectrally designed to operate at the center wavelength of 3.4 μm to match the peak absorbance for ethanol. However, the slow-light enhancement concept is universal offering to cover a wide design-window and spectral ranges towards sensing a plurality of gas species. Using the holey photonic crystal waveguide, we demonstrate the capability of achieving parts per billion levels of gas detection precision. High sensitivity combined with tailorable spectral range along with a compact form-factor enables a new class of portable photonic sensor platforms when combined with integrated with quantum cascade laser and detectors.

scholarly journals High-Performance On-Chip Silicon Beamsplitter Based on Subwavelength Metamaterials for Enhanced Fabrication Tolerance

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1304
Author(s):  
Raquel Fernández de Cabo ◽  
David González-Andrade ◽  
Pavel Cheben ◽  
Aitor V. Velasco
Keyword(s):  
Integrated Circuits ◽  
Fundamental Mode ◽  
High Performance ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Power Splitting ◽  
Excess Loss ◽  
Power Splitters ◽  
On Chip ◽  
Efficient Power

Efficient power splitting is a fundamental functionality in silicon photonic integrated circuits, but state-of-the-art power-division architectures are hampered by limited operational bandwidth, high sensitivity to fabrication errors or large footprints. In particular, traditional Y-junction power splitters suffer from fundamental mode losses due to limited fabrication resolution near the junction tip. In order to circumvent this limitation, we propose a new type of high-performance Y-junction power splitter that incorporates subwavelength metamaterials. Full three-dimensional simulations show a fundamental mode excess loss below 0.1 dB in an ultra-broad bandwidth of 300 nm (1400–1700 nm) when optimized for a fabrication resolution of 50 nm, and under 0.3 dB in a 350 nm extended bandwidth (1350–1700 nm) for a 100 nm resolution. Moreover, analysis of fabrication tolerances shows robust operation for the fundamental mode to etching errors up to ± 20 nm. A proof-of-concept device provides an initial validation of its operation principle, showing experimental excess losses lower than 0.2 dB in a 195 nm bandwidth for the best-case resolution scenario (i.e., 50 nm).

Precise Cache Profiling for Studying Radiation Effects

2021 ◽  
Vol 20 (3) ◽  
pp. 1-25
Author(s):  
James Marshall ◽  
Robert Gifford ◽  
Gedare Bloom ◽  
Gabriel Parmer ◽  
Rahul Simha
Keyword(s):  
Radiation Effects ◽  
Fault Injection ◽  
Error Correcting Codes ◽  
Direct Access ◽  
Transient Faults ◽  
Large Area ◽  
Common Multiple ◽  
Single Event Upsets ◽  
On Chip ◽  
Future Work

Increased access to space has led to an increase in the usage of commodity processors in radiation environments. These processors are vulnerable to transient faults such as single event upsets that may cause bit-flips in processor components. Caches in particular are vulnerable due to their relatively large area, yet are often omitted from fault injection testing because many processors do not provide direct access to cache contents and they are often not fully modeled by simulators. The performance benefits of caches make disabling them undesirable, and the presence of error correcting codes is insufficient to correct for increasingly common multiple bit upsets. This work explores building a program’s cache profile by collecting cache usage information at an instruction granularity via commonly available on-chip debugging interfaces. The profile provides a tighter bound than cache utilization for cache vulnerability estimates (50% for several benchmarks). This can be applied to reduce the number of fault injections required to characterize behavior by at least two-thirds for the benchmarks we examine. The profile enables future work in hardware fault injection for caches that avoids the biases of existing techniques.

Sign in / Sign up

Export Citation Format

Share Document