scholarly journals Optical Measurements on Thermal Convection Processes inside Thermal Energy Storages during Stand-By Periods

Optics ◽  
2020 ◽  
Vol 1 (1) ◽  
pp. 155-172
Author(s):  
Henning Otto ◽  
Christian Resagk ◽  
Christian Cierpka
Keyword(s):  
Density Gradient ◽  
Thermal Energy ◽  
Thermal Convection ◽  
Renewable Energy Sources ◽  
Optical Measurements ◽  
Temperature Fields ◽  
Gradient Field ◽  
Wall Jet ◽  
Heat Conducting ◽  
Measured Velocity

Thermal energy storages (TES) are increasingly important for storing energy from renewable energy sources. TES that work with liquid storage materials are used in their most efficient way by stratifying the storage fluid by its thermal density gradient. Mixing of the stratification layers during stand-by periods decreases the thermal efficiency of the TES. Tank sidewalls, unlike the often poorly heat-conducting storage fluids, promote a heat flux from the hot to the cold layer and lead to thermal convection. In this experimental study planar particle image velocimetry (PIV) measurements and background-oriented schlieren (BOS) temperature measurements are performed in a model experiment of a TES to characterise the influence of the thermal convection on the stratification and thus the storage efficiency. The PIV results show two vertical, counter-directed wall jets that approach in the thermocline between the stratification layers. The wall jet in the hot part of the thermal stratification shows compared to the wall jet in the cold region strong fluctuations in the vertical velocity, that promote mixing of the two layers. The BOS measurements have proven that the technique is capable of measuring temperature fields in thermally stratified storage tanks. The density gradient field as an intermediate result during the evaluation of the temperature field can be used to indicate convective structures that are in good agreement to the measured velocity fields.

scholarly journals Overall Efficiency of On-Site Production and Storage of Solar Thermal Energy

2021 ◽  
Vol 13 (3) ◽  
pp. 1360
Author(s):  
Teodora M. Șoimoșan ◽  
Ligia M. Moga ◽  
Livia Anastasiu ◽  
Daniela L. Manea ◽  
Aurica Căzilă ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Thermal Energy ◽  
Urban Areas ◽  
Renewable Energy Sources ◽  
Multicriteria Analysis ◽  
High Energy ◽  
Solar Thermal ◽  
Solar Thermal Energy ◽  
The Impact ◽  
And Storage

Harnessing renewable energy sources (RES) using hybrid systems for buildings is almost a deontological obligation for engineers and researchers in the energy field, and increasing the percentage of renewables within the energy mix represents an important target. In crowded urban areas, on-site energy production and storage from renewables can be a real challenge from a technical point of view. The main objectives of this paper are quantification of the impact of the consumer’s profile on overall energy efficiency for on-site storage and final use of solar thermal energy, as well as developing a multicriteria assessment in order to provide a methodology for selection in prioritizing investments. Buildings with various consumption profiles lead to achieving different values of performance indicators in similar configurations of storage and energy supply. In this regard, an analysis of the consumption profile’s impact on overall energy efficiency, achieved in the case of on-site generation and storage of solar thermal energy, was performed. The obtained results validate the following conclusion: On-site integration of solar systems allowed the consumers to use RES at the desired coverage rates, while restricted by on-site available mounting areas for solar fields and thermal storage, under conditions of high energy efficiencies. In order to segregate the results and support optimal selection, a multicriteria analysis was carried out, having as the main criteria the energy efficiency indicators achieved by hybrid heating systems.

DEVELOPMENT OF CONSTRUCTION OF THREE-INPUT GENERATING INSTALLATIONS ON BASED OF RENEWABLE ENERGY SOURCES

2018 ◽  
Author(s):  
Я.М. КАШИН ◽  
Л.Е. КОПЕЛЕВИЧ ◽  
А.В. САМОРОДОВ ◽  
Ч. ПЭН
Keyword(s):  
Renewable Energy ◽  
Kinetic Energy ◽  
Total Energy ◽  
Thermal Energy ◽  
Output Voltage ◽  
Renewable Energy Sources ◽  
Electrical Energy ◽  
Energy Sources ◽  
Voltage Regulator ◽  
The Sun

Описаны конструктивные особенности трехвходовой аксиальной генераторной установки (ТАГУ), преобразующей кинетическую энергию ветра и световую энергию солнца и суммирующей механическую, световую и тепловую энергию с одновременным преобразованием полученной суммарной энергии в электрическую. Показаны преимущества ТАГУ перед двухвходовыми генераторными установками. Дополнительное включение стабилизатора напряжения в схему ТАГУ позволило расширить область применения стабилизированной трехвходовой аксиальной генераторной установки за счет стабилизации ее выходного напряжения. The design features of the three-input axial generating installation (TAGI), which converts the kinetic energy of wind and light energy of the sun and sums the mechanical, light and thermal energy with the simultaneous conversion of the total energy into electrical energy, are described. The benefits of TAGI in front of the two-input generating installation shown. The additional introduction of a voltage regulator into the TAGI scheme allowed to expand the scope of the stabilized three-input axial generating installation by stabilizing its output voltage.

The Influence of Lubricant Supply Conditions and Bearing Configuration on the Performance of (Semi) Floating Ring Bearing Systems for Turbochargers

2017 ◽  
Author(s):  
Luis San Andrés ◽  
Feng Yu ◽  
Kostandin Gjika
Keyword(s):  
Heat Flow ◽  
Thermal Energy ◽  
Operating Conditions ◽  
Temperature Fields ◽  
Engine Oil ◽  
Large Temperature ◽  
Oil Viscosity ◽  
Supply Pressure ◽  
The Impact ◽  
Bearing System

Engine oil lubricated (semi) floating ring bearing (S)FRB systems in passenger vehicle turbochargers (TC) operate at temperatures well above ambient and must withstand large temperature gradients that can lead to severe thermo-mechanical induced stresses. Physical modeling of the thermal energy flow paths and an effective thermal management strategy are paramount to determine safe operating conditions ensuring the TC component mechanical integrity and the robustness of its bearing system. On occasion, the selection of one particular bearing parameter to improve a certain performance characteristic could be detrimental to other performance characteristics of a TC system. The paper details a thermohydrodynamic model to predict the hydrodynamic pressure and temperature fields and the distribution of thermal energy flows in the bearing system. The impact of the lubricant supply conditions (pressure and temperature), bearing film clearances, oil supply grooves on the ring ID surface are quantified. Lubricating a (S)FRB with either a low oil temperature or a high supply pressure increases (shear induced) heat flow. A lube high supply pressure or a large clearance allow for more flow through the inner film working towards drawing more heat flow from the hot journal, yet raises the shear drag power as the oil viscosity remains high. Nonetheless, the peak temperature of the inner film is not influenced much by the changes on the way the oil is supplied into the film as the thermal energy displaced from the hot shaft into the film is overwhelming. Adding axial grooves on the inner side of the (S)FRB improves its dynamic stability, albeit increasing the drawn oil flow as well as the drag power and heat flow from the shaft. The predictive model allows to identify a compromise between different parameters of groove designs thus enabling a bearing system with a low power consumption.

scholarly journals EXPERIMENTAL MODEL OF A COMBINED THERMAL SYSTEM FOR EFFICIENT USE OF RENEWABLE ENERGIES

2020 ◽  
Vol 60 (1) ◽  
pp. 287-294
Author(s):  
C. Dumitrescu ◽  
R. Rădoi ◽  
C. Cristescu ◽  
L. Dumitrescu
Keyword(s):  
Renewable Energy ◽  
Experimental Model ◽  
Thermal Energy ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Thermal System ◽  
Remote Areas ◽  
Energy Independence ◽  
Atmospheric Factors ◽  
Series Product

The article presents an experimental model of a modular structure system for the production of thermal energy and the results of conducting specific tests. The experimental model uses two renewable energy sources - solar energy and energy generated by burning biomass - to provide thermal energy for an increased duration, regardless of the atmospheric factors. Properly sized, the system can be designed as a series product, in a variety of powers, to be used by heat suppliers, and also by individuals, especially the ones from remote areas, who want to ensure their thermal energy independence by using renewable energy.

scholarly journals THE INFLUENCE OF THE METHOD OF LAYING PIPELINES ON THE ENERGY EFFICIENCY OF THE HEATING NETWORK

2019 ◽  
Vol 10 (2) ◽  
pp. 59-66
Author(s):  
E. A Biryuzova ◽  
A. S Glukhanov
Keyword(s):  
Energy Efficiency ◽  
Heat Loss ◽  
Thermal Insulation ◽  
Thermal Energy ◽  
Great Influence ◽  
Temperature Fields ◽  
Insulation Material ◽  
Design Work ◽  
Heat Networks ◽  
Insulation Thickness

Through pipelines of heat networks, due to their large length, a large amount of thermal energy is lost. Identification of technical solutions related to improving the energy efficiency of heating networks is an urgent task at present. The article is devoted to the consideration of options for laying pipelines of heat networks during design work. In the conducted studies, two main methods of underground laying of pipelines of heat networks with the choice of the most energy-efficient, with minimal losses of thermal energy are considered. Channel and channelless laying methods are investigated with the same design features and technological conditions of operation of pipelines of heat networks using the same thermal insulation material. For each option, the required thickness of the thermal insulation is determined by the normalized density of the heat flow, thermal calculations are performed to determine the heat loss and the value of the temperature fields generated around the operating pipelines of the heat networks. The obtained values of the thermal insulation thickness in the channel method of laying pipelines are 30-50 % lower than those in channelless laying. The heat loss values, according to the results of the heat calculation for the options under consideration, in the channel method of laying are reduced by 47-65 %. The temperature fields formed around the pipelines of thermal networks with channelless laying significantly exceed the natural value of the soil temperature at the depth of the pipeline. What has a great influence on the determination of the distance to adjacent pipelines and other utilities, laid underground, in the zone of the thermal network. A comparative analysis of the results obtained makes it possible to single out the choice of the method of laying the pipeline into a group of measures aimed at energy saving and increasing energy efficiency in heating systems.

scholarly journals Preliminary prospects of a Pumped Thermal Energy Storage (PTES) based on a supercritical CO2 Brayton cycle

2021 ◽  
Author(s):  
Karin Astrid Senta Edel ◽  
František Hrdlička ◽  
Václav Novotný
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Supercritical Co2 ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Brayton Cycle ◽  
Term Energy ◽  
Weather Changes

As part of the change towards a higher deployment of renewable energy sources, which naturally deliver energy intermittently, the need for energy storage systems is increasing. For compensation of disturbance in power production due to inter-day to seasonal weather changes, long-term energy storage is required. In the spectrum of storage systems, one out of a few geographically independent possibilities is the storage of electricity in heat, so-called Carnot-Batteries. This paper presents a Pumped Thermal Energy Storage (PTES) system based on a recuperated supercritical CO2 Brayton cycle. The modelled system provides a round-trip efficiency of 38.9%.

Numerical Study of Thermal Convection in Boussinesq-Stokes Suspension Occupying a Rectangular Box

2011 ◽  
Author(s):  
S. Manjunath ◽  
N. P. Chandrashekara
Keyword(s):  
Aspect Ratio ◽  
Thermal Convection ◽  
Couple Stress ◽  
Numerical Study ◽  
Critical Rayleigh Number ◽  
Vertical Direction ◽  
Heat Conducting ◽  
Linear Temperature ◽  
Vertical Walls ◽  
Vertical Cavity

This paper is a Fourier–series assisted numerical study of two-dimensional thermal convection in Boussinesq–Stokes suspensions occupying a cavity. The suspension is modeled as a couple stress liquid. The horizontal walls of the cavity are assumed to be perfectly heat conducting and the vertical walls are non-uniformly heated to establish a linear temperature in the vertical direction. The critical Rayleigh number is obtained numerically as a function of couple stress parameter and aspect ratio, and the same is plotted graphically. The results of slender vertical cavity, classical Rayleigh-Be´nard convection, rectangular and square cavities of finite aspect-ratio heated from below are obtained as limiting cases of the study.

Fast magnetic field penetration into low resistivity plasma

2017 ◽  
Vol 83 (1) ◽  
Author(s):  
Amnon Fruchtman
Keyword(s):  
Magnetic Field ◽  
Energy Dissipation ◽  
Electric Field ◽  
Density Gradient ◽  
Magnetic Energy ◽  
Measured Velocity ◽  
Magnetic Field Penetration ◽  
The Magnetic Field ◽  
Uniform Plasma ◽  
Field Penetration

Penetration of a magnetic field into plasma that is faster than resistive diffusion can be induced by the Hall electric field in a non-uniform plasma. This mechanism explained successfully the measured velocity of the magnetic field penetration into pulsed plasmas. Major related issues have not yet been resolved. Such is the theoretically predicted, but so far not verified experimentally, high magnetic energy dissipation, as well as the correlation between the directions of the density gradient and of the field penetration.

Sign in / Sign up

Export Citation Format

Share Document