scholarly journals Study of the Optical Properties of Multi-Particle Phosphors by the FDTD and Ray Tracing Combined Method

Photonics ◽  
2020 ◽  
Vol 7 (4) ◽  
pp. 126
Author(s):  
Xinrui Ding ◽  
Changkun Shao ◽  
Shudong Yu ◽  
Binhai Yu ◽  
Zongtao Li ◽  
...  
Keyword(s):  
Optical Properties ◽  
Ray Tracing ◽  
Large Scale ◽  
Fdtd Method ◽  
Particle Method ◽  
Previous Method ◽  
Scattering Data ◽  
Particle Scattering ◽  
Scattering Parameter ◽  
Light Emitting

It is well known that the optical properties of multi-particle phosphor are crucial to the light performance of white light-emitting diodes (LEDs). Note that the optical properties including scattering or absorption properties for a single particle are easy to be calculated. However, due to the large computation considering the complicated re-scattering and re-absorption, it is difficult to calculate the scattering behaviors of the multi-particles. A common method to reduce the computation, which can cause unknown deviations, is to replace the multi-particle scattering properties by using the average scattering data of single particles. In this work, a cluster of multi-phosphor particles are directly simulated by the finite-difference time-domain (FDTD) method. The total scattering data of the cluster was processed as a bulk scattering parameter and imported to the Monte-Carlo ray-tracing (RT) method to realize a large-scale multi-particle scattering calculation. A polynomial mathematical model was built according to the multi-particle scattering data. An experiment was carried out for verifying the accuracy of the method in this work. The mean absolute percentages of the previous method are 1.68, 2.06, and 1.22 times larger than the multi-particle method compared with the experimental curves, respectively.

scholarly journals Efficient and large-area all vacuum-deposited perovskite light-emitting diodes via spatial confinement

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Peipei Du ◽  
Jinghui Li ◽  
Liang Wang ◽  
Liang Sun ◽  
Xi Wang ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
High Efficiency ◽  
Light Emitting Diodes ◽  
Scale Production ◽  
Nonradiative Recombination ◽  
Large Area ◽  
Spatial Confinement ◽  
Light Emitting ◽  
Large Scale Production

AbstractWith rapid advances of perovskite light-emitting diodes (PeLEDs), the large-scale fabrication of patterned PeLEDs towards display panels is of increasing importance. However, most state-of-the-art PeLEDs are fabricated by solution-processed techniques, which are difficult to simultaneously achieve high-resolution pixels and large-scale production. To this end, we construct efficient CsPbBr3 PeLEDs employing a vacuum deposition technique, which has been demonstrated as the most successful route for commercial organic LED displays. By carefully controlling the strength of the spatial confinement in CsPbBr3 film, its radiative recombination is greatly enhanced while the nonradiative recombination is suppressed. As a result, the external quantum efficiency (EQE) of thermally evaporated PeLED reaches 8.0%, a record for vacuum processed PeLEDs. Benefitting from the excellent uniformity and scalability of the thermal evaporation, we demonstrate PeLED with a functional area up to 40.2 cm2 and a peak EQE of 7.1%, representing one of the most efficient large-area PeLEDs. We further achieve high-resolution patterned perovskite film with 100 μm pixels using fine metal masks, laying the foundation for potential display applications. We believe the strategy of confinement strength regulation in thermally evaporated perovskites provides an effective way to process high-efficiency and large-area PeLEDs towards commercial display panels.

scholarly journals Near Unity PLQY and High Stability of Barium Thiocyanate Based All-Inorganic Perovskites and Their Applications in White Light-Emitting Diodes

Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 209
Author(s):  
Gopi Chandra Adhikari ◽  
Saroj Thapa ◽  
Yang Yue ◽  
Hongyang Zhu ◽  
Peifen Zhu
Keyword(s):  
White Light ◽  
Large Scale ◽  
Light Emitting Diode ◽  
Photophysical Properties ◽  
Environmental Stability ◽  
Color Temperature ◽  
Ambient Atmosphere ◽  
Light Emitting ◽  
Halide Perovskite ◽  
Lead Halide

All-inorganic lead halide perovskite (CsPbX3) nanocrystals (NCs) have emerged as a highly promising new generation of light emitters due to their extraordinary photophysical properties. However, the performance of these semiconducting NCs is undermined due to the inherent toxicity of lead and long-term environmental stability. Here, we report the addition of B-site cation and X-site anion (pseudo-halide) concurrently using Ba(SCN)2 (≤50%) in CsPbX3 NCs to reduce the lead and improve the photophysical properties and stability. The as-grown particles demonstrated an analogous structure with an almost identical lattice constant and a fluctuation of particle size without altering the morphology of particles. Photoluminescence quantum yield is enhanced up to near unity (~98%) by taking advantage of concomitant doping at the B- and X-site of the structure. Benefitted from the defect reductions and stronger bonding interaction between Pb2+ and SCN− ions, Ba(SCN)2-based NCs exhibit improved stability towards air and moisture compared to the host NCs. The doped NCs retain higher PLQY (as high as seven times) compared to the host NCs) when stored in an ambient atmosphere for more than 176 days. A novel 3D-printed multiplex color conversion layer was used to fabricate a white light-emitting diode (LED). The obtained white light shows a correlated color temperature of 6764 K, a color rendering index of 87, and luminous efficacy of radiation of 333 lm/W. In summary, this work proposes a facile route to treat sensitive lead halide perovskite NCs and to fabricate LEDs by using a low-cost large-scale 3-D printing method, which would serve as a foundation for fabricating high-quality optoelectronic devices for near future lighting technologies.

scholarly journals Imposed dynamic irradiation to intensify photocatalytic reactions

2021 ◽  
Author(s):  
Fabian Guba ◽  
Florian Gaulhofer ◽  
Dirk Ziegenbalg
Keyword(s):  
Large Scale ◽  
Reaction Rate ◽  
Photochemical Reactions ◽  
Test Reaction ◽  
Light Emitting ◽  
Photochemical Processes ◽  
Spatially Distributed ◽  
Photocatalytic Reactions ◽  
The Impact ◽  
Photonic Efficiency

AbstractDynamic irradiation is a potent option to influence the interaction between photochemical reactions and mass transport to design high performant and efficient photochemical processes. To systematically investigate the impact of this parameter, the photocatalytic reduction of nitrobenzene was conducted as a test reaction. Dynamic irradiation was realized through provoked secondary flow patterns, multiple spatially distributed light emitting diodes (LEDs) and electrical pulsation of LEDs. A combined experimental and theoretical approach revealed significant potential to enhance photochemical processes. The reaction rate was accelerated by more than 70% and even more important the photonic efficiency was increased by more than a factor of 4. This renders imposed dynamic irradiation an innovative and powerful tool to intensify photoreactions on the avenue to large scale sustainable photochemical processes.

OPTICAL PROPERTIES OF GaInN/GaN MULTI-QUANTUM WELL STRUCTURE AND LIGHT EMITTING DIODE GROWN BY METALORGANIC CHEMICAL VAPOR PHASE EPITAXY

2007 ◽  
Vol 17 (01) ◽  
pp. 81-84
Author(s):  
J. Senawiratne ◽  
M. Zhu ◽  
W. Zhao ◽  
Y. Xia ◽  
Y. Li ◽  
...  
Keyword(s):  
Optical Properties ◽  
Quantum Well ◽  
Stark Effect ◽  
Light Emitting Diode ◽  
Chemical Vapor ◽  
Green Emission ◽  
Luminescence Spectroscopy ◽  
Light Emitting ◽  
Quantum Confined Stark Effect ◽  
Multi Quantum Well

Optical properties of green emission Ga 0.80 In 0.20 N/GaN multi-quantum well and light emitting diode have been investigated by using photoluminescence, cathodoluminescence, electroluminescence, and photoconductivity. The temperature dependent photoluminescence and cathodoluminescence studies show three emission bands including GaInN/GaN quantum well emission centered at 2.38 eV (~ 520 nm). The activation energy of the non-radiative recombination centers was found to be ~ 60 meV. The comparison of photoconductivity with luminescence spectroscopy revealed that optical properties of quantum well layers are strongly affected by the quantum-confined Stark effect.

scholarly journals Towards the Optimum Light Source Spectrum

2010 ◽  
Vol 2010 ◽  
pp. 1-9 ◽  
Author(s):  
Andrew Chalmers ◽  
Snjezana Soltic
Keyword(s):  
Light Source ◽  
Large Scale ◽  
Source Spectrum ◽  
Light Sources ◽  
Luminous Efficacy ◽  
Light Emitting ◽  
Spectral Bands ◽  
Good Energy ◽  
Lighting Systems ◽  
Colour Rendering

This paper is concerned with designing light source spectra for optimum luminous efficacy and colour rendering. We demonstrate that it is possible to design light sources that can provide both good colour rendering and high luminous efficacy by combining the outputs of a number of narrowband spectral constituents. Also, the achievable results depend on the numbers and wavelengths of the different spectral bands utilized in the mixture. Practical realization of these concepts has been demonstrated in this pilot study which combines a number of simulations with tests using real LEDs (light emitting diodes). Such sources are capable of providing highly efficient lighting systems with good energy conservation potential. Further research is underway to investigate the practicalities of our proposals in relation to large-scale light source production.

Large-scale synthesis and optical properties of hexagonal GaN micropyramid/nanowire homostructures

2005 ◽  
Vol 17 (1) ◽  
pp. 30-34 ◽  
Author(s):  
Xu Xiang ◽  
Chuanbao Cao ◽  
Yajie Xu ◽  
Hesun Zhu
Keyword(s):  
Optical Properties ◽  
Large Scale ◽  
Large Scale Synthesis
Sign in / Sign up

Export Citation Format

Share Document