scholarly journals Biobased Waterborne Polyurethane-Urea/SWCNT Nanocomposites for Hydrophobic and Electrically Conductive Textile Coatings

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1624
Author(s):  
Amado Lacruz ◽  
Mireia Salvador ◽  
Miren Blanco ◽  
Karmele Vidal ◽  
Amaia M. Goitandia ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Particle Size ◽  
Water Column ◽  
Strain Analysis ◽  
Water Repellency ◽  
Waterborne Polyurethane ◽  
Scanning Calorimetry ◽  
Polyester Polyol ◽  
Water Contact ◽  
Technical Textiles

Waterborne polyurethane-urea dispersions (WPUD), which are based on 100% bio-based semi-crystalline polyester polyol and isophorone diisocyanate, have been successfully synthesized and doped with single-walled carbon nanotubes (SWCNT) to obtain a finishing agent that provides textiles with multifunctional properties. The chemical structure of WPUD has been characterized by Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). The thermal properties have been evaluated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical thermal analysis (DMTA). Mechanical properties have been studied by tensile stress–strain analysis. Moreover, the particle size, particle size distribution (PSD), and stability of developed waterborne dispersions have been assessed by dynamic light scattering (DLS), Z-potential, and accelerated aging tests (analytical centrifugation). Subsequently, selected fabrics have been face-coated by the WPUD using knife coating method and their properties have been assessed by measuring water contact angle (WCA), water column, fabric stiffness, and air permeability. The electrical conductivity of textiles coated with SWCNT-doped WPUD has been evaluated by EN 1149 standard. Finally, the surface morphologies of uncoated and coated fabrics have been studied by scanning electron microscopy (SEM). All of the synthesized polyurethane-ureas provide the coated substrates with remarkable water-repellency and water column, being therefore a more sustainable alternative to waterproof coatings based on fluoropolymers, such as PTFE. The additivation of the polymeric matrices with SWCNT has led to textile coatings with excellent electrical conductivity, maintaining water column properties, giving rise to multifunctional coatings that are highly demanded in protective workwear and technical textiles.

scholarly journals Biobased Waterborne Polyurethane-Ureas Modified with POSS-OH for Fluorine-Free Hydrophobic Textile Coatings

Polymers ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 3526
Author(s):  
Amado Lacruz ◽  
Mireia Salvador ◽  
Miren Blanco ◽  
Karmele Vidal ◽  
Amaia M. Goitandia ◽  
...  
Keyword(s):  
Contact Angle ◽  
Particle Size ◽  
Water Column ◽  
Strain Analysis ◽  
Waterborne Polyurethane ◽  
Scanning Calorimetry ◽  
Polyester Polyol ◽  
Water Contact ◽  
Polymer Backbone ◽  
Technical Textiles

Waterborne polyurethane-urea dispersions (WPUD), which are based on fully biobased amorphous polyester polyol and isophorone diisocyanate (IPDI), have been successfully synthesized obtaining a finishing agent that provides textiles with an enhanced hydrophobicity and water column. Grafting of trans-cyclohexanediol isobutyl POSS (POSS-OH) to the biobased polymer backbone has also been investigated for the first time and its properties compared to a standard chain extender, 1,3-propanediol (PDO). The chemical structure of WPUD has been characterized by Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). The thermal properties have been evaluated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Mechanical properties have been studied by tensile stress–strain analysis. Moreover, the particle size, particle size distribution (PSD), and stability of developed waterborne dispersions have been assessed by dynamic light scattering (DLS), Z-potential, storage aging tests, and accelerated aging tests by analytical centrifuge (LUM). Subsequently, selected fabrics have been face-coated by the WPUD using the knife coating method and their properties have been assessed by measuring the water contact angle (WCA), oil contact angle (OCA), water column, fabric stiffness, air permeability, and water vapor resistance (breathability). Finally, the surface morphology and elemental composition of uncoated and coated fabrics have been studied by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. All of the synthesized polyurethane-ureas provided the coated substrates with a remarkable hydrophobicity and water column, resulting in a more sustainable alternative to waterproof coatings based on fluoropolymers, such as PTFE. Grafting POSS-OH to the polymeric backbone has led to textile coatings with enhanced hydrophobicity, maintaining thermal, mechanical, and water column properties, giving rise to multifunctional coatings that are highly demanded in protective workwear and technical textiles.

Hydrophobic materials based on cotton linter cellulose and an epoxy-activated polyester derived from a suberin monomer

Holzforschung ◽  
2015 ◽  
Vol 69 (6) ◽  
pp. 721-730 ◽  
Author(s):  
Dongfang Li ◽  
Tommy Iversen ◽  
Monica Ek
Keyword(s):  
Water Repellency ◽  
Magic Angle Spinning ◽  
Size Exclusion ◽  
Birch Bark ◽  
Magic Angle ◽  
Scanning Calorimetry ◽  
Outer Bark ◽  
Water Contact ◽  
Flight Mass Spectrometry ◽  
Hydrophobic Materials

Abstract Suberin is a natural hydrophobic material that could be used to improve the water repellency of cellulose surfaces. It is also abundant in the outer bark of birch (Betula verrucosa); birch bark is a side-stream product in Scandinavia from the forest industry, which is generally burned for energy production. A suberin monomer, cis-9,10-epoxy-18-hydroxyoctadecanoic acid, was isolated from birch outer bark and polymerized via lipase (immobilized Candida antarctica lipase B). The resulting epoxy-activated polyester was characterized by nuclear magnetic resonance (NMR) imaging, matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry, and size exclusion chromatography. Then the polyester was cured with tartaric or oxalic acid, and the crosslinked polyesters were characterized by Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry. Hydrophobic materials were prepared by compression molding of polyester-impregnated cellulose sheets, and the final products were characterized by FTIR, cross-polarization magic angle spinning 13C NMR, and field-emission scanning electron microscopy. The water contact angle was significantly increased from 0° for the original cellulose sheets to over 100° for the produced hydrophobic materials.

scholarly journals Towards Novel Fluorinated Methacrylic Coatings for Cultural Heritage: A Combined Polymers and Surfaces Chemistry Study

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1190 ◽  
Author(s):  
Valentina Sabatini ◽  
Eleonora Pargoletti ◽  
Valeria Comite ◽  
Marco Aldo Ortenzi ◽  
Paola Fermo ◽  
...  
Keyword(s):  
Prolonged Exposure ◽  
Accelerated Aging ◽  
Water Repellency ◽  
Size Exclusion ◽  
Butyl Methacrylate ◽  
Capillary Absorption ◽  
Scanning Calorimetry ◽  
Water Contact ◽  
Coated Materials ◽  
Exclusion Chromatography

In this work, new co- and ter-polymers of methyl methacrylate (MMA), ethyl methacrylate (EMA), and N-butyl methacrylate (nBuMA), containing just 1% mol × mol−1 of a fluorinated co-monomer, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl methacrylate (POMA), were synthesized. After an UV accelerated aging test, the photo-chemical stability of the polymers prepared was determined by 1H NMR and FT-IR spectroscopy, size exclusion chromatography, differential scanning calorimetry and wettability measurements. The polymers were applied to Botticino tiles to achieve better performances in terms of water repellency and consequently deterioration resistance. One-year prolonged exposure to a real environment was conducted and the properties of the coated materials and their performances were studied using different surface techniques such as water contact angle (WCA) and colorimetric measurements (CIELaB), capillary absorption, permeability (RVP) tests and soluble salts determination. The effectiveness of the fluorinated methacrylic coatings was clearly demonstrated; among all the resins, the co-polymer MMA_POMA seems to be the most performing one. Furthermore, both the UV photo-chemical resistance and the easiness of removal was successfully studied.

Optimasi Proses Pembuatan dan Karakterisasi Fisik Niosom Sinkonin

2019 ◽  
Vol 16 (2) ◽  
pp. 178
Author(s):  
Hariyanti Hariyanti ◽  
Sophi Damayanti ◽  
Sasanti Tarini
Keyword(s):  
Differential Scanning Calorimetry ◽  
Particle Size ◽  
Hair Follicle ◽  
Scanning Calorimetry ◽  
Span 60

Sinkonin praktis tidak larut dalam air, sedikit larut dalam kloroform dan alkohol. Hal ini berdampak pada rendahnya penetrasi transfollicular sinkonin, karena hanya bahan aktif hidrofilik yang mampu melewati hair follicle. Dengan demikian dibutuhkan satu sistem penghantaran yang mampu menurunkan hidrofobisitas sinkonin untuk meningkatkan penetrasi sinkonin ke follicle. Niosom merupakan vesikel ampifilik dengan struktur lapisan rangkap yang terbentuk dari hidrasi kombinasi surfaktan nonionik dan kolesterol yang mampu menurunkan hidrofobisitas sinkonin. Penelitian ini bertujuan untuk menentukan proses pembuatan niosom sinkonin yang optimum. Pembuatan niosom sinkonin diawali dengan menentukan temperatur gelasi (Tg) dari span 60 dengan Differential Scanning Calorimetry (DSC), kemudian dilanjutkan dengan optimasi proses meliputi: optimasi kecepatan rotavapor pembentukan film lapis tipis, temperatur hidrasi, kecepatan rotavapor hidrasi, waktu hidrasi, dan waktu sonikasi. Karakteristik vesikel niosom yang optimal meliputi: ukuran partikel dan indeks polidispersitas dengan menggunakan Particle Size Analized (PSA) serta efisiensi penjeratan sinkonin dengan menggunakan KCKT. Temperatur gelasi (Tg) span 60 45±2 oC, kecepatan rotavapor pembentukan film lapis tipis niosom 210 rpm, temperatur hidrasi 55±2 oC, kecepatan rotavapor hidrasi 210 rpm, waktu hidrasi 20 menit, waktu sonikasi suspensi niosom 1 menit. Ukuran vesikel yang diperoleh adalah 100–200 nm, indeks polidispersitas 0,2–0,4 dan efisiensi penjeratan niosom sinkonin 84,49±0,0025%. Proses pembuatan niosom sinkonin memiliki pengaruh besar terhadap hasil ukuran vesikel dan efisiensi penjeratan niosom sinkonin.

scholarly journals On the Effectiveness of Oxygen Plasma and Alkali Surface Treatments to Modify the Properties of Polylactic Acid Scaffolds

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1643
Author(s):  
Ricardo Donate ◽  
María Elena Alemán-Domínguez ◽  
Mario Monzón
Keyword(s):  
Surface Properties ◽  
Enzymatic Degradation ◽  
Oxygen Plasma ◽  
Physicochemical Characterization ◽  
Surface Treatments ◽  
Carboxyl Groups ◽  
Scanning Calorimetry ◽  
Water Contact ◽  
Angle Measurements ◽  
3D Printed

Surface modification of 3D-printed PLA structures is a major issue in terms of increasing the biofunctionality and expanding the tissue engineering applications of these parts. In this paper, different exposure times were used for low-pressure oxygen plasma applied to PLA 3D-printed scaffolds. Alkali surface treatments were also evaluated, aiming to compare the modifications introduced on the surface properties by each strategy. Surface-treated samples were characterized through the quantification of carboxyl groups, energy-dispersive X-ray spectroscopy, water contact angle measurements, and differential scanning calorimetry analysis. The change in the surface properties was studied over a two-week period. In addition, an enzymatic degradation analysis was carried out to evaluate the effect of the surface treatments on the degradation profile of the 3D structures. The physicochemical characterization results suggest different mechanism pathways for each type of treatment. Alkali-treated scaffolds showed a higher concentration of carboxyl groups on their surface, which enhanced the enzymatic degradation rate, but were also proven to be more aggressive towards 3D-printed structures. In contrast, the application of the plasma treatments led to an increased hydrophilicity of the PLA surface without affecting the bulk properties. However, the changes on the properties were less steady over time.

scholarly journals Polypropylene/Lignin/POSS Nanocomposites: Thermal and Wettability Properties, Application in Water Remediation

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3950
Author(s):  
Abeer Alassod ◽  
Syed Rashedul Islam ◽  
Mina Shahriari Khalaji ◽  
Rogers Tusiime ◽  
Wanzhen Huang ◽  
...  
Keyword(s):  
Organic Liquid ◽  
Contact Angles ◽  
Water Remediation ◽  
Scanning Calorimetry ◽  
Water Contact ◽  
Thermally Induced ◽  
Dsc Measurements ◽  
Infrared Measurement ◽  
Oligomeric Silsesquioxane ◽  
Tga And Dsc

Compositing is an interesting strategy that has always been employed to introduce or enhance desired functionalities in material systems. In this paper, sponges containing polypropylene, lignin, and octavinyl-polyhedral oligomeric silsesquioxane (OV-POSS) were successfully prepared via an easy and elegant strategy called thermally induced phase separation (TIPS). To fully explore the behaviour of different components of prepared sponges, properties were characterized by a thermogravimetric analyser (TGA), differential scanning calorimetry (DSC), Fourier transform infrared measurement (FTIR), and scanning electron microscopy (SEM). Furthermore, wettability properties toward an organic liquid and oil were investigated. The FTIR analysis confirmed the chemical modification of the components. TGA and DSC measurements revealed thermal stability was much better with an increase in OV-POSS content. OV-POSS modified sponges exhibited ultra-hydrophobicity and high oleophilicity with water contact angles of more than 125°. The SEM revealed that POSS molecules acted as a support for reduced surface roughness. Moreover, OV-POSS-based blend sponges showed higher sorption capacities compared with other blend sponges without OV-POSS. The new blend sponges demonstrated a potential for use as sorbent engineering materials in water remediation.

Simplified estimation of unsaturated soil hydraulic conductivity using bulk electrical conductivity and particle size distribution

Soil Research ◽  
2013 ◽  
Vol 51 (1) ◽  
pp. 23 ◽  
Author(s):  
Mohammad Reza Neyshabouri ◽  
Mehdi Rahmati ◽  
Claude Doussan ◽  
Boshra Behroozinezhad
Keyword(s):  
Electrical Conductivity ◽  
Particle Size ◽  
Hydraulic Conductivity ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Unsaturated Soil ◽  
Soil Core ◽  
Soil Hydraulic Conductivity ◽  
Core Samples ◽  
Soil Hydraulic

Unsaturated soil hydraulic conductivity K is a fundamental transfer property of soil but its measurement is costly, difficult, and time-consuming due to its large variations with water content (θ) or matric potential (h). Recently, C. Doussan and S. Ruy proposed a method/model using measurements of the electrical conductivity of soil core samples to predict K(h). This method requires the measurement or the setting of a range of matric potentials h in the core samples—a possible lengthy process requiring specialised devices. To avoid h estimation, we propose to simplify that method by introducing the particle-size distribution (PSD) of the soil as a proxy for soil pore diameters and matric potentials, with the Arya and Paris (AP) model. Tests of this simplified model (SM) with laboratory data on a broad range of soils and using the AP model with available, previously defined parameters showed that the accuracy was lower for the SM than for the original model (DR) in predicting K (RMSE of logK = 1.10 for SM v. 0.30 for DR; K in m s–1). However, accuracy was increased for SM when considering coarse- and medium-textured soils only (RMSE of logK = 0.61 for SM v. 0.26 for DR). Further tests with 51 soils from the UNSODA database and our own measurements, with estimated electrical properties, confirmed good agreement of the SM for coarse–medium-textured soils (<35–40% clay). For these textures, the SM also performed well compared with the van Genuchten–Mualem model. Error analysis of SM results and fitting of the AP parameter showed that most of the error for fine-textured soils came from poorer adequacy of the AP model’s previously defined parameters for defining the water retention curve, whereas this was much less so for coarse-textured soils. The SM, using readily accessible soil data, could be a relatively straightforward way to estimate, in situ or in the laboratory, K(h) for coarse–medium-textured soils. This requires, however, a prior check of the predictive efficacy of the AP model for the specific soil investigated, in particular for fine-textured/structured soils and when using previously defined AP parameters.

Chitosan nanoparticles for tamoxifen delivery and cytotoxicity to MCF-7 and Vero cells

2011 ◽  
Vol 83 (11) ◽  
pp. 2027-2040 ◽  
Author(s):  
Neralakere Ramanna Ravikumara ◽  
Basavaraj Madhusudhan
Keyword(s):  
Particle Size ◽  
Chitosan Nanoparticles ◽  
Vero Cells ◽  
In Vitro Cytotoxicity ◽  
Correlation Spectroscopy ◽  
Scanning Calorimetry ◽  
Ζ Potential ◽  
Human Red Blood Cells ◽  
Tamoxifen Citrate

In this study, tamoxifen citrate-loaded chitosan nanoparticles (tamoxcL-ChtNPs) and tamoxifen citrate-free chitosan nanoparticles (tamoxcF-ChtNPs) were prepared by an ionic gelation (IG) method. The physicochemical properties of the nanoparticles were analyzed for particle size, zeta (ζ) potential, and other characteristics using photon correlation spectroscopy (PCS), zeta phase analysis light scattering (PALS), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and differential scanning calorimetry (DSC). The variation in particle size was assessed by changing the concentration of chitosan, pentasodium tripolyphosphate (TPP), and the pH of the solution. The optimized tamoxcL-ChtNPs showed mean diameter of 187 nm, polydispersity of 0.125, and ζ-potential of +19.1 mV. The encapsulation efficiency (EE) of tamoxifen citrate (tamoxc) increased at higher concentrations, and release of tamoxc from the chitosan matrix displayed controlled biphasic behavior. Those tamoxcL-ChtNPs tested for chemosensitivity showed dose- and time-dependent antiproliferative activity of tamoxc. Further, tamoxcL-ChtNPs were found to be hemocompatible with human red blood cells (RBCs) and safe by in vitro cytotoxicity tests, suggesting that they offer promise as drug delivery systems in therapy.

Evidence for physical and chemical stratification in Lake Untersee (central Dronning Maud Land, East Antarctica)

1997 ◽  
Vol 9 (1) ◽  
pp. 43-45 ◽  
Author(s):  
U. Wand ◽  
G. Schwarz ◽  
E. Brüggemann ◽  
K. Bräuer
Keyword(s):  
Electrical Conductivity ◽  
Dissolved Oxygen ◽  
Water Column ◽  
Water Body ◽  
East Antarctica ◽  
Bacterial Sulphate Reduction ◽  
Chemical Stratification ◽  
Dronning Maud Land ◽  
Physical And Chemical ◽  
Vertical Gradients

Lake Untersee is the largest freshwater lake in the interior of East Antarctica. It is a perennially ice-covered, max. 169 m deep, ultra-oligotrophic lake. In contrast to earlier studies, we found clear evidence for physical and chemical stratification in the summer of 1991–92. However, the stratification was restricted to a trough, c. 500 m wide and up to 105 m deep, in the south-western part of the lake. There, the water body was distinctly stratified as indicated by sharp vertical gradients of temperature, pH, dissolved oxygen, and electrical conductivity. The water column was anoxic below 80 m. The chemical stratification is also indicated by changes of ionic ratios. Moreover, there was some evidence for methanogenesis and bacterial sulphate reduction in Lake Untersee.

Sign in / Sign up

Export Citation Format

Share Document