scholarly journals Effects of Printing Temperature and Filling Percentage on the Mechanical Behavior of Fused Deposition Molding Technology Components for 3D Printing

Polymers ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2910
Author(s):  
Ming-Hsien Hsueh ◽  
Chao-Jung Lai ◽  
Kuan-Yin Liu ◽  
Cheng-Feng Chung ◽  
Shi-Hao Wang ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Uv Curing ◽  
Raw Material ◽  
Biological Research ◽  
Curing Process ◽  
Fused Deposition ◽  
Uv Curing Process

Additive manufacturing (AM) has the advantages of providing materials with lightweight microporous structures and customized features, and being environmentally safe. It is widely used in medical sciences, the aerospace industry, biological research, engineering applications, and other fields. Among the many additive manufacturing methods, fused deposition modeling (FDM) is relatively low-cost, wastes less raw material and has a lower technical threshold. This paper presents a study on 3D printing based on FDM by changing two printing parameters, namely the printing temperature and filling percentage. The produced polylactic acid (PLA) material was analyzed through tensile and Shore D hardness tests and the differences in mechanical properties before and after the UV curing process were analyzed. The results show that increasing the filling percentage or increasing the printing temperature can effectively improve the tensile Young’s modulus, ultimate tensile strength, elongation, and Shore hardness of the material. The UV curing process could enhance the rigidity and hardness of the material significantly but reduced the strength and toughness of the material. These findings could benefit researchers studying FDM with the goal of achieving sustainable manufactured materials.

Design, Development and Characterization of Linear, Soft Actuators via Additive Manufacturing

2018 ◽  
Author(s):  
Alfonso Costas ◽  
Daniel E. Davis ◽  
Yixian Niu ◽  
Sadegh Dabiri ◽  
Jose Garcia ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Single Step ◽  
Design Development ◽  
Initial Attempt ◽  
Fused Deposition ◽  
Piston Cylinder ◽  
Compact Size ◽  
Soft Actuators

Additive manufacturing has emerged as an alternative to traditional manufacturing technologies. In particular, industries like fluid power, aviation and robotics have the potential to benefit greatly from this technology, due to the design flexibility, weight reduction and compact size that can be achieved. In this work, the design process and advantages of using 3D printing to make soft linear actuators were studied and highlighted. This work explored the limitations of current additive manufacturing tolerances to fabricate a typical piston-cylinder assembly, and how enclosed bellow actuators could be used to overcome high leakage and friction issues experienced with a piston-cylinder type actuator. To do that, different 3D printing technologies were studied and evaluated (stereolithorgraphy and fused deposition modeling) in the pursuit of high-fidelity, cost-effective 3D printing. The initial attempt consisted of printing the soft actuators directly using flexible materials in a stereolithography-type 3D printer. However, these actuators showed low durability and poor performance. The lack of a reliable resin resulted in the replacement of this material by EcoFlex® 00-30 silicone and the use of a 3D printed mold to cast the actuators. These molds included a 3-D printed dissolvable core inside the cast actuator in order to finish the manufacturing process in one single step. An experimental setup to evaluate the capabilities of these actuators was developed. Results are shown to assess the steady-state and the dynamic characteristics of these actuators. These tests resulted into the stroke-pressure and stroke-time responses for a specific load given different proportional valve inputs.

Incorporation of fluorescent quantum dots for 3D printing and additive manufacturing applications

2018 ◽  
Vol 6 (28) ◽  
pp. 7584-7593 ◽  
Author(s):  
Cole D. Brubaker ◽  
Talitha M. Frecker ◽  
James R. McBride ◽  
Kemar R. Reid ◽  
G. Kane Jennings ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Quantum Dot ◽  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Cadmium Sulfur Selenide ◽  
Functionalized Materials ◽  
Deposition Modeling ◽  
Manufacturing Applications

3D printing of cadmium sulfur selenide quantum dot functionalized materials compatible with fused deposition modeling type processes and applications.

scholarly journals Experience of implementation in educational process modern technologies of FDM 3D printing

2021 ◽  
pp. 55-59
Author(s):  
Petr Andrienko ◽  
Vladimir Vasilevskij ◽  
Ivan Vittsivskyi
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Current Transformer ◽  
Educational Process ◽  
Small Scale ◽  
Thermoplastic Material ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Modern Technologies

Fused Deposition Modeling is an additive manufacturing technology where a temperature-controlled head extrudes a thermoplastic material onto a build platform in a predetermined path. Standard, advanced thermoplastics and composites are used for printing. Among the areas of application for FDM printing, the main ones are rapid prototyping, as well as small-scale and batch production. The purpose of the work is the implementation of FDM 3D printing technology in the educational process of students in specialty 141 "Electroenergy, electrotechnics and electromechanics". The features of the technology of additive manufacturing of electrical apparatuses parts by the method of FDM printing have been investigated. Parts of four standard sizes were printed using ABS + and PLA plastics, namely, current transformer carcasses in the amount of 110 pieces and sensor bodies in the amount of 100 pieces. For printing, an FDM 3D printer was used built on the XZ Head Y Bed kinematic scheme with an open working chamber. The analysis of defects in finished products was carried out, which showed that the main defects are deviations of the actual dimensions and geometric shape of the finished products. Ways to prevent the occurrence of these defects are considered, namely, correcting the size of the model at the stage of preparing the model for printing, minimizing the filling density of the model, using brims in models, setting the optimal temperature of the working platform and simultaneously printing several products. The results of the study o features of the technology of additive manufacturing of electrical apparatuses parts by the method of FDM printing made it possible to develop a set of laboratory works for students of the specialty 141 "Electroenergy, electrotechnics and electromechanics".

scholarly journals Low-Cost Additive Manufacturing Techniques Applied to the Design of Planar Microwave Circuits by Fused Deposition Modeling

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1946 ◽  
Author(s):  
Héctor García-Martínez ◽  
Ernesto Ávila-Navarro ◽  
Germán Torregrosa-Penalva ◽  
Alberto Rodríguez-Martínez ◽  
Carolina Blanco-Angulo ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Process ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Microwave Frequency ◽  
Microwave Circuits ◽  
Fused Deposition ◽  
Microwave Electronic ◽  
Deposition Modeling ◽  
Manufacturing Techniques

This work presents a study on the implementation and manufacturing of low-cost microwave electronic circuits, made with additive manufacturing techniques using fused deposition modeling (FDM) technology. First, the manufacturing process of substrates with different filaments, using various options offered by additive techniques in the manufacture of 3D printing parts, is described. The implemented substrates are structurally analyzed by ultrasound techniques to verify the correct metallization and fabrication of the substrate, and the characterization of the electrical properties in the microwave frequency range of each filament is performed. Finally, standard and novel microwave filters in microstrip and stripline technology are implemented, making use of the possibilities offered by additive techniques in the manufacturing process. The designed devices were manufactured and measured with good results, which demonstrates the possibility of using low-cost 3D printers in the design process of planar microwave circuits.

Recycling of PA-12 in Additive Manufacturing and the Improvement of its Mechanical Properties

2016 ◽  
Vol 674 ◽  
pp. 9-14 ◽  
Author(s):  
Piret Mägi ◽  
Andres Krumme ◽  
Meelis Pohlak
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Selective Laser Sintering ◽  
Raw Material ◽  
Positive Finding ◽  
Polyamide 12 ◽  
Fused Deposition ◽  
Micro Injection Moulding ◽  
Moulding Machine

This study explores possible ways to make Additive Manufacturing (AM) a cradle-to-cradle process, that is, use the leftover from one process as the raw material for another process. The main goal of this study is to develop a set of new polymeric blends with innovative properties, suitable for using in 3-D printing of prosthetic limbs using Fused Deposition Modeling (FDM) technology. Sustainable acting is achieved by reusing polymeric material left over from Selective Laser Sintering (SLS) processes for making raw material for FDM processes. Test specimens of polyamide 12 (PA-12) in its virgin form and used- , un-sintered form alongside specimens of used PA blended with TPU, aramid, or graphite, were produced in a micro-injection moulding machine and then tested for their mechanical properties. This paper provides information about the differences in mechanical characteristics of these different material blends. An unexpected but positive finding was that the differences between virgin and recycled PA-12 are insignificant. The aforementioned additives influenced PA-12 by producing specimens that responded with predictable characteristics which is a significant accomplishment as it lays the groundwork for the next stages of the project.

scholarly journals 3D printers in dentistry: a review of additive manufacturing techniques and materials

2021 ◽  
Author(s):  
Leonardo Portilha Gomes da Costa ◽  
Stephanie Isabel Díaz Zamalloa ◽  
Fernando Amorim Mendonça Alves ◽  
Renan Spigolon ◽  
Leandro Yukio Mano ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Dental Materials ◽  
Clinical Results ◽  
Digital Light Processing ◽  
Fused Deposition ◽  
3D Printers ◽  
Manufacturing Techniques ◽  
Printed Materials

3D printers manufacture objects used in various dental specialties. Objective: This literature review aims to explore different techniques of current 3D printers and their applications in printed materials for dental purposes. Methods: The online PubMed databases were searched aiming to find applications of different 3D printers in the dental area. The keywords searched were 3D printer, 3D printing, additive manufacturing, rapid prototyping, 3D prototyping, dental materials and dentistry. Results: From the search results, we describe Stereolithography (SLA), Digital Light Processing (DLP), Material Jetting (MJ), Fused Deposition Modeling (FDM), Binder Jetting (BJ) and Dust-based printing techniques. Conclusion: 3D printing enables different additive manufacturing techniques to be used in dentistry, providing better workflows and more satisfying clinical results.

scholarly journals An overview on 3D Printed Medicine

2021 ◽  
Vol 18 (1) ◽  
pp. 07-13
Author(s):  
Neha Thakur ◽  
Hari Murthy
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Selective Laser Sintering ◽  
Three Dimensional ◽  
Herbal Medicines ◽  
Fused Deposition ◽  
Digitally Controlled ◽  
3D Printed ◽  
Semi Solid

Three-dimensional printing (3DP) is a digitally-controlled additive manufacturing technique used for fast prototyping. This paper reviews various 3D printing techniques like Selective Laser Sintering (SLS), Fused Deposition Modeling, (FDM), Semi-solid extrusion (SSE), Stereolithography (SLA), Thermal Inkjet (TIJ) Printing, and Binder jetting 3D Printing along with their application in the field of medicine. Normal medicines are based on the principle of “one-size-fits-all”. This is not true always, it is possible medicine used for curing one patient is giving some side effects to another. To overcome this drawback “3D Printed medicines” are developed. In this paper, 3D printed medicines forming different Active Pharmaceutical Ingredients (API) are reviewed. Printed medicines are capable of only curing the diseases, not for the diagnosis. Nanomedicines have “theranostic” ability which combines therapeutic and diagnostic. Nanoparticles are used as the drug delivery system (DDS) to damaged cells’ specific locations. By the use of nanomedicine, the fast recovery of the disease is possible. The plant-based nanoparticles are used with herbal medicines which give low-cost and less toxic medication called nanobiomedicine. 4D and 5D printing technology for the medical field are also enlightened in this paper.

scholarly journals Molds with Advanced Materials for Carbon Fiber Manufacturing with 3D Printing Technology

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3700
Author(s):  
Patrich Ferretti ◽  
Gian Maria Santi ◽  
Christian Leon-Cardenas ◽  
Marco Freddi ◽  
Giampiero Donnici ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
3D Printing ◽  
Surface Finish ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Deposition Process ◽  
Advanced Materials ◽  
Fused Deposition ◽  
Good Surface ◽  
Fiber Manufacturing

Fused Deposition Modeling (FDM) 3D printing is the most widespread technology in additive manufacturing worldwide that thanks to its low costs, finished component applications, and the production process of other parts. The need for lighter and higher-performance components has led to an increased usage of polymeric matrix composites in many fields ranging from automotive to aerospace. The molds used to manufacture these components are made with different technologies, depending on the number of pieces to be made. Usually, they are fiberglass molds with a thin layer of gelcoat to lower the surface roughness and obtain a smooth final surface of the component. Alternatively, they are made from metal, thus making a single carbon fiber prototype very expensive due to the mold build. Making the mold using FDM technology can be a smart solution to reduce costs, but due to the layer deposition process, the roughness is quite high. The surface can be improved by reducing the layer height, but it is still not possible to reach the same degree of surface finish of metallic or gelcoat molds without the use of fillers. Thermoplastic polymers, also used in the FDM process, are generally soluble in specific solvents. This aspect can be exploited to perform chemical smoothing of the external surface of a component. The combination of FDM and chemical smoothing can be a solution to produce low-cost molds with a very good surface finish.

scholarly journals Study of mechanical parameters of different densities printed structures

Mechanik ◽  
2017 ◽  
Vol 90 (11) ◽  
pp. 1072-1074 ◽  
Author(s):  
Jerzy Madej ◽  
Mateusz Śliwka
Keyword(s):  
3D Printing ◽  
Porous Structure ◽  
Numerical Simulations ◽  
Fused Deposition Modeling ◽  
Raw Material ◽  
Mechanical Parameters ◽  
Strength Parameters ◽  
Fused Deposition ◽  
Strength Tests ◽  
Deposition Modeling

Based on the strength tests of porous structure samples printed in FDM technology (fused deposition modeling) from PC/ABS filaments, numerical simulations of bending spring beams for two different filling densities, have been performed. The results of numerical analyzes have been verified experimentally and compared with those obtained with the commercial strength parameters of the raw material used for printing. Conducted and planned studies will allow to develop a methodology for calculating the porous structure created in 3D printing technology.

Finite Element Analysis of Additive Manufacturing Based on Fused Deposition Modeling: Distortions Prediction and Comparison With Experimental Data

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Alberto Cattenone ◽  
Simone Morganti ◽  
Gianluca Alaimo ◽  
Ferdinando Auricchio
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Step Size ◽  
Time Step ◽  
Time Step Size ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
The Impact ◽  
Functional Components

Additive manufacturing (or three-dimensional (3D) printing) is constantly growing as an innovative process for the production of complex-shape components. Among the seven recognized 3D printing technologies, fused deposition modeling (FDM) covers a very important role, not only for producing representative 3D models, but, mainly due to the development of innovative material like Peek and Ultem, also for realizing structurally functional components. However, being FDM a production process involving high thermal gradients, non-negligible deformations and residual stresses may affect the 3D printed component. In this work we focus on meso/macroscopic simulations of the FDM process using abaqus software. After describing in detail the methodological process, we investigate the impact of several parameters and modeling choices (e.g., mesh size, material model, time-step size) on simulation outcomes and we validate the obtained results with experimental measurements.

Sign in / Sign up

Export Citation Format

Share Document