scholarly journals Hydrothermally Reduced Graphene Hydrogel Intercalated with Divalent Ions for Dye Adsorption Studies

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 169
Author(s):  
Alvin Lim Teik Zheng ◽  
Supakorn Boonyuen ◽  
Teruhisa Ohno ◽  
Yoshito Andou
Keyword(s):  
Surface Area ◽  
Photoelectron Spectroscopy ◽  
Dye Adsorption ◽  
Textural Properties ◽  
Diffusion Kinetic ◽  
X Ray ◽  
Dye Pollutants ◽  
Reduced Graphene ◽  
Infrared Spectrometer ◽  
Pseudo Second Order

Fundamental studies involving divalent ion intercalated graphene-based hydrogel are still lacking in terms of their adsorption behavior towards dye pollutants. In this study, we prepared a self-assembled Mg2+ and Ca2+ intercalated reduced graphene hydrogel (rGH) using hydrothermal treatment to evaluate the intercalation impact on the adsorption capability towards cationic dyes, methylene blue and rhodamine B. The morphological, structural, thermal, and textural properties of the divalent ion intercalated reduced graphene hydrogels were studied using Fourier transform infrared spectrometer, thermogravimetric analysis, Raman spectroscopy, scanning electron microscope-energy dispersive spectroscopy, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller surface area analysis, and X-ray diffraction. The increased adsorption capacity of the divalent ion intercalated reduced graphene-based hydrogels towards the dye molecules resulted from the increase in the specific surface area and pore volume due to the Mg2+ and Ca2+ bridging that formed spaces between the graphene sheets framework. Adsorption kinetics and the equilibrium adsorption isotherm were fitted by a pseudo-second-order alongside intraparticle diffusion kinetic models and Langmuir isotherm respectively. In addition, the divalent ion intercalated reduced graphene hydrogel showed good generation after three cycles of simultaneous adsorption.

scholarly journals Adsorption of As(V) by the Novel and Efficient Adsorbent Cerium-Manganese Modified Biochar

Water ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2720
Author(s):  
Ting Liang ◽  
Lianfang Li ◽  
Changxiong Zhu ◽  
Xue Liu ◽  
Hongna Li ◽  
...  
Keyword(s):  
Manganese Oxide ◽  
Photoelectron Spectroscopy ◽  
Water Environment ◽  
Polluted Water ◽  
X Ray ◽  
Modified Biochar ◽  
Wide Ph Range ◽  
Infrared Spectrometer ◽  
Pseudo Second Order ◽  
Ph Range

Arsenic has become a global concern in water environment, and it is essential to develop efficient remediation methods. In this study, a novel adsorbent by loading cerium and manganese oxide onto wheat straw-modified biochar (MBC) was manufactured successfully aiming to remove arsenic from polluted water. Through scanning electron microscopy and energy-dispersive spectroscopy (SEM-EDS), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrometer (FT-IR), and other techniques, it was found the loading of cerium and manganese oxide on MBC played a significant role in As(V) adsorption. The results of the batch test showed that the adsorption of MBC followed the pseudo-second order kinetics and Langmuir equation. The adsorption capacity of MBC was 108.88 mg As(V)/g at pH = 5.0 (C0 = 100 mg/L, dosage = 0.5 g/L, T = 298 K) with considerable improvement compared to the original biochar. Moreover, MBC exhibited excellent performance over a wide pH range (2.0~11.0). Thermodynamics of the sorption reaction showed that the entropy (ΔS), changes of enthalpy (ΔH) and Gibbs free energy (ΔG), respectively, were 85.88 J/(moL·K), 22.54 kJ/mol and −1.33 to −5.20 kJ/mol at T = 278~323 K. During the adsorption, the formation of multiple complexes under the influence of its abundant surface M-OH (M represents the Ce/Mn) groups involving multiple mechanisms that included electrostatic interaction forces, surface adsorption, redox reaction, and surface complexation. This study indicated that MBC is a promising adsorbent to remove As(V) from polluted water and has great potential in remediating of arsenic contaminated environment.

Physicochemical Properties of Oxalic Acid-Modified Chitosan/Neem Leave Composites from Pessu River Crab Shell

2019 ◽  
Vol 17 (9) ◽  
Author(s):  
Oluwadayo Francis Asokogene ◽  
Muhammad Abbas Ahmad Zaini ◽  
Misau Muhammad Idris ◽  
Surajudeen Abdulsalam ◽  
Aliyu El-Nafaty Usman
Keyword(s):  
Methylene Blue ◽  
Oxalic Acid ◽  
Surface Area ◽  
Dye Adsorption ◽  
Textural Properties ◽  
Bet Surface Area ◽  
Blue Dye ◽  
Crab Shell ◽  
Sem Images ◽  
X Ray

Abstract This study was aimed to evaluate the characteristics of chitosan from Pessu river crab shell and its derivatives as prospective adsorbent. The synthesized chitosan (CH) was modified with 10 % (w/v) oxalic acid (CHOx), while the composites (CHOx-ANL1, CHOx-ANL2 and CHOx-ANL3) were designated according to the amount of activated neem leave (ANL). The materials were characterized by Fourier transform infrared (FTIR), energy-dispersive X-ray (EDAX), X-ray diffraction (XRD), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET), thermal gravimetric (TGA) and methylene blue dye adsorption. The FTIR spectra of chitosan samples show the characteristics of primary and secondary amine/amide groups. The SEM images exhibit a tight, porous and fractured surface, which is covered with activated neem leave for the composites. The BET surface area of chitosan materials is in the increasing order of, CH < CHOx-ANL1 < CHOx-ANL2 < CHOx < CHOx-ANL3. CHOx-ANL3 displays a higher surface area of 389 m2/g, and 70.9 % mesoporosity. Despite its lower surface area of 258 m2/g (65.4 % mesoporosity), CHOx-ANL1 exhibits a greater methylene blue adsorption of 90.8 mg/g at dye concentration of 300 mg/L. The possible removal mechanisms include ionic interaction between dye molecules and functional groups, and surface adsorption due to the textural properties of chitosan samples. Chitosan from Pessu river crab shell and its derivatives are promising adsorbent candidate for dyes and heavy metals removal from water.

Flower Buds Like MgO Nanoparticles: From Characterisation to Indigo Carmine Elimination

2018 ◽  
Vol 73 (11) ◽  
pp. 975-983 ◽  
Author(s):  
A. Modwi ◽  
L. Khezami ◽  
Kamal K. Taha ◽  
Hajo Idriss
Keyword(s):  
Surface Area ◽  
High Surface ◽  
Indigo Carmine ◽  
High Surface Area ◽  
Dye Adsorption ◽  
Nitrogen Adsorption ◽  
Magnesium Carbonate ◽  
Flower Buds ◽  
X Ray ◽  
Pseudo Second Order

AbstractHere, we demonstrate a pyrolysis route for the synthesis of flower buds like magnesium oxide nanoparticles using a magnesium carbonate precursor without additional chemicals. The effect of heating at different time intervals upon the structure and morphology of the acquired nanostructures were investigated via X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis and Fourier transformation infrared spectroscopy. Nitrogen adsorption was employed to study its porosity. The obtained data confirmed the formation of target nanoparticles that exhibited increasing sizes as pyrolysis time was lengthened. As a consequence a high surface area up to 27 m2 g−1 was recorded for the sample heated for 1 h duration. Furthermore, Indigo Carmine dye adsorption was carried out using the largest surface area species which showed an adsorption capacity of 158 mg g−1. The adsorption was found to comply with the Langmuir isotherm and it follows the pseudo-second-order kinetics. The diffusion process showed intra-particle along with film diffusion mode.

scholarly journals Synthesis, Characterization, and Adsorptive Properties of Fe3O4/GO Nanocomposites for Antimony Removal

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Xiuzhen Yang ◽  
Tengzhi Zhou ◽  
Bozhi Ren ◽  
Zhou Shi ◽  
Andrew Hursthouse
Keyword(s):  
Photoelectron Spectroscopy ◽  
Adsorption Process ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Number Of Factors ◽  
Infrared Spectrometer ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Solid Liquid ◽  
Solid Liquid Separation

A magnetic Fe3O4/GO composite with potential for rapid solid-liquid separation through a magnetic field was synthesized using GO (graphene oxide) and Fe3O4 (ferriferous oxide). Characterization of Fe3O4/GO used scanning electron microscope (SEM), X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FT-IR), and Vibrating Sample Magnetometer (VSM). A number of factors such as pH and coexisting ions on adsorbent dose were tested in a series of batch experiments. The results showed that GO and Fe3O4 are strongly integrated. For pH values in the range of 3.0~9.0, the removal efficiency of Sb(III) using the synthesized Fe3O4/GO remained high (95%). The adsorption showed good fit to a pseudo-second-order and Langmiur model, with the maximum adsorption capacity of 9.59 mg/g maintained across pH 3.0–9.0. Thermodynamic parameters revealed that the adsorption process was spontaneous and endothermic. Analysis by X-ray photoelectron spectroscopy (XPS) showed that the adsorption process is accompanied by a redox reaction.

scholarly journals Pristine and Magnetic Kenaf Fiber Biochar for Cd2+ Adsorption from Aqueous Solution

2021 ◽  
Vol 18 (15) ◽  
pp. 7949
Author(s):  
Anwar Ameen Hezam Saeed ◽  
Noorfidza Yub Harun ◽  
Suriati Sufian ◽  
Muhammad Roil Bilad ◽  
Zaki Yamani Zakaria ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Textural Properties ◽  
Ion Concentration ◽  
Solution Temperature ◽  
Maximum Adsorption Capacity ◽  
Magnetic Biochar ◽  
X Ray ◽  
Study Results ◽  
Capacity Surface

Development of strategies for removing heavy metals from aquatic environments is in high demand. Cadmium is one of the most dangerous metals in the environment, even under extremely low quantities. In this study, kenaf and magnetic biochar composite were prepared for the adsorption of Cd2+. The synthesized biochar was characterized using (a vibrating-sample magnetometer VSM), Scanning electron microscopy (SEM), X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The adsorption batch study was carried out to investigate the influence of pH, kinetics, isotherm, and thermodynamics on Cd2+ adsorption. The characterization results demonstrated that the biochar contained iron particles that help in improving the textural properties (i.e., surface area and pore volume), increasing the number of oxygen-containing groups, and forming inner-sphere complexes with oxygen-containing groups. The adsorption study results show that optimum adsorption was achieved under pH 5–6. An increase in initial ion concentration and solution temperature resulted in increased adsorption capacity. Surface modification of biochar using iron oxide for imposing magnetic property allowed for easy separation by external magnet and regeneration. The magnetic biochar composite also showed a higher affinity to Cd2+ than the pristine biochar. The adsorption data fit well with the pseudo-second-order and the Langmuir isotherm, with the maximum adsorption capacity of 47.90 mg/g.

scholarly journals Analysis of Reduced Graphene Oxides by X-ray Photoelectron Spectroscopy and Electrochemical Capacitance

2013 ◽  
Vol 42 (8) ◽  
pp. 924-926 ◽  
Author(s):  
Michio Koinuma ◽  
Hikaru Tateishi ◽  
Kazuto Hatakeyama ◽  
Shinsuke Miyamoto ◽  
Chikako Ogata ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Graphene Oxides ◽  
Electrochemical Capacitance ◽  
X Ray ◽  
Reduced Graphene ◽  
Reduced Graphene Oxides

FeYO3@rGO nanocomposites: Synthesis, characterization and application in photooxidative degradation of atrazine under visible light

2021 ◽  
Vol 11 (5) ◽  
pp. 706-716
Author(s):  
Nada D. Al-Khthami ◽  
Tariq Altalhi ◽  
Mohammed Alsawat ◽  
Mohamed S. Amin ◽  
Yousef G. Alghamdi ◽  
...  
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Bandgap Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Structural Surface ◽  
Adsorption Desorption

Different organic pollutants have been remediated photo catalytically by applying perovskite photocatalysts. Atrazine (ATR) is a pesticide commonly detected as a pollutant in drinking, surface and ground water. Herein, FeYO3@rGO heterojunction was synthesized and applied for photooxidation decomposition of ATR. First, FeYO 3nanoparticles (NPs) were prepared via routine sol-gel. After that, FeYO3 NPs were successfully incorporated with different percentages (5, 10, 15 and 20 wt.%) of reduced graphene oxide (rGO) in the synthesis of novel FeYO3@rGO photocatalyst. Morphological, structural, surface, optoelectrical and optical characteristics of constructed materials were identified via X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM), adsorption/desorption isotherms, diffusive reflectance (DR) spectra, and photoluminescence response (PL). Furthermore, photocatalytic achievement of the constructed materials was evaluated via photooxidative degradation of ATR. Various investigations affirmed the usefulness of rGO incorporation on the advancement of formed photocatalysts. Actually, novel nanocomposite containing rGO (15 wt.%) possessed diminished bandgap energy, as well as magnified visible light absorption. Furthermore, such nanocomposite presented exceptional photocatalytic achievement when exposed to visible light as ATR was perfectly photooxidized over finite amount (1.6 g · L-1) from the optimized photocatalyst when illuminated for 30 min. The advanced photocatalytic performance of constructed heterojunctions could be accredited mainly to depressed recombination amid induced charges. The constructed FeYO3@rGO nanocomposite is labelled as efficient photocatalyst for remediation of herbicides from aquatic environments.

scholarly journals Facile Preparation of Rod-like MnO Nanomixtures via Hydrothermal Approach and Highly Efficient Removal of Methylene Blue for Wastewater Treatment

Nanomaterials ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 10 ◽  
Author(s):  
Yuelong Xu ◽  
Bin Ren ◽  
Ran Wang ◽  
Lihui Zhang ◽  
Tifeng Jiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Degradation Mechanism ◽  
Dye Adsorption ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Transmission Electron ◽  
Degradation Ratio ◽  
Hydrothermal Approach

In the present study, nanoscale rod-shaped manganese oxide (MnO) mixtures were successfully prepared from graphitic carbon nitride (C3N4) and potassium permanganate (KMnO4) through a hydrothermal method. The as-prepared MnO nanomixtures exhibited high activity in the adsorption and degradation of methylene blue (MB). The as-synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), surface area analysis, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Furthermore, the effects of the dose of MnO nanomixtures, pH of the solution, initial concentration of MB, and the temperature of MB removal in dye adsorption and degradation experiments was investigated. The degradation mechanism of MB upon treatment with MnO nanomixtures and H2O2 was studied and discussed. The results showed that a maximum adsorption capacity of 154 mg g−1 was obtained for a 60 mg L−1 MB solution at pH 9.0 and 25 °C, and the highest MB degradation ratio reached 99.8% under the following optimum conditions: 50 mL of MB solution (20 mg L−1) at room temperature and pH ≈ 8.0 with 7 mg of C, N-doped MnO and 0.5 mL of H2O2.

scholarly journals Organosilane-functionalization of nanostructured indium tin oxide films

2016 ◽  
Vol 6 (6) ◽  
pp. 20160056 ◽  
Author(s):  
R. Pruna ◽  
F. Palacio ◽  
M. Martínez ◽  
O. Blázquez ◽  
S. Hernández ◽  
...  
Keyword(s):  
Surface Area ◽  
Indium Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Electrochemical Impedance ◽  
Annealing Treatment ◽  
Electrochemical Analysis ◽  
Cyclic Voltammograms ◽  
X Ray ◽  
Chip Technology ◽  
Significant Difference

Fabrication and organosilane-functionalization and characterization of nanostructured ITO electrodes are reported. Nanostructured ITO electrodes were obtained by electron beam evaporation, and a subsequent annealing treatment was selectively performed to modify their crystalline state. An increase in geometrical surface area in comparison with thin-film electrodes area was observed by atomic force microscopy, implying higher electroactive surface area for nanostructured ITO electrodes and thus higher detection levels. To investigate the increase in detectability, chemical organosilane-functionalization of nanostructured ITO electrodes was performed. The formation of 3-glycidoxypropyltrimethoxysilane (GOPTS) layers was detected by X-ray photoelectron spectroscopy. As an indirect method to confirm the presence of organosilane molecules on the ITO substrates, cyclic voltammetry and electrochemical impedance spectroscopy (EIS) were also carried out. Cyclic voltammograms of functionalized ITO electrodes presented lower reduction-oxidation peak currents compared with non-functionalized ITO electrodes. These results demonstrate the presence of the epoxysilane coating on the ITO surface. EIS showed that organosilane-functionalized electrodes present higher polarization resistance, acting as an electronic barrier for the electron transfer between the conductive solution and the ITO electrode. The results of these electrochemical measurements, together with the significant difference in the X-ray spectra between bare ITO and organosilane-functionalized ITO substrates, may point to a new exploitable oxide-based nanostructured material for biosensing applications. As a first step towards sensing, rapid functionalization of such substrates and their application to electrochemical analysis is tested in this work. Interestingly, oxide-based materials are highly integrable with the silicon chip technology, which would permit the easy adaptation of such sensors into lab-on-a-chip configurations, providing benefits such as reduced size and weight to facilitate on-chip integration, and leading to low-cost mass production of microanalysis systems.

scholarly journals Removal of Zn(II) By Magnetic Composite Adsorbent: Synthesis, Performance, And Mechanism

2021 ◽  
Author(s):  
Shuang Yi ◽  
Binqin Bao ◽  
Weifeng Song ◽  
MuDdan Liu
Keyword(s):  
Photoelectron Spectroscopy ◽  
Experimental Results ◽  
Ion Concentration ◽  
Magnetic Composite ◽  
Order Kinetic ◽  
Exchange Effect ◽  
Composite Adsorbent ◽  
Composite Gel ◽  
Infrared Spectrometer ◽  
Pseudo Second Order

Abstract In this study, L-methionine and nano-Fe3O4 were encapsulated and cured on sodium alginate by the ionic cross-linking method to form magnetic composite gel spheres (SML). The influence of adsorbent dosages, pH, reaction time, and initial ion concentration on the ability of the gel spheres to adsorb Zn(II) was investigated. The experimental results indicated that under the optimum conditions, the maximum amount of Zn(II) adsorbed by the adsorbent gel spheres reached 86.84 mgˑg-1. The experimental results of adsorption indicate that the reaction process of this adsorbent fits well with the Langmuir and pseudo-second-order kinetic models and is a heat absorption reaction. The results of the adsorption investigation of the coexistence system showed that the adsorbent would preferentially adsorb Pb(II), and the adsorption efficiency of Zn(II) decreased when the concentration of interfering ions increased. The structure of this adsorbent and the adsorption mechanism were investigated by Fourier transform infrared spectrometer, thermal gravimetric analyzer, vibrating sample magnetometer, scanning electron microscope, Brunner-Emmet-Teller measurements, and X-ray photoelectron spectroscopy. The results show that this magnetic composite adsorbent is a mesoporous material with superior adsorption performance, and the amino and carboxyl groups on it react with Zn(II) via ligand chelation; the ion exchange effect of Ca(II) also plays a role. The desorption-adsorption experiments of the adsorbent indicated that the adsorption amount of Zn(II) was maintained at a higher level after several cycles, and the loss of Fe was approximately 0.2%. In summary, SML is an ideal adsorbent for environmental protection.

Sign in / Sign up

Export Citation Format

Share Document