scholarly journals Real-Time Monitoring of Microalgal Biomass in Pilot-Scale Photobioreactors Using Nephelometry

Processes ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1530
Author(s):  
Eli S. J. Thoré ◽  
Floris Schoeters ◽  
Jornt Spit ◽  
Sabine Van Miert

The increasing cultivation of microalgae in photobioreactors warrants efficient and non-invasive methods to quantify biomass density in real time. Nephelometric turbidity assessment, a method that measures light scatter by particles in suspension, was introduced already several decades ago but was only recently validated as a high-throughput tool to monitor microalgae biomass. The light scatter depends on the density of the suspended particles as well as on their physical properties, but so far there are hardly any accounts on how nephelometric assessment relates to classic methods such as dry weight and spectrophotometric measurement across a broad biomass density range for different microalgae species. Here, we monitored biomass density online and in real time during the semi-continuous cultivation of three commercial microalgae species Chloromonas typhlos, Microchloropsis gaditana and Porphyridium purpureum in pilot-scale photobioreactors, and relate nephelometric turbidity to dry weight and optical density. The results confirm a relatively strong (R2 = 0.87–0.93) and nonlinear relationship between turbidity and biomass density that differs among the three species. Overall, we demonstrate how nephelometry can be used to monitor microalgal biomass in photobioreactors, and provide the necessary means to estimate the biomass density of the studied species from turbidity data to facilitate automated biomass monitoring.

2014 ◽  
Author(s):  
Rozaimi Ghazali ◽  
◽  
Asiah Mohd Pilus ◽  
Wan Mohd Bukhari Wan Daud ◽  
Mohd Juzaila Abd Latif ◽  
...  

2021 ◽  
Vol 8 (4) ◽  
pp. 54
Author(s):  
Daniele Serrani ◽  
Antonella Volta ◽  
Franco Cingolani ◽  
Luca Pennasilico ◽  
Caterina Di Bella ◽  
...  

Real-time elastosonography (RTE) is a recently described, non-invasive, ultrasonographic technique developed to assess tissue elasticity. The main aim of this study was to investigate the ultrasonographic and elastosonographic appearance of the common calcaneal tendon (CCT) in an ovine model, and to monitor the progression of tendon healing after an experimentally-induced tendinopathy. Sound tendons were initially evaluated (T0) with a caliper and by a single operator with ultrasound. Ultrasonographic and elastosonographic images were then acquired. Subsequently, ultrasound-guided tendon lesions were induced by injecting 500 IU of Type IA collagenases proximally to the calcaneal tuberosity. Caliper measurement, ultrasonography and elastosonography were then repeated at 15 (T1), 30 (T2) and 60 (T3) days. Clinically measured width of the tendon, ultrasonographic thickness and width and percentage of hard (Elx-t%hrd) and soft (Elx-t%sft) tissue were recorded. Statistical analysis was performed on the data collected; statistical significance was set at p < 0.05. Intra-class correlation coefficient (ICC) revealed good (0.68) repeatability of elastosonographic evaluation of the CCT. The tendon width was significantly increased when comparing T0 with T1–2 and decreased when comparing T1–2 with T3. Ultrasound-assessed thickness was significantly increased between T0–T1 and decreased between T1-T2–3. Elx-t%hrd was significantly decreased at T1–2–3 and Elx-t%sft was significantly increased at T1–2–3. In conclusion, the ovine CCT is a highly stiff structure that undergoes a severe loss of stiffness during the healing process. Thickness and width of the tendon increased during the first 30 days and then reduced progressively along the subsequent 30 days. Ultrasonographic appearance of the tendon remained severely abnormal and the tendon showed severely reduced elastic proprieties 60 days after lesion induction.


Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1922
Author(s):  
Gwang Su Kim ◽  
Yumin Park ◽  
Joonchul Shin ◽  
Young Geun Song ◽  
Chong-Yun Kang

The breath gas analysis through gas phase chemical analysis draws attention in terms of non-invasive and real time monitoring. The array-type sensors are one of the diagnostic methods with high sensitivity and selectivity towards the target gases. Herein, we presented a 2 × 4 sensor array with a micro-heater and ceramic chip. The device is designed in a small size for portability, including the internal eight-channel sensor array. In2O3 NRs and WO3 NRs manufactured through the E-beam evaporator’s glancing angle method were used as sensing materials. Pt, Pd, and Au metal catalysts were decorated for each channel to enhance functionality. The sensor array was measured for the exhaled gas biomarkers CH3COCH3, NO2, and H2S to confirm the respiratory diagnostic performance. Through this operation, the theoretical detection limit was calculated as 1.48 ppb for CH3COCH3, 1.9 ppt for NO2, and 2.47 ppb for H2S. This excellent detection performance indicates that our sensor array detected the CH3COCH3, NO2, and H2S as biomarkers, applying to the breath gas analysis. Our results showed the high potential of the gas sensor array as a non-invasive diagnostic tool that enables real-time monitoring.


Nanoscale ◽  
2021 ◽  
Author(s):  
Carolina del Real Mata ◽  
Roozbeh Siavash Moakhar ◽  
Sayed Iman Isaac Hosseini ◽  
Mahsa Jalali ◽  
Sara Mahshid

Non-invasive liquid biopsies offer hope for a rapid, risk-free, real-time glimpse into cancer diagnostics. Recently, hydrogen peroxide (H2O2) is identified as a cancer biomarker due to continued release from cancer...


Sign in / Sign up

Export Citation Format

Share Document