scholarly journals The Value of Sentinel-2 Spectral Bands for the Assessment of Winter Wheat Growth and Development

2019 ◽  
Vol 11 (17) ◽  
pp. 2050 ◽  
Author(s):  
Andrew Revill ◽  
Anna Florence ◽  
Alasdair MacArthur ◽  
Stephen Hoad ◽  
Robert Rees ◽  
...  
Keyword(s):  
Winter Wheat ◽  
Chlorophyll Content ◽  
Management Practices ◽  
Near Infrared ◽  
Spectral Characteristics ◽  
Crop Management ◽  
Area Index ◽  
Spectral Bands ◽  
The Mean ◽  
Sentinel 2

Leaf Area Index (LAI) and chlorophyll content are strongly related to plant development and productivity. Spatial and temporal estimates of these variables are essential for efficient and precise crop management. The availability of open-access data from the European Space Agency’s (ESA) Sentinel-2 satellite—delivering global coverage with an average 5-day revisit frequency at a spatial resolution of up to 10 metres—could provide estimates of these variables at unprecedented (i.e., sub-field) resolution. Using synthetic data, past research has demonstrated the potential of Sentinel-2 for estimating crop variables. Nonetheless, research involving a robust analysis of the Sentinel-2 bands for supporting agricultural applications is limited. We evaluated the potential of Sentinel-2 data for retrieving winter wheat LAI, leaf chlorophyll content (LCC) and canopy chlorophyll content (CCC). In coordination with destructive and non-destructive ground measurements, we acquired multispectral data from an Unmanned Aerial Vehicle (UAV)-mounted sensor measuring key Sentinel-2 spectral bands (443 to 865 nm). We applied Gaussian processes regression (GPR) machine learning to determine the most informative Sentinel-2 bands for retrieving each of the variables. We further evaluated the GPR model performance when propagating observation uncertainty. When applying the best-performing GPR models without propagating uncertainty, the retrievals had a high agreement with ground measurements—the mean R2 and normalised root-mean-square error (NRMSE) were 0.89 and 8.8%, respectively. When propagating uncertainty, the mean R2 and NRMSE were 0.82 and 11.9%, respectively. When accounting for measurement uncertainty in the estimation of LAI and CCC, the number of most informative Sentinel-2 bands was reduced from four to only two—the red-edge (705 nm) and near-infrared (865 nm) bands. This research demonstrates the value of the Sentinel-2 spectral characteristics for retrieving critical variables that can support more sustainable crop management practices.

scholarly journals Agro-Economic Evaluation of Alternative Crop Management Options for Teff Production in Midland Agro-Ecology, Ethiopia

Agriculture ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 298
Author(s):  
Fekremariam Asargew Mihretie ◽  
Atsushi Tsunekawa ◽  
Nigussie Haregeweyn ◽  
Enyew Adgo ◽  
Mitsuru Tsubo ◽  
...  
Keyword(s):  
Management Practices ◽  
Smallholder Farmers ◽  
Early Stage ◽  
Crop Management ◽  
Production Costs ◽  
Agronomic Performance ◽  
Labor Costs ◽  
Management Options ◽  
Area Index ◽  
Weed Population

Teff is an important crop for smallholder farmers in Ethiopia. Improved crop management practices are needed to increase teff productivity and decrease production costs. Here, we used a split–split plot design to evaluate the impacts of different tillage, sowing, and soil compaction practices, and their combinations, on agronomic performance, weed population, lodging, and cost in teff production at the Aba Gerima watershed in northwestern Ethiopia in 2018–2020. Reduced tillage (RT) improved soil moisture, resulting in increased agronomic performance and decreased production costs compared with conventional tillage (CT); however, the weed population was substantially larger with RT than with CT. Row planting (RP) reduced seed cost and lodging but increased sowing and weeding costs compared with broadcast planting (BP). Plant population and leaf area index were substantially greater with BP than with RP during early-stage growth, but this reversed during late-stage growth. Despite labor costs being significantly greater with (WC) compaction than without (NC), little to no differences were observed in the weed population or in agronomic performance. Partial cost–benefit analysis revealed that RT–RP–WC followed by RT–RP–NC was the most economical treatment combination, suggesting that RT–RP–NC could be a labor-effective means of increasing teff production by smallholder farms in Ethiopia.

scholarly journals Spaceborne Estimation of Leaf Area Index in Cotton, Tomato, and Wheat Using Sentinel-2

Land ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 505
Author(s):  
Gregoriy Kaplan ◽  
Offer Rozenstein
Keyword(s):  
Water Vapor ◽  
Leaf Area Index ◽  
Leaf Area ◽  
Vegetation Index ◽  
Near Infrared ◽  
Linear Regression Models ◽  
Area Index ◽  
Estimation Performance ◽  
Red Edge ◽  
Sentinel 2

Satellite remote sensing is a useful tool for estimating crop variables, particularly Leaf Area Index (LAI), which plays a pivotal role in monitoring crop development. The goal of this study was to identify the optimal Sentinel-2 bands for LAI estimation and to derive Vegetation Indices (VI) that are well correlated with LAI. Linear regression models between time series of Sentinel-2 imagery and field-measured LAI showed that Sentinel-2 Band-8A—Narrow Near InfraRed (NIR) is more accurate for LAI estimation than the traditionally used Band-8 (NIR). Band-5 (Red edge-1) showed the lowest performance out of all red edge bands in tomato and cotton. A novel finding was that Band 9 (Water vapor) showed a very high correlation with LAI. Bands 1, 2, 3, 4, 5, 11, and 12 were saturated at LAI ≈ 3 in cotton and tomato. Bands 6, 7, 8, 8A, and 9 were not saturated at high LAI values in cotton and tomato. The tomato, cotton, and wheat LAI estimation performance of ReNDVI (R2 = 0.79, 0.98, 0.83, respectively) and two new VIs (WEVI (Water vapor red Edge Vegetation Index) (R2 = 0.81, 0.96, 0.71, respectively) and WNEVI (Water vapor narrow NIR red Edge Vegetation index) (R2 = 0.79, 0.98, 0.79, respectively)) were higher than the LAI estimation performance of the commonly used NDVI (R2 = 0.66, 0.83, 0.05, respectively) and other common VIs tested in this study. Consequently, reNDVI, WEVI, and WNEVI can facilitate more accurate agricultural monitoring than traditional VIs.

Reflectance characteristics of cumulative defoliation of balsam fir

1988 ◽  
Vol 18 (8) ◽  
pp. 1008-1016 ◽  
Author(s):  
D. G. Leckie ◽  
P. M. Teillet ◽  
G. Fedosejevs ◽  
D. P. Ostaff
Keyword(s):  
Near Infrared ◽  
Spectral Characteristics ◽  
Broad Band ◽  
Integrating Sphere ◽  
Simple Relationship ◽  
Spectral Bands ◽  
Infrared Wavelengths ◽  
Remote Sensing Techniques ◽  
Middle Infrared ◽  
Airborne Sensors

Knowledge of the spectral characteristics of trees with varying degrees of needle loss is essential for developing remote sensing techniques for assessing defoliation. Spectra covering the range 400–2400 nm were acquired for single tree crowns suffering varying degrees of cumulative defoliation due to the spruce budworm (Choristoneurafumiferana (Clem.)), using a spectrometer mounted in the bucket of a boom truck. Spectra over the range 360–1100 nm were also obtained for the components of defoliated trees (i.e., needles, bare branches, and lichen), using a separate spectrometer and integrating sphere. Estimates of defoliation symptoms of each tree were made from the ground and above the tree. Changes in reflectance had a close and simple relationship with the defoliation symptoms measured. The spectral differences due to cumulative defoliation that were observed were broad-band features. The best spectral regions for differentiating levels of cumulative defoliation symptoms were the blue, red, shorter near-infrared wavelengths, and middle-infrared. Although currently available satellite and airborne sensors operate in these spectral regions, defoliation assessment may be improved by the use of optimized spectral bands.

scholarly journals Hyperspectral Inversion Model of Chlorophyll Content in Peanut Leaves

2020 ◽  
Vol 10 (7) ◽  
pp. 2259 ◽  
Author(s):  
Haixia Qi ◽  
Bingyu Zhu ◽  
Lingxi Kong ◽  
Weiguang Yang ◽  
Jun Zou ◽  
...  
Keyword(s):  
Chlorophyll Content ◽  
Spectral Index ◽  
Spectral Reflectance ◽  
Near Infrared ◽  
Plant Density ◽  
Cell Structure ◽  
Spectral Bands ◽  
Study Results ◽  
Leaf Spectral Reflectance ◽  
Estimation Models

The purpose of this study is to determine a method for quickly and accurately estimating the chlorophyll content of peanut plants at different plant densities. This was explored using leaf spectral reflectance to monitor peanut chlorophyll content to detect sensitive spectral bands and the optimum spectral indicators to establish a quantitative model. Peanut plants under different plant density conditions were monitored during three consecutive growth periods; single-photon avalanche diode (SPAD) and hyperspectral data derived from the leaves under the different plant density conditions were recorded. By combining arbitrary bands, indices were constructed across the full spectral range (350–2500 nm) based on blade spectra: the normalized difference spectral index (NDSI), ratio spectral index (RSI), difference spectral index (DSI) and soil-adjusted spectral index (SASI). This enabled the best vegetation index reflecting peanut-leaf SPAD values to be screened out by quantifying correlations with chlorophyll content, and the peanut leaf SPAD estimation models established by regression analysis to be compared and analyzed. The results showed that the chlorophyll content of peanut leaves decreased when plant density was either too high or too low, and that it reached its maximum at the appropriate plant density. In addition, differences in the spectral reflectance of peanut leaves under different chlorophyll content levels were highly obvious. Without considering the influence of cell structure as chlorophyll content increased, leaf spectral reflectance in the visible (350–700 nm): near-infrared (700–1300 nm) ranges also increased. The spectral bands sensitive to chlorophyll content were mainly observed in the visible and near-infrared ranges. The study results showed that the best spectral indicators for determining peanut chlorophyll content were NDSI (R520, R528), RSI (R748, R561), DSI (R758, R602) and SASI (R753, R624). Testing of these regression models showed that coefficient of determination values based on the NDSI, RSI, DSI and SASI estimation models were all greater than 0.65, while root mean square error values were all lower than 2.04. Therefore, the regression model established according to the above spectral indicators was a valid predictor of the chlorophyll content of peanut leaves.

scholarly journals A Deep Learning Approach for Burned Area Segmentation with Sentinel-2 Data

2020 ◽  
Vol 12 (15) ◽  
pp. 2422
Author(s):  
Lisa Knopp ◽  
Marc Wieland ◽  
Michaela Rättich ◽  
Sandro Martinis
Keyword(s):  
Deep Learning ◽  
Network Performance ◽  
Near Infrared ◽  
Remote Sensing Data ◽  
Economic Consequences ◽  
Validation Dataset ◽  
Burned Area ◽  
Burned Areas ◽  
Spectral Bands ◽  
Sentinel 2

Wildfires have major ecological, social and economic consequences. Information about the extent of burned areas is essential to assess these consequences and can be derived from remote sensing data. Over the last years, several methods have been developed to segment burned areas with satellite imagery. However, these methods mostly require extensive preprocessing, while deep learning techniques—which have successfully been applied to other segmentation tasks—have yet to be fully explored. In this work, we combine sensor-specific and methodological developments from the past few years and suggest an automatic processing chain, based on deep learning, for burned area segmentation using mono-temporal Sentinel-2 imagery. In particular, we created a new training and validation dataset, which is used to train a convolutional neural network based on a U-Net architecture. We performed several tests on the input data and reached optimal network performance using the spectral bands of the visual, near infrared and shortwave infrared domains. The final segmentation model achieved an overall accuracy of 0.98 and a kappa coefficient of 0.94.

scholarly journals Improving Field-Scale Wheat LAI Retrieval Based on UAV Remote-Sensing Observations and Optimized VI-LUTs

2019 ◽  
Vol 11 (20) ◽  
pp. 2456 ◽  
Author(s):  
Wanxue Zhu ◽  
Zhigang Sun ◽  
Yaohuan Huang ◽  
Jianbin Lai ◽  
Jing Li ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Precision Agriculture ◽  
Vegetation Index ◽  
Management Practices ◽  
Near Infrared ◽  
Lookup Table ◽  
Field Scale ◽  
Area Index ◽  
Biophysical Parameter ◽  
Retrieval Accuracy

Leaf area index (LAI) is a key biophysical parameter for monitoring crop growth status, predicting crop yield, and quantifying crop variability in agronomic applications. Mapping the LAI at the field scale using multispectral cameras onboard unmanned aerial vehicles (UAVs) is a promising precision-agriculture application with specific requirements: The LAI retrieval method should be (1) robust so that crop LAI can be estimated with similar accuracy and (2) easy to use so that it can be applied to the adjustment of field management practices. In this study, three UAV remote-sensing missions (UAVs with Micasense RedEdge-M and Cubert S185 cameras) were carried out over six experimental plots from 2018 to 2019 to investigate the performance of reflectance-based lookup tables (LUTs) and vegetation index (VI)-based LUTs generated from the PROSAIL model for wheat LAI retrieval. The effects of the central wavelengths and bandwidths for the VI calculations on the LAI retrieval were further examined. We found that the VI-LUT strategy was more robust and accurate than the reflectance-LUT strategy. The differences in the LAI retrieval accuracy among the four VI-LUTs were small, although the improved modified chlorophyll absorption ratio index-lookup table (MCARI2-LUT) and normalized difference vegetation index-lookup table (NDVI-LUT) performed slightly better. We also found that both of the central wavelengths and bandwidths of the VIs had effects on the LAI retrieval. The VI-LUTs with optimized central wavelengths (red = 612 nm, near-infrared (NIR) = 756 nm) and narrow bandwidths (~4 nm) improved the wheat LAI retrieval accuracy (R2 ≥ 0.75). The results of this study provide an alternative method for retrieving crop LAI, which is robust and easy use for precision-agriculture applications and may be helpful for designing UAV multispectral cameras for agricultural monitoring.

scholarly journals Influence of Different Satellite Imagery on the Analysis of Riparian Leaf Density in a Mountain Stream

2020 ◽  
Vol 12 (20) ◽  
pp. 3376 ◽  
Author(s):  
Giovanni Romano ◽  
Giovanni Francesco Ricci ◽  
Francesco Gentile
Keyword(s):  
Winter Wheat ◽  
Satellite Imagery ◽  
Vegetation Cover ◽  
Riparian Vegetation ◽  
Deciduous Forests ◽  
Sensor Data ◽  
Mountain Stream ◽  
Landsat 8 ◽  
Area Index ◽  
Sentinel 2

In recent decades, technological advancements in sensors have generated increasing interest in remote sensing data for the study of vegetation features. Image pixel resolution can affect data analysis and results. This study evaluated the potential of three satellite images of differing resolution (Landsat 8, 30 m; Sentinel-2, 10 m; and Pleiades 1A, 2 m) in assessing the Leaf Area Index (LAI) of riparian vegetation in two Mediterranean streams, and in both a winter wheat field and a deciduous forest used to compare the accuracy of the results. In this study, three different retrieval methods—the Caraux-Garson, the Lambert-Beer, and the Campbell and Norman equations—are used to estimate LAI from the Normalized Difference Vegetation Index (NDVI). To validate sensor data, LAI values were measured in the field using the LAI 2200 Plant Canopy Analyzer. The statistical indices showed a better performance for Pleiades 1A and Landsat 8 images, the former particularly in sites characterized by high canopy closure, such as deciduous forests, or in areas with stable riparian vegetation, the latter where stable reaches of riparian vegetation cover are almost absent or very homogenous, as in winter wheat fields. Sentinel-2 images provided more accurate results in terms of the range of LAI values. Considering the different types of satellite imagery, the Lambert-Beer equation generally performed best in estimating LAI from the NDVI, especially in areas that are geomorphologically stable or have a denser vegetation cover, such as deciduous forests.

scholarly journals Simulation and Verification of Vertical Heterogeneity Spectral Response of Winter Wheat Based on the mSCOPE Model

Sensors ◽  
2020 ◽  
Vol 20 (16) ◽  
pp. 4570
Author(s):  
Linsheng Huang ◽  
Yuanyuan Zhang ◽  
Guijun Yang ◽  
Dong Liang ◽  
Heli Li ◽  
...  
Keyword(s):  
Winter Wheat ◽  
Vertical Profile ◽  
Near Infrared ◽  
Spectral Response ◽  
Visible Region ◽  
Operating Efficiency ◽  
Canopy Reflectance ◽  
Near Infrared Reflectance ◽  
Area Index ◽  
Vertical Heterogeneity

Vertical heterogeneity of the biochemical characteristics of crop canopy is important in diagnosing and monitoring nutrition, disease, and crop yield via remote sensing. However, the research on vertical isomerism was not comprehensive. Experiments were carried out from the two levels of simulation and verification to analyze the applicability of this recently development model. Effects of winter wheat on spectrum were studied when input different structure parameters (e.g., leaf area index (LAI)) and physicochemical parameters (e.g., chlorophyll content (Chla+b) and water content (Cw)) to the mSCOPE (Soil Canopy Observation, Photochemistry, and Energy fluxes) model. The maximum operating efficiency was 127.43, when the winter wheat was stratified into three layers. Meanwhile, the simulation results also proved that: the vertical profile of LAI had an influence on canopy reflectance in almost all bands; the vertical profile of Chla+b mainly affected the reflectivity of visible region; the vertical profile of Cw only affected the near-infrared reflectance. The verification results showed that the vegetation indexes (VIs) selected of different bands were strongly correlated with the parameters of the canopy. LAI, Chla+b and Cw affected VIs estimation related to LAI, Chla+b and Cw respectively. The Root Mean Square Error (RMSE) of the new-proposed NDVIgreen was the smallest, which was 0.05. Sensitivity analysis showed that the spectrum was more sensitive to changes in upper layer parameters, which verified the rationality of mSCOPE model in explaining the law that light penetration in vertical nonuniform canopy gradually decreases with the increase of layers.

scholarly journals A Comparison of Hybrid Machine Learning Algorithms for the Retrieval of Wheat Biophysical Variables from Sentinel-2

2019 ◽  
Vol 11 (5) ◽  
pp. 481 ◽  
Author(s):  
Deepak Upreti ◽  
Wenjiang Huang ◽  
Weiping Kong ◽  
Simone Pascucci ◽  
Stefano Pignatti ◽  
...  
Keyword(s):  
Machine Learning ◽  
Least Squares ◽  
Chlorophyll Content ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Area Index ◽  
Random Forest Tree ◽  
Ground Validation ◽  
Study Sites ◽  
Sentinel 2

This study focuses on the comparison of hybrid methods of estimation of biophysical variables such as leaf area index (LAI), leaf chlorophyll content (LCC), fraction of absorbed photosynthetically active radiation (FAPAR), fraction of vegetation cover (FVC), and canopy chlorophyll content (CCC) from Sentinel-2 satellite data. Different machine learning algorithms were trained with simulated spectra generated by the physically-based radiative transfer model PROSAIL and subsequently applied to Sentinel-2 reflectance spectra. The algorithms were assessed against a standard operational approach, i.e., the European Space Agency (ESA) Sentinel Application Platform (SNAP) toolbox, based on neural networks. Since kernel-based algorithms have a heavy computational cost when trained with large datasets, an active learning (AL) strategy was explored to try to alleviate this issue. Validation was carried out using ground data from two study sites: one in Shunyi (China) and the other in Maccarese (Italy). In general, the performance of the algorithms was consistent for the two study sites, though a different level of accuracy was found between the two sites, possibly due to slightly different ground sampling protocols and the range and variability of the values of the biophysical variables in the two ground datasets. For LAI estimation, the best ground validation results were obtained for both sites using least squares linear regression (LSLR) and partial least squares regression, with the best performances values of R2 of 0.78, rott mean squared error (RMSE) of 0.68 m2 m−2 and a relative RMSE (RRMSE) of 19.48% obtained in the Maccarese site with LSLR. The best results for LCC were obtained using Random Forest Tree Bagger (RFTB) and Bagging Trees (BagT) with the best performances obtained in Maccarese using RFTB (R2 = 0.26, RMSE = 8.88 μg cm−2, RRMSE = 17.43%). Gaussian Process Regression (GPR) was the best algorithm for all variables only in the cross-validation phase, but not in the ground validation, where it ranked as the best only for FVC in Maccarese (R2 = 0.90, RMSE = 0.08, RRMSE = 9.86%). It was found that the AL strategy was more efficient than the random selection of samples for training the GPR algorithm.

Sign in / Sign up

Export Citation Format

Share Document