scholarly journals Review of Collision Avoidance and Path Planning Methods for Ships Utilizing Radar Remote Sensing

2021 ◽  
Vol 13 (16) ◽  
pp. 3265 ◽  
Author(s):  
Agnieszka Lazarowska

The paper presents a comparative analysis of recent collision avoidance and real-time path planning algorithms for ships. Compared methods utilize radar remote sensing for target ships detection. Different recently introduced approaches are briefly described and compared. An emphasis is put on input data reception using a radar as a remote sensing device applied in order to detect moving obstacles such as encountered ships. The most promising methods are highlighted and their advantages and limitations are discussed. Concluding remarks include proposals of further research directions in the development of collision avoidance methods utilizing radar remote sensing.

2021 ◽  
Vol 9 (4) ◽  
pp. 405
Author(s):  
Raphael Zaccone

While collisions and groundings still represent the most important source of accidents involving ships, autonomous vessels are a central topic in current research. When dealing with autonomous ships, collision avoidance and compliance with COLREG regulations are major vital points. However, most state-of-the-art literature focuses on offline path optimisation while neglecting many crucial aspects of dealing with real-time applications on vessels. In the framework of the proposed motion-planning, navigation and control architecture, this paper mainly focused on optimal path planning for marine vessels in the perspective of real-time applications. An RRT*-based optimal path-planning algorithm was proposed, and collision avoidance, compliance with COLREG regulations, path feasibility and optimality were discussed in detail. The proposed approach was then implemented and integrated with a guidance and control system. Tests on a high-fidelity simulation platform were carried out to assess the potential benefits brought to autonomous navigation. The tests featured real-time simulation, restricted and open-water navigation and dynamic scenarios with both moving and fixed obstacles.


Author(s):  
Tasher Ali Sheikh ◽  
Swacheta Dutta ◽  
Smriti Baruah ◽  
Pooja Sharma ◽  
Sahadev Roy

The concept of path planning and collision avoidance are two of the most common theories applied for designing and developing in advanced autonomous robotics applications. NI LabView makes it possible to implement real-time processor for obstacle avoidance. The obstacle avoidance strategy ensures that the robot whenever senses the obstacle stops without being collided and moves freely when path is free, but sometimes there exists a probability that once the path is found free and the robot starts moving, then within a fraction of milliseconds, the robot again sense the obstacle and it stops. This continuous swing of stop and run within a very small period of time may cause heavy burden on the system leading to malfunctioning of the components of the system. This paper deals with overcoming this drawback in a way that even after the robot calculates the path is free then also it will wait for a specific amount of time before running it. So as to confirm that if again the sensor detects the obstacle within that specified period then robot don’t need to transit its state suddenly thus avoiding continuous transition of run and stop. Thus it reduces the heavy burden on the system.


Author(s):  
Rouhollah Jafari ◽  
Shuqing Zeng ◽  
Nikolai Moshchuk

In this paper, a collision avoidance system is proposed to steer away from a leading target vehicle and other surrounding obstacles. A virtual target lane is generated based on an object map resulted from perception module. The virtual target lane is used by a path planning algorithm for an evasive steering maneuver. A geometric method which is computationally fast for real-time implementations is employed. The algorithm is tested in real-time and the simulation results suggest the effectiveness of the system in avoiding collision with not only the leading target vehicle but also other surrounding obstacles.


2018 ◽  
Vol 06 (04) ◽  
pp. 231-250 ◽  
Author(s):  
Willson Amalraj Arokiasami ◽  
Prahlad Vadakkepat ◽  
Kay Chen Tan ◽  
Dipti Srinivasan

Autonomous unmanned vehicles are preferable in patrolling, surveillance and, search and rescue missions. Multi-agent architectures are commonly used for autonomous control of unmanned vehicles. Existing multi-robot architectures for unmanned aerial and ground robots are generally mission and platform oriented. Collision avoidance, path-planning and tracking are some of the fundamental requirements for autonomous operation of unmanned robots. Though aerial and ground vehicles operate differently, the algorithms for obstacle avoidance, path-planning and path-tracking can be generalized. Service Oriented Interoperable Framework for Robot Autonomy (SOIFRA) proposed in this work is an interoperable multi-agent framework focused on generalizing platform independent algorithms for unmanned aerial and ground vehicles. SOIFRA is behavior-based, modular and interoperable across unmanned aerial and ground vehicles. SOIFRA provides collision avoidance, and, path-planning and tracking behaviors for unmanned aerial and ground vehicles. Vector Directed Path-Generation and Tracking (VDPGT), a vector-based algorithm for real-time path-generation and tracking, is proposed in this work. VDPGT dynamically adopts the shortest path to the destination while minimizing the tracking error. Collision avoidance is performed utilizing Hough transform, Canny contour, Lucas–Kanade sparse optical flow algorithm and expansion of object-based time-to-contact estimation. Simulation and experimental results from Turtlebot and AR Drone show that VDPGT can dynamically generate and track paths, and SOIFRA is interoperable across multiple robotic platforms.


2009 ◽  
Vol 62 (3) ◽  
pp. 455-476 ◽  
Author(s):  
CheeKuang Tam ◽  
Richard Bucknall ◽  
Alistair Greig

Efficient marine navigation through obstructions is still one of the many problems faced by the mariner. Many accidents can be traced to human error, recently increased traffic densities and the average cruise speed of ships impedes the collision avoidance decision making process further in the sense that decisions have to be made in reduced time. It seems logical that the decision making process be computerised and automated as a step forward to reduce the risk of collision. This article reviews the development of collision avoidance techniques and path planning for ships, particularly when engaged in close range encounters. In addition, previously published works have been categorised and their shortcomings highlighted in order to identify the ‘state of the art’ and issues in close range marine navigation.


Sign in / Sign up

Export Citation Format

Share Document