scholarly journals An Approach to Dynamic Sensing Data Fusion

Sensors ◽  
2019 ◽  
Vol 19 (17) ◽  
pp. 3668 ◽  
Author(s):  
Yunfei Yin ◽  
Liufa Guan ◽  
Chengen Zheng
Keyword(s):  
Data Acquisition ◽  
Transmission Efficiency ◽  
Sensor Data ◽  
Acquisition Time ◽  
Time Interval ◽  
Fusion Model ◽  
Time Dynamic ◽  
Sensing Data ◽  
Proposed Model ◽  
Dynamic Data Acquisition

For the research and development of sensor systems, the collection and fusion of sensing data is the core. In order to make sensor data acquisition change with the change in environment, a dynamic data acquisition and fusion method based on feedback control is proposed in this paper. According to the sensing data acquisition and fusion model, the optimal acquisition of sensor data is achieved through real-time dynamic judgment of the collected data, decision-making of the next acquisition time interval, and adjustment. This model enables the sensor system to adapt to different environments. An experimental study of the proposed model was carried out on an experimental platform, and the results show that the proposed model can not only reflect the change in sensing data but also improve the transmission efficiency.

An Area-Imaging Proportional Counter for X-Ray Diffraction

1980 ◽  
Vol 24 ◽  
pp. 161-166 ◽  
Author(s):  
C. Richard Desper ◽  
Ronald Burns
Keyword(s):  
Data Acquisition ◽  
Proportional Counter ◽  
Orientation Angle ◽  
Polymeric Materials ◽  
Bragg Angle ◽  
Acquisition Time ◽  
Time Interval ◽  
X Ray Diffraction ◽  
Oriented Polymers ◽  
X Ray

Slow data acquisition rates have, in the past, limited the use of X-ray diffraction for characterization of polymeric materials. Photon counting techniques yield quantitative data in digital form for computer analysis. However, a great deal of data acquisition time is required when data is taken sequentially; i.e., when each intensity determination (at a particular goniometer setting) requires a separate time interval, during which intensity at other angle values is ignored. The problem is particularly acute for oriented polymers since two or more diffraction angles are involved: The Bragg angle along with at least one orientation angle. For this reason, an area-imaging (two-dimensional) proportional counter has been developed for use with a four-circle X-ray diffraction system. Although basically a single-crystal unit, this goniometer has been used in this laboratory and others for studies of oriented polymers. The receiving pinhole collimator and aperture have been removed, and the area-imaging counter has been mounted on the detector arm track. The original receiving aperture is still used for alignment, and the area detector Is positioned with its center at the receiving aperture center position.

scholarly journals Mapping Succession in Non-Forest Habitats by Means of Remote Sensing: Is the Data Acquisition Time Critical for Species Discrimination?

2019 ◽  
Vol 11 (22) ◽  
pp. 2629 ◽  
Author(s):  
Katarzyna Osińska-Skotak ◽  
Aleksandra Radecka ◽  
Hubert Piórkowski ◽  
Dorota Michalska-Hejduk ◽  
Dominik Kopeć ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Data Acquisition ◽  
Remote Sensing Data ◽  
Natura 2000 ◽  
Recursive Feature Elimination ◽  
Acquisition Time ◽  
Species Discrimination ◽  
Natural Habitats ◽  
Sensing Data ◽  
Data Acquisition Time

The process of secondary succession is one of the most significant threats to non-forest (natural and semi-natural open) Natura 2000 habitats in Poland; shrub and tree encroachment taking place on abandoned, low productive agricultural areas, historically used as pastures or meadows, leads to changes to the composition of species and biodiversity loss, and results in landscape transformations. There is a perceived need to create a methodology for the monitoring of vegetation succession by airborne remote sensing, both from quantitative (area, volume) and qualitative (plant species) perspectives. This is likely to become a very important issue for the effective protection of natural and semi-natural habitats and to advance conservation planning. A key variable to be established when implementing a qualitative approach is the remote sensing data acquisition date, which determines the developmental stage of trees and shrubs forming the succession process. It is essential to choose the optimal date on which the spectral and geometrical characteristics of the species are as different from each other as possible. As part of the research presented here, we compare classifications based on remote sensing data acquired during three different parts of the growing season (spring, summer and autumn) for five study areas. The remote sensing data used include high-resolution hyperspectral imagery and LiDAR (Light Detection and Ranging) data acquired simultaneously from a common aerial platform. Classifications are done using the random forest algorithm, and the set of features to be classified is determined by a recursive feature elimination procedure. The results show that the time of remote sensing data acquisition influences the possibility of differentiating succession species. This was demonstrated by significant differences in the spatial extent of species, which ranged from 33.2% to 56.2% when comparing pairs of maps, and differences in classification accuracies, which when expressed in values of Cohen’s Kappa reached ~0.2. For most of the analysed species, the spring and autumn dates turned out to be slightly more favourable than the summer one. However, the final recommendation for the data acquisition time should take into consideration the phenological cycle of deciduous species present within the research area and the abiotic conditions.

Human Activity Recognition using Fourier Transform Inspired Deep Learning Combination Model

2019 ◽  
Vol 9 (1) ◽  
pp. 16-31
Author(s):  
Kyungkoo Jun
Keyword(s):  
Fourier Transform ◽  
Deep Learning ◽  
Short Term Memory ◽  
Window Size ◽  
Sensor Data ◽  
Data Sets ◽  
Data Set ◽  
Proposed Model ◽  
Testing Data ◽  
Labeling Scheme

Background & Objective: This paper proposes a Fourier transform inspired method to classify human activities from time series sensor data. Methods: Our method begins by decomposing 1D input signal into 2D patterns, which is motivated by the Fourier conversion. The decomposition is helped by Long Short-Term Memory (LSTM) which captures the temporal dependency from the signal and then produces encoded sequences. The sequences, once arranged into the 2D array, can represent the fingerprints of the signals. The benefit of such transformation is that we can exploit the recent advances of the deep learning models for the image classification such as Convolutional Neural Network (CNN). Results: The proposed model, as a result, is the combination of LSTM and CNN. We evaluate the model over two data sets. For the first data set, which is more standardized than the other, our model outperforms previous works or at least equal. In the case of the second data set, we devise the schemes to generate training and testing data by changing the parameters of the window size, the sliding size, and the labeling scheme. Conclusion: The evaluation results show that the accuracy is over 95% for some cases. We also analyze the effect of the parameters on the performance.

scholarly journals Neural Network Approach for Global Solar Irradiance Prediction at Extremely Short-Time-Intervals Using Particle Swarm Optimization Algorithm

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1213
Author(s):  
Ahmed Aljanad ◽  
Nadia M. L. Tan ◽  
Vassilios G. Agelidis ◽  
Hussain Shareef
Keyword(s):  
Neural Networks ◽  
Particle Swarm Optimization ◽  
Solar Irradiance ◽  
Particle Swarm ◽  
Time Interval ◽  
Time Intervals ◽  
Swarm Optimization ◽  
Backpropagation Neural Networks ◽  
Proposed Model ◽  
Short Time

Hourly global solar irradiance (GSR) data are required for sizing, planning, and modeling of solar photovoltaic farms. However, operating and controlling such farms exposed to varying environmental conditions, such as fast passing clouds, necessitates GSR data to be available for very short time intervals. Classical backpropagation neural networks do not perform satisfactorily when predicting parameters within short intervals. This paper proposes a hybrid backpropagation neural networks based on particle swarm optimization. The particle swarm algorithm is used as an optimization algorithm within the backpropagation neural networks to optimize the number of hidden layers and neurons used and its learning rate. The proposed model can be used as a reliable model in predicting changes in the solar irradiance during short time interval in tropical regions such as Malaysia and other regions. Actual global solar irradiance data of 5-s and 1-min intervals, recorded by weather stations, are applied to train and test the proposed algorithm. Moreover, to ensure the adaptability and robustness of the proposed technique, two different cases are evaluated using 1-day and 3-days profiles, for two different time intervals of 1-min and 5-s each. A set of statistical error indices have been introduced to evaluate the performance of the proposed algorithm. From the results obtained, the 3-days profile’s performance evaluation of the BPNN-PSO are 1.7078 of RMSE, 0.7537 of MAE, 0.0292 of MSE, and 31.4348 of MAPE (%), at 5-s time interval, where the obtained results of 1-min interval are 0.6566 of RMSE, 0.2754 of MAE, 0.0043 of MSE, and 1.4732 of MAPE (%). The results revealed that proposed model outperformed the standalone backpropagation neural networks method in predicting global solar irradiance values for extremely short-time intervals. In addition to that, the proposed model exhibited high level of predictability compared to other existing models.

scholarly journals A Novel Deep Learning Approach for Machinery Prognostics Based on Time Windows

2019 ◽  
Vol 9 (22) ◽  
pp. 4813 ◽  
Author(s):  
Hanbo Yang ◽  
Fei Zhao ◽  
Gedong Jiang ◽  
Zheng Sun ◽  
Xuesong Mei
Keyword(s):  
Time Windows ◽  
Remaining Useful Life ◽  
Sensor Data ◽  
Time Interval ◽  
Kernel Module ◽  
Initial Stage ◽  
Research Task ◽  
Consecutive Time ◽  
Useful Life

Remaining useful life (RUL) prediction is a challenging research task in prognostics and receives extensive attention from academia to industry. This paper proposes a novel deep convolutional neural network (CNN) for RUL prediction. Unlike health indicator-based methods which require the long-term tracking of sensor data from the initial stage, the proposed network aims to utilize data from consecutive time samples at any time interval for RUL prediction. Additionally, a new kernel module for prognostics is designed where the kernels are selected automatically, which can further enhance the feature extraction ability of the network. The effectiveness of the proposed network is validated using the C-MAPSS dataset for aircraft engines provided by NASA. Compared with the state-of-the-art results on the same dataset, the prediction results demonstrate the superiority of the proposed network.

Estimation of Time-Dependent Turning Fractions at Signalized Intersections

1998 ◽  
Vol 1644 (1) ◽  
pp. 142-149 ◽  
Author(s):  
Gang-Len Chang ◽  
Xianding Tao
Keyword(s):  
Signalized Intersections ◽  
Efficient Estimation ◽  
Estimation Accuracy ◽  
Time Interval ◽  
Short Time Interval ◽  
Simulation Experiments ◽  
Proposed Model ◽  
Short Time ◽  
Estimation Of Time ◽  
Additional Constraints

An effective method for estimating time-varying turning fractions at signalized intersections is described. With the inclusion of approximate intersection delay, the proposed model can account for the impacts of signal setting on the dynamic distribution of intersection flows. To improve the estimation accuracy, the use of preestimated turning fractions from a relatively longer time interval has been proposed to serve as additional constraints for the same estimation but over a short time interval. The results of extensive simulation experiments indicated that the proposed method can yield sufficiently accurate as well as efficient estimation of dynamic turning fractions for signalized intersections.

Routine Clustering of Mobile Sensor Data Facilitates Psychotic Relapse Prediction in Schizophrenia Patients (Preprint)

2021 ◽  
Author(s):  
Joanne Zhou ◽  
Bishal Lamichhane ◽  
Dror Ben-Zeev ◽  
Andrew Campbell ◽  
Akane Sano
Keyword(s):  
Prediction Models ◽  
Gaussian Mixture ◽  
Mobile Sensing ◽  
Cluster Models ◽  
Sensor Data ◽  
Sensing Data ◽  
Model Based ◽  
Clustering Model ◽  
Relapse Prediction ◽  
Lower Variability

BACKGROUND Behavioral representations obtained from mobile sensing data could be helpful for the prediction of an oncoming psychotic relapse in schizophrenia patients and delivery of timely interventions to mitigate such relapse. OBJECTIVE In this work, we aim to develop clustering models to obtain behavioral representations from continuous multimodal mobile sensing data towards relapse prediction tasks. The identified clusters could represent different routine behavioral trends related to daily living of patients as well as atypical behavioral trends associated with impending relapse. METHODS We used the mobile sensing data obtained in the CrossCheck project for our analysis. Continuous data from six different mobile sensing-based modalities (e.g. ambient light, sound/conversation, acceleration etc.) obtained from a total of 63 schizophrenia patients, each monitored for up to a year, were used for the clustering models and relapse prediction evaluation. Two clustering models, Gaussian Mixture Model (GMM) and Partition Around Medoids (PAM), were used to obtain behavioral representations from the mobile sensing data. These models have different notions of similarity between behaviors as represented by the mobile sensing data and thus provide differing behavioral characterizations. The features obtained from the clustering models were used to train and evaluate a personalized relapse prediction model using Balanced Random Forest. The personalization was done by identifying optimal features for a given patient based on a personalization subset consisting of other patients who are of similar age. RESULTS The clusters identified using the GMM and PAM models were found to represent different behavioral patterns (such as clusters representing sedentary days, active but with low communications days, etc.). While GMM based models better characterized routine behaviors by discovering dense clusters with low cluster spread, some other identified clusters had a larger cluster spread likely indicating heterogeneous behavioral characterizations. PAM model based clusters on the other hand had lower variability of cluster spread, indicating more homogeneous behavioral characterization in the obtained clusters. Significant changes near the relapse periods were seen in the obtained behavioral representation features from the clustering models. The clustering model based features, together with other features characterizing the mobile sensing data, resulted in an F2 score of 0.24 for the relapse prediction task in a leave-one-patient-out evaluation setting. This obtained F2 score is significantly higher than a random classification baseline with an average F2 score of 0.042. CONCLUSIONS Mobile sensing can capture behavioral trends using different sensing modalities. Clustering of the daily mobile sensing data may help discover routine as well as atypical behavioral trends. In this work, we used GMM and PAM-based cluster models to obtain behavioral trends in schizophrenia patients. The features derived from the cluster models were found to be predictive for detecting an oncoming psychotic relapse. Such relapse prediction models can be helpful to enable timely interventions.

scholarly journals GPU-Based Lossless Compression of Aurora Spectral Data using Online DPCM

2019 ◽  
Vol 11 (14) ◽  
pp. 1635 ◽  
Author(s):  
Jiaojiao Li ◽  
Jiaji Wu ◽  
Gwanggil Jeon
Keyword(s):  
Spectral Data ◽  
Matrix Multiplication ◽  
Lossless Compression ◽  
Differential Pulse ◽  
Acquisition Time ◽  
Time Interval ◽  
Processing Unit ◽  
Pulse Code Modulation ◽  
Differential Pulse Code Modulation ◽  
Redundant Data

It is well known that aurorae have very high research value, but the data volume of aurora spectral data is very large, which brings great challenges to storage and transmission. To alleviate this problem, compression of aurora spectral data is indispensable. This paper presents a parallel Compute Unified Device Architecture (CUDA) implementation of the prediction-based online Differential Pulse Code Modulation (DPCM) method for the lossless compression of the aurora spectral data. Two improvements are proposed to improve the compression performance of the online DPCM method. One is on the computing of the prediction coefficients, and the other is on the encoding of the residual. In the CUDA implementation, we proposed a decomposition method for the matrix multiplication to avoid redundant data accesses and calculations. In addition, the CUDA implementation is optimized with a multi-stream technique and multi-graphics processing unit (GPU) technique, respectively. Finally, the average compression time of an aurora spectral image reaches about 0.06 s, which is much less than the 15 s aurora spectral data acquisition time interval and can save a lot of time for transmission and other subsequent tasks.

Sign in / Sign up

Export Citation Format

Share Document