scholarly journals Flexible Pressure Sensors with a Wide Detection Range Based on Self-Assembled Polystyrene Microspheres

Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5194
Author(s):  
Wufan Chen ◽  
Bingwei Wang ◽  
Qianbing Zhu ◽  
Xin Yan
Keyword(s):  
Pressure Sensor ◽  
Pressure Sensors ◽  
Wearable Devices ◽  
Large Area ◽  
Polystyrene Microsphere ◽  
Detection Range ◽  
Electronic Skin ◽  
Self Assembled ◽  
Flexible Pressure Sensors ◽  
Wide Pressure

Flexible pressure sensors are important components of electronic skin and flexible wearable devices. Most existing piezoresistive flexible pressure sensors have obtained high sensitivities, however, they have relatively small pressure detection ranges. Here, we report flexible pressure sensors with a wide detection range using polydimethylsiloxane (PDMS) as the substrate, carbon nanotube films as the electrode material, and self-assembled polystyrene microsphere film as the microstructure layer. The obtained pressure sensor had a sandwich structure, and had a wide pressure detection range (from 4 kPa to 270 kPa), a sensitivity of 2.49 kPa−1, and a response time of tens of milliseconds. Two hundred load–unload cycles indicated that the device had good stability. In addition, the sensor was obtained by large-area fabrication with a low power consumption. This pressure sensor is expected to be widely used in applications such as electronic skin and flexible wearable devices.

scholarly journals Flexible and Transparent Pressure Sensor Based on CNTs Film Microstructure

2021 ◽  
Author(s):  
Liangliang Liu ◽  
Xin Yan
Keyword(s):  
Pressure Sensor ◽  
Production Cost ◽  
Composite Electrode ◽  
Pressure Sensors ◽  
Wearable Devices ◽  
Capacitive Pressure Sensor ◽  
Detection Range ◽  
Electronic Skin ◽  
Film Microstructure ◽  
Flexible Pressure Sensors

Abstract In recent years, capacitive flexible pressure sensors have been widely studied in electronic skin and wearable devices. The traditional capacitive pressure sensor has a higher production cost due to micro-nano machining technology such as lithography. This paper presents a flexible transparent capacitive pressure sensor based on a PDMS/CNT composite electrode, simple, transparent, flexible, and arrays without lithography. The sensitivity of the device has been tested to 0.0018 kpa -1 with a detection range of 0-30 kPa. The sensor is capable of rapidly detecting different pressures and remains stable after 100 load-unload tests.

Flexible pressure sensing film based on ultra-sensitive SWCNT/PDMS spheres for monitoring human pulse signals

2015 ◽  
Vol 3 (27) ◽  
pp. 5436-5441 ◽  
Author(s):  
Yan-Long Tai ◽  
Zhen-Guo Yang
Keyword(s):  
Pressure Sensors ◽  
Pressure Sensing ◽  
Prosthetic Limbs ◽  
Electronic Skin ◽  
Essential Components ◽  
Biomedical Diagnostics ◽  
Healthcare Monitoring ◽  
Flexible Pressure Sensors ◽  
Human Healthcare

Flexible pressure sensors are essential components of an electronic skin for future attractive applications ranging from human healthcare monitoring to biomedical diagnostics to robotic skins to prosthetic limbs.

Design and Simulation of Pressure Sensor for Ocean Depth Measurements

2013 ◽  
Vol 313-314 ◽  
pp. 666-670 ◽  
Author(s):  
K.J. Suja ◽  
Bhanu Pratap Chaudhary ◽  
Rama Komaragiri
Keyword(s):  
Pressure Sensor ◽  
Integrated Circuit ◽  
Output Voltage ◽  
Pressure Sensors ◽  
Micro Electro Mechanical System ◽  
Constant Thickness ◽  
Piezoresistive Pressure Sensor ◽  
Wide Pressure Range ◽  
Processing Techniques ◽  
Wide Pressure

MEMS (Micro Electro Mechanical System) are usually defined as highly miniaturized devices combining both electrical and mechanical components that are fabricated using integrated circuit batch processing techniques. Pressure sensors are usually manufactured using square or circular diaphragms of constant thickness in the order of few microns. In this work, a comparison between circular diaphragm and square diaphragm indicates that square diaphragm has better perspectives. A new method for designing diaphragm of the Piezoresistive pressure sensor for linearity over a wide pressure range (approximately double) is designed, simulated and compared with existing single diaphragm design with respect to diaphragm deflection and sensor output voltage.

scholarly journals A Highly Sensitive and Flexible Capacitive Pressure Sensor Based on a Porous Three-Dimensional PDMS/Microsphere Composite

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1412 ◽  
Author(s):  
Young Jung ◽  
Wookjin Lee ◽  
Kyungkuk Jung ◽  
Byunggeon Park ◽  
Jinhyoung Park ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Sacrificial Layer ◽  
Three Dimensional ◽  
Pressure Sensors ◽  
Capacitive Pressure Sensor ◽  
Mechanical Stimuli ◽  
Highly Sensitive ◽  
Flexible Pressure Sensors ◽  
Fast Rise ◽  
Better Than

In recent times, polymer-based flexible pressure sensors have been attracting a lot of attention because of their various applications. A highly sensitive and flexible sensor is suggested, capable of being attached to the human body, based on a three-dimensional dielectric elastomeric structure of polydimethylsiloxane (PDMS) and microsphere composite. This sensor has maximal porosity due to macropores created by sacrificial layer grains and micropores generated by microspheres pre-mixed with PDMS, allowing it to operate at a wider pressure range (~150 kPa) while maintaining a sensitivity (of 0.124 kPa−1 in a range of 0~15 kPa) better than in previous studies. The maximized pores can cause deformation in the structure, allowing for the detection of small changes in pressure. In addition to exhibiting a fast rise time (~167 ms) and fall time (~117 ms), as well as excellent reproducibility, the fabricated pressure sensor exhibits reliability in its response to repeated mechanical stimuli (2.5 kPa, 1000 cycles). As an application, we develop a wearable device for monitoring repeated tiny motions, such as the pulse on the human neck and swallowing at the Adam’s apple. This sensory device is also used to detect movements in the index finger and to monitor an insole system in real-time.

Flexible hemispheric microarrays of highly pressure-sensitive sensors based on breath figure method

Nanoscale ◽  
2018 ◽  
Vol 10 (22) ◽  
pp. 10691-10698 ◽  
Author(s):  
Zhihui Wang ◽  
Ling Zhang ◽  
Jin Liu ◽  
Hao Jiang ◽  
Chunzhong Li
Keyword(s):  
Pressure Sensor ◽  
Pressure Sensors ◽  
Pressure Sensing ◽  
Sensing Range ◽  
Pressure Sensitive ◽  
Breath Figure ◽  
Breath Figure Method ◽  
Flexible Pressure Sensors

Flexible pressure sensors with interlocked hemispheric microstructures are prepared by a novel breath figure strategy. The subtle microstructure remarkably improves the sensitivity and pressure sensing range of the pressure sensor.

scholarly journals Locally Controlled Sensing Properties of Stretchable Pressure Sensors Enabled by Micro-Patterned Piezoresistive Device Architecture

Sensors ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 6588
Author(s):  
Jun Ho Lee ◽  
Jae Sang Heo ◽  
Keon Woo Lee ◽  
Jae Cheol Shin ◽  
Jeong-Wan Jo ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Silver Nanowires ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Fast Response ◽  
Large Area ◽  
Site Specific ◽  
Sensing Properties ◽  
Sensing Range ◽  
Wide Range

For wearable health monitoring systems and soft robotics, stretchable/flexible pressure sensors have continuously drawn attention owing to a wide range of potential applications such as the detection of human physiological and activity signals, and electronic skin (e-skin). Here, we demonstrated a highly stretchable pressure sensor using silver nanowires (AgNWs) and photo-patternable polyurethane acrylate (PUA). In particular, the characteristics of the pressure sensors could be moderately controlled through a micro-patterned hole structure in the PUA spacer and size-designs of the patterned hole area. With the structural-tuning strategies, adequate control of the site-specific sensitivity in the range of 47~83 kPa−1 and in the sensing range from 0.1 to 20 kPa was achieved. Moreover, stacked AgNW/PUA/AgNW (APA) structural designed pressure sensors with mixed hole sizes of 10/200 µm and spacer thickness of 800 µm exhibited high sensitivity (~171.5 kPa−1) in the pressure sensing range of 0~20 kPa, fast response (100~110 ms), and high stretchability (40%). From the results, we envision that the effective structural-tuning strategy capable of controlling the sensing properties of the APA pressure sensor would be employed in a large-area stretchable pressure sensor system, which needs site-specific sensing properties, providing monolithic implementation by simply arranging appropriate micro-patterned hole architectures.

scholarly journals High-Sensitivity Flexible Pressure Sensor-Based 3D CNTs Sponge for Human–Computer Interaction

Polymers ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 3465
Author(s):  
Jianli Cui ◽  
Xueli Nan ◽  
Guirong Shao ◽  
Huixia Sun
Keyword(s):  
Pressure Sensor ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Pressure Sensors ◽  
Chemical Vapor ◽  
High Sensitivity ◽  
Wearable Electronics ◽  
Wide Range ◽  
Flexible Pressure Sensors

Researchers are showing an increasing interest in high-performance flexible pressure sensors owing to their potential uses in wearable electronics, bionic skin, and human–machine interactions, etc. However, the vast majority of these flexible pressure sensors require extensive nano-architectural design, which both complicates their manufacturing and is time-consuming. Thus, a low-cost technology which can be applied on a large scale is highly desirable for the manufacture of flexible pressure-sensitive materials that have a high sensitivity over a wide range of pressures. This work is based on the use of a three-dimensional elastic porous carbon nanotubes (CNTs) sponge as the conductive layer to fabricate a novel flexible piezoresistive sensor. The synthesis of a CNTs sponge was achieved by chemical vapor deposition, the basic underlying principle governing the sensing behavior of the CNTs sponge-based pressure sensor and was illustrated by employing in situ scanning electron microscopy. The CNTs sponge-based sensor has a quick response time of ~105 ms, a high sensitivity extending across a broad pressure range (less than 10 kPa for 809 kPa−1) and possesses an outstanding permanence over 4,000 cycles. Furthermore, a 16-pixel wireless sensor system was designed and a series of applications have been demonstrated. Its potential applications in the visualizing pressure distribution and an example of human–machine communication were also demonstrated.

A multiscale flexible pressure sensor based on nanovesicle-like hollow microspheres for micro-vibration detection in non-contact mode

Nanoscale ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 5737-5745 ◽  
Author(s):  
Tie Li ◽  
Lili Li ◽  
Yuanyuan Bai ◽  
Yudong Cao ◽  
Qifeng Lu ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Pressure Sensors ◽  
Hollow Microspheres ◽  
Contact Mode ◽  
Vibration Signals ◽  
Vibration Detection ◽  
Flexible Pressure Sensor ◽  
Micro Vibration ◽  
Flexible Pressure Sensors

Hierarchical nanovesicle-like hollow microspheres are employed to fabricate flexible pressure sensors for detecting micro-vibration signals in non-contacting mode.

Flexible Capacitive Pressure Sensors for Wearable Electronics

2022 ◽  
Author(s):  
Haizhen Wang ◽  
Zhen Li ◽  
Zeyi Liu ◽  
Tianyou Shan ◽  
Jikun Fu ◽  
...  
Keyword(s):  
Health Monitoring ◽  
Pressure Sensors ◽  
Wearable Electronics ◽  
Electronic Skin ◽  
Flexible Pressure Sensors

Flexible pressure sensors have attracted more and more attention recently due to their broad applications, such as electronic skin and wearable electronics for health monitoring. Among them, capacitive flexible pressure...

Solvent-free fabrication of multi-walled carbon nanotube based flexible pressure sensors for ultra-sensitive touch pad and electronic skin applications

RSC Advances ◽  
2016 ◽  
Vol 6 (98) ◽  
pp. 95836-95845 ◽  
Author(s):  
Parikshit Sahatiya ◽  
Sushmee Badhulika
Keyword(s):  
Carbon Nanotube ◽  
User Interface ◽  
Electronic Devices ◽  
Pressure Sensors ◽  
Solvent Free ◽  
Electronic Skin ◽  
Multi Walled Carbon Nanotube ◽  
Mechanical Pressing ◽  
Flexible Pressure Sensors

Schematic of the MWCNTs based ultrasensitive touch pad by novel rolling pin and pre-compaction mechanical pressing and its applicability as a user interface in modern electronic devices.

Sign in / Sign up

Export Citation Format

Share Document