scholarly journals Mine MIMO Depth Receiver: An Intelligent Receiving Model Based on Densely Connected Convolutional Networks

Sensors ◽  
2021 ◽  
Vol 21 (24) ◽  
pp. 8326
Author(s):  
Mingbo Wang ◽  
Anyi Wang ◽  
Zhaoyang Liu ◽  
Heng Zhang ◽  
Jing Chai
Keyword(s):  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Convolutional Networks ◽  
Modulation Codes ◽  
Mimo Receivers ◽  
Input Multiple Output ◽  
Error Accumulation ◽  
Binary Classifiers ◽  
Receiver Model ◽  
Original Information

Multiple-input multiple-output (MIMO) systems suffer from high BER in the mining environment. In this paper, the mine MIMO depth receiver model is proposed. The model uses densely connected convolutional networks for feature extraction and constructs multiple binary classifiers to recover the original information. Compared with conventional MIMO receivers, the model has no error accumulation caused by processes such as decoding and demodulation. The experimental results show that the model has better performance than conventional decoding methods under different modulation codes and variations in the number of transmitting terminals. Furthermore, we demonstrate that the model can still achieve effective decoding and recover the original information with some data loss at the receiver.

scholarly journals Low-complexity sparse-aware multiuser detection for large-scale MIMO systems

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Rong Ran ◽  
Hayoung Oh
Keyword(s):  
Large Scale ◽  
Mimo Systems ◽  
Minimum Mean Square Error ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Finite Alphabet ◽  
Multiuser Detectors ◽  
Input Multiple Output ◽  
Error Detector ◽  
Significant Performance

AbstractSparse-aware (SA) detectors have attracted a lot attention due to its significant performance and low-complexity, in particular for large-scale multiple-input multiple-output (MIMO) systems. Similar to the conventional multiuser detectors, the nonlinear or compressive sensing based SA detectors provide the better performance but are not appropriate for the overdetermined multiuser MIMO systems in sense of power and time consumption. The linear SA detector provides a more elegant tradeoff between performance and complexity compared to the nonlinear ones. However, the major limitation of the linear SA detector is that, as the zero-forcing or minimum mean square error detector, it was derived by relaxing the finite-alphabet constraints, and therefore its performance is still sub-optimal. In this paper, we propose a novel SA detector, named single-dimensional search-based SA (SDSB-SA) detector, for overdetermined uplink MIMO systems. The proposed SDSB-SA detector adheres to the finite-alphabet constraints so that it outperforms the conventional linear SA detector, in particular, in high SNR regime. Meanwhile, the proposed detector follows a single-dimensional search manner, so it has a very low computational complexity which is feasible for light-ware Internet of Thing devices for ultra-reliable low-latency communication. Numerical results show that the the proposed SDSB-SA detector provides a relatively better tradeoff between the performance and complexity compared with several existing detectors.

PROBLEM STATEMENT OF JOINT ANTENNA SELECTION AND PRECODING IN MASSIVE MIMO COMMUNICATION SYSTEMS

2021 ◽  
Author(s):  
В.Б. КРЕЙНДЕЛИН ◽  
М.В. ГОЛУБЕВ
Keyword(s):  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Antenna Selection ◽  
Multiple Input Multiple Output ◽  
Research Areas ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Legal Restrictions ◽  
Multiple Transmission

Совместный с прекодингом автовыбор антенн на приемной и передающей стороне - одно из перспективных направлений исследований для реализации технологий Multiple Transmission and Reception Points (Multi-TRP, множество точек передачи и приема) в системах со многими передающими и приемными антеннами Massive MIMO (Multiple-Input-Multiple-Output), которые активно развиваются в стандарте 5G. Проанализированы законодательные ограничения, влияющие на применимость технологий Massive MIMO, и специфика реализации разрабатываемого алгоритма в миллиметровомдиапа -зоне длин волн. Рассмотрены алгоритмы формирования матриц автовыбора антенн как на передающей, так и на приемной стороне. Сформулирована строгая математическая постановка задачи для двух критериев работы алгоритма: максимизация взаимной информации и минимизация среднеквадратичной ошибки. Joint precoding and antenna selection both on transmitter and receiver sides is one of the promising research areas for evolving toward the Multiple Transmission and Reception Points (Multi-TRP) concept in Massive MIMO systems. This technology is under active development in the coming 5G 3GPP releases. We analyze legal restrictions for the implementation of 5G Massive MIMO technologies in Russia and the specifics of the implementation of the developed algorithm in the millimeter wavelength range. Algorithms of antenna auto-selection matrices formation on both transmitting and receiving sides are considered. Two criteria are used for joint antenna selection and precoding: maximizing mutual information and minimizing mean square error.

scholarly journals MIMO Self-Encoded Spread Spectrum with Iterative Detection over Rayleigh Fading Channels

2010 ◽  
Vol 2010 ◽  
pp. 1-9 ◽  
Author(s):  
Shichuan Ma ◽  
Lim Nguyen ◽  
Won Mee Jang ◽  
Yaoqing (Lamar) Yang
Keyword(s):  
Fading Channels ◽  
Spread Spectrum ◽  
Rayleigh Fading ◽  
Mimo Systems ◽  
Signal To Noise Ratio ◽  
Multiple Input Multiple Output ◽  
Spatial Diversity ◽  
Iterative Detection ◽  
Channel Fading ◽  
Input Multiple Output

Self-encoded spread spectrum (SESS) is a novel communication technique that derives its spreading code from the randomness of the source stream rather than using conventional pseudorandom noise (PN) code. In this paper, we propose to incorporate SESS in multiple-input multiple-output (MIMO) systems as a means to combat against fading effects in wireless channels. Orthogonal space-time block-coded MIMO technique is employed to achieve spatial diversity, and the inherent temporal diversity in SESS modulation is exploited with iterative detection. Simulation results demonstrate that MIMO-SESS can effectively mitigate the channel fading effect such that the system can achieve a bit error rate of with very low signal-to-noise ratio, from 3.3 dB for a antenna configuration to just less than 0 dB for a configuration under Rayleigh fading. The performance improvement for the case is as much as 6.7 dB when compared to an MIMO PN-coded spread spectrum system.

scholarly journals Location-Aided Uplink Transmission for User-Centric Cell-Free Massive MIMO Systems: A Fairness Priority Perspective

2022 ◽  
Author(s):  
Chen Wei ◽  
Kui Xu ◽  
Zhexian Shen ◽  
Xiaochen Xia ◽  
Wei Xie ◽  
...  
Keyword(s):  
Large Scale ◽  
Mean Squared Error ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Access Point ◽  
Estimation Accuracy ◽  
Minimum Mean Squared Error ◽  
Input Multiple Output ◽  
User Centric ◽  
Assignment Scheme

Abstract In this paper, we investigate the uplink transmission for user-centric cell-free massive multiple-input multiple-output (MIMO) systems. The largest-large-scale-fading-based access point (AP) selection method is adopted to achieve a user-centric operation. Under this user-centric framework, we propose a novel inter-cluster interference-based (IC-IB) pilot assignment scheme to alleviate pilot contamination. Considering the local characteristics of channel estimates and statistics, we propose a location-aided distributed uplink combining scheme based on a novel proposed metric representing inter-user interference to balance the relationship among the spectral efficiency (SE), user equipment (UE) fairness and complexity, in which the normalized local partial minimum mean-squared error (LP-MMSE) combining is adopted for some APs, while the normalized maximum ratio (MR) combining is adopted for the remaining APs. A new closed-form SE expression using the normalized MR combining is derived and a novel metric to indicate the UE fairness is also proposed. Moreover, the max-min fairness (MMF) power control algorithm is utilized to further ensure uniformly good service to the UEs. Simulation results demonstrate that the channel estimation accuracy of our proposed IC-IB pilot assignment scheme outperforms that of the conventional pilot assignment schemes. Furthermore, although the proposed location-aided uplink combining scheme is not always the best in terms of the per-UE SE, it can provide the more fairness among UEs and can achieve a good trade-off between the average SE and computational complexity.

scholarly journals The Downlink Performance for Cell-Free Massive MIMO with Instantaneous CSI in Slowly Time-Varying Channels

Entropy ◽  
2021 ◽  
Vol 23 (11) ◽  
pp. 1552
Author(s):  
Tongzhou Han ◽  
Danfeng Zhao
Keyword(s):  
Power Control ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Time Varying ◽  
Input Multiple Output ◽  
Efficiency Performance ◽  
A Cell ◽  
Time Varying Channel

In centralized massive multiple-input multiple-output (MIMO) systems, the channel hardening phenomenon can occur, in which the channel behaves as almost fully deterministic as the number of antennas increases. Nevertheless, in a cell-free massive MIMO system, the channel is less deterministic. In this paper, we propose using instantaneous channel state information (CSI) instead of statistical CSI to obtain the power control coefficient in cell-free massive MIMO. Access points (APs) and user equipment (UE) have sufficient time to obtain instantaneous CSI in a slowly time-varying channel environment. We derive the achievable downlink rate under instantaneous CSI for frequency division duplex (FDD) cell-free massive MIMO systems and apply the results to the power control coefficients. For FDD systems, quantized channel coefficients are proposed to reduce feedback overhead. The simulation results show that the spectral efficiency performance when using instantaneous CSI is approximately three times higher than that achieved using statistical CSI.

scholarly journals Beam division multiple access for millimeter wave massive MIMO: Hybrid zero-forcing beamforming with user selection

2022 ◽  
Vol 12 (1) ◽  
pp. 445
Author(s):  
Hong Son Vu ◽  
Kien Truong ◽  
Minh Thuy Le
Keyword(s):  
Multiple Access ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Zero Forcing ◽  
Multiuser Interference ◽  
Novel Approach ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Promising Solution

<p>Massive multiple-input multiple-output (MIMO) systems are considered a promising solution to minimize multiuser interference (MUI) based on simple precoding techniques with a massive antenna array at a base station (BS). This paper presents a novel approach of beam division multiple access (BDMA) which BS transmit signals to multiusers at the same time via different beams based on hybrid beamforming and user-beam schedule. With the selection of users whose steering vectors are orthogonal to each other, interference between users is significantly improved. While, the efficiency spectrum of proposed scheme reaches to the performance of fully digital solutions, the multiuser interference is considerably reduced.</p>

Quantum algorithm for MUSIC-based DOA estimation in hybrid MIMO systems

2021 ◽  
Author(s):  
Fan-Xu Meng ◽  
Ze-Tong Li ◽  
Xutao Yu ◽  
Zaichen Zhang
Keyword(s):  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Quantum Algorithm ◽  
Doa Estimation ◽  
Quantum Circuit ◽  
Music Algorithm ◽  
Quantum Method ◽  
Sample Covariance ◽  
Input Multiple Output ◽  
Eigen Decomposition

Abstract The multiple signal classification (MUSIC) algorithm is a well-established method to evaluate the direction of arrival (DOA) of signals. However, the construction and eigen-decomposition of the sample covariance matrix (SCM) are computationally costly for MUSIC in hybrid multiple input multiple output (MIMO) systems, which limits the application and advancement of the algorithm. In this paper, we present a novel quantum method for MUSIC in hybrid MIMO systems. Our scheme makes the following three contributions. First, the quantum subroutine for constructing the approximate SCM is designed, along with the quantum circuit for the steering vector and a proposal for quantum singular vector transformation. Second, the variational density matrix eigensolver is proposed to determine the signal and noise subspaces utilizing the destructive swap test. As a proof of principle, we conduct two numerical experiments using a quantum simulator. Finally, the quantum labelling procedure is explored to determine the DOA. The proposed quantum method can potentially achieve exponential speedup on certain parameters and polynomial speedup on others under specific moderate circumstances, compared with their classical counterparts.

Precoding for Multiuser MIMO

2012 ◽  
pp. 130-156 ◽  
Author(s):  
Elsadig Saeid ◽  
Varun Jeoti ◽  
Brahim Belhaouari Samir
Keyword(s):  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Achievable Rate ◽  
Multiple Access Channels ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Single User ◽  
A New Technique ◽  
Improved Technique

Future Wireless Networks are expected to adopt multi-user multiple input multiple output (MU-MIMO) systems whose performance is maximized by making use of precoding at the transmitter. This chapter describes the recent advances in precoding design for MU-MIMO and introduces a new technique to improve the precoder performance. Without claiming to be comprehensive, the chapter gives deep introduction on basic MIMO techniques covering the basics of single user multiple input multiple output (SU-MIMO) links, its capacity, various transmission strategies, SU-MIMO link precoding, and MIMO receiver structures. After the introduction, MU-MIMO system model is defined and maximum achievable rate regions for both MU-MIMO broadcast and MU-MIMO multiple access channels are explained. It is followed by critical literature review on linear precoding design for MU-MIMO broadcast channel. This paves the way for introducing an improved technique of precoding design that is followed by its performance evaluation.

Sign in / Sign up

Export Citation Format

Share Document