scholarly journals Cost Effective Synthesis of Graphene Nanomaterials for Non-Enzymatic Electrochemical Sensors for Glucose: A Comprehensive Review

Sensors ◽  
2022 ◽  
Vol 22 (1) ◽  
pp. 355
Author(s):  
Georgia Balkourani ◽  
Theodoros Damartzis ◽  
Angeliki Brouzgou ◽  
Panagiotis Tsiakaras
Keyword(s):  
Detection Limit ◽  
Surface Area ◽  
Metallic Nanoparticles ◽  
Electrochemical Sensors ◽  
Direct Electron Transfer ◽  
Specific Area ◽  
Cost Effective ◽  
Internal Resistance ◽  
Electrochemical Sensing ◽  
Synthesis Methods

The high conductivity of graphene material (or its derivatives) and its very large surface area enhance the direct electron transfer, improving non-enzymatic electrochemical sensors sensitivity and its other characteristics. The offered large pores facilitate analyte transport enabling glucose detection even at very low concentration values. In the current review paper we classified the enzymeless graphene-based glucose electrocatalysts’ synthesis methods that have been followed into the last few years into four main categories: (i) direct growth of graphene (or oxides) on metallic substrates, (ii) in-situ growth of metallic nanoparticles into graphene (or oxides) matrix, (iii) laser-induced graphene electrodes and (iv) polymer functionalized graphene (or oxides) electrodes. The increment of the specific surface area and the high degree reduction of the electrode internal resistance were recognized as their common targets. Analyzing glucose electrooxidation mechanism over Cu- Co- and Ni-(oxide)/graphene (or derivative) electrocatalysts, we deduced that glucose electrochemical sensing properties, such as sensitivity, detection limit and linear detection limit, totally depend on the route of the mass and charge transport between metal(II)/metal(III); and so both (specific area and internal resistance) should have the optimum values.

scholarly journals Application of biosynthesized metal nanoparticles in electrochemical sensors

2021 ◽  
pp. 77-77
Author(s):  
Totka Dodevska ◽  
Dobrin Hadzhiev ◽  
Ivan Shterev ◽  
Yanna Lazarova
Keyword(s):  
Green Synthesis ◽  
Metal Nanoparticles ◽  
Electrochemical Sensors ◽  
Dynamic Range ◽  
Limit Of Detection ◽  
Cost Effective ◽  
Electrochemical Sensing ◽  
Synthesis Methods ◽  
Range Limit ◽  
Wide Range

Recently, the development of eco-friendly, cost-effective and reliable methods for synthesis of metal nanoparticles has drawn a considerable attention. The so-called green synthesis, using mild reaction conditions and natural resources as plant extracts and microorganisms, has established as a convenient, sustainable, cheap and environmentally safe approach for synthesis of a wide range of nanomaterials. Over the past decade, biosynthesis is regarded as an important tool for reducing the harmful effects of traditional nanoparticle synthesis methods commonly used in laboratories and industry. This review emphasizes the significance of biosynthesized metal nanoparticles in the field of electrochemical sensing. There is increasing evidence that green synthesis of nanoparticles provides a new direction in designing of cost-effective, highly sensitive and selective electrode-catalysts applicable in food, clinical and environmental analysis. The article is based on 157 references and provided a detailed overview on the main approaches for green synthesis of metal nanoparticles and their applications in designing of electrochemical sensor devices. Important operational characteristics including sensitivity, dynamic range, limit of detection, as well as data on stability and reproducibility of sensors have also been covered. Keywords: biosynthesis; green synthesis; nanomaterials; nanotechnology; modified electrodes

scholarly journals Utilising Commercially Fabricated Printed Circuit Boards as an Electrochemical Biosensing Platform

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 793
Author(s):  
Uroš Zupančič ◽  
Joshua Rainbow ◽  
Pedro Estrela ◽  
Despina Moschou
Keyword(s):  
Printed Circuit Boards ◽  
Electrochemical Sensors ◽  
Cost Effective ◽  
Electrochemical Sensing ◽  
Label Free ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Sensing Applications ◽  
Electrochemical Biosensing ◽  
Pre Treatment

Printed circuit boards (PCBs) offer a promising platform for the development of electronics-assisted biomedical diagnostic sensors and microsystems. The long-standing industrial basis offers distinctive advantages for cost-effective, reproducible, and easily integrated sample-in-answer-out diagnostic microsystems. Nonetheless, the commercial techniques used in the fabrication of PCBs produce various contaminants potentially degrading severely their stability and repeatability in electrochemical sensing applications. Herein, we analyse for the first time such critical technological considerations, allowing the exploitation of commercial PCB platforms as reliable electrochemical sensing platforms. The presented electrochemical and physical characterisation data reveal clear evidence of both organic and inorganic sensing electrode surface contaminants, which can be removed using various pre-cleaning techniques. We demonstrate that, following such pre-treatment rules, PCB-based electrodes can be reliably fabricated for sensitive electrochemical biosensors. Herein, we demonstrate the applicability of the methodology both for labelled protein (procalcitonin) and label-free nucleic acid (E. coli-specific DNA) biomarker quantification, with observed limits of detection (LoD) of 2 pM and 110 pM, respectively. The proposed optimisation of surface pre-treatment is critical in the development of robust and sensitive PCB-based electrochemical sensors for both clinical and environmental diagnostics and monitoring applications.

scholarly journals Graphene Quantum Dots-Based Nanocomposites Applied in Electrochemical Sensors: A Recent Survey

Electrochem ◽  
2021 ◽  
Vol 2 (3) ◽  
pp. 490-519
Author(s):  
Murilo H. M. Facure ◽  
Rodrigo Schneider ◽  
Jessica B. S. Lima ◽  
Luiza A. Mercante ◽  
Daniel S. Correa
Keyword(s):  
Quantum Dots ◽  
Molecularly Imprinted Polymers ◽  
Electrochemical Sensors ◽  
Graphene Quantum Dots ◽  
Electrochemical Sensing ◽  
Synthesis Methods ◽  
Current Trends ◽  
Sensing Platforms ◽  
Metal Organic ◽  
2D Nanomaterials

Graphene quantum dots (GQDs) have been widely investigated in recent years due to their outstanding physicochemical properties. Their remarkable characteristics allied to their capability of being easily synthesized and combined with other materials have allowed their use as electrochemical sensing platforms. In this work, we survey recent applications of GQDs-based nanocomposites in electrochemical sensors and biosensors. Firstly, the main characteristics and synthesis methods of GQDs are addressed. Next, the strategies generally used to obtain the GQDs nanocomposites are discussed. Emphasis is given on the applications of GQDs combined with distinct 0D, 1D, 2D nanomaterials, metal-organic frameworks (MOFs), molecularly imprinted polymers (MIPs), ionic liquids, as well as other types of materials, in varied electrochemical sensors and biosensors for detecting analytes of environmental, medical, and agricultural interest. We also discuss the current trends and challenges towards real applications of GQDs in electrochemical sensors.

scholarly journals Electrochemical Sensing for Examining Vitamin D3 based on MIP using NOVA 1.7 and Autolab PGSTAT 302N

2020 ◽  
Author(s):  
Saveri Singh ◽  
Naresh Batra ◽  
MA Ansari ◽  
Shabana Urooj
Keyword(s):  
Electrochemical Sensor ◽  
Vitamin D3 ◽  
Electrochemical Sensors ◽  
Electrochemical Techniques ◽  
Reference Electrode ◽  
Cost Effective ◽  
Great Sensitivity ◽  
Electrochemical Sensing ◽  
Carbon Electrode ◽  
Sudden Increase

Introduction: An electrochemical sensor has the ability to transform the associated data containing electrochemical reactions into a reliable representative signal. The electrochemical sensors can be classified into potentiometric, conductometric, and ampere-metric or Volta-metric. Although, there are various electrochemical techniques for the detection of Vitamin D3, there is still a need for a simplified and cost-effective method. An electrochemical sensor provides great sensitivity towards the detection of the analyte. Aim: To fabricate an electrochemical sensor for the detection of Vitamin D3. The sensor used Molecular Imprinted Polymer (MIP) based Screen Printed Carbon Electrode (SPCE). Materials and Methods: The SPCE used was a three-electrode system consisting of silver working electrode, silver reference electrode and a counter carbon electrode. The reagents used in the experiment was p-Phenylenediamine, resorcinol and Vitamin D3 that were applied in a particular amount onto the SPCE. The process of electropolymerisation was carried out in order to form a non-conductive layer. Cavities were gradually formed on the surface of SPCE. A mediator was used to obtain reliable results for the detection of Vitamin D3. It is evident from the existing literature that the number of scans of electropolymerisation holds a significant role in this process. The procedure was applied for the formation of non-imprinted electrode in the absence of the analyte. Results: The presence of the template i.e., Vitamin D3 was recorded using the developed electrochemical sensor. The current decreased on rebinding of Vitamin D3 which resulted in the change of redox peak of ferricyanide. This signified the sudden increase in concentration of Vitamin D3 specifying its presence. Conclusion: The results obtained specifies the great sensitivity of the electrochemical sensor towards the template i.e., vitamin D3. The clinical relevance of such electrochemical sensors is that they produce simple, accurate and reproducible results which can be used to optimise the care of patients.

A review of the advanced developments of electrochemical sensors for the detection of toxic and bioactive molecules

2019 ◽  
Vol 6 (12) ◽  
pp. 3418-3439 ◽  
Author(s):  
Rasu Ramachandran ◽  
Tse-Wei Chen ◽  
Shen-Ming Chen ◽  
Thangaraj Baskar ◽  
Ramanjam Kannan ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Heavy Metal Ions ◽  
Electrochemical Sensors ◽  
Cost Effective ◽  
Nitro Compounds ◽  
Review Article ◽  
Electrochemical Sensing ◽  
Bioactive Molecules ◽  
The Novel ◽  
Recent Developments

The recent developments made regarding the novel, cost-effective, and environmentally friendly nanocatalysts for the electrochemical sensing of biomolecules, pesticides, nitro compounds and heavy metal ions are discussed in this review article.

scholarly journals Mo-Based Layered Nanostructures for the Electrochemical Sensing of Biomolecules

Sensors ◽  
2020 ◽  
Vol 20 (18) ◽  
pp. 5404
Author(s):  
Rayhane Zribi ◽  
Giovanni Neri
Keyword(s):  
Electrochemical Properties ◽  
Electrode Materials ◽  
Electrochemical Sensors ◽  
Electrochemical Sensing ◽  
Layered Compounds ◽  
Current Status ◽  
Synthesis Methods ◽  
Sensing Applications ◽  
Layered Nanostructures ◽  
2D Nanomaterials

Mo-based layered nanostructures are two-dimensional (2D) nanomaterials with outstanding characteristics and very promising electrochemical properties. These materials comprise nanosheets of molybdenum (Mo) oxides (MoO2 and MoO3), dichalcogenides (MoS2, MoSe2, MoTe2), and carbides (MoC2), which find application in electrochemical devices for energy storage and generation. In this feature paper, we present the most relevant characteristics of such Mo-based layered compounds and their use as electrode materials in electrochemical sensors. In particular, the aspects related to synthesis methods, structural and electronic characteristics, and the relevant electrochemical properties, together with applications in the specific field of electrochemical biomolecule sensing, are reviewed. The main features, along with the current status, trends, and potentialities for biomedical sensing applications, are described, highlighting the peculiar properties of Mo-based 2D-nanomaterials in this field.

scholarly journals Green Synthesis of Metallic Nanoparticles: Applications and Limitations

Catalysts ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 902
Author(s):  
Pritam Kumar Dikshit ◽  
Jatin Kumar ◽  
Amit K. Das ◽  
Soumi Sadhu ◽  
Sunita Sharma ◽  
...  
Keyword(s):  
Green Synthesis ◽  
Metallic Nanoparticles ◽  
Environmental Science ◽  
Cost Effective ◽  
Operating Conditions ◽  
Synthesis Methods ◽  
Comprehensive Overview ◽  
Factors Affecting ◽  
Wide Range ◽  
Range Of Functions

The past decade has witnessed a phenomenal rise in nanotechnology research due to its broad range of applications in diverse fields including food safety, transportation, sustainable energy, environmental science, catalysis, and medicine. The distinctive properties of nanomaterials (nano-sized particles in the range of 1 to 100 nm) make them uniquely suitable for such wide range of functions. The nanoparticles when manufactured using green synthesis methods are especially desirable being devoid of harsh operating conditions (high temperature and pressure), hazardous chemicals, or addition of external stabilizing or capping agents. Numerous plants and microorganisms are being experimented upon for an eco–friendly, cost–effective, and biologically safe process optimization. This review provides a comprehensive overview on the green synthesis of metallic NPs using plants and microorganisms, factors affecting the synthesis, and characterization of synthesized NPs. The potential applications of metal NPs in various sectors have also been highlighted along with the major challenges involved with respect to toxicity and translational research.

scholarly journals Green and Cost-Effective Synthesis of Metallic Nanoparticles by Algae: Safe Methods for Translational Medicine

2020 ◽  
Vol 7 (4) ◽  
pp. 129
Author(s):  
Bushra Uzair ◽  
Ayesha Liaqat ◽  
Haroon Iqbal ◽  
Bouzid Menaa ◽  
Anam Razzaq ◽  
...  
Keyword(s):  
Metallic Nanoparticles ◽  
Molecular Mechanisms ◽  
Cost Effective ◽  
Trisodium Citrate ◽  
Synthesis Methods ◽  
Metallic Ions ◽  
Size And Shape ◽  
Potential Applications ◽  
Spr Effect ◽  
Physical And Chemical

Metal nanoparticles (NPs) have received much attention for potential applications in medicine (mainly in oncology, radiology and infectiology), due to their intriguing chemical, electronical, catalytical, and optical properties such as surface plasmon resonance (SPR) effect. They also offer ease in controlled synthesis and surface modification (e.g., tailored properties conferred by capping/protecting agents including N-, P-, COOH-, SH-containing molecules and polymers such as thiol, disulfide, ammonium, amine, and multidentate carboxylate), which allows (i) tuning their size and shape (e.g., star-shaped and/or branched) (ii) improving their stability, monodispersity, chemical miscibility, and activity, (iii) avoiding their aggregation and oxidation over time, (iv) increasing their yield and purity. The bottom-up approach, where the metal ions are reduced in the NPs grown in the presence of capping ligands, has been widely used compared to the top-down approach. Besides the physical and chemical synthesis methods, the biological method is gaining much consideration. Indeed, several drawbacks have been reported for the synthesis of NPs via physical (e.g., irradiation, ultrasonication) and chemical (e.g., electrochemisty, reduction by chemicals such as trisodium citrate or ascorbic acid) methods (e.g., cost, and/ortoxicity due to use of hazardous solvents, low production rate, use of huge amount of energy). However, (organic or inorganic) eco-friendly NPs synthesis exhibits a sustainable, safe, and economical solution. Thereby, a relatively new trend for fast and valuable NPs synthesis from (live or dead) algae (i.e., microalgae, macroalgae and cyanobacteria) has been observed, especially because of its massive presence on the Earth’s crust and their unique properties (e.g., capacity to accumulate and reduce metallic ions, fast propagation). This article discusses the algal-mediated synthesis methods (either intracellularly or extracellularly) of inorganic NPs with special emphasis on the noblest metals, i.e., silver (Ag)- and gold (Au)-derived NPs. The key factors (e.g., pH, temperature, reaction time) that affect their biosynthesis process, stability, size, and shape are highlighted. Eventually, underlying molecular mechanisms, nanotoxicity and examples of major biomedical applications of these algal-derived NPs are presented.

A Review of Reducing Agents in Chemical and Natural Synthesis of Metallic Nanoparticles

2020 ◽  
Vol 10 ◽  
Author(s):  
PB Vandana ◽  
Mangesh Pradeep Kulkarni ◽  
Sagar Tanwar ◽  
Poluri Sesha Sai Kiran ◽  
Gurmandeep Kaur ◽  
...  
Keyword(s):  
Metal Ions ◽  
Metallic Nanoparticles ◽  
Cost Effective ◽  
Natural Antioxidants ◽  
Reducing Agents ◽  
Synthesis Methods ◽  
Methods Of Synthesis ◽  
Synthetic Agents ◽  
Special Mention ◽  
Reducing Properties

: Metal nanoparticular synthesis techniques essentially involve a reduction of metal ions to convert them into nanoparticles. Reducing agents originate from natural and synthetic sources. Chemical methods involve application of synthetic agents that are not healthy and eco-friendly and thus, there is a need for green methods. Green synthesis methods involve reduction of metal ions using plant-based extracts or phytoconstituents and microorganisms like bacteria, yeast, and fungi. These methods have been found to be cost-effective, more efficient and eliminate the application of hazardous chemicals. The phytoconstituents involved in the synthesis of metal nanoparticles are rich in polyols and antioxidants, which in addition to reducing properties, also offer stabilization of formed nanoparticles. Moreover, the size of nanoparticles can also be controlled based on the mechanism of reducing agent involved therein. The present review is an attempt to highlight the methods of synthesis of metallic nanoparticles with a special mention of applications of various natural antioxidants in their synthesis.

scholarly journals Carbon Nanotube-Based Electrochemical Sensors: Principles  and  Applications  in  Biomedical  Systems

2009 ◽  
Vol 2009 ◽  
pp. 1-40 ◽  
Author(s):  
Chengguo Hu ◽  
Shengshui Hu
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Electrochemical Sensors ◽  
Direct Electron Transfer ◽  
Chemical Properties ◽  
Electrochemical Sensing ◽  
Sensing Applications ◽  
Biomedical Systems ◽  
Good Biocompatibility ◽  
And Chemical Properties

Carbon nanotubes (CNTs) have received considerable attention in the field of electrochemical sensing, due to their unique structural, electronic and chemical properties, for instance, unique tubular nanostructure, large specific surface, excellent conductivity, modifiable sidewall, high conductivity, good biocompatibility, and so on. Here, we tried to give a comprehensive review on some important aspects of the applications of CNT-based electrochemical sensors in biomedical systems, including the electrochemical nature of CNTs, the methods for dispersing CNTs in solution, the approaches to the immobilization of functional CNT sensing films on electrodes, and the extensive biomedical applications of the CNT-based electrochemical sensors. In the last section, we mainly focused on the applications of CNT-based electrochemical sensors in the analysis of various biological substances and drugs, the methods for constructing enzyme-based electrochemical biosensors and the direct electron transfer of redox proteins on CNTs. Because several crucial factors (e.g., the surface properties of carbon nanotubes, the methods for constructing carbon nanotube electrodes and the manners for electrochemical sensing applications) predominated the analytical performances of carbon nanotube electrodes, a systematical comprehension of the related knowledge was essential to the acquaintance, mastery and development of carbon nanotube-based electrochemical sensors.

Sign in / Sign up

Export Citation Format

Share Document