scholarly journals Effects of Multiple Supplementary Cementitious Materials on Workability and Segregation Resistance of Lightweight Aggregate Concrete

2018 ◽  
Vol 10 (11) ◽  
pp. 4304 ◽  
Author(s):  
Afonso Solak ◽  
Antonio Tenza-Abril ◽  
José Saval ◽  
Victoria García-Vera
Keyword(s):  
Lightweight Aggregate ◽  
Posidonia Oceanica ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Mineral Admixtures ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
Beneficial Effects ◽  
Binder Ratio ◽  
Different Grain Size

In view of the global sustainable development, it is imperative that supplementary cementing materials (SCM) be used for replacing cement in the concrete industry and several researchers have shown that mineral admixtures can enhance the workability of lightweight aggregate concrete (LWAC) mixture and its strength. In view of the beneficial effects of using SCM in LWAC, this article aims to verify the possible influence of the use of different types of SCM in the segregation phenomenon of LWAC. Three different SCM were studied: Silica Fume (SF), Fly Ash (FA) and Posidonia oceanica Ash (PA). For each SCM, three mixtures were prepared, considering three different percentage substitutions of cement. An image analysis technique was applied to estimate the segregation in each sample. The results show that a substitution of cement by other materials with different grain size, considering a constant water binder ratio, may also result in a variation of the consistency of concrete and the viscosity of the mortar matrix, which may contribute to increase or reduce segregation.

scholarly journals Evaluation of Heat Insulation and Surface Resistivity of Mineral Lightweight Aggregate Concrete(MLAC)

2020 ◽  
Vol 10 (21) ◽  
pp. 7871
Author(s):  
Jung-Nan Chang ◽  
Tung-Tsan Chen ◽  
Chang-Chi Hung ◽  
Her-Yung Wang
Keyword(s):  
Heat Insulation ◽  
Lightweight Aggregate ◽  
Mineral Admixture ◽  
Mineral Admixtures ◽  
Unit Weight ◽  
Lightweight Aggregate Concrete ◽  
Control Group ◽  
K Value ◽  
Aggregate Concrete ◽  
Binder Ratio

In this study, the fixed water/binder ratio is 0.40, four mineral admixtures: fly ash (FA), blast furnace slag (BFS), desulphurization slag (DLS), and glass LED powder (GLP), were added to lightweight aggregate concrete (LWAC), replacing 10% or 30% of the cement content, to study their heat insulation efficiency and engineering performance and to compare the economic impact of mineral admixtures on LWAC. In terms of heat insulation, the thermal conductivity (K value) of the controlled sample was 0.484 kcal/(m.h. °C) and the addition of mineral admixtures changed the concrete unit weight and water absorption ratio, thus reducing the K value by 0.41% to 25.71% and improving the heat insulation. As the mineral admixture hydration products and chemical contents differed, the heat insulation of the LWAC varied as well. The study indicated that the heat insulation is the greatest in concrete with the addition of 30% FA, followed by concrete with the addition of 10% GLP. The addition of mineral admixtures is 30%, the resistivity is 72–455% of the control group, and the resistivity of FA and GLP is higher than the control group. The study is indicated that the proper addition of mineral powder material has an apparent effect on increasing heat insulation efficiency.

Experiment Study on Mechanical Performance of Shale Lightweight Aggregate Concrete

2012 ◽  
Vol 530 ◽  
pp. 80-84 ◽  
Author(s):  
Lin Li ◽  
Qing Wang ◽  
Yu Wang ◽  
Zhao Yang Ding
Keyword(s):  
High Performance ◽  
Large Scale ◽  
Mechanical Performance ◽  
Lightweight Aggregate ◽  
High Strength ◽  
Mineral Admixtures ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
Volume Stability ◽  
Binder Ratio

High performance lightweight aggregate concrete is a kind of lightweight environment-protected building material with high strength, good workability, volume stability and durability, which is widely used in large scale engineering and some important engineering. In this paper water-binder ratio, fly ash content, pre-wetting time, sand ratio were tested to explore the comprehensive strength of lightweight aggregate concrete(LWAC). SEM was used to observe the microstructure characteristics of the specimens. The results showed that LWAC produced in the experiment present good performance, whose apparent density was 1760 Kg/m3～1930Kg/m3, 28d compressive strength was 55MPa～60MPa. Reasonable amounts of sand ratio(38%) and mineral admixtures(10%) were exited and the self-strength of lightweight aggregate played an important role in the preparation of LWAC. In the meanwhile, lightweight aggregates which were pre-wetted effectively increased the later strength.

Permeability of Lightweight Aggregate Concrete with Mineral Admixture

2013 ◽  
Vol 857 ◽  
pp. 105-109
Author(s):  
Xiu Hua Zheng ◽  
Shu Jie Song ◽  
Yong Quan Zhang
Keyword(s):  
Pore Structure ◽  
Lightweight Concrete ◽  
Chloride Ion ◽  
Lightweight Aggregate ◽  
Total Porosity ◽  
Normal Weight ◽  
Mineral Admixture ◽  
Mineral Admixtures ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete

This paper presents an experimental study on the permeability and the pore structure of lightweight concrete with fly ash, zeolite powder, or silica fume, in comparison to that of normal weight aggregate concrete. The results showed that the mineral admixtures can improve the anti-permeability performance of lightweight aggregate concrete, and mixed with compound mineral admixtures further more. The resistance to chloride-ion permeability of light weight concrete was higher than that of At the same strength grade, the anti-permeability performance of lightweight aggregate concrete is better than that of normal weight aggregate concrete. The anti-permeability performance of LC40 was similar to that of C60. Mineral admixtures can obviously improve the pore structure of lightweight aggregate concrete, the total porosity reduced while the pore size decreased.

scholarly journals Green and Durable Lightweight Aggregate Concrete: The Role of Waste and Recycled Materials

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 3041 ◽  
Author(s):  
Jiyu Wang ◽  
Kai Zheng ◽  
Na Cui ◽  
Xin Cheng ◽  
Kai Ren ◽  
...  
Keyword(s):  
Solid Waste ◽  
Negative Impact ◽  
Lightweight Aggregate ◽  
Cementitious Materials ◽  
Environmental Benefits ◽  
Industrial Wastes ◽  
Lightweight Aggregate Concrete ◽  
Future Research ◽  
Aggregate Concrete ◽  
By Products

Lightweight aggregate concrete manufactured by solid waste or recycled by-products is a burgeoning topic in construction and building materials. It has significant merits in mitigating the negative impact on the environment during the manufacturing of Portland cement and reduces the consumption of natural resources. In this review article, the agricultural and industrial wastes and by-products, which were used as cementitious materials and artificial lightweight aggregate concrete, are summarized. Besides, the mechanical properties, durability, and a few advanced microstructure characterization methods were reviewed as well. This review also provides a look to the future research trends that may help address the challenges or further enhance the environmental benefits of lightweight aggregate concrete manufactured with solid waste and recycled by-products.

scholarly journals Utilization of Cementitious Materials with Cold-bonded Artificial Aggregate in Concrete

2019 ◽  
Vol 9 (1) ◽  
pp. 385-388
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Cementitious Materials ◽  
Lightweight Aggregate Concrete ◽  
Optimum Level ◽  
Aggregate Concrete ◽  
Glass Fibres ◽  
Granulated Blast Furnace Slag

This article investigates the slump and compressive strength of artificial lightweight aggregate concrete with Ground Granulated Blast Furnace Slag (GGBFS) and Silica Fume with glass fibres. The increase in usage of cement in the construction industry is a concern for ecological deterioration, in this view; artificial aggregates was manufactured with major amount of fly ash and replacement of cement with various industrial by-products in concrete. An optimum level of GGBFS from 10 to 50% and Silica Fume from 2 to 6% with addition of glass fibres was assessed based on compressive strength values. The compressive strength was conducted for 7 and 28Days of water curing on M30 grade lightweight concrete with constant water to cement ratio as 0.45 and 0.2% of Master Gelenium super plasticizer. The conclusions achieved from the compressive strength of concrete containing GGBFS and Silica Fume was increased as the curing time increases. As a result lightweight aggregate concrete with a cement content of 226 kg/m3 develops 37.3 N/mm2 compressive strength.

Durability of Normal and Lightweight Aggregate Mortars with Different Supplementary Cementitious Materials

2021 ◽  
Vol 17 ◽  
pp. 271-281
Author(s):  
Efstratios Badogiannis ◽  
Eirhnh Makrinou ◽  
Marianna Fount
Keyword(s):  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Lightweight Aggregate ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Granulated Blast Furnace Slag ◽  
Binder Ratio ◽  
Pumice Sand ◽  
Water To Binder Ratio ◽  
Furnace Slag

A study on the durability parameters of normal and lightweight aggregate mortars, incorporated different supplementary cementitious materials (SCM) is presented. Mortars were prepared using limestone or pumice as aggregates and Metakaolin, Fly ash, Granulated Blast Furnace Slag and Silica Fume, as SCM, that they replaced cement, at 10 % by mass. Ten different mortars, having same water to binder ratio and aggregate to cement volumetric ratio, they were compared mainly in terms of durability. The use of pumice sand was proved to be effective not only to the density of the mortars as it was expected, but also in durability, fulfilling at the same time minimum strength requirements. The addition of the different SCM further enhanced the durability of the mortars, where Metakaolin was found to be the most effective one, especially against chloride’s ingress.

Sign in / Sign up

Export Citation Format

Share Document