scholarly journals Ultraviolet Fluorescence in the Assessment of Quality in the Mixing of Granular Material

2020 ◽  
Vol 12 (4) ◽  
pp. 1546
Author(s):  
Dominika Barbara Matuszek
Keyword(s):  
Control Method ◽  
Digital Camera ◽  
Mixing Process ◽  
Fluorescent Substance ◽  
Weight Method ◽  
Mixed Material ◽  
Funnel Flow ◽  
Comparison Of The Results ◽  
Uv Lamps

The aim of the study was to determine the possibility of using ultraviolet fluorescence to evaluate the quality of the mixing process of industrial feed. A laboratory funnel-flow mixer was used for the mixing process. The studies were carried out using three different feeds for pigs. A key component in the form of ground grains of yellow maize covered with the fluorescent substance Rhodamine B was introduced into the mixer before the mixing process began. After the illumination of the sample by UV lamps, the images were taken with a digital camera. The images were analyzed in Patan® software. The information obtained on the percentage content of the key component was used for further calculations. At the same time, the tracer content was determined using the control method (weight method). The comparison of the results obtained by the two methods (statistical comparative analysis) did not indicate significant differences. Therefore, the usefulness of the proposed method to track the share of the key component by inducing it to glow in the ultraviolet light has been proven. The introduced tracer is also one of the components of the feed, which translates into the possibility of observing the material having the characteristics of a mixed material.

The Control Method of Quality of Mixing Process in Particleboard Production

1986 ◽  
Vol 19 (12) ◽  
pp. 187-189
Author(s):  
O.G. Barashko ◽  
P.V. Polzik
Keyword(s):  
Control Method ◽  
Mixing Process

Expert System for Quality Assessment of Electronic Book Exhibitions

2013 ◽  
pp. 32-39
Author(s):  
Svetlana V. Savkina
Keyword(s):  
Expert System ◽  
Quality Assessment ◽  
Electronic Book ◽  
Electronic Books ◽  
Comparison Of The Results

The article presents the results of testing the complex methodology of assessment of quality of electronic books exhibitions (EBE). The author describes the project of the expert system, allowing to implement the EBE assessment without the experts’ participation. There is given the comparison of the results of assessments, carried out by experts and by the expert system.

METHODS ASSESSMENT QUALITY OF ACCOUNTING REPORTING AND MODELS OF THEIR MEASUREMENT

2020 ◽  
Vol 3 (3) ◽  
pp. 95-99
Author(s):  
E. H. ABU ◽  
Keyword(s):  
Internal Control ◽  
Stock Prices ◽  
Control Method ◽  
Financial Statements ◽  
Accounting Conservatism ◽  
Standardized Assessment ◽  
Accrual Quality ◽  
Indirect Measures

The article explores individual approaches used to measure and evaluate the quality of financial state-ments: standardized assessment, accrual-based models (accrual quality), Beneise models (M-Score), in-dexes - the internal control method and the degree of accounting conservatism. The reason for the great dependence on the use of indirect measures (proxies for the quality of financial statements or stock prices) is that some of the qualities of financial statements are unobservable.

Quality Improvement of the DNA extracted by boiling method in Gram negative bacteria

2017 ◽  
Vol 6 (04) ◽  
pp. 5347 ◽  
Author(s):  
Omar B. Ahmed* ◽  
Anas S. Dablool
Keyword(s):  
Dna Extraction ◽  
Control Method ◽  
Extraction Procedure ◽  
Cost Effective ◽  
High Yield ◽  
Gram Negative Bacteria ◽  
Bacterial Dna ◽  
Gram Negative ◽  
E Coli

Several methods of Deoxyribonucleic acid (DNA) extraction have been applied to extract bacterial DNA. The amount and the quality of the DNA obtained for each one of those methods are variable. The study aimed to evaluate bacterial DNA extraction using conventional boiling method followed by alcohol precipitation. DNA extraction from Gram negative bacilli was extracted and precipitated using boiling method with further precipitation by ethanol. The extraction procedure performed using the boiling method resulted in high DNA yields for both E. coli and K. pneumoniae bacteria in (199.7 and 285.7μg/ml, respectively) which was close to control method (229.3 and 440.3μg/ml). It was concluded that after alcohol precipitation boiling procedure was easy, cost-effective, and applicable for high-yield quality of DNA in Gram-negative bacteria.

Performance Improvement of SVPWM-Based Three-Phase Grid-Connected Inverters

2013 ◽  
Vol 732-733 ◽  
pp. 1261-1264
Author(s):  
Zhi Lei Yao ◽  
Lan Xiao ◽  
Jing Xu
Keyword(s):  
Dynamic Response ◽  
Control Strategy ◽  
Pulse Width Modulation ◽  
Control Method ◽  
Grid Current ◽  
Current Controller ◽  
Three Phase ◽  
Reference Grid ◽  
Grid Connected Inverter

An improved control strategy for three-phase grid-connected inverters with space vector pulse width modulation (SVPWM) is proposed. When the grid current contains harmonics, the d-and q-axes grid currents is interacted in the traditional control method, and the waveform quality of the grid current is poor. As the reference output voltage cannot directly reflect the change of the reference grid current with the traditional control strategy, the dynamic response of the grid-connected inverter is slow. In order to solve the aforementioned problems, the d-and q-axes grid currents in the decoupled components of the grid current controller are substituted by the d-and q-axes reference grid currents, respectively. The operating principles of the traditional and proposed control methods are illustrated. Experimental results show that the grid-connected inverter with the improved control strategy has high waveform quality of the grid current and fast dynamic response.

A simple method for evaluating image quality of screen-film system using a high-performance digital camera

2009 ◽  
Author(s):  
Naotoshi Fujita ◽  
Asumi Yamazaki ◽  
Katsuhiro Ichikawa ◽  
Yoshie Kodera
Keyword(s):  
Image Quality ◽  
High Performance ◽  
Digital Camera ◽  
Film System ◽  
Simple Method

The Application of S7-200 PLC Reactive Compensation Device in Small Substation

2012 ◽  
Vol 479-481 ◽  
pp. 1476-1480
Author(s):  
Qing He Chu ◽  
Wen Si Cao ◽  
Zhen Nie
Keyword(s):  
Reactive Power ◽  
Control Method ◽  
High Reliability ◽  
Reactive Power Compensation ◽  
Control Device ◽  
Reactive Compensation ◽  
Reconstruction Project ◽  
Compensation Device ◽  
And Control

In the present rural power grid reconstruction project ,according to the problems of capacitor reactive power compensation in rural small substation. Take a small substation for instance, according to its operation and control method, set the criterion of the capacitor bank switching. A new high reliability, flexible reactive power compensation control device based on s7-200 PLC is designed. It plays an important role in improving the power supply , guaranteeing the quality of voltage, reducing the loss of rural power gid.

scholarly journals QoS Management for Embedded Databases in Multicore-Based Embedded Systems

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Woochul Kang ◽  
Jaeyong Chung
Keyword(s):  
Embedded Systems ◽  
Real Time ◽  
Control Method ◽  
Network Connectivity ◽  
Time Data ◽  
Quality Of Data ◽  
Multiple Control ◽  
Data Intensive ◽  
Real Time Data

With ubiquitous deployment of sensors and network connectivity, amounts of real-time data for embedded systems are increasing rapidly and database capability is required for many embedded systems for systematic management of real-time data. In such embedded systems, supporting the timeliness of tasks accessing databases is an important problem. However, recent multicore-based embedded architectures pose a significant challenge for such data-intensive real-time tasks since the response time of accessing data can be significantly affected by potential intercore interferences. In this paper, we propose a novel feedback control scheme that supports the timeliness of data-intensive tasks against unpredictable intercore interferences. In particular, we use multiple inputs/multiple outputs (MIMO) control method that exploits multiple control knobs, for example, CPU frequency and the Quality-of-Data (QoD) to handle highly unpredictable workloads in multicore systems. Experimental results, using actual implementation, show that the proposed approach achieves the target Quality-of-Service (QoS) goals, such as task timeliness and Quality-of-Data (QoD) while consuming less energy compared to baseline approaches.

scholarly journals Research on Multi-Stage Composite Loading Process Control Method for Roller Staking of Self-Lubricating Spherical Plain Bearings

2021 ◽  
Vol 11 (23) ◽  
pp. 11127
Author(s):  
Qiang Wang ◽  
Jigang Chen ◽  
Haili Zhou ◽  
Xiaokang Wang ◽  
Zhanqi Hu
Keyword(s):  
Process Control ◽  
Control Method ◽  
Groove Depth ◽  
Material Damage ◽  
Technical Standards ◽  
Deformation Degree ◽  
Loading Process ◽  
Time Control ◽  
Multi Stage

The staking quality of Self-lubricating Spherical Plain Bearings (SSPBs) directly affects the safety of aircraft and the service life of bearings. Reliable loading process control methods and precise process parameter indexes will come into the creation of efficacious staking quality. Therefore, this paper aims to analyze the mechanical state of the roller staking process and give a load control method and corresponding parameter indexes for the high-quality roller staking process. First, based on the analysis of quality inspection requirements, five states of the deformation degree of the flanging lip of the V groove during the roller staking process were proposed, and their relationship with the requirements was studied. Then, the mechanical states corresponding to the five deformation states of the flanging lip deformation were obtained by numerical simulation, and the feeding displacement was determined. Meanwhile, a Multi-Stage Composite Loading (MSCL) process control method was first proposed to control the material damage of the flanging lip, i.e., the rotate speed of the roller tool was constant during the roller staking process, and the displacement–time control was adopted first; when the staking load reaches a staking value, the force–time control was used to make the staking quality meet the requirements. Finally, the staking quality of the MSCL method was verified though the test. The research shows that the feeding displacement needs to be added to the requirements, and the recommended value is 0.5–0.6 times of the V groove depth. A good surface quality and non-material-damage of the flanging lip is more likely to be obtained by the MSCL process control method. The research reveals the formation mechanism of process deformation, and gives more precise process control indexes. At the same time, it provides a theoretical reference for more reliable technical standards.

scholarly journals Assessment of vehicle brake control functional stability

2021 ◽  
Vol 12 (2) ◽  
pp. 33-44
Author(s):  
Volodymyr Volkov ◽  
◽  
Igor Gritsuk ◽  
Tetiana Volkova ◽  
Volodymyr Kuzhel ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Control Method ◽  
Operating Conditions ◽  
National Standards ◽  
Passenger Vehicles ◽  
The Difference ◽  
Braking Control ◽  
The Stability ◽  
Friction Surfaces

The article is devoted to the study of the influence of the brake control elements of passenger vehicles on the stability of their braking properties. The analysis of the influence of uneven braking forces on the wheels of one axle of vehicles on the deviation of the distribution of braking forces between the axles from its calculated value is carried out. When assessing the error in regulating the distribution of braking forces between the axles of vehicles, three components were taken into account: the theoretical error due to the imperfection of the selected control method (the difference between the actual calculated control characteristic from the ideal), the error created due to the instability of the ratio of the braking forces on the front and rear wheels, an additional error caused by the unevenness of the braking forces on the wheels of individual axles, since the fulfillment of the most stringent requirements of international and national standards for the efficiency of braking of vehicles and is inextricably linked with the need to increase the energy consumption of brake mechanisms. The energy consumption of braking mechanisms is understood as the ability of the latter to dissipate the greatest amount of energy of the braking machine without reducing the braking efficiency indicators to the minimum permissible level. Excessive heating of the braking mechanisms leads to a decrease in the friction coefficient μ of the friction surfaces and increased wear of the friction linings, and the brakes are the most unstable element of the braking control, which ensures the absorption and dissipation of the vehicle's energy during braking. The instability of the braking torques on the front and rear wheels, caused by a change in the coefficients of friction of friction pairs, leads not only to a change in the distribution of braking forces between the axles and individual wheels, but also to a decrease in the braking efficiency of vehicles under operating conditions. A method is proposed that makes it possible to assess the quality of regulation of the distribution of braking forces between the axles of a car, taking into account the instability of the braking forces on the wheels.

Sign in / Sign up

Export Citation Format

Share Document