scholarly journals Optimization of Fuel Injection Parameters of Moringa oleifera Biodiesel-Diesel Blend for Engine-Out-Responses Improvements

Symmetry ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 982
Author(s):  
Yew Heng Teoh ◽  
Heoy Geok How ◽  
Farooq Sher ◽  
Thanh Danh Le ◽  
Hwai Chyuan Ong ◽  
...  
Keyword(s):  
Diesel Engines ◽  
Fossil Fuels ◽  
Moringa Oleifera ◽  
Fuel Injection ◽  
Injection Pressure ◽  
Single Step ◽  
Rapid Decline ◽  
Fuel Blend ◽  
Combustion Dynamics ◽  
Rsm Optimization

Biodiesel has gained popularity in diesel engines as a result of the rapid decline of fossil fuels and population growth. The processing of biodiesel from non-edible Moringa Oleifera was investigated using a single-step transesterification technique. Both fuels had their key physicochemical properties measured and investigated. In a common-rail diesel engine, the effects of MB50 fuel blend on the symmetric characteristics of engine-out responses were evaluated under five load settings and at 1000 rpm. As compared to standard diesel, MB50 increased brake thermal efficiency (BTE), and nitrogen oxides (NOx) emissions while lowering brake specific fuel consumption (BSFC), and smoke emissions for all engine loads. A further study of injection pressure and start of injection (SOI) timing for MB50 fuel was optimized using response surface methodology (RSM). The RSM optimization resulted in improved combustion dynamics due to symmetry operating parameters, resulting in a simultaneous decrease in NOx and smoke emissions without sacrificing BTE. RSM is an efficient optimization method for achieving optimal fuel injection parameter settings, as can be deduced. As a result, a clearer understanding of the use of MB50 fuel in diesel engines can be given, allowing for the best possible engine efficiency.

Experimental Investigation on Emission Characteristics of Diesel N-Pentanol Blend in Homogeneous Charged Compression Ignition Engine

2021 ◽  
Vol 13 (3) ◽  
Author(s):  
S. Mathavan ◽  
T. Mothilal ◽  
V. Andal ◽  
V. Velukumar
Keyword(s):  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Fuel Injection ◽  
Injection Pressure ◽  
Injection Timing ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Fuel Injection Pressure

The invention of internal combustion engines is undoubtedly one of the greatest inventions of the modern era. There has been steady scientific research to look for alternative fuel which is economical, renewable and less harmful to nature and man compared to fossil fuels. The present project is one such experimental work to investigate the performance of a blend of diesel / N-pentanol in an appropriate combustion technique and to establish its suitability as a renewable fuel. The relative performance of diesel fuel and the blend of diesel / n-pentanol will also be analyzed. Diesel fuel blended with 30 percentage n-pentanol is the fuel blend that is proposed to be used in the experiment. Researchers have established that the application of Homogeneously Charged Compression Ignition (HCCI) technique could result in in-cylinder reduction of NOx and PM. Higher thermal efficiency could also be attained. The project also covers studying the emission effect of the diesel/n-pentanol fuel blend for various fuel injection timing, various fuel injection pressure, different EGR rates and different inlet air temperature.

scholarly journals Influence of Fuel Injection Pressure on the Emissions Characteristics and Engine Performance in a CRDI Diesel Engine Fueled with Palm Biodiesel Blends

Energies ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3837 ◽  
Author(s):  
Sam Ki Yoon ◽  
Jun Cong Ge ◽  
Nag Jung Choi
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Fuel Injection ◽  
Injection Pressure ◽  
Biodiesel Fuel ◽  
Nox Emissions ◽  
Oxides Of Nitrogen ◽  
Fuel Blend ◽  
Engine Load ◽  
Fuel Injection Pressure

This experiment investigates the combustion and emissions characteristics of a common rail direct injection (CRDI) diesel engine using various blends of pure diesel fuel and palm biodiesel. Fuel injection pressures of 45 and 65 MPa were investigated under engine loads of 50 and 100 Nm. The fuels studied herein were pure diesel fuel 100 vol.% with 0 vol.% of palm biodiesel (PBD0), pure diesel fuel 80 vol.% blended with 20 vol.% of palm biodiesel (PBD20), and pure diesel fuel 50 vol.% blended with 50 vol.% of palm biodiesel (PBD50). As the fuel injection pressure increased from 45 to 65 MPa under all engine loads, the combustion pressure and heat release rate also increased. The indicated mean effective pressure (IMEP) increased with an increase of the fuel injection pressure. In addition, for 50 Nm of the engine load, an increase to the fuel injection pressure resulted in a reduction of the brake specific fuel consumption (BSFC) by an average of 2.43%. In comparison, for an engine load of 100 Nm, an increase in the fuel injection pressure decreased BSFC by an average of 0.8%. Hydrocarbon (HC) and particulate matter (PM) decreased as fuel pressure increased, independent of the engine load. Increasing fuel injection pressure for 50 Nm engine load using PBD0, PBD20 and PBD50 decreased carbon monoxide (CO) emissions. When the fuel injection pressure was increased from 45 MPa to 65 MPa, oxides of nitrogen (NOx) emissions were increased for both engine loads. For a given fuel injection pressure, NOx emissions increased slightly as the biodiesel content in the fuel blend increased.

scholarly journals Experimental Methodology and Facility for the J69-Engine Performance and Emissions Evaluation Using Jet A1 and Biodiesel Blends

Energies ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4530 ◽  
Author(s):  
Gabriel Talero ◽  
Camilo Bayona-Roa ◽  
Giovanny Muñoz ◽  
Miguel Galindo ◽  
Vladimir Silva ◽  
...  
Keyword(s):  
Fossil Fuels ◽  
Fuel Injection ◽  
Engine Performance ◽  
Injection Pressure ◽  
Experimental Tests ◽  
Experimental Methodology ◽  
Injection System ◽  
Small Scale ◽  
Gas Temperature ◽  
Maximum Increase

Aeronautic transport is a leading energy consumer that strongly contributes to greenhouse gas emissions due to a significant dependency on fossil fuels. Biodiesel, a substitution of conventional fuels, is considered as an alternative fuel for aircrafts and power generation turbine engines. Unfortunately, experimentation has been mostly limited to small scale turbines, and technical challenges remain open regarding operational safety. The current study presents the facility, the instrumentation, and the measured results of experimental tests in a 640 kW full-scale J69-T-25A turbojet engine, operating with blends of Jet A1 and oil palm biodiesel with volume contents from 0% to 10% at different load regimes. Findings are related to the fuel injection system, the engine thrust, and the emissions. The thrust force and the exhaust gas temperature do not expose a significant variation in all the operation regimes with the utilization of up to 10% volume content of biodiesel. A maximum increase of 36% in fuel consumption and 11% in injection pressure are observed at idle operation between B0 and B10. A reduction of the CO and HC emissions is also registered with a maximum variation at the cruise regime (80% Revolutions Per Minute—RPM).

scholarly journals Use of biogas to power diesel engines with common rail fuel systems

2018 ◽  
Vol 182 ◽  
pp. 01018
Author(s):  
Sławomir Wierzbicki ◽  
Michał Śmieja
Keyword(s):  
Diesel Engines ◽  
Alternative Energy ◽  
Liquid Fuel ◽  
Fossil Fuels ◽  
Fuel Injection ◽  
Raw Materials ◽  
Common Rail ◽  
Dual Fuel ◽  
Alternative Energy Sources ◽  
Study Results

The limited resources of fossil fuels, as well as the search for a reduction in emissions of carbon dioxide and other toxic compounds to the atmosphere have prompted the search for new, alternative energy sources. One of the potential fuels which may be widely used in the future as a fuel is biogas which can be obtained from various types of raw materials. The article presents selected results as regards the effects of the proportion of biogas of various compositions on the course of combustion in a dual-fuel diesel engine with a Common Rail fuel system. The presented study results indicate the possibility for the use of fuels of this type in diesel engines; although changes are necessary in the manner of controlling liquid fuel injection.

Direct Water Injection to Improve Diesel Spray Combustion

2003 ◽  
Author(s):  
Koji Takasaki ◽  
Tatsuo Takaishi ◽  
Hiroyuki Ishida ◽  
Keijirou Tayama
Keyword(s):  
Diesel Engines ◽  
High Speed ◽  
Fuel Injection ◽  
Nox Reduction ◽  
Water Injection ◽  
Injection Pressure ◽  
Injection System ◽  
Injection Hole ◽  
Low Speed ◽  
Direct Water Injection

Now, it is essential to apply some measures for NOx reduction to low-speed diesel engines emitting much more NOx than high-speed engines. At the same time PM emission must be reduced especially when bunker fuel or heavy fuel is burned. This paper describes the applications of SFWI (Stratified Fuel Water Injection) system and DWI (Direct Water Injection) system to large sized diesel engines to reduce NOx and PM emission. SFWI system makes it possible to inject water during fuel injection from the same nozzle hole without mixing the liquids. DWI system injects water with high injection pressure from the other injection hole than the fuel injection hole into the combustion chamber directly. For testing both the systems, a 2-stroke-cycle low-speed test engine was used.

scholarly journals Optimization of Injection Pressure and Injection Timing on Fuel Sprays, Engine Performances and Emissions on a Developed DI 20C Biodiesel Engine Prototype

2020 ◽  
Vol 38 (4) ◽  
pp. 827-838
Author(s):  
Bambang Sudarmanta ◽  
Alham A.K. Mahanggi ◽  
Dori Yuvenda ◽  
Hary Soebagyo
Keyword(s):  
Fossil Fuels ◽  
Fuel Injection ◽  
Cetane Number ◽  
Injection Pressure ◽  
Injection Timing ◽  
Spray Characteristics ◽  
Injection Parameter ◽  
Optimal Injection ◽  
Fuel Injection Pressure ◽  
Start Of Combustion

Biodiesel, as a renewable fuel that has the potential to replace diesel fossil fuels. With properties in the form of viscosity, density, and surface tension, which are higher than diesel fossil fuel, biodiesel produces poor spray characteristics, and also the high cetane number and oxygen content so that the ignition delay is shorter causes the start of combustion will shift more forward, therefore need to improve injection parameters including injection pressure and timing. The aim of this research is to get the optimal injection parameter optimization so as to improve engine performances and emissions. The method used is to increase the fuel injection pressure from 200 to 230 kg/cm2 and the injection timings were retarded from 22° to 16° BTDC. The results show that increasing injection pressure can improve spray characteristics as indicated by shorter penetration and smaller spray diameter of 30% and 9.8%, respectively and increase in spray spread angle of 21.9%. Then the optimization of engine performances and emissions, obtained at an injection pressure of 230 kg/cm2 and injection timing of 16° BTDC with an increase of power and thermal efficiency of 3.9% and 13.9%, respectively and reduction in smoke emissions of 45.2% at high load.

scholarly journals Spray Characteristics at Preheating Temperatur of Diesel-Biodiesel-Gasoline Fuel Blend

2021 ◽  
Vol 5 (2) ◽  
pp. 134
Author(s):  
Moch Miftahul Arifin ◽  
Nasrul Ilminnafik ◽  
Muh. Nurkoyim Kustanto ◽  
Agus Triono
Keyword(s):  
Diesel Engines ◽  
High Speed ◽  
Fuel Injection ◽  
Fuel Mixture ◽  
Spray Angle ◽  
Injection System ◽  
Spray Characteristics ◽  
Fuel Blend ◽  
Spray Tip Penetration

Technological developments in diesel engines require improvements to the fuel injection system to meet the criteria for economical, high-power and efficient combustion and meet environmental regulatory standards. One method that has a lot of interest is changing the characteristics of the fuel, with the aim of producing optimal combustion. Spray characteristics have a big role in determining the quality of combustion in diesel engines. A good spray can improve the quality of fuel atomization and the homogeneity of the air-fuel mixture in the combustion chamber so that it can produce good engine performance and low emissions. This study aims to determine the effect of a diesel-biodiesel (Calophyllum inophyllum)-gasoline blendandfuel heating on the spray characteristics. The research was conducted with variations in composition (B0, B100, B30, B30G5 and B30G10) and fuel heating (40, 60, 80, and 100 °C). Fuel injected atapressure of 17 MPa in to a pressure chamber of 3 bar. The spray formed was recorded with a high-speed camera of 480 fps (resolution 224x168 pixel). In B100 biodiesel, the highest viscosity and density cause high spray tip penetration, small spray angle, and high spray velocity. The addition of diesel oil, gasoline, and heating fuel reduces the viscosity and density so that the spray tip penetration decreases, the spray angle increases and the velocity of spray decreases.

Experimental Stand to Investigate the Injection Process in Diesel Engines

2021 ◽  
Vol 42 ◽  
pp. 79-84
Author(s):  
Dragoș Tutunea ◽  
Ilie Dumitru ◽  
Laurenţiu Racilă
Keyword(s):  
Diesel Engines ◽  
Electric Motor ◽  
High Performance ◽  
Fuel Injection ◽  
Combustion Process ◽  
Injection Pressure ◽  
Injection System ◽  
Injection Process ◽  
Experimental Stand ◽  
Fuel Injection Pressure

The objective of this paper is to investigate the fuel injection system in diesel engines by using inline pumps. In a diesel engines, the fuel injection pressure plays an important role in the combustion process in order to obtain high performance and low fuel consumption. The experiments in this paper are been performed on a 6 cylinder inline pump which is actioned by an electric motor with variable r.p.m.-s The quantity of the fuel injected by each injector is measured function of time and the speed of electric motor. The experiments show the degree of non-uniformity of the fuel delivered by the pump to injectors.

Sign in / Sign up

Export Citation Format

Share Document