scholarly journals Use of biogas to power diesel engines with common rail fuel systems

2018 ◽  
Vol 182 ◽  
pp. 01018
Author(s):  
Sławomir Wierzbicki ◽  
Michał Śmieja

The limited resources of fossil fuels, as well as the search for a reduction in emissions of carbon dioxide and other toxic compounds to the atmosphere have prompted the search for new, alternative energy sources. One of the potential fuels which may be widely used in the future as a fuel is biogas which can be obtained from various types of raw materials. The article presents selected results as regards the effects of the proportion of biogas of various compositions on the course of combustion in a dual-fuel diesel engine with a Common Rail fuel system. The presented study results indicate the possibility for the use of fuels of this type in diesel engines; although changes are necessary in the manner of controlling liquid fuel injection.

2021 ◽  
Vol 311 ◽  
pp. 05003
Author(s):  
Yulia Anatolyevna Antokhina ◽  
Galina Yuryevna Peshkova ◽  
Elena Grigoryevna Bondar

The authors analyzed the current situation related to the global consumption of fossil fuels, as well as environmental problems caused by their extraction, production and consumption. The official statistical data were used, reflecting the volumes of export of fossil raw materials from the Russian Federation, the directions of raw materials flows, characterizing the demand for oil, gas, peat coal in international trade. The authors note that negative factors caused by currency fluctuations, pandemic and other factors did not lead to global changes in the fossil fuel market. The article presents the provisions of international documents adopted in order to prevent climate warming by reducing greenhouse gas emissions. In addition, attention is focused on distribution of responsibility between the developed and developing countries of the world. The authors analyzed the measures implemented in the territory of the Russian Federation, and identified positive trends to reduce emissions of pollutants into the atmosphere. Wherein, the article reflects the environmental risks associated with use of alternative energy sources and nuclear facilities, the assessment of which must be carried out during commissioning the corresponding facilities.


Symmetry ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 982
Author(s):  
Yew Heng Teoh ◽  
Heoy Geok How ◽  
Farooq Sher ◽  
Thanh Danh Le ◽  
Hwai Chyuan Ong ◽  
...  

Biodiesel has gained popularity in diesel engines as a result of the rapid decline of fossil fuels and population growth. The processing of biodiesel from non-edible Moringa Oleifera was investigated using a single-step transesterification technique. Both fuels had their key physicochemical properties measured and investigated. In a common-rail diesel engine, the effects of MB50 fuel blend on the symmetric characteristics of engine-out responses were evaluated under five load settings and at 1000 rpm. As compared to standard diesel, MB50 increased brake thermal efficiency (BTE), and nitrogen oxides (NOx) emissions while lowering brake specific fuel consumption (BSFC), and smoke emissions for all engine loads. A further study of injection pressure and start of injection (SOI) timing for MB50 fuel was optimized using response surface methodology (RSM). The RSM optimization resulted in improved combustion dynamics due to symmetry operating parameters, resulting in a simultaneous decrease in NOx and smoke emissions without sacrificing BTE. RSM is an efficient optimization method for achieving optimal fuel injection parameter settings, as can be deduced. As a result, a clearer understanding of the use of MB50 fuel in diesel engines can be given, allowing for the best possible engine efficiency.


Author(s):  
Bernhard Ćosić ◽  
Frank Reiss ◽  
Marc Blümer ◽  
Christian Frekers ◽  
Franklin Genin ◽  
...  

Abstract Industrial gas turbines like the MGT6000 are often operated as power supply or as mechanical drives. In these applications, liquid fuels like 'Diesel Fuel No.2' can be used either as main fuel or as backup fuel if natural gas is not reliably available. The MAN Gas Turbines (MGT) operate with the Advanced Can Combustion (ACC) system, which is capable of ultra-low NOx emissions for gaseous fuels. This system has been further developed to provide dry dual fuel capability. In the present paper, we describe the design and detailed experimental validation process of the liquid fuel injection, and its integration into the gas turbine package. A central lance with an integrated two-stage nozzle is employed as a liquid pilot stage, enabling ignition and start-up of the engine on liquid fuel only. The pilot stage is continuously operated, whereas the bulk of the liquid fuel is injected through the premixed combustor stage. The premixed stage comprises a set of four decentralized nozzles based on fluidic oscillator atomizers, wherein atomization of the liquid fuel is achieved through self-induced oscillations. We present results illustrating the spray, hydrodynamic, and emission performance of the injectors. Extensive testing of the burner at atmospheric and full load high-pressure conditions has been performed, before verification within full engine tests. We show the design of the fuel supply and distribution system. Finally, we discuss the integration of the dual fuel system into the standard gas turbine package of the MGT6000.


Author(s):  
Kau-Fui Vincent Wong ◽  
Guillermo Amador

As society continues advancing into the future, more energy is required to supply the increasing population and energy demands. Unfortunately, traditional forms of energy production through the burning of carbon-based fuels are dumping harmful pollutants into the environment, resulting in detrimental, and possibly irreversible, effects on our planet. The burning of coal and fossil fuels provides energy at the least monetary cost for countries like the US, but the price being paid through their negative impact of our atmosphere is difficult to quantify. A rapid shift to clean, alternative energy sources is critical in order to reduce the amount of greenhouse gas emissions. For alternative energy sources to replace traditional energy sources that produce greenhouse gases, they must be capable of providing energy at equal or greater rates and efficiencies, while still functioning at competitive prices. The main factors hindering the pursuit of alternative sources are their high initial costs and, for some, intermittency. The creation of electrical energy from natural sources like wind, water, and solar is very desirable since it produces no greenhouse gases and makes use of renewable sources—unlike fossil fuels. However, the planning and technology required to tap into these sources and transfer energy at the rate and consistency needed to supply our society comes at a higher price than traditional methods. These high costs are a result of the large-scale implementation of the state-of-the-art technologies behind the devices required for energy cultivation and delivery from these unorthodox sources. On the other hand, as fossil fuel sources become scarcer, the rising fuel costs drive overall costs up and make traditional methods less cost effective. The growing scarcity of fossil fuels and resulting pollutants stimulate the necessity to transition away from traditional energy production methods. Currently, the most common alternative energy technologies are solar photovoltaics (PVs), concentrated solar power (CSP), wind, hydroelectric, geothermal, tidal, wave, and nuclear. Because of government intervention in countries like the US and the absence of the need to restructure the electricity transmission system (due to the similarity in geographical requirements and consistency in power outputs for nuclear and traditional plants), nuclear energy is the most cost competitive energy technology that does not produce greenhouse gases. Through the proper use of nuclear fission electricity at high efficiencies could be produced without polluting our atmosphere. However, the initial capital required to erect nuclear plants dictates a higher cost over traditional methods. Therefore, the government is providing help with the high initial costs through loan guarantees, in order to stimulate the growth of low-emission energy production. This paper analyzes the proposal for the use of nuclear power as an intermediate step before an eventual transition to greater dependence on energy from wind, water, and solar (WWS) sources. Complete dependence on WWS cannot be achieved in the near future, within 20 years, because of the unavoidable variability of these sources and the required overhaul of the electricity transmission system. Therefore, we look to nuclear power in the time being to help provide predictable power as a means to reduce carbon emissions, while the other technologies are refined and gradually implemented in order to meet energy demand on a consistent basis.


2021 ◽  
Author(s):  
Zeynu Shamil Awol ◽  
Rezika Tofike Abate

Abstract Biomass energy is renewable energy source that comes from the material of plants and animals. Forms of biomass energy are bio-ethanol, bio methanol, and biodiesel. Bio-ethanol is one of the most important alternative energy sources that substitute the fossil fuels. The focus of this research is to produce bio-ethanol from waste office paper. Five laboratory experiments were conducted to produce bio-ethanol from wastepaper. The wastepaper was dried in oven and cut in to pieces. Then it passed through dilute acid hydrolysis, fermentation and distillation process respectively. High amount of ethanol was observed at 20 ml/g (liquid to solid ratio) and at the time of 2hr. Cost and economic analysis for ethanol production from wastepaper was performed. Results from the analysis indicated a paper to ethanol plant was feasible from the economic point of view with rate of return (RR) 38.61% and the payback period of 2.2 years.


2021 ◽  
Author(s):  
M. Opara ◽  
Natalia Azarova

Currently, an urgent issue is the preservation of the environment, the cyclical use of waste for the production of new products, the preservation and multiplication of the planet’s natural resources. After all, the quality of life of each person directly depends on the state of the environment and the factors that affect its preservation. These factors are an integral part of the development of a green economy. This article discusses the possibility of producing alternative energy sources, such as biofuels of three generations.The first generation is solid, liquid, and gaseous biofuels. Second-generation fuel is obtained from the biomass of plant and animal material residues, or grown crops. As an example, such a type of fuel as biogas, which consists of carbon dioxide and methane, and with its further processing, namely the separation of carbon dioxide, you can get biomethane. In the same way, such fuels as biodiesel and bioethanol can be obtained from the biological mass. And the most unusual raw material for the production of third-generation fuel is biofuel from algae. Unfortunately, the development of the green economy in Russia is taking slow steps, but at present this issue is being paid more attention. The development of technologies for obtaining alternative energy sources will allow us to produce not only new types of energy, but also to preserve the environment of our priceless planet, through the use of raw materials and waste that are not in demand in everyday human life.


2016 ◽  
Vol 19 (3) ◽  
pp. 96-109
Author(s):  
Phung Thi Kim Le ◽  
Viet Tan Tran ◽  
Thien Luu Minh Nguyen ◽  
Viet Vuong Pham ◽  
Truc Thanh Nguyen ◽  
...  

Finding alternative energy sources for fossil fuels was a global matter of concern, especially in developing countries. Rice husk, an abundant biomass in Viet Nam, was used to partially replace fossil fuels by gasification process. The study was conducted on the pilot plant fixed bed up-draft gasifier with two kind of gasification agents, pure air and air-steam mixture. Mathematical modeling and computer simulations were also used to describe and optimize the gasification processes. Mathematical modeling was based on Computational Fluid Dynamics method and simulation was carried by using Ansys Fluent software. Changes in outlet composition of syngas components (CO, CO2, CH4, H2O, H2) and temperature of process, in relation with ratio of steam in gasification agents, were presented. Obtained results indicated concentration of CH4, H2 in outlet was increased significantly when using air-steam gasification agents than pure air. The discrepancies among the gasification agents were determined to improve the actual process.


2017 ◽  
Vol 22 (4) ◽  
pp. 805-836 ◽  
Author(s):  
Gerard van der Meijden ◽  
Sjak Smulders

The energy transition from fossil fuels to alternative energy sources has important consequences for technological change and resource extraction. We examine these consequences by incorporating a nonrenewable resource and an alternative energy source in a market economy model of endogenous growth through expanding varieties. During the energy transition, technological progress is nonmonotonic over time: It declines initially, starts increasing when the economy approaches the regime shift, and jumps down once the resource stock is exhausted. A moment of peak-oil does no longer necessarily occur, and simultaneous use of the resource and the alternative energy source will take place if the return to innovation becomes too low. Subsidies to research and development (R&D) and to renewables production speed up the energy transition, whereas a tax on fossil fuels postpones the switch to renewable energy.


Sign in / Sign up

Export Citation Format

Share Document