scholarly journals Optimisation and Modelling of Pb (II) and Cu (II) Biosorption onto Red Algae (Gracilaria changii) by Using Response Surface Methodology

Water ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 2325 ◽  
Author(s):  
Mubeen Isam ◽  
Lavania Baloo ◽  
Shamsul Rahman Mohamed Kutty ◽  
Saba Yavari
Keyword(s):  
Response Surface Methodology ◽  
Metal Ions ◽  
Response Surface ◽  
Metal Ion ◽  
Ion Concentration ◽  
Solution Ph ◽  
Gracilaria Changii ◽  
Red Macroalgae ◽  
Removal Of Metal ◽  
Removal Of Metal Ions

The removal of Pb (II) and Cu (II) ions by using marine red macroalgae (Gracilaria changii) as a biosorbent material was evaluated through the batch equilibrium technique. The effect of solution pH on the removal of metal ions was investigated within the range of 2–7. The response surface methodology (RSM) technique involving central composite design (CCD) was utilised to optimise the three main sorption parameters, namely initial metal ion concentration, contact time, and biosorbent dosage, to achieve maximum ion removal. The models’ adequacy of response was verified by ANOVA. The optimum conditions for removal of Pb (II) and Cu (II) were as follows: pH values of 4.5 and 5, initial concentrations of 40 mg/L, contact times of 115 and 45 min, and biosorbent dosage of 1 g/L, at which the maximum removal percentages were 96.3% and 44.77%, respectively. The results of the adsorption isotherm study showed that the data fitted well with the Langmuir’s model for Pb (II) and Cu (II). The results of the adsorption kinetic study showed that the data fitted well with the pseudo-second order model for Pb (II) and Cu (II). In conclusion, red alga biomass exhibits great potential as an efficient low-cost sorbent for removal of metal ions.

Research on Metal Ion Removal of Ceramic Printing Wastewater

2013 ◽  
Vol 664 ◽  
pp. 369-373 ◽  
Author(s):  
Ling Ling Shang ◽  
Ce Shi ◽  
Yong Li Zhang ◽  
Yong Min Liu
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Removal Rate ◽  
Iron Removal ◽  
Reaction Cell ◽  
Solution Ph ◽  
Flame Atomic Absorption ◽  
Removal Of Metal ◽  
Removal Of Metal Ions

The removal of the metal ions in the ceramic printing wastewater was influenced by using, stirring and precipitating of the solution pH, coagulant PAC, coagulant aid PAM and heavy metal scavenger. This experiment investigated the removal effect of the metal ions in the wastewater under different conditions. Flame atomic absorption spectrometry was adopted for the determination of the concentration of metal ions in the wastewater. The studies have shown that alkalization, PAC coagulation treatment have a role in the removal of metal ions in the ceramic printing wastewater. And the chromium and iron removal rate can reached 74.0% and 61.6% respectively. Heavy metal scavenger also have a better role in the removal of metal ions. And the chromium and iron removal rates were 82.3% and 76.2% respectively without dosing PAC. The number of reaction cell has no significant effect on the removal of metal ions.

scholarly journals STUDY OF REMOVAL OF METAL IONS IN WATER USING ZEOLITES SYNTHESIZED WITH CHARCOAL ASHES

2006 ◽  
Vol 05 (3) ◽  
pp. 21-30
Author(s):  
Denise Alves FUNGARO ◽  
Juliana de Carvalho IZIDORO
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Ion Selectivity ◽  
Coal Ash ◽  
Electroplating Effluent ◽  
Zeolitic Material ◽  
Equilibrium Data ◽  
Metal Ion Selectivity ◽  
Removal Of Metal ◽  
Removal Of Metal Ions

The capacity of synthesized zeolites from Brazilian coal ash for the removal of metal ions from aqueous solutions has been investigated. Equilibrium data obtained have been found to fit both the Langmuir and Freundlich adsorption isotherms. The zeolitic material prepared with coal ash from baghouse filter showed the highest removal efficiencies. The metal ion selectivity of this product was determined as: Pb2+ > Cd2+ > Cu2+ > Zn2+ > Ni2+. The maximum cation exchange capacities were between 32.9 and 246.9 mg g-1. Tests showed that the zeolitic material was suitable for removal of zinc from electroplating effluent.

scholarly journals A Study on the Photocatalytic Reduction of Some Metal Ions in Aqueous Solution Using UV- Titanium Dioxide System

2019 ◽  
pp. 1-7
Author(s):  
I. O. Ekwere ◽  
M. Horsfall ◽  
J. O. E. Otaigbe
Keyword(s):  
Aqueous Solution ◽  
Titanium Dioxide ◽  
Metal Ions ◽  
Metal Ion ◽  
Uv Light ◽  
Kinetic Studies ◽  
Photocatalytic Reduction ◽  
Alkaline Ph ◽  
Removal Of Metal ◽  
Removal Of Metal Ions

The photocatalytic reduction of Cu (II), Pb (II), Cd (II) and Cr (VI) ions in aqueous solution has been investigated. The photocatalyst utilized was nano titanium dioxide, composed of 80% anatase and 20% rutile; the UV light source was a 15 W UV bulb with a wavelength of 254 nm. The results obtained indicated a reduction efficiency order as follows; Cr6+ > Cu2+ > Pb2+ > Cd2+. It was observed that these results correlate with the respective reduction potentials of the metal ions. The effect of pH on the photocatalytic reduction of the metal ions was also carried out and results obtained indicated that with the exception of Cr (VI) ions, higher percentage removal of metal ions from their aqueous solution was recorded at alkaline pH than at acidic pH. This was attributed to an extensive formation of precipitate by the metal ions at alkaline pH. Kinetic studies revealed that the removal of metal ions from their solutions largely followed the pseudo- first-order kinetics. Therefore, the results of this study will be useful in metal ion removal from industrial waste water using photocatalytic process.

scholarly journals Application of response surface methodology for simultaneous removal of major cations from seawater using metal oxide nanostructures

Water SA ◽  
2020 ◽  
Vol 46 (2 April) ◽  
Author(s):  
Denga Ramutshatsha ◽  
J Catherine Ngila ◽  
Patrick G Ndungu ◽  
Philiswa N Nomngongo
Keyword(s):  
Response Surface Methodology ◽  
Metal Oxide ◽  
Response Surface ◽  
Metal Ion ◽  
Simultaneous Removal ◽  
Major Cations ◽  
Experimental Parameters ◽  
Metal Oxide Nanostructures ◽  
Metal Oxide Nanomaterials ◽  
Removal Of Metal Ions

  The objectives of this study were to assess the suitability of metal oxide nanomaterials for removal of major cations Na+, K+, Ca2+ and Mg2+ from seawater. The as-synthesised nanomaterials were characterized using different techniques, such as XRD, TEM, and BET. The simultaneous removal of Na+, K+, Ca2+ and Mg2+ ion from aqueous solutions by α-Fe2O3 and SiO2/Nb2O5/Fe2O3 nanostructures was studied using batch method. The influence of different experimental parameters (such as initial metal ion concentrations, mass of adsorbent, sample pH and contact time) that affect the simultaneous removal of metal ions was studied using response surface methodology (RSM) based on small central composite design (SCCD). Under optimised conditions, the highest percentage removal was 75%, 92%, 93% and 85% for Na+, K+, Ca2+ and Mg2+, respectively.

scholarly journals Adsorption of Cr(VI) Ions using Activated Carbon Produced from Indian Water Chestnut (Trapa natans) Peel Powder

2020 ◽  
Vol 32 (4) ◽  
pp. 876-880
Author(s):  
Maninder Singh ◽  
D. P. Tiwari ◽  
Mamta Bhagat
Keyword(s):  
Heavy Metals ◽  
Metal Ions ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Metal Ion ◽  
Ion Concentration ◽  
Solution Ph ◽  
Indian Water ◽  
Trapa Natans

The indiscriminate discharge of heavy metals into water and soil from anthropogenic practices is becoming prominent threat to the environment. Heavy metals like chromium, cadmium, lead, arsenic, nickel etc. are heavily toxic and carcinogenic in nature. This study emphasizes the adequacy of activated water chest nut (Trapa natans) peel powder as a new adsorbent material for removal of chromium(VI) metal ions. Adsorption experiments were performed in batch process. Various process parameters like contact time, temperature, solution pH, dose of adsorbent, metal ion concentration etc. were optimized. The physico-chemical properties of adsorbent material were characterized by FTIR and XRD. The morphology, topology of adsorbent surface was characterized by scanning electron microscopy (SEM) and Brunauer, Emmett and Teller (BET) which revealed a highly porous structure and available specific surface area. The adsorption capacity (maximum) was counted as 59.17 mg/g and specific surface area was found 23.467 m2/g at a pH 7. The adsorption process for Cr(VI) ions was in a good agreement with Langmuir isotherm. The process also followed pseudo second order kinetics. The obtained result shows that activated water chest nut (Trapa natans) peel powder (AWCPP) can be a hopeful low-cost and eco-friendly bio-adsorbent for removal of Cr(VI) metal ions and also better adsorbent than other various reported adsorbents.

Preparation of a Novel Adsorbent and Heavy Metal Ion Adsorption

2014 ◽  
Vol 9 (4) ◽  
pp. 155892501400900 ◽  
Author(s):  
Chuanfeng Zang ◽  
Desuo Zhang ◽  
Jiaqing Xiong ◽  
Hong Lin ◽  
Yuyue Chen
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Hyperbranched Polymer ◽  
Metal Ion ◽  
Ion Concentration ◽  
Cotton Fibers ◽  
Practical Applications ◽  
Metal Ion Adsorption ◽  
Ft Ir ◽  
Removal Of Metal Ions

The article focuses on the preparation of a novel adsorbent by grafting amino-terminated hyperbranched polymer to cotton fibers and the adsorption of heavy metal ions from aqueous solution. The prepared novel adsorbent was characterized by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The experimental results show that the amino-terminated hyperbranched polymer was grafted to the oxidized cotton fibers, and the adsorbent with amino-terminated hyperbranched polymer was successfully obtained. The grooves on the surface of the grafted cotton fiber were filled with amino-terminated hyperbranched polymer. The adsorption experiments show that the adsorption amount of Cu2+ and Pb2+ was up to 16.1 mg/g and 13.4 mg/g with the metal ion concentration of 319.5 ppm and 315.9 ppm, respectively. When the dosage of adsorbent was 1.5 g in 100 mL metal ion solution, the adsorption rate of Cu2+ and Pb2+ reached 73.5 wt. % and 71.2 wt.%, respectively. The use of the adsorbent for the removal of metal ions is considered to be efficient and have great potential for practical applications.

Equilibrium sorption of divalent metal ions onto groundnut (Arachis hypogaea) shell: kinetics, isotherm and thermodynamics

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Metal Ions ◽  
Arachis Hypogaea ◽  
Metal Ion ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Standard Entropy ◽  
Order Kinetic ◽  
Divalent Metal Ions ◽  
Solution Ph ◽  
Biosorption Process

The equilibrium, kinetics, and thermodynamics of the biosorption of Pb(II), Cd(II) and Zn(II) onto groundnut (Arachis hypogaea) shell were investigated under various physicochemical parameters. Optimisation studies were carried out using batch biosorption studies. The extent of the metal ion biosorption increased with increase in solution pH, initial metal ion concentration, dosage of biosorbent and contact time but decreased with the temperature of the system. The biosorption of each of the metal ions was found to be pH-dependent. Kinetic study showed that the metal ions biosorption process followed the pseudo-second-order kinetic model. The sorption of each metal ion was analysed with Freundlich and Langmuir isotherm models, in each case, the equilibrium data were better represented by Freundlich isotherm model. Thermodynamically, parameters such as standard Gibbs free energy (ΔG˚), standard enthalpy (ΔH˚), standard entropy (ΔS˚) and the activation energy (A) were calculated. The biosorption of each metal ion was spontaneous and the order of spontaneity of the biosorption process being Cd(II) > Zn(II) > Pb(II). Similarly, change in entropy was observed for each and the order of disorder is Cd(II) > Zn(II) > Pb(II).

scholarly journals Process Optimization Study of Zn2+ Adsorption on Biochar-Alginate Composite Adsorbent by Response Surface Methodology (RSM)

Water ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 325 ◽  
Author(s):  
Subrata Biswas ◽  
Manisha Bal ◽  
Sushanta Behera ◽  
Tushar Sen ◽  
Bhim Meikap
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Metal Ion ◽  
Ion Concentration ◽  
Quadratic Model ◽  
Effective Parameters ◽  
Composite Adsorbent ◽  
Independent Variables ◽  
Optimization Study ◽  
Adsorbent Dose

A novel biochar alginate composite adsorbent was synthesized and applied for removal of Zn2+ ions from aqueous solution. Kinetics, equilibrium and thermodynamic studies showed the suitability of the adsorbent. From a Langmuir isotherm study, the maximum monolayer adsorption capacity of the composite adsorbent was found to be 120 mg/g. To investigate the effect of process variables like initial Zn2+ concentration (25–100 mg/L), adsorbent dose (0.4–8 g/L) and temperature (298–318 K) on Zn2+ adsorption, response surface methodology (RSM) based on a three independent variables central composite design of experiments was employed. A quadratic model equation was developed to predict the relationship between the independent variables and response for maximum Zn2+ removal. The optimization study reveals that the initial Zn2+ concentration and adsorbent dose were the most effective parameters for removal of Zn2+ due to higher magnitude of F-statistic value which effects to a large extent of Zn2+ removal. The optimum physicochemical condition for maximum removal of Zn2+ was determined from the RSM study. The optimum conditions are 43.18 mg/L initial metal ion concentration, 0.062 g adsorbent dose and a system temperature of 313.5 K. At this particular condition, the removal efficiency of Zn2+ was obtained as 85%.

Sign in / Sign up

Export Citation Format

Share Document