Impact sound transmission: experiments of control at the receiver room

2021 ◽  
Vol 263 (1) ◽  
pp. 5595-5599
Author(s):  
Davi Akkerman ◽  
Paola Weitbrecht ◽  
Mariana Shieko ◽  
Marcel Borin ◽  
Leonardo Jacomussi
Keyword(s):  
Social Housing ◽  
Sound Transmission ◽  
Field Tests ◽  
Sound Level ◽  
Sound Insulation ◽  
Total Cost ◽  
Acoustic Performance ◽  
The Impact ◽  
Insulation Performance

Considering Impact sound level requirements accomplishment in Brazil, floating floors are still considered as an inviable solution for building companies due to the implications in the total cost of building, mainly for social housing. Alternative and sometimes cheaper solutions are those undertaken in the receiver room. However, the lack of laboratory and field tests on the acoustic performance of this type of system is still a barrier for acoustic designing in Brazil. The aim of this paper is to study and validate different constructive solutions developed jointly with building companies for improving the impact sound insulation performance on the receiving room of new Brazilian housing constructions.

Effect of ceiling and dry-type double floor on heavy-weight floor impact sound in concrete building and CLT building.

2021 ◽  
Vol 263 (3) ◽  
pp. 3064-3072
Author(s):  
Takashi Yamauchi ◽  
Atsuo Hiramitsu ◽  
Susumu Hirakawa
Keyword(s):  
Frequency Band ◽  
Sound Level ◽  
Center Frequency ◽  
Sound Insulation ◽  
Octave Band ◽  
Band Center ◽  
Heavy Weight ◽  
Concrete Building ◽  
Floor Structure ◽  
Insulation Performance

The air layer between the interior finishes and the structure is used as piping and wiring space. In many cases, ceilings and dry-type double floors are commonly constructed in Japan. However, the effect of the air layer of ceilings and dry-type double floors on the heavy-weight floor impact sound insulation performance has not yet quantitatively investigated. Therefore, in this study, the same floor and ceiling structures were constructed for concrete and CLT buildings, and the heavy-weight floor impact sound was investigated. As results, it was confirmed that the reduction amount of the heavy-weight floor impact sound by the ceiling tended to be smaller in CLT buildings than in concrete buildings. However, the trends were similar. Due to the dry-type double floor structure, the heavy-weight floor impact sound level was increased in concrete building and decreased in CLT building at 63 Hz in the octave band center frequency band. Therefore, it can be said that the dry-type double floor structure can be used to improve the heavy-weight floor impact sound performance in the CLT building.

Research on the Insulation Performance of Sound-Isolating and Decoupled Tiles

2013 ◽  
Vol 457-458 ◽  
pp. 703-706 ◽  
Author(s):  
De Jin Qian ◽  
Xue Ren Wang ◽  
Xu Hong Miao
Keyword(s):  
Large Scale ◽  
Acoustic Radiation ◽  
Single Point ◽  
Mechanical Vibration ◽  
Sound Insulation ◽  
Acoustic Performance ◽  
Operating Modes ◽  
Insulation Effect ◽  
Vibration And Sound Radiation ◽  
Insulation Performance

The acoustic performance of sound-isolating and decoupled tiles is studied from macroscopic and microscopic. First, the sound absorption and reverse sound insulation performance of sound-isolating and decoupled tiles is studied based on laminated media; then the acoustic decoupling materials influence on acoustic radiation of double cylindrical shell underwater is studied, using a double-layer cylindrical structure of large-scale as experimental model .There are large amount of operating modes designed in this experiment, such as all laying, partial laying, laying and so on. The results show that sound-isolating and decoupled tiles not only have the effect of weakening the absorption of reflections, but also have reverse sound insulation effect, which increases as frequency increases; for single point mechanical vibration, the tiles can effectively inhibit vibration and sound radiation of high frequency in the double shell.

scholarly journals Proposal of an Assessment Method of the Impact Sound Insulation of Lightweight Floors

Buildings ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 13
Author(s):  
Łukasz Nowotny ◽  
Jacek Nurzyński
Keyword(s):  
Sound Pressure ◽  
Residential Buildings ◽  
Assessment Method ◽  
Sustainable Construction ◽  
Sound Insulation ◽  
Indicator Values ◽  
Floor Covering ◽  
Acoustic Performance ◽  
Quality Rating ◽  
The Impact

Lightweight floors are in line with a sustainable construction concept and have become increasingly popular in residential buildings. The acoustic performance of such floors plays a pivotal role in the overall building quality rating. There is, however, no clear and complete method to predict their impact sound insulation. A new approximation method and new acoustic indicators—equivalent weighted normalized impact sound pressure levels for lightweight floors—are proposed and outlined in this article. The prediction procedure and indicator values were initially validated on the basis of laboratory measurements taken for different lightweight floors with the same well-defined floor covering. These preliminary analyses and comparisons show that the proposed method is promising and should be fully developed on the basis of further research.

Research on the Prediction of Impact Sound Insulation to a Homogeneous Wall

2015 ◽  
Vol 744-746 ◽  
pp. 1593-1596
Author(s):  
Shang You Wei ◽  
Xian Feng Huang ◽  
Zhi Xiang Zhuang ◽  
Jun Xin Lan
Keyword(s):  
Energy Analysis ◽  
Sound Transmission ◽  
Sound Insulation ◽  
Statistical Energy Analysis ◽  
Analysis Framework ◽  
Mechanism Of Impact ◽  
Sound Reduction ◽  
The Impact ◽  
Insulating Properties ◽  
Reduction Index

In this paper, a theoretical model to evaluate impact sound transmission through a homogeneous wall is proposed. The model which is based on the Statistical Energy Analysis framework exhibits a system with room-wall-room. For the purpose to explore the mechanism of impact sound transmission through a wall, the impact sound reduction index between two rooms are predicted. Meanwhile, the variation of impact sound reduction index with the walls properties are also taken into account. The results reveal that the density, elastic modulus and thickness of a homogeneous wall have diverse effects on its impact sound insulation and can be chosen adequately to achieve ideal insulation values.It provides an approach to optimize impact sound insulating properties of the walls.

A Model for the Fast Determination of Modal Sound Transmission of Large Rectangular Opening

2020 ◽  
Vol 142 (6) ◽  
Author(s):  
Jiazhu Li ◽  
Rui Zhang ◽  
Shen Chen ◽  
Can Li ◽  
Jian Chen
Keyword(s):  
Wave Equations ◽  
Three Dimensional ◽  
Sound Transmission ◽  
Computational Effort ◽  
Sound Insulation ◽  
Fast Determination ◽  
High Frequencies ◽  
Higher Order Modes ◽  
Insulation Performance

Abstract The existence of openings affects the sound insulation performance of structures significantly. The determination of sound transmission through large rectangular openings is often time-consuming, because of the large number of modes, especially if there is a need to go to high frequencies. A model is proposed and detailed based on three-dimensional wave equations, the transfer matrix method, and modal superposition. The viscous and thermal boundary layer effects have been concerned; hence, the model accuracy for narrow slits was improved. The computational effort is significantly decreased by neglecting the cross-modal sound transmission. The accuracy of this model is validated by comparing it with the existing model, the measurement, and the acoustic finite element method. The study of sound transmission behavior of higher-order modes is performed. The modal sound transmission is predicted and compared for several modes. The phenomenon that is different from that of the plane wave situation is found and discussed.

scholarly journals Lightweight ventilated façade: Acoustic performance in laboratory conditions, analysing the impact of controlled ventilation variations on airborne sound insulation

2020 ◽  
Vol 27 (4) ◽  
pp. 367-379
Author(s):  
Joan Lluis Zamora Mestre ◽  
Andrea Niampira
Keyword(s):  
Sound Insulation ◽  
Air Cavity ◽  
Acoustic Performance ◽  
Controlled Ventilation ◽  
Laboratory Conditions ◽  
Airborne Sound ◽  
Cavity Thickness ◽  
Ventilated Facade ◽  
The Impact ◽  
Real Building

The use of double-sheet enclosures with an intermediate non-ventilated air cavity guarantees a higher airborne sound insulation. The insulation advantages depend on air tightness and the placement of sound absorbing material in the air cavity. The lightweight ventilated façade is a system constructed by the addition of an external light cladding on a heavy single wall to establish an intermediate air cavity. This air cavity can be ventilated under controlled cooling effects, because of Sun’s radiation, and to reduce the risk of dampness caused by rainwater. Owing to this ventilation, acoustic insulation of the lightweight ventilated façade could be less effective. However, some authors indicate that air cavity moderate ventilation does not necessarily lead to a significant reduction in the airborne sound insulation. The authors previously verified this situation in a real building where the existing façade of masonry walls was transformed into a lightweight ventilated façade. The preliminary results indicate the acoustic benefits can be compatible with the hygrothermal benefits derived from controlled ventilation. This article presents the next step, the evaluation of the lightweight ventilated façade acoustic performance under laboratory conditions to revalidate the previous results and refining aspects as the air cavity thickness or the state of openings ventilation. The main results obtained indicate that the airborne sound insulation in laboratory is aligned with the previous results in a real building. Air cavity thickness from 110 to 175 mm and ventilation openings from 0% to 3.84% of the façade area does not lead to a significant reduction in the airborne sound insulation.

scholarly journals Indoor Acoustic Comfort Provided by an Innovative Preconstructed Wall Module: Sound Insulation Performance Analysis

2020 ◽  
Vol 12 (20) ◽  
pp. 8666
Author(s):  
Dimitra Tsirigoti ◽  
Christina Giarma ◽  
Katerina Tsikaloudaki
Keyword(s):  
Energy Performance ◽  
Bearing Steel ◽  
Sound Insulation ◽  
Frequency Noise ◽  
Indoor Environmental Quality ◽  
Exterior Surface ◽  
Acoustic Performance ◽  
Insulation Materials ◽  
Acoustic Comfort ◽  
Insulation Performance

The complicated nature of indoor environmental quality (IEQ) (thermal, visual, acoustic comfort, etc.) dictates a multi-fold approach for desirable IEQ levels to be achieved. The improvement of building shells’ thermal performance, imposed by the constantly revised buildings’ energy performance regulations, does not necessarily guarantee the upgrade of all IEQ-related aspects, such as the construction’s acoustic quality, as most of the commonly used insulation materials are characterized by their low acoustic performance properties. From this perspective the SUstainable PReconstructed Innovative Module (SU.PR.I.M.) research project investigates a new, innovative preconstructed building module with advanced characteristics, which can, among other features, provide a high quality of acoustic performance in the indoor space. The module consists of two reinforced concrete vertical panels, between which the load bearing steel profiles are positioned. In the cavity and at the exterior surface of the panel there is a layer of thermal insulation. For the scope of the analysis, different external finishing surfaces are considered, including cladding with slate and brick, and different cavity insulation materials are examined. The addition of Phase Change Materials (PCM) in different mix proportions in the interior concrete panel is also examined. For the calculation of the sound insulation performance of the building module the INSUL 9.0 software is used. The results were validated through an experimental measurement in the laboratory in order to test the consistency of the values obtained. The results indicate that the examined preconstructed module can cover the sound insulation national regulation’s performance limits, but the implementation of such panels in building constructions should be carefully considered in case of lower frequency noise environments.

An improved approach for normal-incidence sound transmission loss measurement using a four-microphone impedance tube

2020 ◽  
pp. 107754632092690
Author(s):  
Zechao Li ◽  
Sizhong Chen ◽  
Zhicheng Wu ◽  
Lin Yang
Keyword(s):  
Transfer Matrix ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Normal Incidence ◽  
Sound Insulation ◽  
Sound Transmission Loss ◽  
The Common ◽  
Wavefield Decomposition ◽  
Insulation Performance

The main aim of this study is to introduce an improved method for determining the sound properties of acoustic materials which is more precise than the common wavefield decomposition method and simpler than the common transfer matrix method. In the first part of the article, a group of formulae for calculating sound transmission loss is represented by combining the wavefield decomposition and transfer matrix methods. Subsequently, a formula for calculating sound absorption coefficients is derived from these formulae by definition. Furthermore, the present formulae are validated by comparing the experimental results achieved with the present formulae and those results obtained by other methods recorded in published articles. Eventually, it is demonstrated that the method can accurately measure the sound insulation performance of materials and the sound absorption properties of limp and lightweight materials.

Apparent impact sound insulation performance of cross laminated timber floors with floating concrete toppings

2021 ◽  
Vol 263 (1) ◽  
pp. 5203-5215
Author(s):  
Jianhui Zhou ◽  
Zijian Zhao
Keyword(s):  
High Performance ◽  
Dynamic Stiffness ◽  
Steel Structures ◽  
Bending Stiffness ◽  
Sound Insulation ◽  
Small Scale ◽  
Cross Laminated Timber ◽  
Mass Timber ◽  
The Impact ◽  
Insulation Performance

Mass timber buildings are gaining increasing popularity as a sustainable alternative to concrete and steel structures. Mass timber panels, especially cross-laminated timber (CLT), are often used as floors due to their dry and fast construction. CLT has poor impact sound insulation performance due to its lightweight and relatively high bending stiffness. Floating concrete toppings are often applied to increase both the airborne and impact sound insulation performance. However, the impact sound insulation performance of floating concrete toppings on CLT structural floors is affected by both the concrete thickness and resilient interlayer. This study investigated the efficiency of both continuous and discrete floating floor assemblies through mock-up building tests using small-scale concrete toppings according to ASTM E1007-16. It was found that the improvements by continuous floating floor assemblies are dependent on the concrete thicknesses and dynamic stiffness of resilient interlayers. The improvements cannot be well predicted by the equations developed for concrete structural floors. The highest apparent impact sound insulation class (AIIC) achieved with continuous floating floor assemblies in this study was 53 dBA, while that of the discrete floating floor assemblies was up to 62 dBA. The discrete floating floor solution showed great potential for use in mass timber buildings due to the high performance with thinner concrete toppings.

Sign in / Sign up

Export Citation Format

Share Document