scholarly journals A A new matrix of MALDI-TOF MS derivative of 9-aminoacridine for lipid identification in positive ions mode

2020 ◽  
Vol 3 (1) ◽  
pp. 66-75
Author(s):  
Jefferson Martins ◽  
Fabio Zappa ◽  
Adilson David Da Silva ◽  
Roberto Pinho ◽  
Thiago Silva ◽  
...  
Keyword(s):  
Low Cost ◽  
High Sensitivity ◽  
Negative Ion ◽  
High Yield ◽  
Suitable Alternative ◽  
Positive Ions ◽  
Fat Liver ◽  
Electronic Dispersion ◽  
Negative Ion Mode ◽  
Accumulation Of Lipids

Matrix-assisted laser desorption/ionization (MALDI) has evolved to become a well- established technique during the last decades. Because of matrix peak interference in the low molecular-weight region, however, new matrices are often studied with the purpose of improving the spectral quality under m/z 500. Herein, we present the substance 2,4,5,7-tetranitro-9-aminoacridine (TNA) as a suitable alternative matrix for lipid detection in the positive-ion mode. TNA is obtained from 9-aminoacridine, a matrix commonly used to analyze lipids in negative-ion mode, with the addition of 4 nitro groups through a synthetic path. The procedure results in a highly conjugated system that presents a bigger electronic dispersion and therefore higher UV absorption. First, we demonstrated the high sensitivity of TNA for retinol. Second, TNA was applied to detect lipids in the liver of the water rat Nectomys squamipes. By using this natural model of hepatic steatosis (fat liver), a condition in which there is excessive accumulation of lipids, TNA provided a clearer identification of three species of polyunsaturated fatty acids (PUFAs) compared to other matrices. TNA presents better sensitivity and spectral resolution, little or no interference from matrix ions, high intensity of signal and low cost with high yield of matrix production.

scholarly journals n-Butylamine for Improving the Efficiency of Untargeted Mass Spectrometry Analysis of Plasma Metabolite Composition

2019 ◽  
Vol 20 (23) ◽  
pp. 5957 ◽  
Author(s):  
Dmitry L. Maslov ◽  
Oxana P. Trifonova ◽  
Elena E. Balashova ◽  
Petr G. Lokhov
Keyword(s):  
Mass Spectrometry ◽  
Direct Injection ◽  
Ammonium Hydroxide ◽  
High Sensitivity ◽  
Negative Ion ◽  
Mass Spectrometry Analysis ◽  
Spectrometry Analysis ◽  
Negative Ion Mode ◽  
Plasma Metabolite ◽  
The Impact

A comparative study of the impact of n-butylamine and traditionally used additives (ammonium hydroxide and formic acid) on the efficiency of the electrospray ionization (ESI) process for the enhancement of metabolite coverage was performed by direct injection mass spectrometry (MS) analysis in negative mode. Evaluation of obtained MS data showed that n-butylamine is one of the most effective additives for the analysis of metabolite composition in ESI in negative ion mode (ESI(−)) The limitations of the use of n-butylamine and other alkylamines in the analysis of metabolic composition and a decontamination procedure that can reduce MS device contamination after their application are discussed. The proposed procedure allows the performance of high-sensitivity analysis of low-molecular-weight compounds on the same MS device in both polarities.

Confounding contaminants in mass spectrometric reaction monitoring

2018 ◽  
Author(s):  
Gilian T. Thomas ◽  
Landon MacGillivray ◽  
Natalie L. Dean ◽  
Rhonda L. Stoddard ◽  
Lars Yunker ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Mass Spectrometric ◽  
Negative Ion ◽  
Reaction Monitoring ◽  
Schlenk Flask ◽  
Dynamic Analyses ◽  
Rubber Septa ◽  
Negative Ion Mode ◽  
Mode A

<p>Reactions carried out in the presence of rubber septa run the risk of additives being leached out by the solvent. Normally, such species are present at low enough levels that they do not interfere with the reaction significantly. However, when studying reactions using sensitive methods such as mass spectrometry, the appearance of even trace amounts of material can confuse dynamic analyses of reactions. A wide variety of additives are present in rubber along with the polymer: antioxidants, dyes, detergent, and vulcanization agents, and these are all especially problematic in negative ion mode. A redesigned Schlenk flask for pressurized sample infusion (PSI) is presented as a means of practically eliminating the presence of contaminants during reaction analyses.</p>

Visible Light Assisted Hantzsch Reaction: Synthesis of Polycyclic Dihydropyridines

2019 ◽  
Vol 16 (8) ◽  
pp. 676-682
Author(s):  
Ankusab Noorahmadsab Nadaf ◽  
Kalegowda Shivashankar
Keyword(s):  
Reaction Time ◽  
Light Intensity ◽  
Ammonium Acetate ◽  
Low Cost ◽  
Aromatic Aldehydes ◽  
Light Irradiation ◽  
High Yield ◽  
Short Reaction Time ◽  
Green Protocol ◽  
Dihydropyridine Derivatives

The polycyclic dihydropyridine nucleus represents the heterocyclic system of invaluable core motifs with wide applications in chemical, biological and physical properties. Although this kind of compounds have been extensively synthesized by other groups, the synthesis of these compounds under CFL light intensity were not explored. The synthesis of polycyclic dihydropyridine derivatives were achieved through the reaction of 4-hydroxycoumarin, aromatic aldehydes and ammonium acetate under CFL light irradiation conditions. A series of polycyclic dihydropyridine derivatives were prepared under CFL light irradiation conditions with high yield, short reaction time, ambient condition and without the use of catalyst. The results displayed an efficient method for the synthesis of polycyclic dihydropyridine derivatives. Clean profile, short reaction time, low cost and use of CFL light intensity instead of catalyst making it a genuinely green protocol.

Using Low Temperature, Cost-effective and Green Methods to Carbon Nanohorn Synthesis

2019 ◽  
Vol 9 (2) ◽  
pp. 157-160
Author(s):  
Ali Hasani
Keyword(s):  
Laser Ablation ◽  
Melting Point ◽  
Palm Olein ◽  
Arc Discharge ◽  
Low Cost ◽  
The Other ◽  
High Yield ◽  
Reaction Field ◽  
Carbon Nanohorns ◽  
Graphite Rod

Background: Laser ablation method has high-yield and pure SWCNHs. On the other hand, arc discharge methods have low-cost production of SWCNHs. However, these techniques have more desirable features, they need special expertness to use high power laser or high current discharge that either of them produces very high temperature. As for the researches, the temperatures of these techniques are higher than 4727°C to vaporize the graphite. So, to become aware of the advantages of SWCNHs, it is necessary to find a new way to synthesize SWCNHs at a lower temperature. In other words, reaction field can be expandable at a moderate temperature. This paper reports a new way to synthesize SWCNHs at an extremely reduced temperature. Methods: According to this study, the role of N2 is the protection of the copper holder supporting the graphite rod by increasing heat transfer from the holder. After the current of 70 A was supplied to the system, the temperature of graphite rod was raised to 1600°C. It is obvious that this temperature is somehow higher than the melting point of palladium, 1555°C, and much lower than graphite melting point, 3497°C. Results: Based on the results, there are transitional precursors simultaneous with the SWCNHs. This composition can be created by distortion of the primary SWCNTs at the higher temperature. Subsequently, each SWCNTs have a tendency to be broken into individual horns. With increasing the concentration of the free horns, bud-like SWCNHs can be produced. Moreover, there are individual horns almost separated from the mass of single wall carbon nanohorns. This structure is not common in SWCNHs synthesized by the usual method such as arc discharge or laser ablation. Through these regular techniques, SWCNHs are synthesized as cumulative particles with diameters about 30-150 nm. Conclusion: A simple heating is needed for SWCNTs transformation to SWCNHs with the presence of palladium as catalyst. The well-thought-out mechanism for this transformation is that SWCNTs were initially changed to highly curled shape, and after that were formed into small independent horns. The other rout to synthesize SWCNHs is the pyrolysis of palm olein at 950°C with the assistance of zinc nitrate and ferrocene. Palm olein was used as a promising, bio-renewable and inexpensive carbon source for the production of carbon nanohorns.

scholarly journals Generation of High-Yield, Functional Oligodendrocytes from a c-myc Immortalized Neural Cell Line, Endowed with Staminal Properties

2021 ◽  
Vol 22 (3) ◽  
pp. 1124
Author(s):  
Mafalda Giovanna Reccia ◽  
Floriana Volpicelli ◽  
Eirkiur Benedikz ◽  
Åsa Fex Svenningsen ◽  
Luca Colucci-D’Amato
Keyword(s):  
Cell Line ◽  
Low Cost ◽  
Neural Cell ◽  
New Drugs ◽  
High Yield ◽  
Time Saving ◽  
Interacting Protein ◽  
Neuronal Marker ◽  
Differentiation Status

Neural stem cells represent a powerful tool to study molecules involved in pathophysiology of Nervous System and to discover new drugs. Although they can be cultured and expanded in vitro as a primary culture, their use is hampered by their heterogeneity and by the cost and time needed for their preparation. Here we report that mes-c-myc A1 cells (A1), a neural cell line, is endowed with staminal properties. Undifferentiated/proliferating and differentiated/non-proliferating A1 cells are able to generate neurospheres (Ns) in which gene expression parallels the original differentiation status. In fact, Ns derived from undifferentiated A1 cells express higher levels of Nestin, Kruppel-like factor 4 (Klf4) and glial fibrillary protein (GFAP), markers of stemness, while those obtained from differentiated A1 cells show higher levels of the neuronal marker beta III tubulin. Interestingly, Ns differentiation, by Epidermal Growth Factors (EGF) and Fibroblast Growth Factor 2 (bFGF) withdrawal, generates oligodendrocytes at high-yield as shown by the expression of markers, Galactosylceramidase (Gal-C) Neuron-Glial antigen 2 (NG2), Receptor-Interacting Protein (RIP) and Myelin Basic Protein (MBP). Finally, upon co-culture, Ns-A1-derived oligodendrocytes cause a redistribution of contactin-associated protein (Caspr/paranodin) protein on neuronal cells, as primary oligodendrocytes cultures, suggesting that they are able to form compact myelin. Thus, Ns-A1-derived oligodendrocytes may represent a time-saving and low-cost tool to study the pathophysiology of oligodendrocytes and to test new drugs.

High‐Yield and Low‐Cost Solar Water Purification via Hydrogel‐Based Membrane Distillation

2021 ◽  
pp. 2101036
Author(s):  
Hengyi Lu ◽  
Wen Shi ◽  
Fei Zhao ◽  
Wenjing Zhang ◽  
Peixin Zhang ◽  
...  
Keyword(s):  
Water Purification ◽  
Low Cost ◽  
Membrane Distillation ◽  
High Yield ◽  
Solar Water

scholarly journals Integrating high-performing electrochemical transducers in lateral flow assay

2021 ◽  
Author(s):  
Antonia Perju ◽  
Nongnoot Wongkaew
Keyword(s):  
High Performance ◽  
Point Of Care ◽  
Low Cost ◽  
High Sensitivity ◽  
Lateral Flow ◽  
Analytical Performance ◽  
Label Free ◽  
High Performing ◽  
Lateral Flow Assays ◽  
Electrochemical Transducers

AbstractLateral flow assays (LFAs) are the best-performing and best-known point-of-care tests worldwide. Over the last decade, they have experienced an increasing interest by researchers towards improving their analytical performance while maintaining their robust assay platform. Commercially, visual and optical detection strategies dominate, but it is especially the research on integrating electrochemical (EC) approaches that may have a chance to significantly improve an LFA’s performance that is needed in order to detect analytes reliably at lower concentrations than currently possible. In fact, EC-LFAs offer advantages in terms of quantitative determination, low-cost, high sensitivity, and even simple, label-free strategies. Here, the various configurations of EC-LFAs published are summarized and critically evaluated. In short, most of them rely on applying conventional transducers, e.g., screen-printed electrode, to ensure reliability of the assay, and additional advances are afforded by the beneficial features of nanomaterials. It is predicted that these will be further implemented in EC-LFAs as high-performance transducers. Considering the low cost of point-of-care devices, it becomes even more important to also identify strategies that efficiently integrate nanomaterials into EC-LFAs in a high-throughput manner while maintaining their favorable analytical performance.

scholarly journals Dopant-Enriched Nitrogen Gas for Enhanced Electrospray Ionization of Released Glycans in Negative Ion Mode

2021 ◽  
Author(s):  
Katarina Madunić ◽  
Sander Wagt ◽  
Tao Zhang ◽  
Manfred Wuhrer ◽  
Guinevere S.M. Lageveen-Kammeijer
Keyword(s):  
Electrospray Ionization ◽  
Negative Ion ◽  
Nitrogen Gas ◽  
Negative Ion Mode

scholarly journals Design of Low-Cost and High-Strength Titanium Alloys Using Pseudo-Spinodal Mechanism through Diffusion Couple Technology and CALPHAD

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2910
Author(s):  
Chaoyi Ding ◽  
Chun Liu ◽  
Ligang Zhang ◽  
Di Wu ◽  
Libin Liu
Keyword(s):  
Diffusion Couple ◽  
Titanium Alloys ◽  
High Throughput ◽  
Volume Fraction ◽  
Raw Materials ◽  
Low Cost ◽  
High Strength ◽  
High Yield ◽  
Α Phase ◽  
Cr System

The high cost of development and raw materials have been obstacles to the widespread use of titanium alloys. In the present study, the high-throughput experimental method of diffusion couple combined with CALPHAD calculation was used to design and prepare the low-cost and high-strength Ti-Al-Cr system titanium alloy. The results showed that ultra-fine α phase was obtained in Ti-6Al-10.9Cr alloy designed through the pseudo-spinodal mechanism, and it has a high yield strength of 1437 ± 7 MPa. Furthermore, application of the 3D strength model of Ti-6Al-xCr alloy showed that the strength of the alloy depended on the volume fraction and thickness of the α phase. The large number of α/β interfaces produced by ultra-fine α phase greatly improved the strength of the alloy but limited its ductility. Thus, we have demonstrated that the pseudo-spinodal mechanism combined with high-throughput diffusion couple technology and CALPHAD was an efficient method to design low-cost and high-strength titanium alloys.

Sign in / Sign up

Export Citation Format

Share Document