scholarly journals A Two Channels Wireless Electrocardiograph System Using Bluetooth Communication

2021 ◽  
Vol 3 (3) ◽  
pp. 134-140
Author(s):  
RAHMA DIAH ZUHROINI ◽  
Dyah Titisari ◽  
Torib Hamzah ◽  
T. K Kho
Keyword(s):  
Cardiovascular Diseases ◽  
Cardiovascular System ◽  
Real Time ◽  
Error Rate ◽  
Research Method ◽  
Causes Of Death ◽  
Data Communication ◽  
Health Problems ◽  
Electrocardiogram Signal ◽  
Bluetooth Communication

Health problems with cardiovascular system disorders are still ranked high, according to data from the WHO reported that there are about 31% of causes of death globally are cardiovascular diseases. The purpose of this study was to develop a 12 lead electrocardiograph with 2 displays and the HC-05 as a real-time transmitter of heart signal data. The electrocardiogram signal is obtained from the wiretapping by attaching the electrode cable to the Lead I, Lead II, Lead III, aVR, aVL, and aVF leads, then processed on IC AD620, HPF and LPF filters and non-inverting amplifiers and then processed using Arduino UNO for further display. in the form of a signal on the Delphi 7 application. The research method is to measure the heart signal on the ECG Simulator, by testing several BPMs, namely 30, 60, 120 and 240 on each lead. After testing the signal equation at the 0.5mV setting by calculating the error rate, the highest error value is obtained in lead I, lead aVL and aVF of 7.14% and the smallest error is 3.57% error in lead III. Then at the 1mV setting by calculating the error rate, the highest error value in lead aVL is 7.14% and the smallest error is 2.36%. at the 2mV setting by calculating the error rate, the highest error value is obtained in leads aVL and aVF of 5.71% and the smallest error is obtained by an error of 2.1% in lead II. the results of this study are implemented so that in the future an ECG examination can be carried out and then monitored remotely like a doctor's room because the data communication uses bluetooth.

scholarly journals The Effect of Resveratrol on the Cardiovascular System from Molecular Mechanisms to Clinical Results

2021 ◽  
Vol 22 (18) ◽  
pp. 10152
Author(s):  
Roland Gal ◽  
Laszlo Deres ◽  
Kalman Toth ◽  
Robert Halmosi ◽  
Tamas Habon
Keyword(s):  
Cardiovascular Diseases ◽  
Cardiovascular System ◽  
Molecular Mechanisms ◽  
Causes Of Death ◽  
Antioxidant Properties ◽  
Clinical Results ◽  
Beneficial Effects ◽  
Pathological Conditions ◽  
Cardioprotective Effects ◽  
Anti Inflammatory

Cardiovascular diseases are the leading causes of death worldwide. The cardioprotective effects of natural polyphenols such as resveratrol (3,5,4-trihydroxystilbene) have been extensively investigated throughout recent decades. Many studies of RES have focused on its favorable effects on pathological conditions related to cardiovascular diseases and their risk factors. The aim of this review was to summarize the wide beneficial effects of resveratrol on the cardiovascular system, including signal transduction pathways of cell longevity, energy metabolism of cardiomyocytes or cardiac remodeling, and its anti-inflammatory and antioxidant properties. In addition, this paper discusses the significant preclinical and human clinical trials of recent years with resveratrol on cardiovascular system. Finally, we present a short overview of antiviral and anti-inflammatory properties and possible future perspectives on RES against COVID-19 in cardiovascular diseases.

Inflammageing in the cardiovascular system: mechanisms, emerging targets, and novel therapeutic strategies

2020 ◽  
Vol 134 (17) ◽  
pp. 2243-2262
Author(s):  
Danlin Liu ◽  
Gavin Richardson ◽  
Fehmi M. Benli ◽  
Catherine Park ◽  
João V. de Souza ◽  
...  
Keyword(s):  
Cardiovascular Diseases ◽  
Cardiovascular System ◽  
Nlrp3 Inflammasome ◽  
Molecular Mechanisms ◽  
Molecular Targets ◽  
Therapeutic Interventions ◽  
Low Grade ◽  
Cardiovascular Research ◽  
Inflammatory Processes ◽  
Ach Receptors

Abstract In the elderly population, pathological inflammation has been associated with ageing-associated diseases. The term ‘inflammageing’, which was used for the first time by Franceschi and co-workers in 2000, is associated with the chronic, low-grade, subclinical inflammatory processes coupled to biological ageing. The source of these inflammatory processes is debated. The senescence-associated secretory phenotype (SASP) has been proposed as the main origin of inflammageing. The SASP is characterised by the release of inflammatory cytokines, elevated activation of the NLRP3 inflammasome, altered regulation of acetylcholine (ACh) nicotinic receptors, and abnormal NAD+ metabolism. Therefore, SASP may be ‘druggable’ by small molecule therapeutics targeting those emerging molecular targets. It has been shown that inflammageing is a hallmark of various cardiovascular diseases, including atherosclerosis, hypertension, and adverse cardiac remodelling. Therefore, the pathomechanism involving SASP activation via the NLRP3 inflammasome; modulation of NLRP3 via α7 nicotinic ACh receptors; and modulation by senolytics targeting other proteins have gained a lot of interest within cardiovascular research and drug development communities. In this review, which offers a unique view from both clinical and preclinical target-based drug discovery perspectives, we have focused on cardiovascular inflammageing and its molecular mechanisms. We have outlined the mechanistic links between inflammageing, SASP, interleukin (IL)-1β, NLRP3 inflammasome, nicotinic ACh receptors, and molecular targets of senolytic drugs in the context of cardiovascular diseases. We have addressed the ‘druggability’ of NLRP3 and nicotinic α7 receptors by small molecules, as these proteins represent novel and exciting targets for therapeutic interventions targeting inflammageing in the cardiovascular system and beyond.

Pengaruh Kualitas Pelayanan Terhadap Kepuasan Pelanggan di Kantor Perusahaan Umum Badan Urusan Logistik Kota Sampit Kabupaten Kotawaringin Timur

2016 ◽  
Vol 2 (2) ◽  
pp. 1-5
Author(s):  
Masrukin Masrukin ◽  
Hermanto Hermanto
Keyword(s):  
Quality Of Service ◽  
Customer Satisfaction ◽  
Service Quality ◽  
Error Rate ◽  
Research Method ◽  
Statistical Test ◽  
Quality Factors ◽  
Public Companies ◽  
Public Company

Customer satisfaction is influenced by service quality factors, this study aims to find out and analyze how much influence the quality of service on customer satisfaction is felt by customers who use the service of Poor Rice (Raskin) at the Office of Public Companies Logistics Agency (Perum BULOG) in Sampit City Regency East Kotawaringin. The research method used in this study is the method of observation, questionnaire/questionnaire and documentation using a Likert scale and the method of determining the sample used is the error rate of 5% as many as 213 samples. Testing the hypothesis used is a statistical test with the formula "Product moment person". The results showed that there was a very strong correlation between Service Quality and Customer Satisfaction of the Office of Public Company of the Logistics Affairs Agency (Perum BULOG) in the District of East Kotawaringin. As much as 0.9968514278 based on the calculation of Pearson Product Moment value.

Does HbA1cc Play a Role in the Development of Cardiovascular Diseases?

2018 ◽  
Vol 24 (24) ◽  
pp. 2876-2882 ◽  
Author(s):  
Kailash Prasad
Keyword(s):  
Risk Factors ◽  
Cardiovascular Diseases ◽  
Cardiovascular System ◽  
Half Life ◽  
Serum Levels ◽  
Serum Glucose ◽  
Cvd Risk ◽  
Factors Affecting ◽  
Diagnosis And Management ◽  
Coronary Artery Atherosclerosis

Cardiovascular diseases (CVD) may be mediated through increases in the cardiovascular risk factors. Hemoglobin A1c (HbA1c) also called glycated hemoglobin is presently used for the diagnosis and management of diabetes. It has adverse effects on cardiovascular system. This review deals with its synthesis and effects on the cardiovascular system. The serum levels of HbA1c have been reported to be affected by various factors including, the lifespan of erythrocytes, factors affecting erythropoiesis, agents interfering glycation of Hb, destruction of erythrocytes, drugs that shift the formation of Hb, statins, and drugs interfering the HbA1c assay. Levels of HbA1c are positively correlated with serum glucose and advanced glycation end products ( AGE), but no correlation between AGE and serum glucose. AGE cannot replace HbA1c for the diagnosis and management of diabetes because there is no correlation of AGE with serum glucose, and because the half-life of protein with which glucose combines is only 14-20 days as compared to erythrocytes which have a half-life of 90-120 days. HbA1c is positively associated with CVD such as the carotid and coronary artery atherosclerosis, ischemic heart disease, ischemic stroke and hypertension.HbA1c induces dyslipidemia, hyperhomocysteinemia, and hypertension, and increases C-reactive protein, oxidative stress and blood viscosity that would contribute to the development of cardiovascular diseases. In conclusion, HbA1c serves as a useful marker for the diagnosis and management of diabetes. AGE cannot replace HbA1c in the diagnosis and management of diabetes. There is an association of HbA1c with CVD which be mediated through modulation of CVD risk factors.

Generation of biometric sequence using real time electrocardiogram signal

2017 ◽  
Vol 8 (4) ◽  
Author(s):  
SRIKANTH MADIREDDY ◽  
MOH ANA.J ◽  
C.KEERTHI KANTH ◽  
P. SRIHARI REDDY
Keyword(s):  
Real Time ◽  
Electrocardiogram Signal

Wearable Triboelectric Nanogenerators for Heart Rate Monitoring

2021 ◽  
Author(s):  
Sophia Shen ◽  
Xiao Xiao ◽  
Xiao Xiao ◽  
Jun Chen
Keyword(s):  
Heart Rate ◽  
Cardiovascular Diseases ◽  
Causes Of Death ◽  
Heart Rate Monitoring ◽  
Triboelectric Nanogenerators ◽  
Physiological Indicator

Cardiovascular diseases are currently the leading causes of death globally and are projected to remain the leading cause in 2040, making heart rate an important physiological indicator to regularly monitor....

Reducing Culture Reporting Errors in the Microbiology Laboratory

2019 ◽  
Vol 152 (Supplement_1) ◽  
pp. S131-S132
Author(s):  
Kathryn Hogan ◽  
Beena Umar ◽  
Mohamed Alhamar ◽  
Kathleen Callahan ◽  
Linoj Samuel
Keyword(s):  
Real Time ◽  
Error Rate ◽  
Reporting System ◽  
Error Rates ◽  
Tracking Errors ◽  
Corrective Measures ◽  
Safety Awareness ◽  
Before And After ◽  
Set Up ◽  
System Errors

Abstract Objectives There are few papers that characterize types of errors in microbiology laboratories and scant research demonstrating the effects of interventions on microbiology lab errors. This study aims to categorize types of culture reporting errors found in microbiology labs and to document the error rates before and after interventions designed to reduce errors and improve overall laboratory quality. Methods To improve documentation of error incidence, a self-reporting system was changed to an automatic reporting system. Errors were categorized into five types Gram stain (misinterpretations), identification (incorrect analysis), set up labeling (incorrect patient labels), procedures (not followed), and miscellaneous. Error rates were tracked according to technologist, and technologists were given real-time feedback by a manager. Error rates were also monitored in the daily quality meeting and frequently detected errors were discussed at staff meetings. Technologists attended a year-end review with a manager to improve their performance. To maintain these changes, policies were developed to monitor technologist error rate and to define corrective measures. If a certain number of errors per month was reached, technologists were required to undergo retraining by a manager. If a technologist failed to correct any error according to protocol, they were also potentially subject to corrective measures. Results In 2013, we recorded 0.5 errors per 1,000 tests. By 2018, we recorded only 0.1 errors per 1,000 tests, an 80% decrease. The yearly culture volume from 2013 to 2018 increased by 32%, while the yearly error rate went from 0.05% per year to 0.01% per year, a statistically significant decrease (P = .0007). Conclusion This study supports the effectiveness of the changes implemented to decrease errors in culture reporting. By tracking errors in real time and using a standardized process that involved timely follow-up, technologists were educated on error prevention. This practice increased safety awareness in our micro lab.

Application of the Real-Time EtherCAT Technology in Wind Power Control System

2012 ◽  
Vol 580 ◽  
pp. 155-159
Author(s):  
Xiang Ming Wang ◽  
Jin Chao Wang ◽  
Dong Hua Sun
Keyword(s):  
Control System ◽  
Real Time ◽  
Wind Power ◽  
High Speed ◽  
Communication Protocol ◽  
Data Communication ◽  
Data Acquisition System ◽  
Slave System ◽  
The Real ◽  
Wind Power System

In this paper, the real-time EtherCAT technology is introduced in detail, which including operating principle, communication protocol and the superiority performance of EtherCAT i.e. synchronicity, simultaneousness and high speed. To show how to design a slave system that considering the characteristics of application, the method of developing systems based no EtherCAT technology are proposed. Finally, a data acquisition system based on EtherCAT technology is designed. Application of EtherCAT technology can improve the real-time characteristics of data communication in wind power system.

RANCANG BANGUN TRACKING ARAH TEMBAKAN MENGGUNAKAN SENSOR POSISI BERBASIS PID

2021 ◽  
Vol 7 (1) ◽  
pp. 43-48
Author(s):  
Agung Raharjo ◽  
Eko Kuncoro ◽  
Imam Azhar
Keyword(s):  
Real Time ◽  
Data Communication ◽  
Raspberry Pi ◽  
Long Distance ◽  
Visualization System ◽  
Control Command ◽  
Combat Unit ◽  
Army Personnel ◽  
Automation Technology ◽  
Research Show

Seiring dengan perkembangan teknologi komunikasi dan otomasi, pelaksanaan tugas militer dapat dibantu dengan mengembangkan alutsista militer. Salah satunya pengembangan robot tempur yang akan digunakan sebagai alat untuk membantu tugas operasi jarak jauh pada satuan tempur TNI AD. Pada robot tempur tersebut akan ditanamkan sistem komunikasi data berupa perintah kendali laju robot, perintah kendali senjata serang, dan sistem visualisasi yang dapat digunakan untuk mendukung pergerakan robot hingga mencapai sasaran yang ditentukan, serta sebagai sistem penginderaan jarak jauh robot tempur untuk memonitor area musuh yang akan ditinjau. Operator menggunakan sebuah joystick untuk mengendalikan robot tempur dan tablet Android untuk memantau dan mendeteksi arah sasaran. Penelitian ini membahas tentang perancangan pendeteksian sasaran tembak yang dapat dikendalikan dari jarak jauh. Metode yang digunakan adalah metode eksperimen berbasis PID. Penelitian ini berfokus pada pendeteksian sasaran tembak yang nantinya akan terhubung dengan Raspberry Pi 3, sehingga senjata dapat mendeteksi adanya sasaran tembak yang ada di dalam jangkauan sensor posisi. Hasil dari penelitian menunjukkan bahwa robot dapat dikendalikan dengan mudah menggunakan joystick dan secara real-time terlihat pada layar Android yang terpasang pada kontrol joystick tersebut. Selain itu, sistem juga dapat membedakan antara sasaran tembak dan objek yang bukan sasaran tembak. Penelitian ini diharapkan dapat mendukung tugas operasi personel TNI dalam menjalankan misinya dengan memanfaatkan robot tempur. Along with the development of communication and automation technology, the implementation of military duties can be assisted by developing military defense equipment. One of them is the development of a combat robot that will be used as a tool to assist the task of long-distance operations on the Army combat unit. In the combat robot, a data communication system will be implanted in the form of a robot rate control command, an attack weapon control command, and a visualization system that is used to support the robot's movement to reach the target specified as a combat robot's remote sensing system for monitoring enemy areas to be reviewed. The operator has used a joystick to control the combat robot and to detect the direction of the target can be monitored with an android tablet. This research discusses the design of the detection of target fire that can be controlled remotely. The method used is experimental based on PID. This research focused on detecting firing targets that will be connected with Raspberry Pi 3 so that the weapon can detect the presence of firing targets within the position sensor. The results of the research show that the robot can be easily controlled using a Joystick and in real-time visible on the Android screen mounted on the Joystick control, the system can distinguish between target shooting and non-target objects. This research is expected to support the operational duties of army personnel in carrying out their missions by utilizing combat robots.

Sign in / Sign up

Export Citation Format

Share Document