scholarly journals Comb Former Parameters for a Cotton Seeder

2019 ◽  
Vol 9 (1) ◽  
pp. 4824-4826 ◽  
Keyword(s):  
Technological Process ◽  
New Technology ◽  
Cotton Yield ◽  
Simultaneous Formation ◽  
Isosceles Trapezoid ◽  
Soil Preparation ◽  
Direction Of Movement ◽  
Cotton Seeds ◽  
Output Edge

Success in cultivating cotton largely depends on the timing and quality of soil preparation for sowing and sowing, and the latter, in turn, depends on how it is carried out and on the perfect design of the machines. The aim of the study is to justify the shape of the ridges and the parameters of the moulder to the cotton seeder. The authors proposed a new technology for sowing with the simultaneous formation of ridges. The shape and parameters of the ridge are theoretically substantiated. When performing the shape of the ridge in the form of an isosceles trapezoid and, accordingly, with a height and width of the ridge surface of at least 100 mm and 160 mm, the seed bed is protected from flooding by rain streams. The design of the developed comb moulder to a cotton seeder for the implementation of the proposed technology is given. Theoretically substantiated the main parameters of the crest moulder. It was found that when the input edge of the moulder is 290-320 mm wide, the output edge is 160 mm, the angle of inclination of the side blade to the direction of movement is 20°, the length of the runner of the moulder is 203-215 mm, the height of the side blade is 100 mm and the angle of installation of the side blade to horizon 42-45° ensures highquality implementation of the technological process of formation of ridges. When sowing cotton seeds on the ridges with the simultaneous formation of the ridge, the seedlings of the plants increase, and the cotton yield increases compared to the smooth sowing method of 9.9%.

CONTROL IN REAL TIME THE DENSITY OF PRODUCT AT VARIOUS STAGES OF THE TECHNOLOGICAL PROCESS OF SUGAR PRODUCTION

2020 ◽  
Author(s):  
S.B. Kudryashev ◽  
◽  
N.S. Assev ◽  
R.D. Belashov ◽  
V.A. Naumenko ◽  
...  
Keyword(s):  
Real Time ◽  
Technological Process ◽  
Sugar Industry ◽  
Sugar Production ◽  
Production Processes ◽  
Quality Of Products

The article is devoted to solving one of the most important problems of the development of the sugar industry in Russia – the modernization of sugar production processes. Today, sugar production is actively being modernized, shifting most of its processes to the path of avomatization and optimization to improve the quality of products. This article describes one of the main ways to obtain information about the concentration of sucrose in syrup in the production of sugar.

MODIFYING THE TECHNOLOGICAL PROCESS OF A HAULM TOPPER TO IMPROVE THE QUALITY OF TABLE POTATO

2018 ◽  
pp. 7-12
Author(s):  
АNDREI B. KALININ ◽  
◽  
IGOR Z. TEPLINSKY ◽  
ОLEG V. SMELIK ◽  
ALEKSANDRA А. MANOKHINA ◽  
...  
Keyword(s):  
Technological Process

Effects and Risks of Distance Learning in Higher Education

2020 ◽  
pp. 61-73
Author(s):  
Yu. M. Tsygalov
Keyword(s):  
Higher Education ◽  
Distance Learning ◽  
Online Education ◽  
New Technology ◽  
Negative Consequences ◽  
Higher Education System ◽  
First Results ◽  
Spread Of Infection ◽  
The Cost

The forced work of Russian universities remotely in the context of the pandemic (COVID-19) has generated a lot of discussion about the benefits of the new form of education. The first results were summed up and reports were presented, the materials of which showed that the main goal of online education — the prevention of the spread of infection, - has been achieved. Against this background, proposals and publications have appeared substantiating the effectiveness of the massive introduction of distance learning in Russia, including in higher education. However, the assessment of such training by the population and students in publications and in social networks was predominantly negative and showed that the number of emerging problems exceeds the possible benefits of the new educational technology. Based on the analysis of the materials of publications and personal experience of teaching online, the potential benefits and problems of distance learning in higher education in Russia are considered. It is proposed to consider the effects separately for the suppliers of new technology (government, universities) and consumers (students, teachers, society). It is substantiated that the massive introduction of online education allows not only to reduce the negative consequences of epidemics, but also to reduce budgetary funding for universities, optimize the age composition of teachers, and reduce the cost of maintaining educational buildings. However, there will be a leveling / averaging of the quality of education, and responsibility for the quality of training will shift from the state/universities to students. The critical shortcomings of online education are the low degree of readiness of the digital infrastructure, the lack of a mechanism for identifying and monitoring the work of students, information security problems, and the lack of trust in such training of the population. The massive use of online education creates a number of risks for the country, the most critical of which is the destruction of the higher education system and a drop in the effectiveness of personnel training. The consequences of this risk realization are not compensated by any possible budget savings.

Can Innovative Technologies Overcome HbA1c Disparity for African-American Youth with Type 1 Diabetes?

2021 ◽  
pp. 193229682110213
Author(s):  
Stuart Chalew ◽  
Alan M. Delamater ◽  
Sonja Washington ◽  
Jayalakshmi Bhat ◽  
Diane Franz ◽  
...  
Keyword(s):  
Type 1 Diabetes ◽  
Racial Disparity ◽  
Diabetes Management ◽  
New Technology ◽  
African American Youth ◽  
Glucose Monitoring ◽  
Supportive Role

Achieving normal or near-normal glycemic control as reflected by HbA1c levels in patients with type 1 diabetes (T1D) is important for preventing the development and progression of chronic complications. Despite delineation and dissemination of HbA1c management targets and advances in insulin pharmacology, insulin delivery systems, and glucose monitoring, the majority of children with T1D do not achieve HbA1c goals. In particular, African Americans are more likely not to reach HbA1c goals and have persistently higher HbA1c than Non-Hispanic Whites. Availability of pumps and other technology has not eliminated the disparity in HbA1c. Multiple factors play a role in the persisting racial disparity in HbA1c outcome. The carefully designed application and deployment of new technology to help the patient/family and facilitate the supportive role of the diabetes management team may be able to overcome racial disparity in glycemic outcome and improve patient quality of life.

scholarly journals A Simulation Model of Construction Projects Executed in Random Conditions with the Overlapping Construction Works

2021 ◽  
Vol 13 (11) ◽  
pp. 5795
Author(s):  
Sławomir Biruk ◽  
Łukasz Rzepecki
Keyword(s):  
Simulation Model ◽  
Technological Process ◽  
Construction Projects ◽  
Working Time ◽  
Simulation Studies ◽  
Construction Methods ◽  
The Impact ◽  
Construction Works

Reducing the duration of construction works requires additional organizational measures, such as selecting construction methods that assure a shorter realization time, engaging additional resources, working overtime, or allowing construction works to be performed simultaneously in the same working units. The simultaneous work of crews may affect the quality of works and the efficiency of construction processes. This article presents a simulation model aimed at assessing the impact of the overlap period on the extension of the working time of the crews and the reduction of a repetitive project’s duration in random conditions. The purpose of simulation studies is to provide construction managers with guidelines when deciding on the dates of starting the sequential technological process lines realized by specialized working crews, for sustainable scheduling and organization of construction projects.

Climate impact of an optimised gas treatment on old landfills

2022 ◽  
pp. 0734242X2110701
Author(s):  
Roland Berger ◽  
Joachim Lehner
Keyword(s):  
New Technology ◽  
Landfill Gas ◽  
Calorific Value ◽  
Climate Impact ◽  
Treatment Technology ◽  
Gas Treatment ◽  
Treatment Measures ◽  
Established Fact ◽  
New Treatment

It is a well-established fact that the quality and quantity of landfill gas (LFG) start declining after a landfill is closed to further waste intake. Conventional gas treatment and utilisation systems such as flares and gas-driven engines require a certain quality of LFG: specifically, a sufficient methane concentration. Various measures are utilised to maintain the necessary quality of LFG, including a turn-down of gas extraction rates and a shutdown of low-quality gas wells, resulting in a decline of LFG production. This, however, does not have to be the case. The low calorific value (LCV) LFG capture and treatment technology developed by e-flox and referred to in this article as ‘LCV LFG System’ can significantly increase the collection rate and the amount of treated methane in an old landfill. This article introduces such new treatment measures, describes gas capture calculation methodologies and presents actual results based on a medium-sized landfill in Germany. The study demonstrates, among other things, that the LCV LFG system can reduce the CO2 avoidance costs to roughly 10 €/tCO2eq. We present this new technology as a quick and straightforward measure of dealing with the climate issues related to methane emissions of old landfills.

Influence of Roller on Tooth Height of Internal Spline Formed by Spin-Forming

2012 ◽  
Vol 522 ◽  
pp. 268-271
Author(s):  
Ling Yan Sun ◽  
Qin Xiang Xia ◽  
Xiu Quan Cheng ◽  
Bang Yan Ye
Keyword(s):  
New Technology ◽  
Internal Surface ◽  
Height Distribution ◽  
Forming Force ◽  
Nose Radius ◽  
Forming Process ◽  
Element Simulation ◽  
Gear Manufacturing ◽  
Spinning Force

Spin-forming of part with internal tooth is a new technology of the near-net forming in gear manufacturing field. And the main purpose of the parts spin-forming is to shape teeth on the internal surface of blank. In order to improve the forming quality of internal tooth, the effect of roller on tooth height of spline was investigated by processing experiments and finite element simulation. The result indicates that, for full-radius roller, a large nose radius has also witnessed a discernible growth in spinning force and tooth height; considering the uniformity of tooth height distribution of spun part and decrease in forming force, the bio-conical roller is more suitable for this forming process

scholarly journals CERTIFICATION OF VEGETABLE OILS AND QUALITY CONTROL IN THE TECHNOLOGICAL PROCESS OF PRODUCTION

2019 ◽  
Vol 2019 (4) ◽  
pp. 119-126
Author(s):  
CH Bekmurotov ◽  
Keyword(s):  
Quality Control ◽  
Technological Process ◽  
Vegetable Oils ◽  
Raw Materials ◽  
Cottonseed Oil ◽  
Product Classification ◽  
Cotton Seeds ◽  
The Cost

The article reviewed the certification and quality control of the technological process for the production of vegetable oil. There is a procedure for packaging, quality control of products, determination of quality indicators and quality control of finished products. The procedure for using refined cottonseed oil and its varieties, the requirements for placement and storage of vegetable oils, as specified in the regulatory documents, the quality control of vegetable oils and other solutions for cottonseed oil are provided. The gas analyzer shows a solution for measuring the amount of solution by painting the tubes of a mixture of gas and air in oil. Detailed information on the production of vegetable oils, the cost of raw materials, the level of fat content of cotton seeds and the methods used to produce oil from cotton seeds. Methods for certification of vegetable oils, types of quality control, methods of testing and quality determination are presented. It was shown that the procedure for refined production of cottonseed oils and their types, as well as the state of the product classification of products based on the method of producing vegetable oils for consumer purposes, analysis of the sequence of refined oils and refining processes.

scholarly journals Simulation of rod vibrations process with an independent pendular suspension and vertical stabilization system

2018 ◽  
Vol 56 (4) ◽  
pp. 469-480
Author(s):  
I. S. Kruk ◽  
A. A. Tiunchik ◽  
V. Romanyuk
Keyword(s):  
Technological Process ◽  
Initial Conditions ◽  
Vertical Movement ◽  
Design Stage ◽  
Geometrical Parameters ◽  
Stabilization System ◽  
Special Approach ◽  
Rod Structures ◽  
Design And Testing

Continuous improvement of field sprayer design aimed at performance increase by increasing the working width, requires a special approach to ensure reliability of the supporting rod structure and quality of technological process. The question of rod vibrations, which arise when the driving systems copy field rough surface and abrupt changes in speed of the unit, remains topical. At the design stage of supporting structures of the rods, special attention is paid to the substantiation of its geometrical parameters in the longitudinal and transverse sections; studies of changes in the characteristics of vertical and horizontal vibrations, taking into account the method of the rod hanging and the system used for its stabilization. This allows to ensure the reliability of the rod design and the required quality of the technological process. The article proposes construction of the rod independent pendulum suspension on the sprayer frame and its stabilization system based on the use of damping elements. The analytical studies sequence system was developed for rod vibrations analysis, depending on initial conditions, parameters and characteristics of the used damping elements, under which they are effectively damped. It is shown that at certain numerical values of the geometrical parameters of the rod, the suspension and vibrations damping methods, not only the numerical values of the functions are changed, but also the functions themselves that describe the process of the rod's vertical movement, including cases of resonance. The obtained theoretical results can be used for design and testing of machines with rod working units and allow, at design stages, to simulate the process of movement of various rod structures from external excitatory forces, and to determine patterns of changes in the characteristics of damped vibrations using different damping elements and their installation parameters.

Sign in / Sign up

Export Citation Format

Share Document