MODIFYING THE TECHNOLOGICAL PROCESS OF A HAULM TOPPER TO IMPROVE THE QUALITY OF TABLE POTATO

2018 ◽  
pp. 7-12
Author(s):  
АNDREI B. KALININ ◽  
◽  
IGOR Z. TEPLINSKY ◽  
ОLEG V. SMELIK ◽  
ALEKSANDRA А. MANOKHINA ◽  
...  
Keyword(s):  
Technological Process

CONTROL IN REAL TIME THE DENSITY OF PRODUCT AT VARIOUS STAGES OF THE TECHNOLOGICAL PROCESS OF SUGAR PRODUCTION

2020 ◽  
Author(s):  
S.B. Kudryashev ◽  
◽  
N.S. Assev ◽  
R.D. Belashov ◽  
V.A. Naumenko ◽  
...  
Keyword(s):  
Real Time ◽  
Technological Process ◽  
Sugar Industry ◽  
Sugar Production ◽  
Production Processes ◽  
Quality Of Products

The article is devoted to solving one of the most important problems of the development of the sugar industry in Russia – the modernization of sugar production processes. Today, sugar production is actively being modernized, shifting most of its processes to the path of avomatization and optimization to improve the quality of products. This article describes one of the main ways to obtain information about the concentration of sucrose in syrup in the production of sugar.

scholarly journals A Simulation Model of Construction Projects Executed in Random Conditions with the Overlapping Construction Works

2021 ◽  
Vol 13 (11) ◽  
pp. 5795
Author(s):  
Sławomir Biruk ◽  
Łukasz Rzepecki
Keyword(s):  
Simulation Model ◽  
Technological Process ◽  
Construction Projects ◽  
Working Time ◽  
Simulation Studies ◽  
Construction Methods ◽  
The Impact ◽  
Construction Works

Reducing the duration of construction works requires additional organizational measures, such as selecting construction methods that assure a shorter realization time, engaging additional resources, working overtime, or allowing construction works to be performed simultaneously in the same working units. The simultaneous work of crews may affect the quality of works and the efficiency of construction processes. This article presents a simulation model aimed at assessing the impact of the overlap period on the extension of the working time of the crews and the reduction of a repetitive project’s duration in random conditions. The purpose of simulation studies is to provide construction managers with guidelines when deciding on the dates of starting the sequential technological process lines realized by specialized working crews, for sustainable scheduling and organization of construction projects.

scholarly journals Simulation of rod vibrations process with an independent pendular suspension and vertical stabilization system

2018 ◽  
Vol 56 (4) ◽  
pp. 469-480
Author(s):  
I. S. Kruk ◽  
A. A. Tiunchik ◽  
V. Romanyuk
Keyword(s):  
Technological Process ◽  
Initial Conditions ◽  
Vertical Movement ◽  
Design Stage ◽  
Geometrical Parameters ◽  
Stabilization System ◽  
Special Approach ◽  
Rod Structures ◽  
Design And Testing

Continuous improvement of field sprayer design aimed at performance increase by increasing the working width, requires a special approach to ensure reliability of the supporting rod structure and quality of technological process. The question of rod vibrations, which arise when the driving systems copy field rough surface and abrupt changes in speed of the unit, remains topical. At the design stage of supporting structures of the rods, special attention is paid to the substantiation of its geometrical parameters in the longitudinal and transverse sections; studies of changes in the characteristics of vertical and horizontal vibrations, taking into account the method of the rod hanging and the system used for its stabilization. This allows to ensure the reliability of the rod design and the required quality of the technological process. The article proposes construction of the rod independent pendulum suspension on the sprayer frame and its stabilization system based on the use of damping elements. The analytical studies sequence system was developed for rod vibrations analysis, depending on initial conditions, parameters and characteristics of the used damping elements, under which they are effectively damped. It is shown that at certain numerical values of the geometrical parameters of the rod, the suspension and vibrations damping methods, not only the numerical values of the functions are changed, but also the functions themselves that describe the process of the rod's vertical movement, including cases of resonance. The obtained theoretical results can be used for design and testing of machines with rod working units and allow, at design stages, to simulate the process of movement of various rod structures from external excitatory forces, and to determine patterns of changes in the characteristics of damped vibrations using different damping elements and their installation parameters.

scholarly journals ESTIMATION OF STRUCTURAL SIMILARITY FOR CONTROL OF MICROELECTRONIC PRODUCTS

2019 ◽  
Vol 1 (7) ◽  
pp. 14-18
Author(s):  
Yu. A. Gusman ◽  
Yu. A. Pichugin ◽  
A. O. Smirnov
Keyword(s):  
Production Process ◽  
Technological Process ◽  
Good Reason ◽  
Structural Similarity ◽  
Fixed Number ◽  
Crystal Plate ◽  
Technological Scheme ◽  
Real Sample ◽  
Numerical Example

In this paper we consider the technological process of manufacturing micromechanical gyroscopes, the output of which is divided into cells of the crystal plate and each cell contains a fixed number of product elements. The estimation of structural similarity for measurements of technical characteristics of various devices is offered. A relatively large value of structural similarity assessment means that there is a dependence of the quality of the manufactured devices on the position on the crystal plate. This gives a good reason for further work to improve the quality of the process or to change the technological scheme as a whole. The article considers a numerical example based on a real sample of microelectronic products. The proposed method can be used both in the process of adjustment of the production process and in the rejection of products, when further configuration of the equipment is no longer possible.

scholarly journals ECONOMIC COST-EFFECTIVENES OF ETHYLENE CONSUMPTION IN THE TECHNOLOGICAL PROCESS OF BANANA RIPENING

2021 ◽  
Vol 1 (24) ◽  
Author(s):  
Ivan Stojanović ◽  
Aleksandar Manić ◽  
Silvana Ilić
Keyword(s):  
Treatment Period ◽  
Technological Process ◽  
Economic Cost ◽  
Maturity Level ◽  
Ethylene Concentration ◽  
Ripening Process ◽  
Ethylene Consumption ◽  
Climacteric Fruit ◽  
Reduced Costs

Banana is a climacteric fruit that undergoes a ripening process in airtight chambers at a certain temperature, appropriate ethylene concentration, and the time it takes for the fruit to reach maturity level 4 on the ripening scale. For commercial purposes an ethylene concentration of 1000 ppm is used, and depending on other factors the concentration may vary. Through a research the best result has been achieved with an ethylene concentration of 900 ppm and the fruit exposure to 18C for a treatment period of 120 h. These parameters reduced costs by RSD 91.896,95 at annual level compared to the commercial concentration of ethylene, the quality of the fruit did not deteriorate greater efficiency in business has been achieved.

scholarly journals RESULTS OF TESTING OF MODERN INDIVIDUAL MILKING INSTALLATION

2021 ◽  
Author(s):  
O. Kryshtal ◽  
Keyword(s):  
Technological Process ◽  
Mass Fraction ◽  
Total Duration ◽  
Small Diameter ◽  
First Grade ◽  
Vacuum Pump ◽  
Average Intensity ◽  
Milking Machine ◽  
The Individual

The purpose of the research: comprehensive assessment of the individual milking unit of the company "Kurtsan" (Turkey) during operation. Methods of research: Analysis of the structural features of the individual milking unit performed by the observation method given to test sample, the quality of the machine was evaluated by standardized methods: the quality of the technological process and operational-technological indicators in accordance with the SOU 74.3-37-273, energy indices according to DSTU 2331, economic Indicators according to DSTU 4397, safety indicators and ergonomics according to DSTU IEES 60335-1, DSTU EN 60335-2-70. Research Results: The conducted research confirms a sufficiently high quality of the technological process of selection of milk in cows in the conditions of use of milking installation in a personal economy, which provides favorable conditions for the milking of the cow, taking into account its physiological features. Performance per hour of basic time is 10 heads. Milking installation works on the principle of a closed milking system, thanks to which milk does not contact the environment and immediately from the basin enters a sealed can. Such system protects milk from the possibility of bacterial and physical contamination. Milk obtained during milking by milking installation according to quality indicators (acidity, density, content of somatic cells, mass fraction of dry matter, mass fraction of fat) meets the requirements for the first grade according to DSTU 3662. Milking installation is equipped with a dry vacuum pump. Power consumption during installation does not exceed 0.54 kW. Specific electricity consumption for milking of one cow is 0.05 kWh / head. Annual operating expenses for milking of two cows in the farm are 1591.90 UAH / head. Conclusions. According to the testing of the individual milking plant manufacturing company "KURTSAN", it has been established that this installation reliably performs the technological process of machine milking of cows in milking can for their tethered maintenance and allows you to get milk of the first grade. The total duration of visiting one cow is 5.75 minutes. The average intensity of milk is 1.0 kg / min. Milking machine provides complete bodies of cows. The magnitude of the control manual feed is 50 ml. The milking machine is equipped with an adjustable pulsator of pairwise milking, which creates a manual milking process and works for a working vacuum of 40 ± 1 kPa, which prevents injury to dies and diseases of mastitis. In the cover the "Stop-Milk" system is installed, which prevents milk from entering a vacuum pump during the overflow of the poor, or water while washing All items are compactly assembled on a single cart. However, a small diameter of wheels on an unequal surface creates some inconvenience to the operator during the transportation of the machine with a filled milk capacity. The application of the installation increases the amount of milk received. Its gentle work does not harm the emotional and physical health of the cow: the dysfunctions during operation are not pushed, and light vibration creates a massage effect. Milking installation allows you to significantly reduce the labor of service personnel in an economy with a maintenance of 1 to 10 cows.

scholarly journals Laser Welding Of Finned Tubes Made Of Austenitic Steels

2015 ◽  
Vol 60 (3) ◽  
pp. 1807-1812
Author(s):  
M. Stolecki ◽  
H. Bijok ◽  
Ł. Kowal ◽  
J. Adamiec
Keyword(s):  
Laser Welding ◽  
Austenitic Steel ◽  
Technological Process ◽  
Welded Joints ◽  
Austenitic Steels ◽  
Tube Production ◽  
High Quality ◽  
Manufacturing Costs ◽  
Finned Tubes

Abstract This paper describes the technology of welding of finned tubes made of the X5CrNi1810 (1.4301) austenitic steel, developed at Energoinstal SA, allowing one to get high quality joints that meet the requirements of the classification societies (PN-EN 15614), and at the same time to significantly reduce the manufacturing costs. The authors described an automatic technological line equipped with a Trumph disc laser and a tube production technological process. To assess the quality of the joints, one performed metallographic examinations, hardness measurements and a technological attempt to rupture the fin. Analysis of the results proved that the laser-welded finned tubes were performed correctly and that the welded joints had shown no imperfections.

scholarly journals Quality control of aluminium melt in production process

2016 ◽  
Vol 61 (Special Issue) ◽  
pp. S43-S47 ◽  
Author(s):  
M. Kotus ◽  
E. Jankajová ◽  
M. Petrík
Keyword(s):  
Quality Control ◽  
Chemical Composition ◽  
Production Process ◽  
Aluminium Alloy ◽  
Technological Process ◽  
Casting Alloy

The quality of aluminium alloy in the production process on the chemical composition basis was evaluated. The quality of casting alloy depends on the chemical composition of melt and on the technological process of production process. The basic elements such as Si, Cu, Fe, Mg and Al in melting were evaluated. The obtained data were compared with the guide data referred to in the standard for aluminium alloy.

scholarly journals Analysis of the criteria of efficiency of work of separators for the field of hydrocarbon raw

2019 ◽  
pp. 114-119
Author(s):  
Valeriy V. Piven ◽  
Vladislav S. Shchelkonogov
Keyword(s):  
Technological Process ◽  
Raw Materials ◽  
Comprehensive Assessment ◽  
Technological Scheme ◽  
Qualitative Composition ◽  
Separation Processes ◽  
Process Flow ◽  
Multi Stage ◽  
Flow Diagrams

Assessment of the quality of separation of hydrocarbon raw during its field preparation is necessary to determine the efficiency of the entire technological process of preparation. The absence of complex criteria for assessing the quality of separation for multi-stage processes does not allow one to obtain unambiguous solutions in justifying the process flow diagrams and equipment for separation. We have analyzed the typical technological scheme of separation of hydrocarbon raw materials and existing criteria for separation processes. It is proposed to use the criterion for a comprehensive assessment of the separation processes of hydrocarbon raw materials, allowing calculating the efficiency of the process, taking into account the possible production of intermediate fractions and their qualitative composition

Sign in / Sign up

Export Citation Format

Share Document